Hot Air Blowers_08-21_v85v1.vgb - Leister

Leister’s hot air blowers: Intelligent and flexible.
Leister’s hot air blowers highlight: The new HOTWIND.
12
4
2
HOTWIND SYSTEM
5
1
3
6
1
2
3
4
5
6
PREMIUM SYSTEM
Heat output and air volume steplessly adjustable with potentiometer • •
Integrated power electronics • •
Protection against heating element or device overheating • •
Brushless blower motor • •
Alarm output •
Integrated temperature control •
Remote control interface for temperature or power set point •
Remote control interface for air volume adjustment •
Integrated temperature probe •
Display for showing the setpoint and actual values (°C or °F) •
General Catalog Process Heat 2012 / 2013
Infinitely adjustable:
Potentiometers for stepless adjustment
of the heating and blower (PREMIUM
and SYSTEM).
Remote controlled:
Interface with alarm contact in the
HOTWIND SYSTEM for controlling the
air volume and heat output, using
4–20 [ mA ] or 0–10 [ V ] signal.
Integrated:
Temperature probe in the
HOTWIND SYSTEM
for even greater precision.
User friendly:
Display on the HOTWIND SYSTEM
provides the user with status
information.
Cleverly combined:
Main switch with integral function
button for programming (SYSTEM).
Cool:
The unit is automatically cooled prior
to switching off by pressing the
function button.
www.leister.com

HOTWIND PREMIUM / SYSTEM: The versatile hot air blower.
Weighing just seven pounds with its detachable handle, HOTWIND can be used both as an integrated or bench-top
device. This enormous flexibility combined with the high maximum temperature of up to 800°C and the wide
range of accessories means that the HOTWIND can be used in a variety of applications.
Hot air blower
HOTWIND PREMIUM / SYSTEM
Installation dimensions in mm
106
83
179 179
16.5 25
70
89.2
332 ±2 (357 ±2 Type
Type 800°C)
187
102
27.5 14
133 (158 Type Type 800°C)
43.6 90
M5x10 deep M5x10 M5x10 deep
198 (223 Type Type 800°C)
171.6
160 (185 Type Type 800°C)
113
62
Technical data HOTWIND PREMIUM / HOTWIND SYSTEM
Voltage V~ 120 230 230 230 230 230 400
Power consumption W 2300 2300 2300 3100 3680 3680 5400
Frequency Hz 50 / 60
Max. air outlet
temperature
www.leister.com General Catalog Process Heat 2012 / 2013
13
Temperature °C
900
800
700
600
500
400
300
200
100
°C 650 650 650 800 650 650 650
Max. air flow (20 °C) l/min 200 – 900
Static pressure kPa 0.8 1.0
Noise emission dB(A) < 70
Weight kg
without cable
2.2 2.3 2.2 2.4
Dimensions see below
Mark of conformity 2
Protection classe II 4
Without connecting plug • • • •
Connecting plug (Euro) • • •
Order no. HOTWIND PREMIUM 140.095 142.612 142.643 142.608 142.609 140.098 142.644
Order no. HOTWIND SYSTEM 142.636 142.646 140.096 142.645 142.640 142.641
Subject to change without notice
Connection voltage non-switchable
Additional versions on request
2300 W
3100 W
3700 W
5400 W
0
0 100 200 300 400 500 600 700 800 900 1000
at 0°C / 101.3 kPa Air flow [l/min]
➡ Accessories page 17
Hot Air Blowers

125.317
107.247
105.917
105.907
105.919
107.253
114.136
105.906
107.265
107.245
107.342
106.174
106.175
107.260
107.259
105.977
107.263
107.262
105.992
105.991
106.143
107.329
107.336
107.335
107.248
141.723
c
b
b
a
d
a
a
a
b
a
a
b
a
b
b
b
Hot air blowers shrink the
film on bulky packages.
Accessories HOTWIND PREMIUM / SYSTEM (Ø 62 mm)
Flange connector, push-fit
a = 90 mm
Extension nozzle, push-fit (a × b)
200 × 45 mm
Tubular nozzle, push-fit (a × b × c)
303 × 153 × 6 mm
354 × 204 × 4.5 mm
456 × 306 × 3 mm
700 × 550 × 1.7 mm
795 × 655 × 1.5 mm
1100 × 1000 × 4 mm
Angled nozzle, push-fit (a × b)
shank length 120 × 112 mm
Round nozzle, push-fit
d = 40 mm
Shell reflector, push-fit (a × b)
400 × 50 mm
400 × 65 mm
400 × 80 mm
Wide slot nozzle, push-fit (a × b)
85 × 15 mm
150 × 12 mm
200 × 9 mm
250 × 12 mm
300 × 4 mm
400 × 4 mm
500 × 4 mm
Sieve reflector, push-fit (a × b)
45 × 75 mm
76 × 75 mm
110 × 152 mm
Sieve reflector, push-fit
∅ 150 mm
Stainless steel filter,
push-fit on air intake
Hand tool kit
(handle and protective tube)
www.leister.com General Catalog Process Heat 2012 / 2013
17
106.956
Temperature probe with plug
1 m cable
Hot Air Blowers