Graupner New Items 2008

This brochure only shows the 

New Items for 2008! 

The main GRAUPNER FS catalogue is over 

1000 pages long and covers our entire range 

of modelling products. Available from all good model shops. 

We reserve the right alter specifications. All items subject to availability. 

Graupner products are available exclusively through model shops, where you will find expert 

advice and assistance. We will gladly let you know the address of your nearest supplier. 

We accept no liability for printing erros. 1st editon 1/2008 Printed in Germany 

GRAUPNER GmbH & Co. KG . Postfach 1242 . D-73220 Kirchheim/Teck . Germany 

www.graupner.de 

N08.GB

F3J European Championships in Trnava, Slovakia 

Seniors 

1st place: Sebastian Feigl 

2nd place: Tobias Lämmlein 

Senior Team 

1st place 

Juniors 

2nd place: Johannes Weber 

Junior Team 

4th place 

Double victory for the GM-Racing 

Team 

at 2007 Monster Touring Finals in the 

Bremen AWD Dome. 

1 st place: Robert Klier 

“Truggy” line 

1 st place: Stefan Neureither 

“Monster” line 

2007 

Gernot Bruckmann 

Gernot was crowned 2007 German 

Champion at the seventh Open Indoor 

Aerobatics Championships in 

Mannheim. 

New GM Fair stand 

GM exhibited at the German 

modelling fairs with a re-designed 

stand. The open-plan layout, freely 

accessible exhibits and fun racing 

track are intended to give visitors a 

taste of modelling, and first-hand 

experience of the exhibits. 

www.gm-racing.de 

New Items ’08 

3 

Looking back at 2007

Chuck-gliders 

CIRRUS 

Order No. 4029 

Wingspan approx. 660 mm 

4 New Items ’08 

K8 



Order Nos. 4029, 4030, 4031 

● All-wood kit 

● Machine-profiled balsa wood wing panels 

● Laser-cut balsa fuselage 

● Laser-cut sheet balsa tail panels 

WEIHE 50 



4029

4030 

Cross section of the machine-profiled wing panel 

4031 

Specification 

CIRRUS K8 WEIHE 50 

Order No. 4429 Order No. 4030 Order No. 4031 

Wingspan approx. 660 mm 660 mm 660 mm 

Overall length approx. 500 mm 510 mm 535 mm 

All-up weight approx 65 g 50 g 70 g 

● Simple-to-build model 

● Good flying characteristics 

● All-balsa construction 

● Free-flight model 

CIRRUS, Order No. 4029 

The full-size 

● High-performance sailplane 

from Schempp-Hirth 

● Designed by Klaus Holighaus 

● The wingspan of the production 

aircraft is 17.74 m 

K8 Order No. 4030 

The full-size 

● Designed by Rudolf Kaiser, 

produced by Schleicher 

● More than 1100 examples 

of the K8 were built 

● The wingspan of the 

production aircraft is 15 m 

WEIHE 50, Order No. 4031 

The full-size 

● Designed by Hans Jacobs, 

produced by Schleicher 

● First flight in 1938 

● The wingspan of the 

production aircraft is 18 m 


5 

Model aircraft

Free-flight model 

MINI DISCUS 2C 

Order No.4216 


Order No.4216 

● Ready-made model consisting of 

Graupner SOLIDPOR ® high-density 

foam components 

● Decal sheet included in the pack 

● Removable SOLIDPOR ® canopy 

● One-piece wing with winglets 


The illustration shows the model fitted out with accessories

Specification 


Overall length approx. 450 mm 

Wing area 5.4 dm² 

Tailplane area 1.1 dm² 

Total surface area 6.5 dm² 

All-up weight approx. 85 g 

Total surface area 

loading approx. 13 g/dm² 

● Ideal model for the next 

generation of model flyers 

● Superb performance 

● Ready to fly in seconds 

● No glue required 

● Impressive appearance 

with polyhedral wing 

and T-tail 

● Removable wing, 

tailplane and canopy 


7 

Model aircraft

RC electric glider 

SMARAGD 


● Almost Ready to Fly model (ARTF) 

● Built-up wings 

Built-up tailplane 

Sheet balsa rudder 

● GRP / plastic fuselage 

● Two-part wing 

Specification 


Fuselage length approx. 1190 mm 

Wing section MH 32 mod. 

Tailplane section Flat plate 

Wing area approx. 40 dm² 

Tailplane area approx. 10.9 dm² 

Total surface area approx. 50.9 dm² 

All-up weight according 

to fittings min. approx. 1400 g 

RC functions 

Rudder 

Elevator 

Ailerons 

Motor speed 

Recommended accessories 

Servos 

Type Order No. No. off 

C 5077 4103 2 

C 341 4093 2 

Radio control system 

Min. mc-19 Order-Nr. 4821 35 MHz band 




Electric motor and accessories 

Electric motor 

Order No. 

SPEED 600 

8.4 V 

3301 

COMPACT 345Z 

7.4 V 

7738 

COMPACT 400Z 

11.1 V 

7745 

Propeller 

Order No. 

The illustration shows the model fitted out with accessories 

20 x 15 cm 

1335.20.15 

25 x 15 cm 

1341.25.15 

23 x 15 cm 

1336.23.15 

Spinner 

Order No. 

Taper collet 

Order No. 

Flight battery 

Order No. 

6045.5 6062.1 2-LiPo 2100 

7.4 V/2.11 Ah 

7643.2 

6045.5 – 2-LiPo 2100 

7.4 V/2.1 Ah 

7643.2 

6045.4 – 3-LiPo 2100 

11.1 V/2.1 Ah 

7643.3 

Speed controller 

Order No. 

PICO 25 G3.5 

7172.G33 

COMPACT FLY 

7221 

COMPACT FLY 

7221

Replacement parts 

Order No. Description 

4535.1 CFRP canopy cover 

.2 GRP fuselage 

.3 Right / left wing panels 

.4 Tailplane and rudder 

.14 Decal sheet 

● short building time 

● Accurately fitting GRP 

canopy cover 

● Very good performance 

and handling 

● Good thermal sensitivity 

● Both ailerons can be 

raised for braking 


9 

Model aircraft

RC electric-powered model aircraft 

GRAUBELE 2 



Order No.9405 

● Laser-cut plywood ribs and fuselage 

sides 

● Pre-curved aluminium tube wingtips 

● Accurately pre-cut spruce strip 

● JAPICO tissue and Glutofix 

(tissue paste) included 

● Kit includes glasspaper and 

sanding block 

● Detailed GRAUPNER full-size 

quick-build plan 

10 

The GRAUBELE 2 on 

the title page of the 

Graupner Price List No. 

6 of 1937 


from the pioneer period 


Specification 



Wing area approx. 9.2 dm² 


Total surface area 11.2 dm² 




RC functions 

Rudder 

Elevator

Assembly of RC components in the fuselage 


Servos 


C 111 5108 2 

Receiver 

XP 12 FM 35 Order No. 7012 

Receiver battery 

GRAUPNER 4N-120 1/3AA 

NiMH 4.8 V / 120 mAh 


The miniature receiving system replaces the lead ballast 

normally required for the free-flight version. 


Min. X-306 Order No. 4708 to 

mc-24 BLACK EDITION 

Order No. 4795.76, 35 MHz band 

● Original GRAUPNER model 

design dating from 1936 

● RC receiving system concealed 

in the fuselage nose 

● Suitable for tow-launching 

and slope soaring 

● Removable braced wing 

● Plywood / spruce construction 

give that attractive 

old-timer look 


11 

Model aircraft

RC model glider 

ASH 26 



● Film-covered wing, tailplane and 

rudder 

● GRP fuselage 

● Plug-in wing panels with round 

wing joiner 

● Screw-fitting tailplane 

● All control surfaces attached using 

»elastic flap« hinges 

● Factory-fitted elevator pushrod 

12 





Specification 



Wing section RG 8 mod 

Tailplane section symm. 




All-up weight, according 

to fittings min. approx. 2800 g 

RC functions 

Rudder 

Elevator 

Ailerons 

Airbrakes 

Aero-tow release 

Electric version: motor speed

Ersatzteile 


4513.1 Canopy 


.3 Wing panels 

.4 Tailplane and rudder 

.13 Canopy frame 




Order No. 

COMPACT 540 

14.4 V 

7721 

Propeller 

Order No. 

CAM FOLDING PROP 

36 x 24 cm 

1335.36.24 


33 x 18 cm 

1335.33.18 


Servos 


C 3241 3900 4 

C 4041 3916 2 

C 351 5123 2 


Min. mc-19 Order No. 4821 

35 MHz band 


Order No. 

LiPo 3/3200 

11.1 V/3,2 Ah 

7650.3 or 

LiPo 4/3200 

14.8 V/3,2 Ah 

7650.4 


Order No. 

COMPACT 

CONTROL 44S 

7204 

● Short building time 

● Accurately fitting canopy 

● Canopy pre-glued to 

painted canopy frame 

● Very good performance 

and excellent handling 

● Concealed ball-link for 

rudder linkage 

● Airbrakes accurately 

pre-fitted 


13 

Model aircraft

RC aerobatic model glider 

MDM-1-FOX 




● Almost-Ready-to-Fly (ARTF) model 

● Wing and tail panels of hollowmoulded 

CFRP / GRP construction 

● CFRP / GRP fuselage 

● Wing panels plug into fuselage on 

round joiner 

● Tailplane fixed to fuselage using two 

socket-head cap screws 


»elastic-flap« hinges 

● Accurately GRP canopy frame 

The full-size machine of the Swabian Alb 



Specification 



Wing section HQ/W 2.5/11 

Tailplane section NACA 0010 





to fittings approx. 6700 g

Air passenger is strapped for take-off. 

Marius Fink, aviator 

RC functions 

Rudder 

Elevator 

Ailerons 

Airbrakes 

Aero-tow mechanism 


Servos 


DS 3328 5157 4 

DS 8411 5151 2 

DS 8231 5155 1 


Min. mc-19 Order No. 4821 

35 MHz band 



4559.1 Canopy 


.3 GRP / CFRP wing panels 

.4 GRP / CFRP tailplane 

.10 GRP rudder 

.13 GRP canopy frame 



● Accurately fitting GRP 

canopy frame 

● Fully aerobatic 

● Excellent performance 

and handling 

● Airbrakes installed 

The full-size machine when turning in the 

aerobatic box 


15 

Model aircraft

VENTUS 2 cx RC model glider 


VENTUS 2 cx 





● Wing and tail panels of hollow-moulded 

CFRP / GRP construction 

● GRP fuselage 

● Wing panels plug into the fuselage on 

18 mm Ø round steel joiner 

● Tailplane fixed to the fuselage using two 

socket-head cap screws 


»elastic-flap« hinges 

● Camber-changing flaps hinged on the 

underside for optimum butterfly (crow) 

brake settings of inner and centre flaps. 

The illustration shows the model fitted out with accessories. 

Specification 



Wing section HQ/W 3/13 

Tailplane section HQ/W 0/10 





to fittings, min. approx. 9600 g 

Pilot dummy 

not included

RC functions 

Rudder 

Elevator 

Ailerons 

Camber-changing flaps 

Airbrakes 

Aero-tow mechanism 

Retractable wheel 

Wheel brake 



9449.1 Canopy 


.4 CFRP / GRP tailplane 


.30 1 pair winglets, GRP 

.33 CFRP / GRP R.H. outboard wing panel 

.34 CFRP / GRP L.H. outboard wing panel 

.35 CFRP / GRP R.H. inboard wing panel 

.36 CFRP / GRP L.H. inboard wing panel 


Recommended 

accessories 

As on the original machine, 

the canopy can be opend 

to one side. 

Servos 


C 4041 3916 3 

C 3321 5121 3 

C 3241 3900 4 

C 351 5123 2 

C 713 3887 1 


Min. mc-24 BLACK EDITION 


Accessories 


1122 Retract unit 

2890 Aero-tow mechanism 

1064.1 Joystick set 

Cockpit instruments 


● Accurately trimmed canopy 

● Excellent performance and 

handling in the air 

● Plug-in winglets 

● Hinged canopy opens 

up to one side 

Winglets removable 

for the transport 


17 

Model aircraft

RC power model 

Mini LIBELLE 




● Ready-made model 

● Foam wings 

● Styrofoam fuselage nose 

● CFRP tail boom 

● Foam tail panels 

● Infra-red control system 

Specification 




Total surface area approx. 3 dm² 

Total surface area loading 

approx. 2.6 g/dm² 


to fittings approx. 8 g 



Model is charged from the 

transmitter within 8 minutes 

Electro-magnetic 

steering mechanism 

RC functions 

Rudder 

Motor speed 


Order No. 3426 Dry cells for the transmitter 

(4 required)

MICRO FILOU 




● Ready-made model 

● EPP wings 

● EPP fuselage nose 

● EPP tail boom 

● EPP tail panels 

● Infra-red remote control system 


Order No. 3426 Dry cells for the 

transmitter (6 required) 

Specification 






loading approx. 2.3 g/dm² 


Model is charged from the 

transmitter within 8 minutes 

RC functions 

Differential motor speed for steering 

Motor speed control 

Mini LIBELLE 

● Ready-made RC 

electric-powered indoor model 

● Can be flown outdoors in 

totally flat calm conditions 

● Transmitter features integral 

battery charger for the aircraft 

● Flight time approx. 10 min. 

MICRO FILOU 

● Ready-made RC electric-powered 

model aircraft for indoor flying 

● Model and transmitter can 

be programmed to three 

transmission frequencies 

● Can be flown outdoors in totally 

flat-calm conditions 

● Extremely tough (indestructible) 

airframe material 

● Transmitter features integral 

charger for model aircraft 

● Flight time approx. 10 min. 


19 

Model aircraft

RC electric-powered model 

EXTRA 300 SHP Indoor 




● Indoor aerobatic model aircraft 

● Profile construction 

● Assembled from laser-cut Depron ® 

components 

● Laser-cut plywood control surface horns 

● CFRP rod for reinforcements and 

undercarriage 

● Depron ® components with printed finish 

● Wheels, small items and linkage 

hardware pack 

● Motor mount with adjustable 

downthrust and sidethrust 

● Control surface linkage cables 


Stall strip for snap rolls, 

as on full-airfoil aircraft. 


Specification 




Wing loading approx. 7.7 g/dm² 



RC functions 

Rudder, steerable tailwheel 

Elevator 

Ailerons 

Motor speed controller

Recommended 

accessories 

Control surfaces actuated 

by cord cables. 


Electric motor Propeller 

Order No. Order No. 

COMPACT 135 SLOW FLY 

7.4 V 

PROP 

7736 

20 x 11 cm 

2945.20.11 

or 

SLOW FLY 

PROP 

18 x 10 cm 

2945.18.10 

Flight battery Speed controller 


2-LiPo 400 COMPACT 

7.4 V/0.40 Ah CONTROL 12 

7606.2 BEC 

or 

3-LiPo 400 

11.1 V/0,40 Ah 

7606.3 

7183 

Servos 


C 1041 5116.LOSE 4 

Receiver 

XP 10 Order No. 7020 


Min. mx-12 Order No. 4722, 

35 MHz band 

Three-screw motor 

mounting allows 

adjustment of 

downthrust and 

sidethrust. 

● Model of Michael Goulian’s Extra 

300 SHP aerobatic aircraft. 

● The full-size machine was flown 

in aerobatic air races 

● The original aircraft is powered 

by a 350 BHP Thunderbolt 

Lycoming »Reno« IO-580 engine 

● An excellent model for indoor 

aerobatic flying. 

● The thickened wing section 

produces torsionally rigid flying 

surfaces with good bending 

strength, without the nuisance 

of struts 

● The geometric arrangement of 

the thickened wing section and 

the CFRP rod in the wing 

endow the model with the flying 

characteristics of a large-scale 

aeroplane. 

● Low all-up weight even with 

standard components 

● Accurate laser-cutting for simple 

construction 


21 

Model aircraft

RC EDF model aircraft 

BAE HAWK 




● ARTF kit containing painted 

GRP components 

● Red Arrows colour scheme 

● Fully-sheeted built-up wing and tail 

panels, film-covered 

● Fuselage prepared for installation of 

impeller unit 

● Complete air duct system 

● Highly pre-fabricated 

● All small hardware items included 

in the kit 

22 



Specification 

Wingspan 950 mm 

Length approx. 1000 mm 

Wing area approx. 18 dm²/g 

Weight approx. 1100 g 

Impeller Ø 72/69 mm 

RC functions 

Elevator 

Ailerons 

Rudder / steerable nosewheel 

Throttle


Servo 


DS 271 5107 3 – 4 

Receiver 

smc-14 Order No. 7033 


Min. mx-12 Order No. 4722 

35 MHz band 

Electric power system and 

accessories 


GRAUPNER INLINE 420 i electric motor, 

11.1 V 

Order No. 7640.4 

LiPo 4/3200 flight battery, 14.8 V/3.2 Ah 

Order No. 1371.72 

Ducted fan unit 


GRAUPNER GENIUS 40 speed controller 

or 


GRAUPNER GENIUS 70 speed controller 

● Semi-scale model jet 

● Broad speed range 

● Aerobatic capability 

● Easy to launch, capable 

of ground take-off from 

asphalt surface 

● Ground-roll approx. 20 – 30 m 

● Excellent slow-flying 

characteristics 


23 

Model aircraft

RC electric-powered model 

IDX 248 




● Indoor aerobatic model with central 

motor 

● Profile construction 

● Assembled from laser-cut Depron ® 

components 

● CFRP rod for reinforcements and 

undercarriage 

● Depron ® components, printed finish 

● Wheels, small items, linkage 

hardware pack 

● Designed for variable-pitch 

electric motors 

● Cable control surface linkages 


Specification 




Wing loading approx. 9.16 g/dm² 


to fittings approx. 230 – 290 g

Recommended 

accessories 

RC functions 

Rudder 

Elevator 

Ailerons 

Motor speed controller 

Propeller pitch servo for thrust control 



Order No. 

COMPACT 160 

7.2 V 

7700 

COMPACT 160 VA 

7.4 V 

7737 

Propeller 

Order No. 

SLOW FLY PROP 

18 x 10 cm 

2945.18.10 

Variable-pitch 

propeller 

7737.160 



Order No. 

3-LiPo 400 

11.1 V/0,4 Ah 

7606.3 

3 LiPo 400 

11.1 V/0,4 Ah 

7606.3 or 

3-LiPo 800 

11.1 V/0,8 Ah 

7623.3BEC 


Order No. 

COMPACT 

CONTROL 12 BEC 

7183 

Servos 


C 1041 5116.LOSE 4 

Receiver 

XP 10 Order No. 7020 



35 MHz band 

● Indoor aerobatic model with 

central motor 

● Freelance design based on 

a lizard 

● Excellent trainer for variablepitch 

propellers 

● Slow-flying, docile handling, 

whether flying forward or 

upwards and backwards 

● A great indoor aerobatic model 

● The thickened wing section 

produces torsionally rigid flying 

surfaces with good bending 

strength, without the nuisance 

of struts 

● Low all-up weight even with 

standard components 

l Accurate laser-cutting for 

simple construction 


25 

Model aircraft


TERRY S 

Order No. 6297, Order No. 6297.100 (Ready for Radio) 


Order No.6297 

● Almost-Ready-to-Fly model 

assembled from SOLIDPOR 

high-density foam components 

● Pack includes large decal sheet 

● CNC-trimmed carbon-look canopy 

included 

● One-piece wing with CFRP spar 

● No painting required 

● Detailed building instructions 

including stage photos 

Order No. 6297.100 

»Ready for Radio« version 

● Rudder and elevator servos 

factory-installed 

● SPEED 400 PLUS motor unit 

factory-fitted 

● Folding propeller, assembled 

and fitted 

● Control snakes and horns bonded 

in place 

● Wing and tailplane fixings 

factory-installed 

● Canopy mount glued in place 

26 


Specification 



Wing section RG 14 mod. 

