Pulse generator RUP3-3A - GBS Elektronik GmbH
Pulse generator RUP3-3A - GBS Elektronik GmbH
Pulse generator RUP3-3A - GBS Elektronik GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Pulse</strong> <strong>generator</strong> <strong>RUP3</strong>-<strong>3A</strong><br />
The pulse <strong>generator</strong> <strong>RUP3</strong>-<strong>3A</strong> is a small scale high voltage pulse <strong>generator</strong> for<br />
plasma immersion applications. It includes active switching off of pulses, a voltage<br />
up to -3kV and frequencies up to 10 kHz.<br />
principal scheme of <strong>RUP3</strong>-<strong>3A</strong>
Technical data<br />
Voltage and current<br />
• Voltage 0.... -3000V, adjustable<br />
• average current 100 mA max.<br />
• output impedance 75 Ohm,<br />
• peak current around 40 A (short circuit),<br />
practical values are up to 5A<br />
• maximum output power 300W<br />
pulse shape and frequency<br />
<strong>Pulse</strong> 2kV, 1µs open output: (1)control input,(2)<br />
probe 1:100, (4) monitor output 1:1000. Rise and<br />
fall times are in the order of 50 ns.<br />
• square wave, rise and fall time 50-100 ns,<br />
depending on voltage and load.<br />
• pulse width 0.2 µs - ∞ (useful maximum pulse<br />
width with currents > 100 mA is determined by<br />
the discharge of the internal pulse capacitor of<br />
1µF)<br />
• duty cycle up to 100% possible.<br />
• maximum frequency 10 kHz<br />
mechanical, included items<br />
• 19" rack 6 HE (483 *267 mm), 600 mm deep<br />
• display for voltage and average current<br />
• 10-turn potentiometer on front plate for<br />
adjustment of voltage<br />
• control input 5-10V signal at 200 Ω<br />
• voltage monitor output 1:1000<br />
• current monitor output 100 mV/A<br />
• output with SHV connector,3m output cable<br />
RG59 included.<br />
• manual<br />
environmental conditions<br />
• environmental temperature 5-35°C<br />
• humidity 0-80%, the pulse <strong>generator</strong> is<br />
intended for the use in dry rooms.<br />
• protection class I, IP20<br />
• supply voltage 220V-240V~, 500W max.<br />
safety<br />
• external interlock<br />
• the pulse <strong>generator</strong> is protected by resistors<br />
from damage by arcs or short circuits.<br />
• short circuit currents are limited to 40 A.<br />
• The pulse <strong>generator</strong> is conformal to regulations<br />
about electromagnetic compatibility (EMC).<br />
not included, but strongly recommended<br />
• Arbitrary signal <strong>generator</strong> HP33120A or similar<br />
TTL pulse <strong>generator</strong> for control<br />
• digital oscilloscope, e.g. TDS210 or similar<br />
optional available<br />
• Full computer control via RS232 interface.<br />
• positive voltage<br />
• Voltage adjustment by external programming<br />
voltage 0-10V.<br />
general<br />
• warranty: 12 month<br />
company address<br />
<strong>GBS</strong> <strong>Elektronik</strong> <strong>GmbH</strong><br />
Bautzener Landstr. 22<br />
01454 Großerkmannsdorf<br />
Tel.: ++49 351 217007-0<br />
Fax: ++49 351 217007-21<br />
Email: kontakt@gbs-elektronik.de<br />
http://www.gbs-elektronik.de<br />
Stand:25.2.2004