14.04.2013 Views

PUMPING PERFORMANCE - Wood Group

PUMPING PERFORMANCE - Wood Group

PUMPING PERFORMANCE - Wood Group

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Newsfront<br />

sures up to 6,000 psi. “We did think the<br />

length of the pumps might be a problem,”<br />

Ferrier admits, “but there has<br />

been a lot of interest from refineries,<br />

even if they have to be installed along<br />

walkways.” So far, six refineries have<br />

bought the pumps. Fluids pumped include<br />

wash water for desalting, and<br />

light hydrocarbons.<br />

Although many manufacturers<br />

these days offer magnetically coupled<br />

and canned-motor pumps, one of the<br />

pioneers in this market is Hermetic-<br />

Pumpen (Gundelfingen, Germany and<br />

Humble, Tex.), which has delivered<br />

more than 120,000 such units. At the<br />

beginning of March Hermetic took<br />

over sister company Lederle (Gundelfingen,<br />

Germany), which specializes<br />

in liquid-ring vacuum pumps and<br />

rotary piston pumps.<br />

Another canned-motor specialist,<br />

Hayward Tyler Inc. (Colchester, Vt.),<br />

recently delivered a canned-motor<br />

pump and spare motor together worth<br />

DON’T DISCOVER THAT YOUR<br />

PROTECTION IS INADEQUATE —<br />

DEPEND ON FIKE for engineered,<br />

proven solutions.<br />

Blackmer<br />

34 ChemiCal engineering www.Che.Com april 2007<br />

$520,000 to a U.S. specialty chemical<br />

manufacturer. The pump will handle<br />

1,4-dimethyl cyclohexanedicarboxylate<br />

(DMCD) saturated with hydrogen<br />

at 1,850 psi and up to 500°F, and will<br />

run continuously for 18 months between<br />

catalyst changes.<br />

Wanner Engineering (Minneapolis,<br />

Minn.), a firm noted for its Hydra-Cell<br />

positive displacement pumps, recently<br />

introduced magnetically coupled versions<br />

of its Stan-Cor non-metallic<br />

ANSI centrifugal pumps. The Stan-<br />

Cor MK pumps feature an impeller<br />

that can be replaced or trimmed without<br />

replacing the magnetic drive. All<br />

Stan-Cor pumps have casings made<br />

1 - 8 6 6 - 7 5 8 - 6 0 0 4<br />

from thick, carbon-fiber-filled Kynar,<br />

which eliminates the permeation that<br />

can occur with plastic-lined metal casings,<br />

the company says.<br />

Protecting valuable assets<br />

While good pump design is the foundation<br />

for low lifetime costs and reliability,<br />

suitable control systems can go<br />

a long way to aid both these objectives.<br />

Version 5.0 of the PumpSmart PS200<br />

variable-speed drive system from ITT<br />

Monitoring and Control (Seneca Falls,<br />

N.Y.) can cut pump energy use by up to<br />

65%, the company says, through intelligent<br />

control. After calibration based<br />

on just four data points — flowrate<br />

The IMPACT of an EXPLOSION<br />

is COSTLY.<br />

ProVane sliding-vane pump (left) for economical pumping at low<br />

flowrates; the Viking RTP20 (right) for transport applications<br />

• Engineering and application specialists<br />

• Over 60 years of experience in safety<br />

• Process and code compliance knowledge<br />

• Total Explosion Protection Solutions:<br />

- Testing - Isolation<br />

- Venting - Suppression<br />

V I S I T W W W . F I K E . C O M<br />

P R O V E N S A F E T Y S O L U T I O N S F O R O V E R 6 0 Y E A R S<br />

Circle 28 on p. 82 or go to adlinks.che.com/6894-28<br />

Viking Pump

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!