Tailplane section NACA 009 







The illustration shows the model fitted out with optional accessories. 

The CAM FOLDING PROP 

lies back flush with the fuselage for aerodynamic efficiency

RC functions 

Rudder 

Elevator 

Throttle 

Recommended 

accessories 

Electric motor and accessories Order No. 6297 

Power set 

Order No. 

SPEED 400 PLUS 

7.4 V 

6091 


Order No. 

GRAUPNER LiPo 2/800 

7.4 V/0.8 Ah 

7623.2BEC 

Accessories Order No. 6297.100 RR 

Receiver 

Order No 

C 8 FM 35 

3172 

Complete power set including 

LiPo battery 


Order No. 

GRAUPNER LiPo 2/800 

7.4 V/0.8 Ah 

7623.2BEC 

Servos for Order No. 6297 


C 261 5125.LOSE 2 


Min. X-306 Order No. 4708 

to mc-24 BLACK EDITION 




6297.1 Carbon-look canopy 


● Mini-format hot-line model 

● Very little building required 


● Removable screw-fitting 

wing and tailplane 

● Also available in a RR version 


27 

Model aircraft

RC electric model aircraft 

Elektro UHU 

Order No. 9400, Order No. 9400.100, Order No. 9400.200, Order No. 9400.300 

Wingspan 1200 mm 


● Ready-made one-piece wing with 

CFRP spar and integral motor pylon 

● The wing is attached using two 

plastic M4 screws fitted from the 

underside - virtually invisible 

● One-piece ready-made fuselage with 

CFRP-reinforced tail boom. The RC 

components are easily accessible 

and fit neatly in pre-formed recesses. 

● Optional tricycle undercarriage, 

allowing realistic-looking ground 

take-off into wind from smooth 

runways. 

● The high-performance wing airfoil 

provides outstanding glide capability. 

● The pack includes tri-lingual building 

instructions and DVD showing the 

model’s assembly. 

28 


Order No. 9400.100 

The RR (Ready for Radio) version is 

powered by a factory-installed SPEED 

400 PLUS 7.4 V power unit including 

CAM FOLDING PUSHPROP. 

The C 231 rudder and elevator servos 

are also pre-fitted. 

The fuselage, wing and tailplane are 

equipped with fixing components and 

CFRP reinforcements. The canopy is 

prepared, ready to install. The horns 

are glued in place, and the servo 

output arms are pre-fitted with swivel 

pushrod connectors. The pack also 

includes a decal sheet, tri-lingual 

operating instructions and undercarriage 

components. 

Receiver 

Type Order No. 

C8 FM 35 3172 


Specification 






Total surface area loading 26 g/dm² 


to fittings approx. 600 g

Includet in 

Order No. 9400.200 

Order No. 9400.200 

Also includes X-306 35 MHz FM radio 

control system including two C 261 

servos, C8 FM receiver and pair of 

crystals. The pack includes tri-lingual 

building instructions and a DVD 

showing the model’s assembly. 


Servos 


C261 5125.LOSE 2 


Min. X-306 Order No. 4708.261.2, 

35 MHz band 

Order No. 9400.300 

Also includes X-306 35 MHz FM radio 

control system with dry cells for 

transmitter and two C 261 servos, 

SPEED 400 PLUS 7.4 V power unit, 

Graupner 6 NiMH-1000 7.2 V / 1.0 Ah 

flight battery, 14 x 10 cm CAM 

FOLDING PUSHPROP, Graupner 

TWIN CHARGER, tri-lingual building 

instructions and a DVD showing 

the model’s assembly. 

Electric power unit and accessories * 

Electric motor / 

speed controller 

Order No. 


7.4 V 

6505 

Propeller and 

spinner 

Order No 

CAM FOLDING 

PUSHPROP 

14 x 10 cm 

1335.14.10L 

Includet in 

Order No. 9400.300 

NiMH 

flight battery 

Order No. 

6N-1400 NiMH 

7.2 V/1.4 Ah 

98868.6ST 

RC functions 

Rudder 

Elevator 

Throttle 

Replacement part 

Order No. 9400.14 Decal sheet 


LiPo 


Order No. 

LiPo-Akku 2/1500 

7.4 V/1.5 Ah 

7638.2 

* With the exception of the LiPo battery, the accessories listed in the table are included in the pack, Order No. 9400.300. 

● SPEED 400 PUSHPROP 

motor unit is very powerful, 

and rapidly propels the 

model to height. 

● The CAM FOLDING PUSHPROP 

concept protects the entire 

power system from landing 

damage, and is extremely 

efficient. 

● Low current drain for long 

flight times 

● Can be flown with two LiPo 

cells or six NiMH cells 

● No painting required 

● Model aircraft »Made in Germany« 

● Ideal thermal flying characteristics 


29 

Model aircraft

RC EDF model aircraft 

BAE HAWK 




● Kit components produced from 

very high-quality moulds 

● Lightweight moulded foam 

components, very accurate fit 

● Semi-scale colour scheme 

and decals 

● Simple to assemble 

● High-quality aluminium damped 

undercarriage legs 

● Maintenance hatch for 

impeller unit 

● All small hardware items 

included 

● Kit includes ducted fan unit 



Specification 





Impeller Ø 92 mm 

RC functions 

Elevator 

Aileron 

Steerable nosewheel (optional rudder) 

Throttle 

Optional retractable undercarriage


Servo 


DS 271 5107 5/6 

Receiver 

smc 14 Order No. 7033 


Min. mx-12 Order No. 4722 

35 MHz band 

Pneumatic retractable tricycle 

undercarriage 

Order No.: 183 

Three retractable undercarriage units 

made of heavy-duty plastic. 

Single-circuit mechanism, i.e. wheels 

retract under compressed air, extend 

under spring pressure. 

Electric power system and 

accessories 


7753 INLINE 570 electric motor, 

14.8 V 

2897 GRAUPNER GENIUS 70 

or 

7207 COMPACT CONTROL 75S 

7659.5 LiPo 5/4800 25 C 

flight battery 18.5 V / 4.8 Ah 

7658.6 LiPo 6/4800 flight battery 

22.2 V / 4.8 Ah 

or comparable types: 

5 or 6 LiPo cells, minimum 

capacity 3200 mAh 

183 Pneumatic retractable 

tricycle undercarriage 

Undercarriage units lock when retracted 

and extended. 

Suitable for model aircraft up to 3 kg 

take-off weight. 

Pack contents: steerable noseleg retract 

mechanism, two main retract mechanisms, 

control valve, compressed air link 

piece, air tank, fixings. 

● Semi-scale model 


● Aerobatic capability 

● Simple to launch, capable of 

ground take-off from asphalt 

and closely-mown grass strips 

● Completely clean air duct 

● Take-off run 20 – 30 m 

● Optional retractable undercarriage 

● Excellent flying characteristics 


31 

Model aircraft


NORTH AMERICAN HARVARD AT-6 





● Conventional all-wood construction 

● Fuselage, wing and tail panels 

assembled and film-covered 

● Ailerons actuated by servos installed 

close to the control surfaces 

● DSS linkages for rudder and elevator 

● Undercarriage, wheels, small items 

● Control surface linkage hardware pack 

Specification 




Empty weight approx. 1400 g 



32 



Lightweight all-wood construction 

RC functions 

Rudder, coupled tailwheel 

Elevator 

Ailerons 

Throttle



9571.1 Canopy 

.2 Fuselage 

.3 Wing panels (centre 

section, outboard panels) 

.4 Tailplane and fin 

.5 Undercarriage 

.7 GRP cowl 


Motor and accessories 


Order No. 

COMPACT 480 

12 V 

7715 

Order No. 

28 x 15 cm 

1318.28.15 

Recommended 

accessories 

Propeller driver 

Order No. 

Servos 


DS 3328 5157 5 



35 MHz band 


Order No. 

7690.5 4-LiPo 3200 

14.8 V/3.2 Ah 

7650.4 

Speed 

controller 

Order No. 

GRAUPNER 

GENIUS 70 

2897 

Motor 

mount 

Order No. 

7690.4 

● ARTF (Almost Ready to Fly) 

● RENO racing colour scheme 

● Full-size machine is powered 

by a 9-cylinder radial engine 

generating around 608 BHP 


33 

Model aircraft


BO 209 MONSUN 







covered in multi-colour film 

● Rudder, elevators and ailerons 

actuated by servos installed close to 

the control surfaces 


● Control surface linkage hardware 

pack 

Recommended 

accessories 




Propeller 


COMPACT 480 28 x 15 cm 

12 V 

1318.28.15 

7715 

or 

28 x 20 cm 

1318.28.20 

Propeller 

driver 

Order No. 

Propeller 

spacer 

Order No. 

Spinner 

Order No. 


Order No. 

7690.5 197.6 1385.42 4-LiPo 3400 

14.8 V/3.4 Ah 

7648.4 or 

3-LiPo 3400 

11.1 V/3.4 Ah 

7648.3 

Specification 







Speed 

controller 

Order No. 

GRAUPNER 

GENIUS 70 

2897.G35 

Motor mount 

Order No. 

7690.4 



9572.1 Canopy 

.2 Fuselage 

.3 Wing panels (centre section 

and outboard panels) 



.7 GRP cowl 

.8 GRP wheel spats 


Servos 


DS 361 5159 4 



35 MHz band


RC functions 

Rudder, coupled nosewheel 

Elevator 

Ailerons 

Throttle 


● ARTF (Almost-Ready-to-Fly) 

● Wing panels plug into the fuselage 

on aluminium joiner tube 

● Full-size machine is certified 

for aerobatics 

● Excellent for aero-towing 

and banner-towing 

● An ideal trainer aircraft 


35 

Model aircraft


B–25 Mitchell 







covered in two colours of film 


● Linkage hardware pack 


Two-part landing flaps 

Specification 









9373.1 Cabin glazing 

.2 Fuselage, complete 

.3 Wings, pair 

.4 Tailplane 

.5 Undercarriage legs 

.7 Two-part GRP 

engine nacelles, pair 

.10 Rudder, pair 


.20 Wing joiner tube 

The illustration shows the model fitted out with accessories.

Recommended 

accessories 

RC functions 


Elevator 

Ailerons 

Throttle 

Electric power system and accessories 

Electric motor Propeller Propeller 

driver 

Order No 


COMPACT 350 25 x 15 cm 7690.9 

8.4 V 

1372.25.15 (2 pcs.required) 

7713 (2 pcs.required) (2 pcs.required) 



Order No. 

3-LiPo 4900 

11.1 V/4.9 Ah 

7662.3 


Min. mx-12 

Order No. 4722, 

35 MHz band 

Large fuselage 

hatch for ease of 

battery changing 


Motor mount 

Order No. 

Order No. 

GRAUPNER 

7690.9 

GENIUS 40 

2896.G35 (2 pcs.required) 

(2 pcs.required) 

Servos 


C 271 

or 

5107 7 

DS 281 5148 7 


● Wings and tailplane removable 

for transport 

● Wing panels plug into fuselage 

on aluminium tube joiner 

● Top fuselage hatch for 

battery access 

Wings and tailplane removable 

for transport. 


37 

Model aircraft

RC electric-powered aerobatic model 








● DSS linkages for rudder and elevator, 

ailerons actuated by servos installed 

close to the surfaces 



pack 

Specification 




Empty weight approx. 


1600 g 


RC functions 


Elevator 

Ailerons 

Throttle 



Servos 


C 5077 4103 4 



35 MHz band 




Order No. 

COMPACT 540 

12 V 

7720 

Order No. 

30 x 20 cm 

1318.30.20 

Propeller 

driver 

Order No. 

6053.50 

or spinner 

1385.60 


Order No. 

4-LiPo 3200 

14.8 V/3.2 Ah 

7650.4 


Order No. 

GRAUPNER 

GENIUS 70 

2897




9565.1 Canopy 

.2 Fuselage 




.7 GRP cowl 

.8 Wheel spats 



● Currently ranks as one of the 

world’s finest aerobatic aircraft 

● Designed and built by 

Walter Extra 

● GRP and CFRP materials 

are used in production of 

the full-size in order to keep 

the take-off weight as low 

as possible. 

● Dss system (Direct Steel 

System) 


39 

Model aircraft

RC aerobatic model 

EXTRA 300 HP 

Order No. 9369, Order No. 9369.MX 





● Fuselage wing and tail panels 


● Pull cable linkage for rudder 

● Direct elevator and aileron linkages 

using servos installed close to the 

control surfaces 

● Undercarriage, fueltank, wheels, 

small items, linkage hardware pack 

Order No. 9369.MX 

Also including OS MAX 120 AX 20 cc 

motor, silencer, glowplug and propeller 


Specification 






RC functions 

Rudder, coupled to tailwheel 

Elevator 

Ailerons 

Throttle 


Recommended 

accessories 


Motor 

Capacity Silencer 

Spacer Propeller 

Order No. 

cc Order No. 


OS MAX 120 AX 

20.0 2703.33 2703.36A 38 x 25 cm 

2703 

1318.38.25 

OS MAX FS 120 SURPASS III 19.96 1886.33 – 36 x 18 cm 

1886 

1316.36.18 

OS MAX FT-160 

2 x 13.26 1431.80 and – 38 x 20 cm 

1412 

3332.7 exhaust 

manifold and 

1001.145 Flex. 

exhaust pipe 

(2 pcs. required, each) 

1318.38.20 

Servos 


C 4041 3916 5 

C 5077 4103 1 



35 MHz band 



9369.1 Canopy 

.2 Fuselage 




.7 GRP cowl 




● As flown by Walter Extra 

● Even more powerful motor 

● Even faster and lighter than 

the EXTRA 300 S. 

Further improved climb 

performance 


41 

Model aircraft

RC aerobatic model 

CARAVELLE 




● Almost-Ready-to-Fly model (ARTF) 




● Wheels, small items, linkage 

hardware pack 

Specification 








RC functions 


Elevator 

Ailerons 

Throttle

Covered in 

multi-colour film 



9388.1 Canopy 

.2 Fuselage 




.7 GRP cowl 


Recommended 

accessories 


Motor 

Order No. 

OS MAX 46 AX 

2701 

OS MAX 46 FXi 

2702 

OS MAX 50 SX 

1933 

OS MAX 55 AX 

2715 

OS MAX FS 52 

SURPASS 

1874 

Capacity 

Silencer Propeller 

cc Order No. Order No. 

7.45 2701.33 28 x 15 cm 

1316.28.15 

7.45 2701.33 28 x 15 cm 

1316.28.15 

8.12 1809.33 or 32 x 15 cm 

1871.72 1316.32.15 

9.0 2715.33 33 x 18 cm 

1318.33.18 

8.56 1874.33 

or 

1411.33 

30 x 15 cm 

1316.30.15 

Glowplug 

Order No. 

1682 

1682 

1682 

1682 

1682 

Servos 


C 5077 4103 5 



35 MHz band 


● ARTF model of an aerobatic aircraft 

fom the 60s (1963) 

● Excellent aerobatic trainer model 

● Docile flight characteristics 


43 

Model aircraft


KADETT 2400 








● Pull-cable rudder linkage 

● Aileron and landing flaps 



● DSS linkage system on elevator 



pack 

● Suitable for aero-towing 



Specification 





to fittings 4900 g 

RC functions 


Elevator 

Ailerons 

Landing flaps 

Throttle



Motor 

Order No 

COMPACT 655 

20 V 

7722 

COMPACT 555 

20 V 

7716 

Propeller 

Order No. 

45 x 25 cm 

1318.45.25 

38 x 20 cm 

1318.38.20 



Order No. 

Order No. 

LiPo battery 3/3200 COMPACT 

11.1 V/3.2 Ah CONTROL 80 

7650.3 

OPTO/BRAKE 

(two required) 7186 

or 

LiPo battery 3/4800 

11.1 V/4.8 Ah 

7660.3 (two required) 

COMPACT 

CONTROL 80 

OPTO/BRAKE 

7186 

Battery link 

lead 

Order No. 

Propeller 

driver 

Order No. 



9376.1 Canopy glazing 

.2 Fuselage 




.7 GRP cowl 



.20 Wing joiner tube 

Motor mount 

3031 7690.7 

Order No. 

7690.6 

3031 7690.7 7690.6 

Servos 


DS 8081 5167 5 

DS 3328 5157 2 

DS 5391 5166 1 


Min. mc-19 Order No. 4821, 

35 MHz band 


● Ideal for towing 

● Wing and tailplane panels plug into 

fuselage using aluminium joiner 

tubes 

● Extremely low landing speed 


45 

Model aircraft

BO 209 MONSUN RC power model 

BO 209 MONSUN 

Order No. 9375.GFK 


Order No. 9375.GFK 


● Fuselage, wing panels, tailplane and 

rudder of GRP construction 

● Pull-cable rudder linkage 

● Elevators, ailerons and landing flaps 



● Undercarriage, fueltank, wheels, 

small items 


pack 

46 



Specification 





to fittings 15000 g 


Servos 


DS 8231 5155 5 

DS 8411 5151 1 

C 4041 3916 1 


Min. mc-19 Order No. 4821, 

35 MHz band

Motor 

Order No. 

Benzinmotor 

ZDZ 80 

1909 

G58 

1905 

Pilot dummy not included 


Capacity 

cc 

Motor 

mount 

Order No. 

RC functions 

Elevator 

Rudder 

Ailerons 

Landing flaps 

Throttle 

Propeller 

Order No. 

80 9375.80 58 x 30 cm 

2966.58.30 

58 9375.58 56 x 30 cm 

2966.56.30 

Silencer 

Order No. 

Exhaust 

manifold 

Order No. 



9375.1 Cabin glazing 

.2 Fuselage 


.4 Tailplane 

.5 Undercarriage unit 

.7 Cowl 

.8 GRP wheel spats 

.10 Rudder 



.20 Aluminium wing joiner tube 

.25 GRP nosewheel spat 

.26 Aluminium noseleg 

.30 Wing tips 

.31 Tailplane tips 

Improved surface finish 

with rivets and panel lines 

Spinner 

Order No. 

Teflon hose 

Order No. 

Spring clamps 

Order No. 

1909.34 1909.52 1387.95 6861.28 6865 

1909.34 1905.52 1387.95 6861.28 6865 


● Improved surface finish on 

fuselage, tailplane and wings: 

imitation rivets and panel lines 

● Compatible with initial version 

● Relatively short building time 

● Ideal tug aircraft for gliders and 

banners 

● Tricycle undercarriage for 

straightforward take-off and 

landing characteristics 

● Low landing speed 


47 

Model aircraft

RC electric-powered miniature helicopters 

micro KOALA 

Order No. 4499 (35 MHz) Rotor Ø approx. 340 mm 

Order No. 4499.41 (41 MHz, for export only) 

Order No. 4498, 4499 

● Semi-scale, untethered indoor model 

helicopter. 

● Completely factory-assembled, 

already test-flown. 

