eye showers

More documents

Recommendations

Info

Chemical protection gloves Sekuroka ® -butyl-glove Butoject ® Acc. to EN 420, EN 421, EN 388 and EN 374 parts 1 to 3. For use in the chemical industry, at production sites of paint, lacquer, glue and plastics and for the production and use of herbicides. Temperature stable from -40 to +130 °C. Resist short chained esters, ketones and aldehydes, diluted and concentrated acids and alkali, saturated saline solutions, alcohols, softeners etc. With roll-up cuff. Length approx. 350 mm, 0.7 mm thick. Size Art. No. Pack Qty. (Pair) € 8 K626.1 1 23,65 9 A621.1 1 24,15 10 A622.1 1 24,15 11 A623.1 1 24,15 Sekuroka ® -butyl-gloves Acc. to EN 420, 388, 374-2/-3. Thin chemical protection glove with rough surface in hand area to increase grip of smooth and wet objects. Good finger mobility and sens of touch. Long roll-up cuff. Unlined. Length 350 mm, 0.35 mm thick. Size Art. No. Pack Qty. (Pair) € 7 CE42.1 1 25,30 8 CE43.1 1 25,30 9 CE44.1 1 25,30 10 CE45.1 1 25,30 11 CE46.1 1 25,30 460 GLOBAL STEP SRL /Tel/Fax: 031 104 85 87 / Tel: 0742 095 539 / office@global-step.net / www.global-step.net Sekuroka ® -Viton-gloves Vitoject ® Made of 100 % fluororubber (Viton ® ). In accordance with EN 420, 388 and EN 374. Gastight. Anatomically formed, with roll-up cuff, smooth, powdered. Wide fit allows glove liners to be worn underneath. Suitable for working with particularly aggressive chemicals such as aliphatic, aromatic and chlorinated hydrocarbons, diluted and concentrated acids, saturated salt solutions, long-chain alcohols, glycol and glycerin, aniline, benzene etc. Not resistant against esters and ketones. Please see chemical resistance table! Temperature stable from -10 to +230 °C. Length approx. 350 mm, 0.7 mm thick. Size Art. No. Pack Qty. (Pair) € 8 LH87.1 1 130,10 9 A398.1 1 133,30 10 A399.1 1 133,30 11 A400.1 1 133,30 Sekuroka ® -Viton ® II-gloves Acc. to EN 420, 388 and 374. Thin gloves for chemical protection that are made out of a Viton ® -top layer and Butyl-bottom layer, unlined. Very good flexibility and good touch sensitivity. Hand-specific form, rolled band on cuff. Suitable for working with aromatic, aliphatic and chlorinated hydrocarbons, organic and anorganic acids, alkaline solutions, animal fats and oils. Smooth surface, length 300 mm, thickness 0.3 mm. Size Art. No. Pack Qty. (Pair) € 7 CY66.1 1 66,65 8 CY67.1 1 66,65 9 CY68.1 1 66,65 10 CY69.1 1 66,65 11 CY70.1 1 66,65
GLOBAL STEP SRL /Tel/Fax: 031 104 85 87 / Tel: 0742 095 539 / office@global-step.net / www.global-step.net Cut resistant gloves Cut-resistant gloves The cut-resistant gloves are controlled according to EN Standard 388 (mechanical risks). This standard defines four tests and determines the level. The levels illustrate the efficiency of a glove. Test Level 1 Level 2 Level 3 Level 4 Level 5 Abrasion resistance (cycles) 100 500 2000 8000 Cut resistance (factor) 1,2 2,5 5,0 10,0 20,0 Tear resistance (Newton) 10 25 50 75 Puncture resistance (Newton) 20 60 100 150 Abrasion resistance: Number of test cycles required to fray test glove. Cut resistance: Number of test cycles required at constant speed to cut test glove. Tear resistance: Force required to tear test glove. Puncture resistance: Force required to puncture test glove with a standardized test product. Sekuroka ® -cut resistant gloves Art. No. Abrasion Cut resistance Tear Puncture resistance resistance resistance 0131.1 ff. Level 0 Level 1 Level 4 Level 0 AK82.1 ff. Level 3 Level 5 Level 4 - CA01.1 ff. Level 4 Level 2 Level 4 Level 0 CC05.1 ff. Level 2 Level 1 Level 4 Level 0 E441.1 ff. Level 1 Level 3 Level 4 Level 0 EA32.1 ff. Level 0 Level 3 Level 4 Level 2 EP06.1 ff. Level 3 Level 1 Level 3 Level 1 ET36.1 ff. Level 3 Level 5 Level 4 - HE68.1 ff. Level 2 Level 1 Level 2 Level 1 HH29.1 ff. Level 2 Level 1 Level 3 Level 1 K290.1 ff. Level 3 Level 1 Level 1 Level 1 K961.1 ff. Level 3 Level 4 Level 4 Level 4 KL18.1 ff. Level 4 Level 3 Level 4 Level 1 KL22.1 ff. Level 3 Level 3 Level 4 Level 0 KX84.1 ff. Level 3 Level 5 Level 4 Level 0 PA77.1 ff. - Level 5 Level 4 Level 3 PT65.1 ff Level 4 Level 5 Level 4 Level 4 T076.1 ff. Level 2 Level 1 Level 4 Level 0 X797.1 ff. Level 4 Level 1 Level 3 Level 1 Sekuroka ® -cut resistant gloves Camapur ® Acc. to EN 420, EN 388. • Made of Dyneema ® , seamless tricot with knitted welt • High touch sensitivity and mechanical load, extremely comfortable • Good cut protection value • Washable up to 40 °C • Sterilizable • Areas of application: e.g. electro-industry, precison mechanics and metal processing and manufacturing or as a cut-resistant glove liner • Length approx. 240 mm Size Art. No. Pack Qty. (Pair) € 7 KL22.1 1 11,00 8 KL23.1 1 11,00 9 KL24.1 1 11,00 10 KL25.1 1 11,00 Sekuroka ® -knitted gloves Acc. to EN 420, EN 388. Light protective gloves made of 70 % polyamide and 30 % cotton, white. Can be worn on both sides. Cellular, seamless knit, adapt to the skin. With elastic knitted cuff. Application range: Laboratory work, fine work, light assembly work. Size Art. No. Pack Qty. (Pair) € 7 CC05.1 5 13,15 8 CC06.1 5 13,15 9 CC07.1 5 13,15 10 CC08.1 5 13,15 461
Page 1 and 2:
GLOBAL STEP SRL /Tel/Fax: 031 104 8
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24: GLOBAL STEP SRL /Tel/Fax: 031 104 8
Page 27 and 28: Respiratory protection Sekuroka ®
Page 73: GLOBAL STEP SRL /Tel/Fax: 031 104 8
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
show all

eye showers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?