eye showers

More documents

Recommendations

Info

Chemical protection gloves Sekuroka ® -PVC-gloves, sempersoft Acc. to EN 420, EN 388 and EN 374. Light, skin friendly protective glove, anatomically formed and 31 cm long. Gloves have structured gripping surface, coated inside with thin cotton fibre layer. To a great extent, resistant to benzene, alcohol, diluted acids and alkaline soutions, washing and cleansing agents, etc. Suitable for food handling. Approx. 0.5 mm thick. Size Art. No. Pack Qty. (Pair) € 7 0096.2 6 16,35 8 0097.2 6 16,35 9 0098.2 6 15,70 10 T925.2 6 16,35 Sekuroka ® -PVC-long gloves Acc. to EN 420, EN 388 and EN 374. With cuff, made of soft PVC foil. High wearing comfort and excellent touch sensitivity. Also features patterned grip area and skin friendly inner flocked lining. Anti-allergic. Largely resistant against diluted acids and alkali, alcohol, etc. Approx. 0.6 mm thick, lenght 700 mm. Size Art. No. Pack Qty. (Pair) € M 8203.1 1 21,35 L 8204.1 1 21,35 XL 8206.1 1 21,35 456 GLOBAL STEP SRL /Tel/Fax: 031 104 85 87 / Tel: 0742 095 539 / office@global-step.net / www.global-step.net Sekuroka ® -PVC protective gloves Snorkel ® Acc. to EN 420, EN 388 and EN 374. Inner lining made of cotton jersey. With good grip profile for safe handling. Suitable for working with acids, caustic substances and solvents. Length 355 mm, 1.2 mm thick. Size Art. No. Pack Qty. (Pair) € 9 X410.1 1 10,45 10 X411.1 1 10,45 Resistance against chemicals-protective gloves This table is meant as a guideline when selecting the correct chemical protection gloves. All information is based on EN 374. Permeation is the molecular penetration through the glove material. The time required by the chemical to permeate is listed in levels. Attention: The information in the table was established under laboratory conditions (new gloves, no additional mechanical strain, room temperature). As the conditions in everyday practical use often vary from the above conditions, the information in only meant as a guideline when choosing suitable chemical protection gloves. The table does not replace the need for suitability tests to be carried out by the end consumer. For this reason Carl Roth GmbH + Co. KG will not be held responsible and/or accept liability in connection with the information in the above list. Permeation time (Level): Level 1 >10 min Level 4 >120 min n.r. = Level 2 >30 min Level 5 >240 min no recommendation Level 3 >60 min Level 6 >480 min available to date
GLOBAL STEP SRL /Tel/Fax: 031 104 85 87 / Tel: 0742 095 539 / office@global-step.net / www.global-step.net Chemical protection gloves Sekuroka ® -chloroprene gloves Camapren ® Acc. to EN 420, EN 388 and EN 374. Made of polychloroprene with natural latex layer, flock-lined. Gloves are extremely versatile with roughened surface for high touch sensitivity and secure grip. Temperature stable from -30 to +120 °C. Resistant against diluted and semi-concentrated acids, diluted to concentrated alkaline solutions, saturated saline solutions, glycols and glycerin, long-chain alcohols, vegetable and animal fat and oils. Length approx. 310 mm. Total layer thickness 0.65 mm. Size Art. No. Pack Qty. (Pair) € 7 K347.1 2 9,15 8 K348.1 2 9,15 9 K349.1 2 9,15 10 K350.1 2 9,15 11 K351.1 2 9,15 Sekuroka ® -chloroprene gloves Tricopren ® Latex-free. Acc. to EN 420, 388 and EN 374. Made of polychloroprene, with interior cotton lining. Highly resistant to mechanical and a variety of chemical hazards. Anatomic fit. The palm is ribbed for safe grip. Temperature stable from -30 to +70 °C. Suitable for working with diluted and semi-concentrated acids and diluted and concentrated alkaline solutions, for glycols and glycerins, long-chain alcohols, Perhydrol, aliphatic and alicyclic hydrocarbons. Length approx. 300 mm. Total layer thickness 1.3 mm. Size Art. No. Pack Qty. (Pair) € 8 AA08.1 1 24,55 9 AA09.1 1 24,55 10 AA10.1 1 24,55 11 AA11.1 1 24,55 Sekuroka ® -Nitopren ® -gloves Acc. to EN 420, 388 and EN 374. Made with 2 layers of material, top layer chloroprene, inner layer nitril, with thin velour coating. Anatomic fit. Has an extremely high resistance to a number of chemicals and to many aggressive gases. Highly flexible, also enable sensitive work. Secure grip when working with wet and oily objects. Very good mechanical resistance. Free of natural latex. Suitable for the chemical and pharmaceutical industry, galvanic work. Length approx. 310 mm, thickness of layer approx. 0.65 mm. Size Art. No. Pack Qty. (Pair) € 7 ET40.1 2 8,75 8 ET41.1 2 8,75 9 ET42.1 2 8,75 10 ET43.1 2 8,75 11 ET44.1 2 8,75 Sekuroka ® -nitrile gloves Tricotril ® Acc. to EN 420, EN 388 and EN 374. Anatomic fit, with profiled palm. Latexfree, authorized for food processing and preparation. With cotton tricot interior. Suitable for diluted and semi-concentrated acids, alkaline solutions, glycols and glycerin, long-chain alcohols, aliphatic and alicyclic hydrocarbons. Temperature stable: -20 to +60 °C. Length approx. 300 mm. Total layer thickness 1.5 mm. Size Art. No. Pack Qty. (Pair) € 8 CH44.1 1 20,65 9 CH45.1 1 20,65 10 CH46.1 1 20,65 11 CH47.1 1 20,65 457
Page 1 and 2:
GLOBAL STEP SRL /Tel/Fax: 031 104 8
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20: GLOBAL STEP SRL /Tel/Fax: 031 104 8
Page 27 and 28: Respiratory protection Sekuroka ®
Page 69: GLOBAL STEP SRL /Tel/Fax: 031 104 8
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
show all

eye showers

Create successful ePaper yourself

Delete template?

Save as template?