● Four-function FM radio control 

system included in the set. 

● Lithium-Ion-Polymer (LiPo) airborne 

battery supplied. 

● Automatic LiPo battery charger for 

12 V operation, plus mains PSU for 

220 V operation; both included 

in the set. 

Specification 

micro EC 135 micro KOALA 

Order No. 4498 Order No. 4499 

Rotor Ø approx. 340 mm 340 mm 

Length excl. rotor approx. 360 mm 420 mm 

Height approx. 180 mm 180 mm 

Width excl. rotor approx. 100 mm 100 mm 

All-up weight approx. 235 mm 235 mm 

48 


● Set includes eight »AA-size« dry cells 

for the transmitter power supply. 

● Transmitter features integral charge 

socket: can be operated with 

rechargeable cells. 

The illustrations show the model fitted out with accessories. 

RC functions 

Roll 

Pitch-axis 

Yaw 

Rotor thrust (speed)

micro EC 135 

Order No. 4498 (35 MHz) Rotor Ø approx. 340 mm 

Order No. 4498.41 (41 MHz, for export only) 

Radio control system (Included), 

35 MHz band, 41 MHz band 

Upgrade accessories 

Order No. 4490.110 

Aluminium upper rotor head 

Order No. 4490.111 

Aluminium lower rotor head 

and swashplate driver 

Replacement parts for Order No. 4498 


4498.06 Fuselage, incl. skids and 

battery holder 

Replacement parts for Order No. 4499 


4499.06 Fuselage, incl. skids and 

battery holder 

(See instructions for details of additional replacement parts) 

● Expands the proven »micro 47 

ndoor« system 

● Superb stability in the air, can be 

flown accurately after just a short 

period of practice. 

● Two co-axial contra-rotating rotors: 

no tail rotor required. 


49 

Model aircraft

Upgrade components 

For all micro 47G system models 

Super motor heat-sink 

Order No. 4491.122 

Metal swashplate 

Order No. 4490.112R red 

Order No. 4490.112S black 


Aluminium upper rotor head, with shaft 



Aluminium lower rotor head and driver 



Aluminium upper rotor shaft bearing 


Order No. 4490.113S black

The »micro 47G Office Cup« is our coffeebreak 

/ lunch-break challenge; it’s also 

great for the end of the office day, or the 

canteen, the clubhouse or wherever the 

fans of the Graupner micro 47G get 

together. The course is simple to prepare 

and quick to set up, and the set task 

provides exciting competition and any 

amount of fun. The Office Cup is a great 

»interim event«, with one very satisfying 

side-effect: every pilot who has a go will 

find that it improves his piloting capabilities 

and general control of the model. 

The Competition Set contains: 

Instructions including competition 

programme in German, English and 

French. 3 colour-printed self-adhesive 

helipads 3 pre-formed wire external 

loads, sheathed in silicone tubing 

1 pre-formed wire turn-point with 

pennant 

micro 47G Competition Set 


Please see the internet for the exact 

rules and more information. 



51 

Model aircraft

Electric RC Helicopter 


Fully aerobatic electric-powered model helicopter 

Order No. 4497, Rotor Ø approx. 700 mm 


● High-performance indoor / outdoor 

electric-powered model helicopter 

● Unlimited aerobatic capability (3-D) 

● Factory-assembled 

● Powered by brushless motor 

● Motor, speed controller, rechargeable 

battery and HL gyro included in 

the set 

● For three-cell LiPo batteries 

● Supplied in aluminium case, which 

also accommodates the model 

(ready-to-fly), transmitter and 

flight batteries. 

Specification 

Rotor Ø approx. 700 mm 

Length excl. rotor approx. 650 mm 

Height approx. 240 mm 

Width excl. rotor approx. 120 mm 


52 


RC functions 

Roll 

Pitch-axis 

Yaw 

Collective pitch 

Throttle 

Gyro gain 

The illustration shows the model fitted out with optional accessories.

Motor (brushless, included) 

Speed controller (included) 

Gyro system (included) 

Receiver 

SMC16SCAN 35, Order No. 7053 

Servos 


C 261 5125.LOSE 3 

C 231 5109.LOSE 1 

Recommended and essential 

accessories 

Flight battery (included) 

LiPo 3/2100, Order No. 7642.3 

or 

LiPo 3/2100, Order No. 7643.3 

Radio control system (SPCM) 

Min. mx-16S Order No. 4701, 

35 MHz band 

● 3-D electric-powered model 

helicopter with generous excess of 

power 

● Symmetrical three-point swashplate 

linkage (CCPM 120°) 

● High-quality construction: CNCmachined 

aluminium / CFRP 

construction 

● Double-sided servo linkages 

(push / pull linkage) 

● Suitable for beginners, advanced 

pilots and experts 

● Right-hand rotation main rotor 

● Toothed belt tail rotor drive system 

● Auto-rotation freewheel 

● Driven tail rotor for auto-rotation 

● For three-cell LiPo battery 


53 

Model aircraft


LOGO 10 Compact Bausatz 




● Compact outdoor electric model 

helicopter 

● Unlimited aerobatic capability (3-D) 

● Completely factory-assembled 

● For brushless motor 

● Suitable for beginners 

Specification 






54 


HELI-CAMP 2007 with LOGO 10 


RC functions 

Roll 

Pitch-axis 

Yaw 


Motor speed 

Gyro gain 

The illustration shows the model fitted out with optional accessories.



4493.01 Set of main rotor blades 

.02 Set of tail rotor blades 

.03 Canopy, glazing and decals 

.04 Skid landing gear 

.05 Tail boom 

.06 Tail panels 

.07 Main rotor shaft 

.08 Tail rotor shaft 

.09 Blade pivot shaft 

.10 Flybar 

(See instructions for additional replacement parts) 


accessories 

Motor 

Compact 540, Order No. 7719 

Cooling fan 



COMPACT CONTROL 44S, 


Receiver 

SMC16SCAN 35, Order No. 7053 

Servos 

Type Order No No. off 

DS 361 5159 4 

Gyro system 

G770T SRVS gyro system, 



LiPo 4/3400, Order No. 7648.4 or 

LiPo 4/3900, Order No. 7653.4 or 

LiPo 4/4800, Order No. 7658.4 

Programmer for COMPACT 

CONTROL speed controller 


Opto-coupler for Genius speed 

controller 


Receiver battery, 4N-1000 A 2/3 NiMH 


Switch harness with charge socket 



Min. mx-16s Order No. 4701, 

35 MHz band 

● Robust electric-powered model 

helicopter with generous excess of 

power 

● Suitable for beginners, advanced 

pilots and experts 

● Right-hand rotation main rotor 

● Auto-rotation freewheel as standard 

● Toothed belt tail rotor drive system 

● Suitable for use with four-cell LiPo 


● Ideal for the beginner to helicopter 

flying 


55 

Model aircraft

Upgrade components for the LOGO 10 Compact 

Carbon rotor blades 

Order No. 4493.201 

CFRP tail rotor upgrade 

Order No. 4493.229 

Aluminium hexagon insert 

Order No. 4493.212 


CFRP tail panels 

Order No. 4493.206 

Canopy 

Order No. 4493.203 

Aluminium motor plate 

Order No. 4493.213 

Hardened tail rotor shaft 

Order No. 4493.208 

Aluminium canopy fixing 

Order No. 4493.216

Aluminium swashplate 

Order No. 4493.217 

CFRP gyro plate 

Order No. 4493.320 

Ballraced mixer lever 

Order No. 4493.237 

Ballraced aluminium collective pitch compensator 

Order No. 4493.318 

Annular clamp, 10 mm 

Order No. 4493.225 

O-ring set, medium 

Order No. 4493.239 

Ballraced tail rotor bellcrank 

Order No. 4493.230 

O-ring set, hard 

Order No. 4493.339 

CFRP tail rotor servo mount 

Order No. 4493.220 

Tail rotor hub with thrust 

bearings (set) 

Order No. 4493.232 

Flybar paddle, light 

Order No. 4493.242 


57 

Model aircraft


AGUSTA MH-68A (A109 POWER) 

Order No. 4473 Fuselage kit for UNI-Mechanics 2000 

or elektro SKALAR mechanics, Rotor Ø 1550 mm 


● Semi-scale model of a US 

Coastguard helicopter 

● Suitable for glowplug motor or 

electric motor 

● White epoxy fuselage with 

machine-cut openings 

● Laser-cut wooden parts, ready to fit 

● Vacuum-moulded, smoked-tint 

glazing panels with concealed 

internal attachment 

● GRP horizontal stabiliser panels as 

standard 

● Kit includes decal sheet 

● Large removable side-doors provide 

convenient access to the mechanics 

at all times, and – in particular – 

good access for swapping the 

battery in the electric version. 

58 



Specification 






Model scale 1:7 

RC functions 

Roll 

Pitch-axis 

Yaw 


Throttle 

Gyro gain 

Retractable undercarriage

Motor 

to suit mechanics: 15 cc two-stroke 

glow-motor or brushless electric motor 


(see Mechanics) 

Gyro system 

e.g. G770T SRVS gyro system, 


Servos 

Type Order No. Function 

No. off 

C4421 3892 4/5 Swashplate, 

throttle 

DS 8900 G 5182 1 Tail rotor 

C4041 3916 3 Retract 

system 


accessories 

Retractable undercarriage 


Scale fittings set Order No. 1174 

For glow-powered version: 

UNI-Mechanics 2000 

Order No. 4448.LN 

OS MAX 91 RZ-HG Order No. 2711 

Hexagon starter cone 

Order No. 4448.103 

Hexagon starter adaptor 


(see Mechanics for additional accessories) 

For electric-powered version: 

elektro SKALAR mechanics 


COMPACT 655 20 V motor 


Motor fan Order No. 7722.1 

(see Mechanics for additional accessories) 


Min. mx-16s Order No. 4701, 

35 MHz band 

● VSemi-scale model helicopter 

based on a special version of the 

Agusta A109 POWER, operated 

by the US Coastguard Service 

under the registration "MH-68A". 

● Semi-scale mechanical tricycle 

retractable undercarriage. 

● Symmetrical three-point swashplate 

linkage (CCPM 120°) or four-point 

linkage. 

● Left-hand rotation main rotor 

● Auto-rotation freewheel 

● Driven tail rotor in auto-rotation 


59 

Model aircraft

RC hovercraft 

HOVER RESCUE CRAFT 


Hull length approx. 495 mm 

The illustrations show the model 

painted, with the supplied 

decals applied. The final 

production model may 

not look identical to 

the one in the pictures. 

60 



● Ready-made model (RTR) 

● Factory-assembled, ready to run 

● Three installed motors, RC system, 

transmitter, dry transmitter battery, 

rechargeable drive battery, 

drive battery charger 

● Decals applied 

● Small items

Specification 


Beam approx. 300 mm 

Overall height approx. 205 mm 


RC functions 

Right / left via drive motor 

Drive motors on / off 

Lift motor on / off 

● RTR (Ready To Run) 

● Loosely based on a Coast Guard 

hovercraft 

● Suitable for smooth floor surfaces 

and water 

● Vertical lift motor can be stopped 

using a press-button on the 

transmitter, e.g. for emergency 

braking manoeuvres 

● The supplied drive battery can be 

recharged in five hours using the 

charger included in the set. 

● This relatively large model can be 

operated in your own home without 

problem, as the styrofoam hull is 

not capable of damaging furniture. 


61 

Junior Line models

RC multi-function boat 

Graupner MULTIBOAT 






● Kit developed using a 3-D CAD 

system and the latest design 

methods 

● Ideal kit for the beginner to marine 

modelling 

● Vacuum-moulded ABS hull and 

deck, CNC-trimmed 

● All superstructure and deck 

components laser-cut from ABS 

● Kit includes fittings set, consisting of 

injection-moulded parts including 

mast, aerials, radar unit, lamps, 

typhoon, bollards, bow winch, liferaft 

and railing stanchions 

● Comprehensive decal set including 

stickers for the fire-fighting vessel 

and police boat. The modeller can 

finish off his boat in the scheme of 

his choice. 

● Set contents: vacuum-moulded ABS 

hull and deck components, laser-cut 

wooden internal bulkheads and 

boatstand, laser-cut ABS superstructure 

parts and small items, 

fittings set, motor mount, stern tube, 

shaft coupling, propeller, rudder 

system, rudder linkage components, 

wire for the railings, clear glazing 

material, small items. 

● The “fire monitor” auxiliary working 

system requires additional parts: 

see Accessories list. 

RC functions 

Rudder 

Forward / reverse speed, proportional 

Optional auxiliary functions 

Working fire monitor powered by 

water pump

Specification 




All-up weight approx. 1.9 kg 

(with working fire monitor) 

Scale approx. 1 : 25 



2129.2 Hull, CNC-trimmed 

.3 Deck, CNC-trimmed 

.4 Laser-cut ABS 

superstructure parts 

Rendered 3-D 

data of the boat design 



4729 X-408 40MHz RC set 

2875 NAVY V40R speed controller 

3323 SPEED 600 ECO 7.2 V 

2490.6 GM-Power-Pack drive battery, 

6N-3600 7.2 V / 3.6 Ah 

(two required) 

3061 G2 parallel cable 

3389 Copper flex cable 

3588 Suppressor capacitors 

2989 G2 connector system 

Accessories for the fire monitor 

auxiliary working system 


393 Fire extinguishing monitor 

7171 PICO 8 

914 Water pump 

2989 G2 connector system 

3068 G2 distributor cable 

● The Graupner MULTIBOAT is based 

on a French pilot boat. The dockyard 

uses this type as the basis for various 

other specialised vessels for the 

police, coastguard, lifeguard, fire 

service, customs and harbour sevices. 

● The design of the model makes it ideal 

as an easy start into boat modelling, 

as all the preparation for the potentially 

difficult stages is already completed. 

Nevertheless, the non-critical steps are 

left for the would-be model builder to 

carry out, thereby imparting the basic 

skills of marine modelling. 

● The hull and deck are machine-trimmed, 

thereby eliminating the tedious 

task of cutting out these parts. 

● All superstructure components are 

supplied as laser-cut ABS items which 

simply need to be slotted together and 

glued. Once again, no cutting is 

involved. 

● The model has to be painted, but 

again the modular construction makes 

this much simpler, as many parts are 

only assembled or attached to the 

boat when they have been painted. 

● The fittings are supplied as injectionmoulded 

components, and are simply 

glued in place. 

● The fire monitor auxiliary working 

system can be installed in the finished 

model at any time. The silicone hose 

and intake tube are included in the 

basic kit. 

The fire monitor and pump are easy 

to install subsequently. 

● The building instructions describe the 

installation of additional optional 

working systems in the form of a 

lighting system and rotating radar 

antenna. 

The additional accessories required 

for these systems are listed in the 

building instructions. 


63 

Boat models

RC straightway racing boat 

SX-4000 

Hans Lehner’s world record boat 

Order No. 2000, Overall length approx. 700 mm 

64 


Die Abbildungen zeigen das ausgebaute Modell 

Speed world record of 

156,26 km/hr 


● Ready-made model with carbon fibre hull 

● For single electric motor 

● For two-function radio control 

● With factory-fitted propeller shaft and 

stern tube, motor mount, shaft coupling, 

rudder and linkage, servo mount etc. 

Specification 




Empty weight approx. 450 g

Recommended accessories Servos 


Drive motor 

Order No. 

Lehner Type 1920 

6544 

Drive battery 

Order No. 

NiMH GP 6N-4600 

7.2 V/4.6 Ah 

98946.6 or 

LiPo 5000/2 

7.4 V/5.0 Ah 

7665.2 


Order No. 

GENIUS 100 

7167 

Propeller 

Order No. 

299.37-3 

or 

2299.39 

RC functions 

Rudder 

Proportional speed control 


C 351 5123 1 



40 MHz band 



2002.2 CFRP hull 

.3 GRP hatch covers 

.4 Propeller shaft and stern tube 

.5 Rudder 

2299.37-3 Propeller 

or 

2299.39 Propeller 

Hans Lehner recording a world record of 

156.26 km / hr in 2006 in the O-Hydro 

class (7 - 8 cells). 

● World record 2006 

at 149 km / hr, 

recorded at the 

Straightway Races 

in the USA in the N2 

Hydro class 

(max. 6 NiMH cells) 

● Straightway races are run over 

a 100 m course; the boat 

completes the course with a flying 

start in both directions, and the 

average speed is calculated. 

● The boat is designed for running in 

a straight line; the rudder is used 

primarily for course corrections. 


65 

Boat models

RC hydro racing boat 

SPACEBIRD 



66 New Items ’08


● Ready-made model (ARTR) 

● GRP hull 

● For single electric motor power 

system 

● With factory-fitted ballraced stern 

tube, rudder system, aluminium 

turn-fin, aluminium motor mount 

● Set contents: hull, hatch cover, 

floats, stern tube, rudder system, 

propeller, laser-cut parts for servo 

mount and boatstand, shaft 

coupling, water-cooling coil, decal 

sheet, rudder linkage components, 

small items 

Specification 





RC functions 

Rudder 

Proportional speed control, forward only 



4714 X-412 40 MHz FM RC set 

2847 POWER V60 speed controller 

3899 C 3041 ECO mini-servo 

for rudder 

97157 GM Pinnacle Diamant 

SP motor 

2490.7 GM Power Pack drive battery, 

7N-3600 Ni-MH 8.4 V / 3.6 Ah 

Please refer to the building instructions for additional 

accessories 



2017.2 Hull 

.3 Hatch cover 

.5 Rudder system 

.6 Turn-fin 

.7 Float set 

The illustrations show the model painted 

with the supplied decals applied 

● ARTR (Almost Ready To Run) 

● Suitable for the HYDRO 1 or 

HYDRO S7 racing class when fitted 

with a suitable power system 

(see also www.nauticus.info) 

● The carbon-look floats can be 

unscrewed for adjustment; 

the optimum angle relative to 

the hull can be set by fitting 

spacer washers 

● GRP hull supplied in white 

finish, in order to allow the 

modeller to apply the painted 

colour scheme of his choice 

● Additional upgrade power 

system variants will be published 

on the Graupner website when 

comprehensive tests have been 

completed 


67 

Boat models

RC day cruiser 

SILVER SPIRIT 







● Vacuum-moulded hull and deck, 

already joined 

● Incl. outboard motor with powerful 

SPEED 500 electric motor 

● Incl. receiver, rudder servo and 

throttle servo with mechanical motor 

switch, installed and ready to use 

● Set contents: joined hull and deck, 

cockpit cover, outboard motor with 

electric motor installed, boatstand 

with foam supports, decals applied, 

small items 

Specification 


Hull length, approx. 630 mm 



RC functions 

Rudder 

Forward running, on / off 



98900 Drive battery: GM Power 

Pack 6N-3600 

Ni-MH 7.2 V/3.6 Ah 

3426 AA-size dry cells for transmitter 

and receiver power 

supply 

(3 packs of 4 required) 

6407 MULTILADER 3 battery 

charger (for drive battery) 



2001.3 Hatch cover 

.5 Outboard motor with 


.6 Propeller 

● RTR (Ready-To-Run) 

● The full-size vessel is a day cruiser 

which is used for day-trips and 

weekend voyages. 

● For this reason the boats are 

typically operated in the 

Mediterranean and the Southern 

East and West coasts of the USA 

● The boat is ready for the water as 

soon as you have charged the drive 

battery and fitted the dry cells for 

the transmitter and receiver 

● The model is finished in silver, 

which shows off the attractive 

decals particularly well 

● The model can easily be upgraded 

by fitting an electronic speed 

controller (Order No. 7197); 

no soldering required 

● The electric motor is installed in the 

outboard housing at an angle, so 

that the deflection angle of the 

flexible drive shaft is as small as 

possible. This provides a significant 

improvement in the efficiency of the 

power system 


69 

Boat models

RC offshore racing boat 

WAVE EXPLORER 







● Vacuum-moulded hull and deck, 

already glued together 

● Powerful SPEED 600 geared electric 

motor with hydro drive system 

● Glass fibre reinforced plastic Hydro 

drive system 

● Stainless steel drive shaft and rudder 

shaft - no corrosion 

● Drive shaft and rudder shaft 

supported in stainless ballraces 

● Variable drive shaft angle for 

maximum possible speed 

● Water-cooled motor, rudder linkage 

sealed with rubber bellows 

● Receiver, rudder servo and throttle 

servo with mechanical motor switch 

factory-installed in waterproof 

RC box 

● Set contents: factory-joined hull and 

deck, cockpit cover, geared motor, 

propeller shaft and Hydro drive 

system, boatstand, 7.2 V 

rechargeable battery, plug-type 

battery charger, decals (already 

applied), small items 

Specification 


Hull length, approx. 840 mm 





3426 AA-size dry cells for transmitter 

and receiver 

(3 packs of 4 required) 



2016.3 Cockpit cover 

.5 Hydro drive unit 

.6 Propeller 

RC functions 

Rudder 

Forward running, 

on / off 

● RTR (Ready-To-Run) 

● The full-size vessels are 

offshore racing boats 

which are used for 

competition work all over 

the world 

● Annual race events are held 

for these vessels, especially 

in the Mediterranean, 

Australia, the West and East 

coasts of the USA and even in 

the Baltic 

● The model is ready for the 

water once you have charged 

the drive battery and fitted the 

dry cells for the transmitter and 

receiver 

● The model can easily be upgraded 

by fitting an electronic speed controller 

(Order No. 7197); 

no soldering required 


71 

Boat models

RC harbour tug 

NEW CASTLE 


Hull length 810 mm 





Graupner PREMIUM-Line 

● GRP hull 

● Superstructure assembled from 

laser-cut ABS parts 

● Detail fittings and small items made 

of metal and plastic 

● Finely detailed superstructure 

● Rubber tyre fenders 

● Hull and superstructure sprayfinished 

using semi-matt paints 

● Decals already applied 

● SPEED 600 class motor factoryinstalled 

● Simple installation of the RC 

components 

● Set contents: model, boatstand, 

small items 



4729 X-408 40MHz FM RC set 


769 Lead-acid drive battery, 

6 V / 4 Ah (two required) 

2989 G2 connector system for 

connecting the speed 

controller and battery 


3061 G2 parallel lead 


Order No. 2002.6 Boat propeller 

Specification 




Overall weight approx. 4.1 kg 


RC functions 

Rudder 

Forward / reverse running, 

proportional speed control 


● Non-scale model of a typical 

harbour tug, as commonly 

operated in large ports 

● High-quality ready-made model 


73 

Boat models

RC sea rescue cruiser 

THEODOR HEUSS 





1957- 2007 

50 years Theodor Heuss


75 

Boat models

RC sea rescue cruiser 

THEODOR HEUSS 





● GRP hulls for both models 


laser-cut ABS parts 

● Detail fittings and small parts made 

of metal or plastic 

● Finely detailed superstructure and 

details 

● Daughter boat included in the set 

● Daughter boat can be lowered to the 

water and then operated separately 

● Hull, superstructure and daughter 

boat, spray-finished with semi-matt 

paint 


● The cruiser is fitted with three 

factory-installed SPEED 600 class 

electric motors 

● The daughter boat is fitted with one 

factory-installed SPEED 280 class 


● Simple installation of the RC 

components in the cruiser 

● Installation of the RC components in 

the daughter boat is difficult due to 

the small size of the vessel, but is 

certainly possible 

● Set contents: sea rescue cruiser, 

daughter boat, boatstands, small 

items 

76 


Specification (cruiser) 






Specification (daughter boat) 






The illustration shows the prototype with optional accessories fitted. The final production model may not look identical to the one in the picture. 

RC functions (cruiser) 

Rudder 

Forward / reverse running, proportional 

speed control 

Open / close stern flap 

Lower daughter boat by opening the 

stern flap 

RC functions (daughter boat) 

Rudder 

Forward / reverse, proportional speed 

control

Recommended accessories (cruiser) 


4714 X-412 40MHz FM RC set 


(for central motor) 


(for side motors) 

3936.11 Servo Y-lead 

2581 Graupner 6N-8000 NiMH 

drive battery 


connecting speed controller 

to battery (two required) 

3068 G2 distributor lead 


(daughter boat) 


4054.10 R 600 FM 40 light 

micro-receiver 

5114.LOSE C 141 servo 

2836.BEC PURPLE SX3R speed 

controller 

7610.2 LiPo drive battery, 650 

7.4 V / 650 mAh 

3029.2 BEC motor power lead 

The daughter boat can be controlled 

using the cruiser’s transmitter, or by a 

separate X-408 40MHz FM RC set 

(Order No. 4729) 



Cruiser propeller set 


● Scale model of the first sea rescue 

cruiser featuring the current 

configuration (tower superstructure 

and separate daughter boat for 

shallow water operations). 

All subsequent cruisers have been 

built to the same layout. 

● A total of four ships of the Theodor 

Heuss class have been built. 

● On 12.02.1957 the cruiser was 

christened with the name of the 

German Federal President of the 

time, Theodor Heuss. 

● The daughter boat was christened 

Tedje, which is the North German 

diminutive of the first name 

Theodor. 

● The Theodor Heuss remained in 

service from 1957 to 1963 at 

Borkum, and from 1963 to 1985 

at Laboe. The cruiser was subsequently 

sold, and is still sailing 

today as a motor yacht under the 

name Frido Spatz. 

● The daughter boat has also been in 

private ownership since 1996, and 

is due to sail again after restoration. 

Previously it was set up as a 

display exhibit in front of the 

Norddeich rescue hangar. 

● The Theodor Heuss which is on 

display in the German Museum in 

Munich is the renamed sister ship 

H.H. Meier. 

● Top-quality model with superb 

detailing. 


77 

Boat models

RC armoured ship 

GRAF SPEE 






79 

Boat models

RC armoured ship 

GRAF SPEE 





● GRP hull 

● Laser-cut ABS superstructure 

components 

● Metal detail fittings and small items 

● Many finely detailed fittings 

● Ship’s aircraft painted in several 

colours 

● Hull, superstructure and cranes 

spray-finished using matt paints 

● Two SPEED 600-class electric 

motors, factory-installed 

● Straightforward RC component 

installation 

● Set contents: model, boat, 

small items 

80 


Specification 






The illustration shows the prototype with optional accessories fitted.



4729 X-408 FM ECO SPORT 

SYSTEM RC set, 40 MHz 


769 Lead-acid drive battery, 

6 V / 4 Ah (four required) 

3061 G2 parallel cable 


connecting speed controller 

and drive battery 


RC functions 

Rudder 

Forward / reverse running, 

proportional speed control 


Order No. 2003.6 Propeller set 

(pack of two) 

● ARTR (Almost-Ready-To-Run) 

● Scale model of the German Navy’s 

armoured ship, launched in 1934. 

● The armoured ships were designed and 

developed in accordance with the 

restrictions of the Treaty of Versailles, 

which denied Germany the right to 

build large combat ships over 10,000 

tons. These ships were fitted with 

powerful armaments for their size, and 

this gained them the rather mocking 

nickname of »pocket battleships« from 

the English. 

Nevertheless, they were successful 

designs within their limited scope. They 

were easily able to exploit their heavy 

weaponry to defeat smaller enemy 

ships, and yet escape from larger foes 

such as battleships thanks to their high 

speed of 28.5 kn. 

Their overall design also made the 

armoured ships ideal for the task of 

destroying enemy merchant shipping. 

● The Graf Spee was particularly 

renowned for its human treatment 

of prisoners: no crew members of 

captured ships were killed while the 

vessel was hunting for enemy 

freighters. Crews on board the Graf 

Spee were also handled fairly and well. 

● During her hunt for enemy freight 

vessels in the Atlantic – and also for a 

brief period in the Indian Ocean – the 

Graf Spee repeatedly used skillful 

tactics to escape from enemy warships. 

● The end came in the Battle of Rio de 

la Plata, in combat with three English 

cruisers. During this skirmish the Graf 

Spee was damaged, and steamed into 

the neutral port of Montevideo for 

repairs. In view of the English superiority, 

Captain Langsdorff subsequently 

took the decision to scupper the ship 

on 17 December 1939. 

● A superb, high-quality model featuring 

outstanding detail fittings. 


81 

Boat models

RC sail training ship 

ALEXANDER VON HUMBOLDT 




The illustration shows the prototype with optional accessories fitted. The final production model may not look identical to the one in the picture.


83 

Boat models

RC sail training ship 

ALEXANDER VON HUMBOLDT 





● GRP hull 


laser-cut ABS and wooden parts 

● Metal or plastic detail fittings and 

small parts 

● Finely detailed superstructure, 

railings and details 

● Completely factory-assembled rig 

● The model is supplied with all 

sails set (“under full sail”) 

● Green sails, as on the full-size 

vessel 

● Hull, superstructure and ship’s boat 

spray-finished in semi-matt paints 


● The model is factory-fitted with a 

SPEED 600 class electric motor 

● Relatively simple installation of the 

RC components in the model 

● Set contents: model, boatstand, 

small items 

84 


RC functions 

Rudder 

Forward / Reverse running 

Proportional speed control. 






All-up weight approx. 9 kg 


The illustration shows the prototype with optional accessories fitted. The final production model may not look identical to the one in the picture.


Order No. 2065.6 Boat propeller 



4714 X-412 40 MHz FM RC set 


2581 Graupner 6N-8000 NiMH 

drive battery 


connecting the speed 

controller and drive battery 


● Scale model of the barque 

Alexander von Humboldt operated 

by the German charity Sail Training 

of Bremerhaven 

(www.gruene-segel.de). 

● The model was developed 

according to original drawings in 

collaboration with the DSST. 

● The »Alex« was converted from a 

former fire ship of 1906. At that 

time fire ships were built with 

seaworthy sailing ship hulls. The 

central mast took the form of a 

lantern mast. More information on 

this subject can be found on the 

Internet. 

● To increase the vessel’s stability, 

the boat’s draft was increased 

slightly by enlarging the submerged 

part of the hull. As a result the 

model can be operated in flat-calm 

conditions even without a supplementary 

keel, provided that 

separate ballast weight is added to 

the hull. 

● Sailing the model in wind strengths 

above 1 Beaufort is not recommended! 

● Since the model is not fitted with a 

variable rig, it should be operated 

as a powered boat with sails. 

● The »Alex« has become an 

extremely familiar sight through its 

appearance in television advertisements 

for a world-renowned brand 

of beer. The hull was painted green 

in recognition of the sailing ships of 

the Rickmers shipping company. 

● Top-quality model with superb 

detailing. 


85 

Boat models

Mini RC motorcycle 

SUZUKI RM 250 




● Completely factory-assembled model 

with radio control system installed 

● 9 V transmitter battery, 

four AA-size 1.5 V dry cells 

● Completely painted, decals already 

applied 

● »GYRO« technology for straightforward 

handling 

● Front and rear wheel suspension 



As Order No. 4852 

but with rechargeable 6 V drive 

battery, 220 V plug-type battery 

charger, 9 V dry battery for transmitter, 

flexible driver figure. 


SUZUKI RM 250 



RC functions 

Forward / brake 

Right / left

Fully sprung mounted 

Fully sprung mounted 

For hard cross-country 

drive, the motorcycle 

is equipped with fully 

sprung front and rear 

wheel suspension. 

Specification 

Suzuki RM 250 Suzuki RM 250 

Order No. 4852 Order No. 4853 

Length approx. 225 mm 325 mm 

Width approx. 95 mm 155 mm 


Weight ready to run, approx. 415 g 935 g 

Speed 12 km/hr 15 km/hr 


● Mini RC motor cycle, 

easy to drive 

● »GYRO« technology for 

stabilising the motorcycle 

● Fully sprung front and 

rear wheel suspension 

● Capable of jumps and 

stunts 



87 

Junior Line models

Instructional kit 

HYDROCAR 



The Hydrocar is a futuristic instructional 

product which contains one of the 21 st 

Century’s most exciting technologies. 

The Hydrocar runs on 100% clean 

energy, generated by a reversible fuel 

cell which converts water into hydrogen 

with the help of solar energy. 

● Kit-form chassis with motor and 

LED lights 

● Reversible fuel cell, inner cylinders 

(2), outer cylinders (2) 

● Solar panel, battery pack, syringe, 

short and long rubber hoses 

● Operating instructions in German 

Specification 


Width approx. 130 mm 


Weight ready to run approx. 335 g 



The Hydrocar can exploit a small 

photo-voltaic cell for electrolysis, 

i.e. it uses renewable solar energy. 

Essential accessories 

Two AA-size dry cells (alkaline cells 

recommended) 

100 ml distilled water (distilled water is 

recommended for optimum operation) 

Scissors

Reversible fuel cells 

can be used for 

electrolysis. The 

electrolyte in a fuel 

cell is part of the 

structure of the 

membrane. Water is 

electrolysed when a 

voltage is applied to 

the fuel cell. By this 

process hydrogen is 

generated at the 

cathode side, and 

oxygen at the 

anode side. 

The Hydrocar kit is designed to be 

user-friendly. 

It places the latest developments from 

the laboratory directly in your hands. 

The Hydrocar exploits a reversible 

low-temperature Proton Exchange 

Membrane (PEM) fuel cell. 

This generates energy through the 

reaction between hydrogen, which 

is stored in the hydrogen cylinder, 

and oxygen, which is also stored on 

board. 

The Hydrocar automatically finds its 

way around the floor, independently 

circumventing obstacles. 

It runs forward and in reverse until 

it finds a route devoid of obstacles. 

When the Hydrocar is running 

on its own hydrogen, two blue 

LEDs light up on the top of 

the motor. 


89 

Car models

Carisma GT and Touring Car, 1 : 14 scale, 2-WD 

CARISMA 

M14 2WD 

The GRAUPNER Carisma series is 

setting new standards in the field of 

highly detailed RC model cars with fully 

proportional radio control. All models 

are produced under licence to the 

vehicle manufacturer, and thereby fulfil 

the highest licensing requirements of 

the corresponding car manufacturer. 

● Completely factory-assembled 2-WD 

chassis, with electric motor, receiver, 

forward / reverse / brake speed 

controller, servo 

● Two-channel proportional radio 

control system with plug-in crystals, 

drive battery, battery charger and 

eight dry cells for the transmitter 

● Sprung wheel suspension, bevel 

gear differential 

● Air-filled tyres, painted body shell 

with decals applied 

Specification, 1 : 14 scale GT and 

Touring Car models 




Wheelbase approx. 185 mm 

Weight ready-to-run 

approx. 680 g 


PORSCHE 997 GT3 Cup white, scale 1:14, 2-WD Order No. 90225 

MERCEDES DTM AMG, scale 1:14, 2-WD Order No. 90226 

MERCEDES DTM Original Parts, scale 1:14, 2-WD Order No. 90227 

RC functions 

Forward / reverse 

Throttle / brake 

Proportional steering, right / left 


Under Order No. 90200.XX in the 

Price List, or visit the Online-Shop 

HYPERLINK 


90227 

Complete range of 

replacement parts, 

accessories and upgrade 

components available 

Scale 1:14

90226 

2WD 

Included in the set 

90225 

Digital proportional 27 MHz 

radio control system 

Digital proportional 27 MHz 


● Scale model, similar detail to a 

die-cast model, combined with the 

performance of a high-quality RC 

model car; models are capable of up to 

30 km/hr. More than 40 km/hr is possible 

with upgrade components fitted 

● The 1 : 14 scale allows the cars to 

be run indoors at home or outdoors on 

asphalt surfaces 

● No additional accessories needed to 

operate the model: everything required 

is included in the set as standard 

● Replacement parts and a wide range 

of accessories and upgrade components 

are available 

● The body shells of the GT and 

Touring Car models can be interchanged; 

the wheelbase is variable 

to allow for this. 


91 

CAr models

Carisma GT and Touring Car, scale 1 : 14, 4-WD 

CARISMA 

GT14 series 4-WD 

The Carisma GT14 4-WD chassis is a 

completely new development, and 

offers high-quality materials combined 

with outstanding handling. All models 

are produced under licence to the 

vehicle manufacturer, and thereby fulfil 

the highest licensing requirements of 

the corresponding car manufacturer. 

● Completely factory-assembled 4-WD 

chassis, scale 1 : 14 

● 370-size electric motor 

● 27 MHz digital proportional radio 

control system with plug-in crystals, 

receiver / speed controller, servo 

● Independent suspension, four 

oil-filled shock absorbers 

● Two bevel gear differentials, slip 

coupling, ballraces 


PORSCHE 997 GT3 Cup white, 4-WD GT14 Order No. 90333 

VW GOLF GTI Cup version, 4-WD GT14 Order No. 90334 

FERRARI F430 GT2 Ecosse, 4-WD GT14 Order No. 90335 

● Profiled air-chamber tyres, painted 

body shell with decals applied 

● 7.2 V 1200 mAh NiMH drive battery 

and matching battery charger, plus 

eight dry cells for the transmitter, all 

included in the set 

● Many interesting upgrade components 

available 

Specification, GT14 models 





Weight ready-to-run approx. 800 g 

90333 

RC functions 

Forward / reverse / brake 

Steering, right / left 


No additional accessories are 

required to run the model. 

Replacement parts and 

upgrade parts 




Scale 1:14 

4-WD 

Complete range of 

replacement parts, 

accessories and upgrade 

components available 

90334

MERCEDES DTM AMG, 4WD GT14 Order No. 90336 

MERCEDES DTM Original Parts 4WD GT14 Order No. 90337 

90335 


90336 

90337 

● The Carisma GT14 chassis is as 

technically advanced as any 

1 : 10 competition touring car, 

but combined with the advantages 

of the smaller scale. The GT 14 

models are smaller, lighter, more 

agile and can be entered in competitions 

organised in smaller spaces. 

The use of GM-Racing brushless 

systems enables these cars to 

reach incredible speeds of up to 

80 km/hr. 

● All models are supplied completely 

factory-assembled. 

● The body shells are available 

individually and can be interchanged. 


93 

Car models

CARISMA GT14 PRO Touring Car, scale 1:14, 4-WD 

CARISMA GT14 Graphite PRO-series 4-WD 

Order No. 90350 CARISMA GT14 PRO 

Carbon fibre edition, excl. electronics 


Order No. 90350.ARTR 

The CARISMA GT14 PRO 4-WD chassis 

is a high-tech competition touring 

car to 1:14 scale. Completely equipped 

with almost all available upgrade 

components. 

● Completely factory-assembled 1:14 

scale 4-WD chassis with articulated 

drive 

● Carisma brushless motor (ARTR only) 

● Carisma brushless speed controller 

(ARTR only) 

● Independent suspension with four 

adjustable oil-filled shock absorbers 

● Two ball differentials, variable slip 

coupling 

● Completely ballraced 

● Four foam rubber tyres, supplied 

finish-sanded; optional profiled 

air-chamber tyres can be fitted 

● Crystal-clear Mazda 6 polycarbonate 

competition body shell 

● Suitable for six-cell and seven-cell 

1400 mAh NiMH drive batteries and 

LiPo batteries 

● Carbon fibre chassis and carbon 

fibre radio plate 

● Four CVD articulated shaft 

joints 

● Right/left threaded 

trackrods 


● Various toe-in and 

castor angles 

possible 

● Variable wheelbase 

Upgrade 

components 

Many interesting 

upgrade components 

available, e.g. 

front free-wheel 

bearings, various 

foam rubber tyres, 

painted polycarbonate 

body shells 

Scale 1:14 

The illustration shows the fully equipped prototype chassis with Genius 30 brushless speed controller. 

Order No. 90350.ARTR CARISMA GT14 PRO 

Carbon fibre edition, incl. brushless motor 

Top speed 80 km/hr

Carbon fibre 

radio plate 

CVD 

articulated 

shaft 

joints 

Right/left 

threaded 

trackrods 

Specification, 

GT 14 PRO models 





Weight ready-to-run approx. 850 g 

RC functions 

Forward/reverse/brake 

Steering, right/left 

Various 

toe-in and 

castor angles 

possible 

Recommended 

accessories for 90350 

Order No. 6541 BRUSHLESS INLINE 

380 electric motor 

Order No. 7161 GENIUS 30R Sport 


Carbon fibre 

chassis 

Genius 30 brushless 


Foam rubber tyres Battery holder 

Recommended accessories for 

90350 and 90350.ARTR 

Order No. 98868.6 Drive battery, 

7.2 V / 1400 mAh or LiPo battery 

Two-channel radio control system, 

mini-servo and suitable battery charger 

Replacement parts and upgrade 

parts 




Inline 380 

brushless motor 

Adjustable 

slip coupling 

Various toe-in 

and castor 

angles possible 

Ball 

differential 

Four 

adjustable 

oil-filled 

shock 

absorbers 

Independent suspension 

with double transverse 

arms 

The CARISMA GT14 PRO carbon fibre 

edition is a pure competition chassis, 

as technically refined as a high-class 

1:10 scale competition touring car, but 

to the smaller scale of 1:14. 

The GT 14 PRO models can be fitted 

with brushed or brushless power 

systems. The brushless version can 

achieve speeds up to and beyond 

80 km/hr, depending on fittings; for 

this reason the set includes the aerodynamically 

efficient Mazda 6 body 

shell. Special foam rubber tyres 

suitable for carpet or asphalt tracks 

are included, designed to provide 

high traction. Naturally, most other 

highly detailed DTM and Porsche 

body shells can also be fitted, 

as can Ferrari body shells from the 

CARISMA GT14 range. 


95 

Car models

RC Off-Road Truggy, scale 1:12, 4-WD 

HoBao Hyper 12 4-WD RTR Mini-Truggy 

Order No. 90048.RTR 

Scale 1:12 


The HoBao HYPER 12 4-WD RTR Mini- 

Truggy is an ideal beginner’s truggy for 

glow enthusiasts. Small, light, powerful, 

and complete with radio control 

system, 2.11 cc motor, two servos and 

accessories etc., up to 95% completely 

finished. 

● Factory-assembled ready-to-run 

4-WD chassis with four-wheel drive and 

three steel bevel gear differentials 

● High-quality two-channel 27 MHz 

rotary-knob RC system with steering / 

throttle servos and receiver already 

installed and connected. The steering 

and throttle linkages are factoryadjusted. 

● Reliable, high-performance HYPER 

12 motor of around 2.11 cc capacity, 

integral pull-cord starter system and 

tuned pipe silencer. 

● Four adjustable aluminium oil-filled 

shock absorbers, factory-filled. 

● Four CVD articulated joints for power 

transmission to all four wheels. 

● Polycarbonate body shell, pretrimmed 

and 

painted. 

96 

HoBao European 

Champion 2007 


Additional features 

● Three adjustable sealed differentials 

● Completely equipped with highquality 

ballraces 

● Ultra high-quality materials for 

durability and excellent fit 

● Genuine HoBao high-grip 

Mini-Truggy tyres 

● Three-jaw clutch 

● Front and rear disc brakes 

● Enclosed box for battery and receiver 

● Angled motor installation for low 

Centre of Gravity 

● Ultra-long transverse arms with 

comprehensive adjustment facilities 

and extra-long spring travels 

● Transverse stabiliser bars on front 

and rear axles 

● Robust aluminium chassis 

● Special competition fueltank 

● Robust aluminium shock absorber 

bridges 

RC functions 

Right / left 


The illustration shows the model in prototype form. 

The set includes the motor, RC system etc. as 

shown in the picture. 

Specification 




Weight ready-to-run 

approx. 1950 g 

Motor approx. 2.11 cc 

Wheelbase 243 mm

Right / left 

threaded 

trackrods 

Oil-filled shock 

absorbers 

with robust 

piston rods 

Transverse 

stabiliser bars 

on front and 

rear axles 

Robust CVD 

articulated joints 

front and rear (4) 

Low-set oval air filter 

for a lower-profile body 

shell and optimised 

aerodynamics 

Horizontally 

mounted 

steering 

servo 

Special 

competition 

fueltank 

Recommended accessories: 

Order No. 3426 1.5 V 

AA-size dry cell (12 required) 

or 

Order No. 3621 1.2 V 

AA-size rechargeable cell (12 required), 

plus suitable battery charger. 

Glowplug 

Order No. 1682 OS No. 8 

Fuel 

Order No. 2642.2L Titan Pro RS16, 

2.5 l canister 

Glowplug clip 


Hyper12 motor, 

capacity around 

2.11 cc, 

with integral 

pull-cord starter 

Enclosed battery / 

receiver box 

Robust 

aluminium 

chassis 

Tuned pipe 

silencer 

Centre differential 

with steel gear 

1:10 scale high-grip 

Truggy tyres 

Radio control 

system 


Front and 

rear chassis 

stiffeners 

Aerodynamic 

rear wing 

Optimum 

running gear 

geometry for maximum 

ground clearance 

and extremely long 

shock absorber / 

spring travels 





The HYPER12 RTR Mini-Truggy is 

the ideal first step into the world of 

glow-powered off-road models. 

Completely equipped as standard, 

the HYPER12 Mini-Truggy offers 

high-level pre-fabrication, very high 

speed and good quality and reliability. 

The smaller scale makes the model 

lighter, more agile and very simple to 

handle. The proven HYPER12 

2.11 cc motor provides an exciting 

performance and is very easy to 

set up, and is therefore an excellent 

choice for any beginner to the world 

of “nitro” models. 

HoBao 1:12 scale 

Mini-Truggy 


97 

Car models

RC Off-Road Buggy, 1:8 scale, 4-WD 

HoBao HYPER 8.5 RTR Racing Buggy 


Scale 1:8 


● The HYPER 8.5 RTR 4-WD Racing 

Buggy is based on the HYPER 8.5 

PRO used by the 2007 European 

Champion, and is supplied 95% 

factory-assembled 

● Factory-assembled, ready-to-run 

four-wheel drive chassis with three 

differentials 

● High-quality two-channel 27 MHz AM 

rotary-knob radio control system, 

with HYPER 8.5 steering / throttle 

servos and receiver installed and 

connected. The steering and 

throttle linkages are pre-adjusted. 

● Reliable, high-performance Hyper 

MAC 21 3P motor, capacity approx. 

3.5 cc, with pull-cord starter 

● Four adjustable oil-filled shock 

absorbers, pre-filled and installed 

● Fuel filler bottle and tool supplied 

● Pre-trimmed polycarbonate body 

shell, multi-colour painted 

● The comprehensive set contents 

enable the user to prepare the 

HYPER 8.5 RTR for racing in a very 

short time; the only accessories 

required are those listed below. 



● Twin disc brake, separately variable 

front and rear 

● Sealed box for battery and receiver 

● Wheels and tyres assembled and 

glued 

● Tuned pipe and exhaust manifold 

matched to the Hyper MAC 21 

3P motor 

● Robust articulated joints on the front 

axle 

● Fully ballraced 

● Adjustable Ackermann, variable toe-in 

and castor angle 

● Transverse stabiliser bars on front and 

rear axles 

● Carefully pre-adjusted and fine-tuned 

chassis with long spring travels and 

sophisticated suspension geometry 

● Extremely robust, torsionally rigid 

aluminium chassis 

European Champion 

2007 HYPER 8.5 

The illustration 

shows the model in its 

standard form; the set 

contains everything shown in the picture, including motor, RC system, etc. 

RC functions 

Right / left 


Specification 




Wheelbase 325 mm 

Weight ready to run, 


Motor 3.5 cc

Adjustable 

servo-saver 

Transverse 

stabiliser bars on 

front and rear axles 

Included 

in the set 

Right / left 

threaded 

steering trackrods 

Adjustable 

Ackermann 

Robust front 

articulated 

joints (2) 

Chassis 

stiffeners 

front 

Recommended 

accessories: 

 

Low-set oval air filter for 

lower-profile body 


aerodynamic 

efficiency 

Low-set 

steering servo 

Robust 

aluminium 

radio plate 

Performance-optimised 

tuned pipe silencer system 

Centre differential with 

steal gear 

Special competition fueltank 

with new-style side access for 

even faster pit-stops 

Order No. 3426 Dry cell, 1.5 V, 

AA-size (12 required) or 

Order No. 3621 AA-size 

rechargeable cell, 1.2 V 

(12 required) and suitable 

battery charger. 

Glowplug OS No. 8 


Fuel 

Order No. 2643.2L 

Titan Pro RS25, 2.5 l canister 

Glowplug energizer 




New combined sealed battery / 

receiver box with protected 

On / Off switch 

Chassis 

stiffeners 

rear 

Successful running gear geometry 

for maximum ground 

clearance and extremely long 

suspension / shock absorber 

travels 

Teflon-coated 

shock absorbers 

with tough piston 

rods and enlarged 

compensation 

volume behind the 

rubber membranes. 


Under Order No. 90045.XX and 

90047.XX in the Price List, or in the 

Online Shop www.graupner.de 

● The HYPER 8.5 RTR is based on 

the successful HYPER 8.5 PRO 

competition model car (Order No. 

90047). The robust, contest-proven 

running gear geometry and virtually 

all the dimensions are unchanged, 

and most of the replacement parts 

are compatible with each other, 

which means that it is possible to 

hone and fine-tune the HYPER 8.5 

RTR further, using upgrade and 

standard PRO-version components. 

● The high-performance HYPER 21 

motor (approx. 3.5 cc capacity) is 

capable of showing a clean pair of 

heels to most other competition 

models. In this respect the HYPER 

8.5 RTR sets new performance 

standards in the 1:8 scale Buggy 

class. 

● A highly refined »RTR« model, 

based on the 2007 European 

Champion car. 


99 

Car models

RC Off-Road Buggy, 1:8 scale, 4-WD 

HoBao HYPER 8.5 PRO 4WD Racing Buggy 


Scale 1:8 


The HoBao HYPER 8.5 PRO Racing 

Buggy is the reigning 2007 European 

Champion in the 1:8 off-road class. 

The car is supplied factory-assembled, 

without motor and without radio 

control system. 

● Factory-assembled 4-WD chassis 

with four-wheel drive and three differentials 

(steel bevel gear differentials) 

● HoBao high-grip Buggy tyres 


● Suitable for motors of 3.5 to 4.6 cc 

capacity 

● Four adjustable aluminium ultra 

large-volume oil-filled shock 

absorbers 


transmission to all four wheels 

● Clear polycarbonate body shell 

● Masterfix tuned pipe and manifold 


Champion 2007 


● Adjustable sealed Spider differentials 

● Fully equipped with high-quality 

ballraces 

● High-quality materials for durability 

and perfect fit 

● Many carbon fibre and aluminium 

upgrade components included as 

standard 

● Extended, stiffer aluminium FR2 

chassis 



● Sealed box for battery and receiver 

● Perfect motor position for agile 

handling and optimum jumping 


● Sophisticated axle geometry with 

wide-ranging adjustment 

facilities and extralong 

suspension 

travels 

● Transverse 

stabiliser 

bars on front 

and rear 

axles 

The illustration shows the model fitted out with optional items: 

motor, RC system and accessories (not included). 

● Lightweight clutch bells and wheel 

drivers 

● Special side-access competition 

fueltank for faster pit-stops 


bridges 

● Adjustable Ackermann 

Specification 






Motor 3.5 to 4.6 cc 

Wheelbase 320 - 326 mm 

RC functions 

Right / left 

Throttle / brake

Titanium right / left 

threaded trackrods 

Robust aluminium 

shock absorber bridges 

Transverse 

stabiliser bars 

on front and 

rear axles 

Robust articulated 

joints front and 

rear (4) 


Motor 

Order No. 92612 Dr. SPEED 21 

Nitro 3.5 cc motor 

Servo 

Order No. 5180 DS 8822 

(Two required) 

Glowplug 

Order No. 1575 OS P3 

Fuel 





Side-mounted 

low-profile steering servo 

Aluminium chassis 

stiffeners front 

Carbon fibre 

front plate 


for lower-profile 

body shell and 

optimised aerodynamic 

efficiency 

Carbon fibre 

radio plate 

Special 

competition 

fueltank 


Min. two-channel FM 

Sealed 

receiver box 

Robust FR2 

aluminium 

chassis 

Masterfix tuned pipe 

silencer 

Spider centre differential 

with lightweight steel gear 





Aluminium 

chassis 

stiffeners 

rear 

Teflon-coated ultra 

large-volume oil-filled 

shock absorbers with 

tough piston rods 

1:8 high-grip Buggy tyres 

Robust 

aluminium 

shock 

absorber 

bridges 

Optimum running gear geometry for 

maximum ground clearance and extremely 

long suspension / shock absorber travels 

● The HYPER 8.5 PRO displayed its 

full potential at the last European 

Championships in 2007, finishing 

well in front of the international 

competition, and achieving a 

well-earned European Champion 

2007 title in what is probably 

Europe’s most hard-fought 

competition class. The entire 

Graupner / GM-Racing Team has 

now also moved over to the HoBao 

HYPER 8.5 PRO, with its promise 

of success. 

● The team is led by many drivers 

of national and international repute, 

including Markus Feldmann, Timo 

Engelstätter, Söhnke Matz, Stefan 

Scheuenpflug and Maximilian 

Cordts - just a few to represent the 

whole team. 

● The HYPER 8.5 PRO is now a 

byword for quality, success and 

reliability – characteristics which 

have been proven in the unforgiving 

world of competition driving. 


101 

Car models

RC Off-Road Truggy, 1:8 scale, 4-WD 

HoBao HYPER ST 4WD RTR Racing Truggy 


Scale 1:8 


The HoBao HYPER ST 4WD RTR 

Racing Truggy is the perfect choice for 

the new Truggy racing class. It is also 

ideal for the beginner, since the HYPER 

ST is supplied 95% fully assembled, 

complete with radio control system, 

MAC 28 4.6 cc motor, two servos, 

accessories etc. 

● Factory-assembled 4-WD chassis, 

ready to run, with four-wheel drive 

and three differentials (steel bevel 

gear differentials) 


rotary-knob RC system, with 

steering/throttle servos and receiver 

factory-installed and connected. 

The steering and throttle linkages are 

pre-fitted and adjusted. 

● Powerful, reliable MAC 28 motor of 

around 4.6 cc capacity, with integral 

pull-cord starter system and tuned 

pipe silencer 

● Four adjustable aluminium ultra 

large-volume oil-filled shock 

absorbers, pre-filled 



● Polycarbonate body shell, already 

trimmed and painted 



● Three adjustable sealed differentials 


ballraces 

● Ultra high-quality materials for durability 


● Original HoBao high-grip Truggy tyres 

● New type of special three-shoe 

Truggy clutch 



● Sealed box for receiver 

● Perfect motor position for agile handling 

and optimum jumping characteristics 


wide-ranging adjustment facilities and 

extra-long suspension travels 




● Special competition fueltank, 

150 ml capacity 


Champion 2007 


bridges 

● Adjustable Ackermann 

Specification 





Weight ready to run, approx. 4300 g 

Motor for RTR approx. 4.6 cc 

RC functions 

Right / left 


The illustration shows the model in its standard form; the set contains 

everything shown in the picture, including motor, RC system, etc.

Optimum running 

gear geometry for 

maximum ground 

clearance and 

extremely long 

suspension / shock 

absorber travels 

Transverse stabiliser 

bars on front and 

rear axles 

Robust articulated 

joints front and 

rear (4) 

Included in 

the set 

Right / left threaded 

trackrods 

Low-set oval air filter for lowerprofile 

body shell and optimised 

Special competition fueltank, 


aerodynamic efficiency 

Chassis 


Robust 

aluminium 

chassis 

Side-mounted 

low-profile 

steering servo 

Tuned pipe 

silencer 


Order No. 3426 Dry cell, 

1.5 V, AA-size (12 required) 

or 

Order No. 3621 AA-size 

rechargeable cell, 1.2 V (12 required) 

and suitable battery charger. 

Glowplug 

Order No. 1682 OS No. 8 

Fuel 



Glowplug energize 


Battery holder 

MAC 28 motor, 

capacity 

approx. 4.6 cc, 

with integral 




Sealed receiver 

box 

1:8 Truggy 

high-grip tyres 


Supplied in the set 

Chassis 

stiffeners 

rear 

Aerodynamic 

rear wing 

Teflon-coated ultra 

large-volume 

oil-filled shock 

absorbers 

with tough 

piston rods 





The HYPER ST PRO Truggy is 

the perfect racing machine for all 

participants in Truggy competitions. 

Fully equipped as standard, the 

HYPER ST offers a level of performance 

which is seldom achieved 

even by PRO-standard models. 

European Champion technology, 

paired with the proven MAC 28 motor 

in conjunction with an ingenious 

chassis - all this offers unique driving 

performance in this price class. 


103 

Car models

RC Off-Road Truggy, 1:8 scale, 4-WD 

HoBao HYPER ST 4WD 

PRO Racing Truggy 

Order No. 90046 Scale 1:8 

104 


Champion 2007 



The HoBao HYPER ST 4WD PRO 

Racing Truggy is the first choice for the 

ambitious competition driver in the new 

truggy racing class. The vehicle is 

supplied in kit-form, i.e. unassembled, 

without motor and RC system. 

● 4-WD chassis kit, with four-wheel 

drive and three differentials 

(steel bevel gear differentials) 

● HoBao high-grip truggy tyres 

● Suitable for motors of 3.5 to 4.6 cc 

capacity 

● Four adjustable aluminium ultra largevolume 

oil-filled shock absorbers 

● Four articulated joints for power CVD 


● Clear polycarbonate body shell 

● Masterfix tuned pipe and manifold 


● Three adjustable sealed differentials, 

fully equipped with high-quality 

ballraces 

● Ultra high-quality materials for durability 


● Many carbon fibre and aluminium 

upgrade components included as 

standard 

● New type of special three-shoe 

Truggy clutch 



● Sealed box for battery 

and receiver 

Specification 






Motor 3.5 to 4.6 cc 


● Perfect motor position for agile 

handling and optimum jumping 



wide-ranging adjustment facilities 

and extra-long suspension travels 




● Special competition fueltank, 



bridges 

● Adjustable Ackermannn 

RC functions 

Right / left 


The illustration shows the model fitted out with motor, RC system and accessories (not included)

Teflon-coated 

ultra large-volume 


absorbers with tough 

piston rods 


shock absorber 

bridges 

Aluminium chassis 


Robust articulated joints 



Motor 

Order No. 92612 Dr. SPEED 28 Nitro 

4.8 cc motor 

Servo 

Order No. 5180 DS 8822 

(Two required) 

Glowplug 

Order No. 1575 OS P3 

Polished front plate 

Fuel 




for lower-profile body 


aerodynamic 

efficiency 

Horizontally 

mounted 

sleering servo 

Carbon fibre 

radio plate 

Special competitionfueltank, 

150 ml 

capacity 






Min. two-channel FM 

Aluminium 

chassis stiffeners 

rear 

Sealed 

receiver box 


Under Order No. 90046.XX 

and 90045.XX in the Price List, 

or in the Online Shop 


Robust 

aluminium 

chassis 

Masterfix 

tuned pipe 

silencer 



rear axles 

1:8 Truggy 

high-grip tyres 

Right / left threaded 

trackrods 


shock absorber 

bridges 

Optimum running gear 

geometry for maximum 


and extremely long 

suspension / shock 

absorber travels 

● The HYPER ST PRO Truggy is 

the perfect racing machine for all 

participants in Truggy competitions. 

● The car’s symbiosis of ultra highquality 

materials and sophisticated 

axle geometry provides an assured 

advantage over other drivers in 

hard competition conditions. 

● High performance and extreme 

reliability are your guarantee of 

success in the harsh world of 

off-road racing. 


105 

Car models

RC Electric Off-Road Truggy, scale 1:30 4-WD 

GM-Racing MICRO ST30 1/30 RTR 

Electric Truggy 4WD 

Order No. 90155.RTR Scale 1 : 30 



The GM-Racing MICRO ST30 1/30 

RTR electric 4-WD truggy is probably 

the first fully featured radio-controlled 

replica of a competition truggy model 

to the small scale of 1:30. The Micro 

ST30 is supplied 100% factoryassembled, 

and comes complete with 

all accessories required. 

● Ready-to-run 4-WD chassis, supplied 

completely assembled, with 

articulated drive shafts and two 

differentials 

● Electronic speed controller giving 

proportional control in forward and 

reverse running. 


rotary-knob RC system for plug-in 

crystals, with micro steering servo, 

speed controller and receiver already 

installed and connected. 

Various motor 

pinions/gearbox 

reduction ratios 

possible 

Micro 

electric 

motor 

The illustrations show the prototype model 

● Set includes Ni-MH drive battery and 

matching charger 

● High-performance electric motor 

● Four adjustable shock absorbers 

● Eight dry cells for the transmitter, 


● Factory-trimmed polycarbonate 

truggy body shell, painted, decals 

applied. 


● Independent suspension with double 

transverse arms on all four wheels 

● Available in various colours 

● Robust construction, easy to 

maintain 

● High-grip truggy wheels and tyres, 

bonded and installed 

● Countersunk chassis screws 

● Ballraced transmission 

● Four-wheel drive via central articulated 

shaft 

● Robust plastic chassis 

Central drive gear 

on the articulated 

shaft

Scale 1:30 

Drive shafts 

Double transverse arms for great ground 

clearance and long spring travels 

Specification 




Motor type Micro 

Wheel diameter 35 mm 



No accessories are required to run the 

model; the set includes everything. 



Robust plastic chassis 

Large rear 

wing 

Adjustable 

shock 

absorbers 

High-grip 

Truggy tyres 


Under Order No. 90155.RTR in the 



RC functions 

Right / left 

Forward / reverse 

● Beginner: 

The GM-Racing MICRO ST30 

1/30 RTR Electric 4-WD Truggy is 

the ideal indoor fun model for 

beginners. Completely equipped 

and fully assembled. All you have 

to do is fit the dry cells in the transmitter 

and give the drive battery a 

brief charge, and all the fun can be 

enjoyed right there in your living 

room or child’s bedroom. The plugin 

crystals on the 27 MHz band 

make it possible to hold exciting 

races with friends. Of course, the 

MICRO ST30 can also be run on 

suitable surfaces outdoors. 

● Advanced: 

A toy? Yes, that’s true, but it’s not 

only for the littl’uns: experienced 

modellers will also find much to 

enjoy with the GM-Racing Micro 

ST30 Truggy. Wheelies, jumps and 

exciting races - everything’s 

possible. And if you’re a very 

determined modeller, you may want 

to drive round the coffee cups on 

the office table during the coffee 

break, or even round the beer mugs 

in the local bar. The 4-WD transmission 

provides excellent handling, 

and is a unique feature of a 

unique micro-size model. 


107 

Car models

Mini RC Off-Road Brushless Buggy and Truggy, scale 1:16, 4-WD 

MINI ST16 BRUSHLESS 

TRUGGY 4WD RTR 

Order No. 90152.RTR, Scale 1:16 




The GM Racing MINI 4-WD electric 

Off-Road series is available in the form 

of the BUGGY B16 or TRUGGY ST16 

models. 

The RTR variants feature a high-performance 

brushless power system with 

LiPo batteries as standard, in addition 

to a high-quality radio control 

system. 

Order No. 90152 contains only the 

factory-assembled TRUGGY chassis, 

i.e. without the electronic components. 

All versions are supplied 95% 



with four-wheel drive and two bevel 

gear differentials 

● High-quality two-channel rotary knob 

RC system, with steering servo and 

receiver installed and connected. 

Steering linkages factory-adjusted. 

(RTR version only) 

● High-performance brushless power 

system with motor, speed controller, 

three-cell 11.1 V LiPo drive battery 

and matching charger (RTR version 

only) 

● Eight AA-size dry cells for the transmitter 



absorbers, factory-filled 

● Four drive shafts for power transmission 

to all four wheels 

● Pre-painted polycarbonate body shell 




ballraces 

● Truggy or Buggy tyres, according 

to model 

● Central articulated drive shaft with 

metal bevel drive gears 


transverse arms on front and rear 

axles 




● Robust plastic 

shock 

absorber 

bridges 

and 

transverse 

arms 

90152.RTR 

The illustrations show the prototype model in RTR form 

MINI ST16 TRUGGY 

Chassis 4WD without RC 

Order No. 90152, Scale 1:16 

Up to 65 km/hr 

top speed 

90153.RTR 

BRUSHLESS RTR

MINI B16 BRUSHLESS 

BUGGY 4WD RTR 


Independent 

suspension with 

double 

transverse arms on 

front and rear axles 


bars on front 


Plastic threaded 


absorbers 

Robust drive shafts 



Brushless speed controller BRUSHLESS motor 

On / Off 

switch 

Radio plate 

Battery 

retainer 

system 


chassis 

Specification, Buggy ST16/B16 

B16 ST16 




Weight ready to 

run, approx. 890 g 930 g 

Motor (RTR version) Brushless Brushless 


(RTR version) Brushless Brushless 

Wheelbase 175 mm 175 mm 

Ground clearance 15 mm 20 mm 

Buggy tyres 

Right / left 

threaded 

trackrods 

Aluminium 

motor mount 

Aerodynamic 

rear wing 

RC functions 

Right / left 

Throttle / brake / 

reverse 

Recommended 

accessories: 

Radio control 

system 

RTR version: 



Under Order No. 

90152.XX and 90153.XX 

in the Price List, or visit 

the Online-Shop 


Whichever variant you choose - 

Buggy or Truggy Brushless RTR - 

these two models are not for the 

faint-hearted. 

The three-cell LiPo battery provides 

breathtaking acceleration and top 

speeds beyond the 60 km/hr mark. 

If this is all too much for you, the 

power can be reduced by fitting a 

two-cell battery, or you can choose 

the pure chassis version, Order No. 

90152. In this case you can fit out 

your MINI ST16 to suit your personal 

taste and driving style. 

RTR version 

only 


109 

Car models

RC Electric Off-Road Truggy, scale 1:10, 4-WD 

BAJA 4WD Truggy 

1/10 RTR Electric Racing Truggy 



The BAJA Electric 4-WD Truggy is the 

ideal beginner’s model. 

The BAJA is supplied 95% factoryassembled, 

and can be ready for the 

road in just a few minutes. To run the 

model all you need is dry cells for the 

radio control system. 

● Factory-assembled Ready To Run 

4-WD chassis with four-wheel drive 

and two steel bevel gear 

differentials 

110 


● Electronic speed controller for 

proportional speed control in forward 

/ reverse 


rotary-knob RC system with steering 

servo, speed controller and receiver 

already installed and connected. 

● The steering linkage is factoryadjusted. 

● Set includes 7.2 V drive battery and 

matching charger 

● High-performance 540-size electric 

motor 

● Four adjustable shock absorbers 

● Telescopic articulated joints on all 

four wheels 

● Pre-trimmed BAJA polycarbonate 

body shell, painted, decals applied. 


● Variable castor on the front axle: 

+/- 2 degrees 

● Easily variable axle geometry: adjustable 

ball-end bolt axle mountings 

for variable tracking and camber 

● Robust construction, easy to 

maintain 

● Off-Road wheels and tyres, bonded 

and fitted 

● Countersunk chassis screws 


● Four-wheel drive via central 

articulated shaft 

● Robust 2.0 mm aluminium 

6061-T6 chassis 

The illustration shows the prototype model in RTR form. Standard equipment 

includes motor, drive battery, speed controller, RC system, battery charger, etc.

Radio plate 

Large 

front ram 

guard 

Double transverse 

arms for great 


and long 


Oversized 

high-grip Truggy tyres 

Specification 




Wheel Ø 106 mm 

Weight ready to run, approx.1800 g 

Gearbox reduction ratio 7.4 : 1 

Motor type RC540 

RC functions 

Right / left 

Forward / reverse / brake 

Steering 

servo 

On / Off 

switch 

Robust 

aluminium 

chassis 

Receiver 

holder 

7.2 V drive 

battery with 

quick-release 

retainer system 



1.5 V AA-size dry cell 

(eight required) 

or 

Order No. 3621 1.2V AA-size 

rechargeable cell (eight required), 

and matching charger. 



Various motor pinions / 

gearbox reduction ratios possible 

Adjustable shock 

absorbers 

RC540 


Electronic speed 

controller, 

forward / brake / 

reverse 

Central 

drive gear 

on the 




90160.XX in the Price List, or visit the 

Online-Shop www.graupner.de 

The BAJA Electric 4-WD Truggy is 

the ideal beginner’s model. 

Extremely highly pre-fabricated and 

ultra-complete, the model represents 

an instant method of making a start in 

the fascinating world of RC model 

cars. Charge up the batteries, fit the 

dry cells in the transmitter, and away 

you go. The plug-in crystals on the 

27 MHz band enable you to hold 

exciting races with friends. 

The ambitious modeller will also find 

much to enjoy with the BAJA Electric 

4-WD Truggy. 

With the permanent four-wheel drive 

and the huge tyres it masters nearly 

every territory. Even the new Genius 

BRUSHLESS motors can be applied 

as motorisation. 


111 

Car models

Mini RC Off-Road Nitro-Truggy, scale 1:16, 4-WD 

MINI ST16 NITRO TRUGGY 

4WD RTR Order No. 90154.RTR 


The GM Racing MINI ST16 NITRO 

TRUGGY 4-WD RTR is a miniature 

“nitro” Truggy with many outstanding 

features. Small, light, strong, 

and complete with a high-quality radio 

control system, glowplug motor, two 

servos and accessories, supplied 95% 



with four-wheel drive and two bevel 

gear differentials 

● High-quality two-channel rotary-knob 

RC system with steering / throttle 

servos and receiver installed and 

connected. 

The steering and throttle linkages are 

already adjusted. 

● Reliable, high-performance Racing 

Nitro Bull motor of around 1.10 cc 

capacity, integral pull-cord starter 

system and tuned pipe silencer 


absorbers, factory-filled 

● Four drive shafts for power transmission 

to all four wheels 

● Painted polycarbonate body shell 

112 



● Two bevel gear differentials 


ballraces 

● Superb quality materials for durability 

and excellent fit of parts 

● Truggy tyres on five-spoke wheels 

● Centrifugal clutch 

● Central disc brake acting upon all 

four wheels 

● Enclosed box for battery and receiver 


transverse arms on front and rear 

axles 




● Special fueltank, 38 cc capacity 

● Robust plastic shock absorber 

bridges and transverse arms 

The illustration shows the 

prototype model. The motor, 

RC system etc. are supplied in the set, 

but not the red aluminium parts or the 

aluminium shock absorber bridges.Two speed 

gearbox 

Specification 






Motor (RTR version) 

approx. 1.1 cc 


Ground clearance 19 mm 

RC functions 

Right / left 

Throttle / brake

Robust drive 

shafts, front 

and rear (4) 

Plastic 

threaded oil-filled 

shock absorbers 

(Alu version optional) 



rear axles 

Threaded 

trackrod 

Right/Left 


Order No. 3426 1.5 V AA-size dry cell 

(eight required for transmitter) plus four 

AAA-size dry cells 

or 

Order No. 3621 1.2 V AA-size 

rechargeable cells (eight required) 

and four AAA-size cells, 

Order No. 98853 and a matching 

charger. 

Micro Failsafe module 


Steering servo 

Two-speed 

gearbox (optional) 

Tuned pipe 

silencer 

Fuel 

Order No. 2642.2L Titan Pro RS16 


Glowplug clip 


Nitro Bull Motor 

of around 1.10 cc 

capacity, integral 


Air filter 

Special 

fueltank, 

38 cc 

capacity 

Robust 

aluminium 

chassis 



Throttle/ 

brake 

servo 

Enclosed box 

for battery and 

receiver 



90154.XX in the Price List, or visit 

the Online-Shop www.graupner.de 

Truggy 

tyres 

Aerodynamic 

rear wing 

Independent 

suspension 

with double 

tranverse arms 

on front and 

rear axles 

On the one hand the MINI ST16 

NITRO TRUGGY 4-WD RTR is a 

low-cost entry-level model, showing 

the way into the world of glowpowered 

(“nitro”) RC model cars; 

on the other it is an ideal fun model 

for the more ambitious modeller. 

Equipped with an optional two-speed 

gearbox the model is capable of an 

unbelievable performance for its size, 

and does call for a certain amount 

of prior experience. 


113 

Car models

RC Off-Road Monster Truck MT8 Nitro, scale 1:8, 4-WD 

Monstertruck MT8 

NITRO 4WD RTR M1/8 


Best.-Nr. 90161.RTR 

The GM Racing MT8 NITRO 4-WD RTR 

Monster Truck is supplied 95% factoryassembled, 

and can be ready for the 

track in just a few minutes. To complete 

the set all you need are fuel, the Nitro 

starter set and batteries (dry or rechargeable) 

for the radio control system. 

● Completely factory-assembled Ready 

To Run 4-WD chassis with two steel 

bevel gear differentials 


rotary-knob RC system with steering/ 



and throttle linkages are already 

adjusted. 

● Powerful, reliable 18CXP motor of 

approx. 3.0 cc capacity with integral 



shock absorbers, already filled and 

fitted 

● Two-speed automatic gearbox 

● Pre-painted polycarbonate body 

shell. 

Specification 











● Disc brake acting upon all four 

wheels 

● Enclosed, splashproof RC box for 

battery and receiver 

● Large Monster Truck wheels and 

tyres, bonded and installed 

● Tuned pipe silencer for enhanced 

power 

● Fueltank capacity 130 cc 


● Chain drive from two-speed gearbox 

to centre axle 

RC functions 

Right / left 


The illustration shows the model in its standard form, with motor, RC system, etc.

Included in 

the set 

Front ram 

guard 

Enclosed 

battery / receiver 

box 

Shock 

absorber 

pushrods 

Oversized high-grip 

Monster Truck tyres 



(twelve required) 

or 


rechargeable cell (twelve required) 

plus matching charger 

Micro Fail Safe module 


Nitro Starter set 



servo 

Tuned pipe 

silencer 

On / Off 

switch 

Fuel 

Order No. 2643.2L 

Titan Pro RS25 






in the Price List, or visit the 

Online-Shop 


Air filter 

Adjustable 

aluminium 


absorbers 

Two-speed 

gearbox 

18CXP 3.0 cc 

motor 

Pull-cord starter 

130 cc fueltank 

Body shell 

mountings 

Swinging axle 

with differential 

The MT8 NITRO Monster Truck 4-WD 

is not a competition vehicle; it is 

designed purely for fun. Its size and 

construction also make it suitable 

for the less experienced modeller. 

The integral two-speed automatic 

gearbox in conjunction with the 

powerful 3.0 cc glow motor ensures 

high performance on the track. 

The model is sprung by means of 

fore-and-aft links in conjunction 

with two swinging axles. The shock 

absorber linkage exploits pushrods, 

as used on the large monster trucks 

from the USA. This distinctive feature 

clearly marks out the MT8 from 

the mass of off-road models. 


115 

Car models

RC Off-Road Truggy, scale 1:8, 4-WD 

GM Fun-Truggy Leopard 4WD 

1/8 RTR Racing 




The GM Fun-Truggy LEOPARD 1/8 

4-WD is a low-cost first model for 

making a start in the world of 1:8 scale 

Truggies. 

It is supplied 95% factory-built, and can 

be ready for the track in just a few 

minutes. All you need to complete the 

set are fuel, rechargeable batteries and 

the Nitro Starter Set. 

There are two versions: one the 

90505.RTR variant described here, the 

other the 90505 version without motor, 

radio control system and servos, i.e. 

just the factory-assembled chassis and 

pre-painted body shell. 


4-WD Truggy chassis with four-wheel 

drive and three steel bevel gear 

differentials 

● Three differentials (front, rear and 

centre) 

● High-quality two-channel 

27 MHz AM rotary-knob RC 

system with steering / throttle servos 

and receiver already installed and 

connected. Steering and throttle 

linkages pre-adjusted (RTR version 

only) 

● Powerful, reliable GM Nitro Bull 28 

motor of around 4.6 cc capacity and 

integral pull-cord starter (RTR version 

only) 



shock absorbers, pre-filled 

● Steel power transmission joints at the 

rear, articulated CVD joints at the front 


shell, factory-painted. 


● Powerful double disc brake acting 

upon all four wheels, separately 

adjustable for front / rear axles 

● Enclosed, splashproof RC box for 

rechargeable battery and receiver 

● Large Truggy wheels and tyres, 

bonded and fitted 

● Aluminium tuned pipe silencer for 

enhanced power 



● Four-wheel drive via central articulated 

shaft with centre differential 

● Torsionally stiff 3.0 mm 

aluminium 

6061-T6 

chassis 

● Power steering servo with 7.2 kg 

output torque (RTR version only) 

● Comprehensive adjustment 

facilities for tracking and 

camber, various shock 

absorber positions for the 

optimum set-up. 

Specification 









The illustration shows the prototype RTR model with motor, RC system, etc. 

RC functions 

Right / left 

Throttle / brake

GM Fun-Truggy Leopard 4WD 

1/8 ARTR Racing 


Adjustable aluminium 


absorbers 

Chassis 

stiffeners 

front 

Blue eloxided 

aluminium 

components 

Recommended 

accessories for 90505.RTR 


(twelve required) 

or 


rechargeable cell (twelve required) 

plus matching charger. 

Nitro Starter set Order No. 90504 

Fuel 



AMB transponder mount 


servo (RTR 

version only) 

Throttle / 

brake linkage 

Low-set 

steering 

servo (RTR 

version only) 

125 cc 

fueltank 

Carbon-look 

aluminium radio 

plate 

Oval air filter 

Central double 

disc brake 


90505 

For the ARTR Version 90505 the following 

items are also required: two-channel 

radio control system with two servos, 

glowplug motor (Dr. SPEED 28 

4.6 cc, Order No. 92613). 


Included in the 90505.RTR 

set. Two-channel set for 

90505. 

eplacement parts 


in the Price List, or visit 

the Online-Shop 


Enclosed box for rechargeable 

battery and 

receiver 

Aluminium 

tuned pipe 

silencer 

Integral centre 

differential with steel 

main gear 

On / Off switch 



Truggy tyres 

Chassis 

stiffeners 

rear 

GM NITRO BULL 

4.6 cc motor 

Pull-cord 

starter 

Red double transverse 

arms for great ground 

clearance and long 


● The RTR version of the GM Fun- 

Truggy Leopard 4-WD 1/8 is the 

ideal entry-level vehicle for making 

a start in “nitro” (glow-power) 

model racing. The extremely 

comprehensive fittings and high 

level of pre-fabrication enable the 

user to prepare the Leopard 

TRUGGY ready for the track in just 

a few minutes. 

● The more ambitious modeller may 

prefer the ARTR version, Order No. 

90505, so that he can select his 

own radio control system and 

power system components, and 

assemble the model to his own 

taste. 

● However, if you are a beginner we 

strongly recommend the very 

comprehensively equipped, factoryprepared 

RTR version. 

● Both variants are available at 

extremely reasonable prices, and 

offer a successful symbiosis of 

»Just For Fun« driving in the 

nearest gravel quarry, plus the 

chance to sniff the competition air 

at a racing event. 

● In spite of the very reasonable price 

the model features very high potential 

performance. The reliable 4.6 cc 

GM NITRO BULL motor, in combination 

with the sophisticated and 

well-matched running gear, ensure 

outstanding performance on the 

track. 

● Guaranteed fun factor. 


117 

Car models

RC Off-Road Monster Truck, scale 1:6, 2-WD 

GM Racing MT6 Fuel 

2WD Monstertruck RTR 



The GM-Racing MT6 Fuel Monster 

Truck to 1:6 scale is a reasonably priced 

entry-level vehicle for making a start in 

the world of Monster Trucks powered 

by 23 cc petrol engines. 

It is supplied 95% factory-built, and can 

be ready for the track in just a few 

minutes. To complete the set all you 

require are petrol, a rechargeable 

receiver battery and a Fail Safe module 

– an absolutely essential accessory. 

Models of this size must not be run 

under any circumstances without this 

safety system! 


2-WD Monster Truck chassis with 

one steel bevel gear differential 





and throttle linkages are factoryadjusted. 

● Powerful, reliable 

23 cc petrol engine 

with integral pullcord 

starter 

118 



shock absorbers with knurled nuts, 

pre-filled 

● Steel power transmission joints 




● Aluminium tuned pipe silencer for 

enhanced power, available as an 

upgrade component 



● Powerful adjustable double disc brake 

● Enclosed, splashproof RC box 

for rechargeable 

battery and 

receiver 

● Large Monster Truck wheels and 

tyres, bonded and fitted 

● Rear-wheel drive via central 


● Torsionally rigid 4.0 mm aluminium 

6060-T6 chassis 

The illustration shows the RTR model 

● Powerful steering servo with 22 kg 

output torque 

● Comprehensive adjustment facilities 

for tracking, camber, various shock 

absorber positions for the optimum 

set-up. 

● Variable castor angle, 0° / 6° 

RC functions 

Right / left 

Throttle / brake

Body shell 

mountings 

Blue eloxided 

aluminium 

components 

Right / left 

threaded 

trackrods 

Throttle / brake servo 

with 4 kg output torque 

Specification 




Weight ready to run, approx. 14 kg 

Petrol engine, approx. 23 cc 



Gearbox reduction ratio 11.3 : 1 

Polycarbonate 

lateral mud 

deflectors 

Aluminium 

roll-over bar 

Air filter 


90162.RTR 


rechargeable cell (eight required for 

transmitter), plus matching charger. 

Fuel 

Standard two-stroke mixture from any 

petrol station 

Micro Fail Safe module 



3+2 N_1400 2/3 A NiMH 

Order No. 2493.5H 

On / Off 

switch 

Enclosed box for 

rechargeable 

battery and receiver 

Steering servo with 

22 kg output torque 

Reliable 23 cc 

petrol engine 

Pull-cord 

starter 

700 cc 

fueltank 


Monster Truck tyres 


Included in the set. 

Adjustable 

aluminium oilfilled 

shock 

absorbers 

Red double 

transverse arms 

for great ground 

clearance and 

long spring 

travels 

Variable rear 

axle toe-in 





The GM-Racing MT6 Monster Truck is 

not a toy! 

This model vehicle’s impressive size 

and weight alone make it a true eyecatcher. 

Handling this model does call 

for a certain level of care and modelling 

knowledge. 

For safety reasons we recommend 

that this vehicle never be operated in 

a residential area; please seek out a 

vacant, uninhabited piece of land. 

Always ensure that there are no other 

persons standing in the immediate 

vicinity of your model car. 

Provided that you observe these precautions, 

you will be able to enjoy the 

power and off-road capability of the 

MT6 to the full, as it only exhibits its 

full potential performance over crosscountry 

terrain and on slippery surfaces. 

Sheer, unadulterated performance 

and fun! 


119 

Car models

RC On-Road Nitro Touring Car, scale 1:10, 4-WD 

GM TC10 Nitro RTR touring car 

4WD 1/10 




The first “nitro” (glow-powered) on-road 

1:10 scale model car from the GM- 

Racing stable, designed by ex-European 

1:10 Nitro Champion C. Pietsch. 

This exclusive competition model car 

for 1:10 scale events is based on more 

than twenty years of racing experience, 

although the model does also take the 

needs of the ambitious weekend driver 

into account. For this circle of customers 

the RTR version, Order No. 

90151.RTR, combines a pro-standard 

competition model with an RTR specification; 

the model is supplied 95% factory-assembled, 

complete with radio 

control system and motor. 

● Factory-assembled 4-WD touring 

car chassis with four-wheel 

drive and two steel 

bevel gear 

differentials 

120 


● Four-wheel drive system using 

three belts 





and throttle linkages are factoryadjusted 

(RTR version only). 

● Powerful, reliable GM Nitro Bull 15 

motor of around 2.5 cc capacity with 

integral pull-cord starter (RTR version 

only) 

● Four adjustable aluminium 


absorbers 

● Steel power transmission joints at the 

rear, CVD articulated joints at the 

front 




● The PRO variant incorporates many 

top-quality aluminium and carbon fibre 

parts which are of high-strength plastic 

construction in the RTR version 

The illustration shows the prototype PRO model with Nitro Bull motor and accessories 

● Special flex-chassis with claw coupling 

/ spring effect 

● Powerful disc brake 

● Two-speed automatic gearbox 

● Profiled air-chamber tyres 

(RTR version only), bonded and fitted 

● Tuned pipe silencer for enhanced 

power 

● Special competition fueltank, 75 cc 

capacity 


● Integral belt tensioner with eccentric 

● Torsionally rigid aluminium chassis 

● Carbon fibre radio plate and 

stiffeners (PRO version only) 

● Comprehensive adjustment facilities 

for tracking, camber, castor; various 

shock absorber positions for the 

optimum set-up. 

RC functions 

Right / left 

Throttle / brake

GM TC10 Nitro PRO touring car 

4WD 1/10 


Right / left 

threaded 

trackrods 

Front 

knife 

stabiliser 

Double 

transverse arms 

with ball-end bolt 

mountings 

Aluminium differential 

bearer 

(PRO version only) 

Carbon fibre 

radio plate 


Specification 


Width, RTR approx. 190 mm 

Width, PRO approx. 200 mm 


Weight ready to run, approx. 1700 g 

Motor, RTR approx. 2.5 cc 

Motor, PRO approx. 2.1 cc 




for 90151.RTR 


rechargeable cell (twelve required), 

plus matching charger. 

Low-Set 

steering 

servo 

(RTR 

Version 

only) 

Throttle / 

brake 

linkage 

Aluminium 

tuned pipe 

silencer 

Nitro Starter set 


Throttle / 

brake servo 

(RTR version 

only) 

Claw 

coupling 

with 

spring 

75 cc 

special 

fueltank 

Fuel 




for 90151 

For the PRO Version 90151 the 

following items are also required: 

radio control system with at least 

two channels, two servos, motor 

(OS MAX 12 TZ, Order No. 2725). 

Centax 

two-speed 

clutch 

Transverse 

stabiliser bar 

OS-MAX 12 TZ motor 

2.11 cc capacity 


Two-speed automatic 

gearbox 



in the Price List, or visit the 

Online-Shop 


Central 

disc 

brake 

Aluminium 

differential 

bearer (PRO 

version only) 

Adjustable 

aluminium 

oil-filled 

shock 

absorbers 

Foam rubber tyres 


● GM-Racing TC10 NITRO 

PRO 4-WD 

The first test-runs showed the 

potential of the new GM-Racing 

TC10 Nitro PRO: Felix Bischoff 

immediately improved on the lap 

record at the permanent Rosenheim 

track by a margin of about 0.5 

seconds. He outclassed the entire 

field with superb support from the 

pit crew and chief developer 

Christoph Pietsch. 

● GM-Racing TC10 NITRO RTR 

4-WD 

The RTR version is based completely 

on the PRO chassis, the only 

changes being in the material 

selection: some parts are made of 

robust plastic instead of aluminium 

and carbon fibre. Of course, all the 

PRO parts can be retro-fitted as 

upgrades. The width of only 

190 mm means that the RTR 

variant can be used with all 

190 mm body shells made by 

various manufacturers, as well as 

200 mm competition body shells. 

These include the beautifully 

detailed CARISMA body shells. 

RTR 

PRO 

900271.64 

900271.65 


121 

Car models

Accessories for cars 

GM-Racing NITRO BULL motors 

In future, GM Racing NITRO BULL 

glowplug motors will be fitted as 

standard in most Graupner and GM- 

Racing RTR RC model cars. The focus 

of these very reasonably priced and 

reliable power plants is ultra-simple 

handling, and even complete beginners 

encounter virtually no problems in setting 

them up. Ultra-simple set-up and 

reliable running characteristics were our 

highest possible priority at the development 

stage of these motors, but no 

compromises were allowed in the 

mechanical design, and all motors are 

supplied with an integral pull-cord 

starter as standard. 

As an option, the .21 and .28 versions 

can also be fitted with a Rotostart 

system. All the motors function 

superbly with standard OS glowplugs. 

Caution: don’t use turbo-plugs! 

We recommend the OS8 glowplug. 

92600 


NITRO BULL 07 



Side-exhaust motor with pull-cord starter 

and twin-needle slide carburettor. 

The Nitro Bull 07 fits all current RC 

model cars built to the scales of 1:18 to 

1:12 which are designed for sideexhaust 

motors. 

92602 

NITRO BULL 15 



Rear-exhaust motor with pull-cord starter 


The NITRO BULL 15 fits all current RC 

model cars built to the scales of 1:10 

to 1:12 which are designed for rearexhaust 

motors. 

The illustration shows a 

motor, 3.5 cc capacity, 

retrofitted with a Rotostart 

system. 

92604 

NITRO BULL 21 





The NITRO BULL 21 fits all current 

buggies and truggies built to 1:8 scale 

which are designed for rear-exhaust 

motors. 

NITRO BULL 28 





The NITRO BULL 28 fits all current 

buggies and truggies built to 1: 8 scale 

which are designed for rear-exhaust 

motors. 

92605

GM-Racing DR. SPEED NITRO motors 

In future, GM-Racing DR. SPEED 

glowplug motors will be fitted to GM- 

Racing 1:8 scale competition models. 

Outstanding power output, 

ideal speed range combined with 

simple set-up characteristics - that was 

the spec. sheet for our development 

department. The result is the DR. 

SPEED NITRO motor with turbo 

combustion chamber insert and 3.5 / 

4.6 cc capacity, for the popular 1:8 

scale model buggies and truggies. 

The convincing price : performance 

ratio will make the DR. SPEED NITRO 

21 and 28 the stars of the racetracks. 

There are two variants of each motor: 

1. the Racer version with closed crankcase 

for use with pit-boxes, and 

2. the version with pull-cord starter, 

which can also be equipped with an 

optional Rotostart system. All variants 

are designed exclusively for use with 

what are known as turbo glowplugs. 

We recommend the OS P3 turbo plug, 

Order No. 1575. 

92610 

DR. SPEED 21 Nitro 



Rear-exhaust motor with turbo combustion 

chamber insert and three-needle 

slide carburettor. 

The DR. SPEED 21 fits all current 1:8 

scale buggies and truggies which are 

designed for rear-exhaust motors. 

For turbo-glowplugs 

92611 




Rear-exhaust motor with pull-cord starter, 

turbo combustion chamber insert 

and three-needle slide carburettor. 




92612 




Rear-exhaust motor with turbo combustion 

chamber insert and three-needle 

slide carburettor. 




DR. SPEED 28 NITRO 



Rear-exhaust motor with pull-cord starter, 

turbo combustion chamber insert 

and three-needle slide carburettor. 




92613 


123 

Car models

Car Accessories 

Pit-Boxes Rotostarter and accessories 

The new range of GM-Racing 

pit-boxes for all scales from 

1 : 18 to 1 : 8. 

All pit-boxes are supplied without 

rechargeable batteries, and are 

designed for use with standard 

6-cell 7.2 V battery sticks with JST 

connectors. Lead-acid batteries 

can also be fitted. 

1 : 8 Pit-Box, Off-Road High Power, 

2 x 775-size motor 


Extremely powerful, for large buggy / truggy 

/ monster truck motors. 

Easily starts .21, .28 and .30 motors even 

when they are very hard to turn over. 

Pit-Box, 1 : 18 – 1 : 10 On-Road, 

small, 1 x 550 motor 


Handy, ultra-compact pit-box for small 

on-road model cars 


Universal Pit-Box, 1 : 8 to 1 : 10 


Standard pit-box in cool carbon-look finish 

with one electric motor. 

Universal Pit-Box, On-Road and 

Off-Road, 2 x 550 motor 


Suitable for all current 1 : 8 and 1 : 10 scale 

buggies and track racing cars. 

Pit-Box, 1 : 18 – 1 : 12 Off-Road, 

very small, 1 x 550 motor 


Very small pit-box 

for Mini Off-Road car models 

These practical Rotostart conversion 

sets can be used to convert many 

motors fitted with pull-cord starters to 

the Rotostart system, finally consigning 

bloody fingers and blisters to the past. 

Why not convert to Rotostart? It could 

hardly be easier and more convenient. 

Rotostart conversion sets are simply 

fitted to the motor instead of the 

pull-cord starter. They then require only 

the hand-starter and a supplementary 

standard 7.2 V stick-pack with JST 

connector. 

Rotostart conversion set 

for Dr. Speed, Hobao motors 


Suitable for 3.5 to 4.6 cc motors 

(.21 and .28), replaces the pull-cord starter 

Universal Rotostart hand-starter 

with pin and ball, suitable for OS motors, 

ZY motors and similar starter systems 

with ball socket 


Rotostart conversion set 

for Nitro Bull, Force, SH motors 


Suitable for 3.5 to 4.6 cc motors 

(.21 and .28), replaces the pull-cord starter 

Universal Rotostart hand-starter 

with hexagon drive, for Dr. Speed, Nitro Bull, 

SH, Hobao, Force, etc. 


The illustration shows a 3.5 cc capacity 

NITRO BULL motor converted for 

use with the Rotostart system.

Oils, Silicone oils 

Silicone oils for shock absorbers 

Very high-quality silicone oil, ideal for 

use in oil-filled shock absorbers. We 

use pure silicone oil exclusively, without 

any additives or pigments. Under 

certain circumstances colouring agents 

can attack gaskets and other shock 

absorber components, but this does 

not apply to crystal-clear silicone oil 

from GM-Racing. Our oils are supplied 

in practical, reclosable 60 ml bottles 

applicator bottles. For comparison 

purposes the table also includes the 

earlier “WT” designations for the 

shock absorber oils. 

Order No. Viscosity WT 

in cps old 

95400 100 10 

95401 150 15 

95402 200 20 

95403 250 22.5 

95404 300 25 

95405 350 30 

95406 400 35 

95407 450 37.5 

95408 500 40 

95409 550 45 

95410 600 47.5 

95411 700 55 

95412 800 60 

95413 900 67..5 

95414 1000 75 

95415 1100 80 

95416 1200 85 

95417 1300 90 

95418 2000 130 

Silicone oils for differentials 

High-quality silicone oil for setting up 

bevel-gear differentials. The different 

viscosities can be used to optimise the 

locking effect of the differential to suit 

the race track in question. Each viscosity 

is supplied in its own container. 

Contents: 50 ml 

Order No. Viscosity 

in cps 

95430 800 

95431 1000 

95432 2000 

95433 3000 

95434 4000 

95435 5000 

95436 6000 

95437 7000 

95440 10000 

95441 20000 

95442 30000 

95443 40000 

95444 50000 

95445 100000 

95446 300000 

95415 95434 95440 

After-run oil 

Order No. 95450 80 ml 

Injected into motors after use. 

Maintains the film of lubricant 

and effectively prevents rusting. 

Universal cleaning putty 

Order No. 95451 180 g 

Ideal for cleaning soiled and oily surfaces. 

The putty can be forced into inaccessible 

areas, and easily picks up the soiling. 

Air filter oil, blue 


Perfect for re-impregnating cleaned 

foam air filters. 

Prevents dirt particles penetrating 

the motor. 


125 

Car models


Practical tools for model aircraft, helicopters, boats and cars 

Universal tyre sanding machine 

for 1 : 8 to 1 : 12 


Fully automatic advance, right / left. 

Switchable to internal and external 

battery power supply. 

Wheel adaptor 

Order No. 98000.1 for 1 : 8 On-Road 

Order No. 98000.2 for 1 : 12 On-Road 

Order No. 98000.3 for 1 : 10 Scale 

Extra-long glowplug spanner 

With magnet and 7 mm socket as 

accessories 


Special ball-link tool 


Special tool for screwing 5 mm and 6 mm 

ball-links onto pushrods. The plastic link can 

be screwed onto the thread pushrods without 

requiring force, and without being damaged; 

the link can then be pressed onto the ball-end 

bolt to produce a slop-free linkage. 


Puller for flywheels, etc. 


Tool for fitting three-jaw clutches 


Tapered reamer 

3 – 14 mm, with aluminium protective cap 


Adjustable-length slot-head screwdriver 

with motor stopper 


Clutch installation tool, three-jaw 


Stepped tapered reamer 

3 – 15 mm: 7, 9, 11, 13 and 15 mm steps 


Exhaust manifold spring fitting tool 


This tools makes it very simple to fit the 

exhaust manifold and silencer springs. 

Flywheel tool and 17 mm spanner 


Ideal for fitting three-jaw and four-jaw 

clutches. The machined slots fit exactly 

over the clutch weight pins, making it 

straightforward to tighten the flywheel.

Accessories 

Glowplug energizer with 3000 mAh 

NiMH cell 


LED, white, 3 mm, pack of two 

Order No. 98028.1 with 160 mm leads 

LED, red, 5 mm, pack of two 


Fail-Safe Micro-Module, 4.8 - 6 V 


Ideal module for the throttle / brake servo. 

The user can program any desired fail-safe 

setting, e.g. the brake or neutral position. 

The servo then takes up this position if interference 

occurs, thereby avoiding damage to 

the model or even injury to spectators. 

LED, red, 3 mm, pack of two 


LED, yellow, 5 mm, pack of two 


Mini-Gyro for Drift Cars 


Special gyro system for the vehicles known 

as Drift Cars. 

LED, yellow, 3 mm, pack of two 


Fuel filter with one-way pump 


For pumping fuel into the carburettor 

(priming), only pumps in one direction. 

Must be installed the right way round. 

LED lighting control box for six LEDs 


Up to six different LEDs can be connected 

to this very small control unit. 

LED functions: ON / OFF / FLASH 

Box dimensions 26 x 26 x 18 mm 

LED, white, 5 mm, pack of two 


Fuelling bottle 

Order No. 98032 250 ml 


127 

Car models


Rain air filter, small, 

1 : 10 and 1 : 8 


Air filter set complete, 1 : 10, with oil 


Ballraced metal vehicle stand, black 


With magnet and shock absorber mounting, 

provides a simple means of filling shock 

absorbers. 


Air filter set complete, 1 : 16, 

1 : 18, with oil 


Rain air filter, large, 1 : 8 


Set-up film 


All-purpose film for perfect running gear 

set-up, suitable for various vehicle scales. 

The film can be stuck down to any flat surface. 

Suitable for on-road and off-road models. 

Self-adhesive film, 1 : 24 to 1 : 8 scale. 

Dimensions approx. 320 x 400 mm 

Oil-filled shock absorber stand, 

plus magnet 


A practical holding tool with integral 

magnet, for filling shock absorbers. 

Camber set-up gauge, 0 - 10° positive / 

negative 


Air filter set complete, 1 : 8, with oil 


Height set-up gauge, 

5.0 mm to 17.0 mm 

Order No. 98035

Aluminium holder 

with aerial tube 


Spring holder with 

aerial tube 


Aluminium fuel tubing joiner 


This fuel tubing joiner is indispensable: 

it is simply installed in the fuel line between 

the fueltank and the tuned pipe, or to form 

an extension. 

Multi-colour aerial tube with cap 

Order No. 98022 pack of six 

Aluminium self-locking nut 

Order No. 98018 4 mm, blue, pack of ten 

Special accessories 

for 1 : 8 scale 1 : 8 

Off-Road buggy and truggy 

17 mm spanner and motor stopper 


Special aluminium CNC three-jaw clutch 

with springs 

Order No. 90046.110 pack of three of each 

Steel clutch bell 

Order No. 98014 13-tooth with twin ballraces 



High-quality steel clutch bells for 1 : 8 scale 

off-road models such as HoBao etc. 

Ultra-lightweight construction with four 

additional cooling slots. 

Special three-jaw clutch with linings 

and springs 

Order No. 90046.59 pack of three of each 

Aluminium three-jaw competition clutch 


Screw / washer set for clutch bells 


Universal replacement part, and for perfect 

clutch clearance set-up. 


129 

Car models


HoBao Special Accessories and Upgrade Components 

Thorsen differential for front and rear 

Order No. 90047.54 

Buggy body shell, painted 8.5 

orange / black 

Order No. 90047.66 

Big Bore shock absorbers, front, 

complete 

Order No. 90047.14 pack of two 

Big Bore shock absorbers, rear, complete 



Thorsen differential as centre differentiall 

Order No. 90047.55 


red / white 

Order No. 90047.67 

Carbon fibre (CFRP) brake disc 

for Hobao 8 / 8.5 PRO / RTR 


This brake disc can be used with the original 

brake linings. In wet conditions use on the 

rear axle only. 

Truggy body shell, painted blue / white 

Order No. 90046.81 

Big Bore shock absorber springs, white 

Order No. 90047.68 pack of four, 

front + rear 

. 

Glass fibre (GRP) brake disc 

for HoBao 8 / 8.5 PRO / RTR 


This brake disc can be used with the original 

brake linings. In wet conditions use on the 

rear axle only. 


green / white 

Order No. 90047.65 

Big Bore shock absorber springs, red 

Order No. 90047.69 pack of four, 

front + rear 

Fueltank stand-off pillars 

HYPER 8 / 8.5 PRO / RTR 


This stand-off pillar set is the ideal method of 

mounting the fueltank in the HYPER.

Truggy Tyres 

Rear spoiler holder, 



These ultra-lightweight stand-off pillars are 

made of aluminium, and can easily be fitted 

in place of the original parts. 

HoBao Truggy Tyres and Wheels 

HoBao Truggy competition tyres are manufactured 

from a new, high-quality rubber 

compound for maximum grip combined with 

very low rates of wear. All HoBao Truggy 

wheels feature the 17 mm driver which has 

now become standard, so that they also fit 

virtually all other makes of 1 : 8 off-road car. 

Used in conjunction with HoBao tyres, the 

result is the perfect competition wheel for 

Truggy racing. The wheel, Order No. 

90046.112, was produced specially for the 

MAXX series of models, and enables 

operators of these vehicles to benefit from 

the advantages of HoBao Truggy competition 

tyres. 

Order No. 90046.112 Truggy wheels for 

MAXX to fit HoBao Truggy tyres 

Aluminium rear spoiler mounting 



These new aluminium universal rear spoiler 

mountings are extremely light in weight. 

Order No. 90046.52 

Truggy wheels, RTR with 17 mm adaptor 

Order No. 90046.53 Truggy tyres, RTR 

Order No. 90046.114 Truggy tyres, Spike 

Half-shaft for aluminium centre differential 



This driver is machined from a special heavyduty 

aluminium alloy which is also used in 

full-size aircraft construction. Approx. 50% 

weight saving compared with the original part. 

Order No. 90046.118 

Truggy wheels, Disk with 17 mm adaptor 

Order No. 90046.115 

Truggy tyres, Oval II R-compound 

Order No. 90046.117 Truggy tyres, Dog-bone 

Axle pin retaining screws 



These screws are made of aluminium, 

and are fitted in the rockers to secure 

the axle pins. 

Order No. 90046.116 

Truggy wheels, PRO with 17 mm adaptor 

Order No. 90046.113 

Truggy tyres, Swoosh 

Order No. 90046.119 Truggy tyres, Trapezoid 


131 

Car models


GM-Racing 1 : 8 Buggy Tyres 

GM-Racing 1 : 8 Buggy Tyres 

The GM-Racing 1 : 8 Buggy tyres are 

supplied pre-bonded to wheels with 

standard 17 mm drivers, and therefore 

fit virtually all 1 : 8 scale buggies. 

The Star Pin tyres are also available as 

complete wheels or as individual tyres. 

Diamond 

Order No.96003 

Wheels and inserts, pre-bonded, 

pack of two 

Quartz 



pack of two 


NSX Striker 



pack of two 

Granit 



pack of two 

Foam rubber tyres 


Wheels, pre-bonded, pack of two 

MRC 



pack of two 

Topaz 



pack of two 

STAR PIN A soft Order No. 96015 

on yellow disc wheels, pre-bonded, pack of two 

STAR PIN A soft Order No. 96017 

tyres alone, without wheel, pack of two 

Step-Pin 



pack of two 

Micro-Pin 



pack of two 

EVO STAR PIN A soft Order No. 96016 

on with disc wheels, pre-bonded, pack of two 

EVO STAR PIN A soft Order No. 96018 

tyres alone, without wheel, pack of two

ECO Star Pin and HoBao 1 : 8 scale Buggy Tyres and Wheels 

ECO Star Pin and HoBao 1 : 8 scale 

Buggy Tyres and Wheels 

The ECO Star Pin and Rallye Game 

tyres are complete wheels at a very 

reasonable price. 

The HoBao buggy tyres are supplied 

non-bonded, and fit all conventional 

1 : 8 scale buggies with the standard 

17 mm adaptor, like the various wheel 

designs. HoBao wheels are very light 

in weight and extremely strong, while 

the HoBao tyres are made from the 

new, soft competition compound. 

Five-spoke wheel, white 


Mini-X Spike tyre 

Order No. 90047.62 

pack of two. 

REC pattern tyre 

Order No. 90047.63 

pack of two 

ECO STAR PIN EVO 

Order No. 96021 bonded to white spoked 

wheels, pack of two 

Ten-spoke wheel, white 


Directional Spike tyre, 

Order No. 90047.64 

pack of two 

Rallye Game Radial 

Order No. 96022 bonded to white spoked 

wheels, pack of two 

Slick tyre 

Order No. 90047.59 

pack of two 

Micro Spike tyre 


TRI Pattern tyre 

Order No. 90047.60 

pack of two 

Disk wheels, yellow 


Disk wheels, withe 


TVRE treaded tyre 

Order No. 90047.61 

pack of two 


133 

Car models

2.4 GHz Graupner IFS system 

2.4 GHz Graupner IFS system 

Bi-directional, modular radio 

control system with intelligent 

frequency hopping process 

IFS - Intelligent Frequency Select 

Here we have a further milestone from 

Graupner’s RC development department. 

Just replace the RF module and 

receiver, and your radio control 

system immediately switches to the 

2.4 GHz band with its inherent security 

of transmission. The new Graupner 

IFS system is the result of several 

years of development work. Intensive 

practical testing has proceeded in 

parallel with the development phase, 

and this has confirmed the basic 

design concepts. The advantages 

speak for themselves: 

● In a matter of seconds you transform 

your previous 35 MHz or 

40 MHz system into a Graupner IFS 

system, working in the 2.4 GHz 

band. None of your transmitter 

settings are lost! 

● Bi-directional communication between 

transmitter module and the 

connected receiver. The data is 

transmitted and confirmed in fractions 

of a milli-second – in both 

directions! 

● Short, sharp pulsed signals effectively 

suppress possible interference 

signals. 

● The modular nature and backwards 

compatibility of the system make it 

possible to install the modules even 

in older systems - right back to the 

Graupner FM-6014 transmitter! 

● 120 models can be operated 

simultaneously. 

● If interference occurs, an intelligent 

frequency hopping process 

(registered patent) initiates a 

channel switch-over procedure. 

The transmitter and receiver 

modules switch over simultaneously 

– while the model is operating 

– and the user notices absolutely 

nothing. 


● After the binding process the receiver 

does not respond to any 

other transmitter signal, i.e. 

“channel clashes” – two transmitters 

on the same frequency – 

are eliminated at the system level. 

● Fail-safe functions can be programmed 

individually for each servo 

channel at the receiver: hold last 

position / run to individually programmed 

position. Fail-safe times 

can also be set to cope with catastrophic 

failure, e.g. transmitter 

battery collapse. 

● Individual servo channel assignments 

are possible at the receiver. 

● The transmitter output power is 

variable over several increments 

from 10 mW (approved all over the 

world) to 100 mW. Please check 

your national regulations before 

using the system! 

● The current drain is extremely low; 

even when set to maximum transmitter 

power the RF module draws 

less than 90 mA, which means that 

you can obtain much longer operating 

times whilst retaining your 

existing transmitter battery. 

● Data encoding and 64-bit error 

detection make it virtually impossible 

to send incorrect or invalid 

data to the servo outputs. 

● The 16-bit system provides a resolution 

of 65,536 steps, and this is 

available at the servo channels. The 

result is that your model responds 

more directly and with finer control 

to transmitter commands. 

● Special aerial technology eliminates 

the need for different aerials which 

respond to phase shifts or reflections. 

● Frequency conflicts and waiting for 

the frequency peg are now a thing 

of the past. 

● The system eliminates the need to 

set channels using the Synthesizer 

system, or physically to change 

plug-in crystals. 

● You have complete control over the 

model for as long as you can see it. 

● Real-time telemetry transmission 

from model aircraft, helicopter, car 

and boat: in preparation. 

Specification 

Range (six-channel receiver) 

– Up to 150 m on the ground *) 

with visual connection 

– Up to 500 m in the air with visual 

connection 

Range (six / ten / twelve-channel 

receivers) 

– Up to 800 m on the ground *) with 

visual connection 

– Up to 2000 m in the air with visual 

connection 

*) Ground range = »model standing in grass« 

Frequency 

– 2.4 GHz ISM band, intelligent 

frequency hopping process. 

– Approximately spherical Radio 

Frequency radiation characteristic, 

eliminating the need for multiple 

aerials. 

Resolution 

– 16 bits per channel (65,536 steps). 

– +/-10 ns servo signal accuracy. 

Susceptibility to interference 

– Chance of being on the same 

frequency as another module: 

1 in 18,446,744,073,709,552,000. 

– Up to 120 models can be operated 

simultaneously. 

Aerial length 

– Six-channel receiver: integral aerial. 

– 3 cm receiver aerial, completely 

enclosed in the case. 

– Transmitter: external aerial, approx. 

12 cm long. 


– Individually programmable 

Fail-Safe function for each channel. 

– Programmable servo channel 

assignment. 

– Bi-directional telemetry data 

interface. 

(exception: six-channel receiver). 

For further information on the 

„Connection of the Future“ 

please have a look at 

www.graupner-ifs-system.de

Graupner IFS-System modular, compatible 

with Graupner/JR module systems 

built since 1981, e.g. 


135 

R/C systems and accessories

IFS Transmitter Modules, Receivers, Accessories 

Transmitter modules 

XM-J1 IFS 


Transmitter module (Graupner/JR), 

hand-held transmitter 

For Graupner/JR transmitters 

347, 388, 783, 10S, 10SX, 

10X, 10IIs, 8103, 9393, 

mx-22 


23100 

23102 

XM-F1 IFS 


Transmitter module (Fut 9C) 

For Futaba transmitters 7U, 8U, 

9C and FN series. 

Not compatible with the 9Z 

23101 

XM-J2 IFS 


Transmitter module (Graupner/JR), traymounted 

transmitter 

For Graupner/JR transmitters FM-6014, 

mc-17, mc-18, mc-20, mc-24 

XM-J3 IFS (no picture) 



tray-mounted transmitter 

For Graupner/JR-transmitters 

mc-19/22 (without synth.) 

XM-J4 IFS (no picture) 



hand-held transmitter 

For Graupner/JR transmitters mx-24S 

XM-F2 IFS (no picture) 


Transmitter module (Fut 9Z) 

For Futaba transmitters 3PK, 3PJ, 7U, 

8U, 8J, 9C, 9Z and FN series 

Compatible Hitec transmitters: 

Optic 6, Eclipse 7 

XM-M1 IFS (no picture) 


Transmitter module, Multiplex 

For Multiplex EVO transmitters 

XM-M2 IFS (no picture) 


Transmitter module, Multiplex 

For Multiplex Profi transmitters

Receivers 

XR-6 IFS 


Weight-optimised IFS car receiver, 

for connection to three servos 

Dimensions approx. 35 x 26 x 10 mm 


23601 

XR-16 IFS 


Telemetry-capable IFS receiver, 

for connection to eight servos 



23602 

XR-20 IFS 


Telemetry-capable IFS receiver, 

for connection to ten servos 



XR-12 IFS 


Weight-optimised IFS receiver, 

for connection to six servos 



XR-24 IFS (no picture) 


Telemetry-capable IFS receiver 

for connection to twelve servos 



Accessories 

Graupner XZ-P1 IFS Programmer 


The programming adaptor is connected 

to the USB port of your PC via a mini- 

USB-B / USB-A lead (standard lead 

used for digital video and still cameras). 

This enables you to program the settings 

of your Graupner IFS transmitter 

module or receiver by wireless means. 

It is even possible to transfer new 

firmware versions into later transmitter 

modules and receivers; the PC software 

required for this is self-explanatory, 

and simple to use. 

The firmware can be downloaded from 

the IFS website. A further useful option 

is a graphic 2.4 GHz band scanner, 

which provides a fast method of 

checking the conditions on the band. 


IFS aerial 


Replacement aerial 

for the Graupner 

2.4 GHz IFS system. 

23300 


137 


COMPUTER-SYSTEM XD-6 iFS 

IFS Micro-Computer Racing System 


Ergonomically efficient, technically 

modern three-function radio control 

system exploiting 2.4 GHz Graupner 

IFS technology (Intelligent Frequency 

Select), designed for the demanding 

pro-standard RC model car and boat 

operator. 


XD-6 IFS 

● Micro-computer radio control 

system exploiting the latest 2.4 GHz 

Graupner iFS technology 

● Bi-directional communication 

between transmitter and receiver 

● No crystals, no channel setting 

procedures. Simultaneous use of up 

to 120 transmitters possible without 

interference 

● Ultra-fast transmission rate for 

extreme response 

● Rejects interference caused by 

electric motors, servos and electrical 

charge (metal-to-metal noise) 

● Stub aerial, folding and removable 

● Steering wheel with soft rubber 

lining and adjustable spring centring 

force, guaranteeing excellent grip 

and ultra-fine control 

● Large LCD screen provides clearly 

legible information regarding function 

data and set-up parameters, plus 

digital display of transmitter battery 

voltage 

● Visual and audible battery 

low-voltage warning 

● Four-button terminal for programming, 

and accurate setting of desired 

functions and parameters 

● Comprehensive individual set-up 

and programming facilities 

● Ten model memories for function 

and set-up data. Each memory can 

be assigned a brief model name 

Set contents 

XD-6 iFS transmitter with integral 

8NH-2000 TX transmitter battery 

(Order No. 2498.8TX), 

XR-6 iFS receiver (Order No. 23607), 

C 5177 servo, switch harness

Specification, XD-6 iFS transmitter 

Frequency band 2.4 ... 2.4835 GHz 

Max. D.C. transmitter 0.8 W 

input power 

Modulation Intelligent Frequency Select 

Servo resolution 65,536 steps (16-bit) 

Operating voltage 9,6 ... 12 V 

Current drain approx. 100 mA 

Control functions 3, 2 with trims 

Temperature range – 15° ... +55° C 

Aerial length approx. 110 mm 

Dimensions approx 240 x 180 x 90 mm 

Weight incl. battery approx. 640 g 

Specification, XR-6 iFS receiver 


Aerial Integral 

Servo functions 3 

Current drain approx. 60 mA/4,8 V 



Specification, C 5177 servo 


Operating voltage 4,8 ... 6 V* 

No-load current drain approx. 12 mA 

Max. current drain approx. 1,5 A 

Torque approx. 95 Ncm 

Angular travel approx. 2 x 45° 

Transit speed approx. 0,13s/40° 


Dimensions (LxWxH) approx. 

*4.8 V = 4 cells, 6 V = 4 dry cells 

39 x 19 x 40 mm 

Model Select 

Four independent model 

memories are available to the 

operator. 

Steering Master Adjustment 

Basic travel adjustment for the 

steering servo when the vehicle 

is running. 

Momentary Button Select 

As function button or 

momentary button for lap timer. 

Model Name 

A three-letter name can be 

assigned to each model. 

ST EXP 

Acting up steering servo, 

throttle and brake functions, 

programmable separately 

for each function. 

AUX 

Defines the third function as a 

linear servo or a two-position 

system. 

Throttle Deadband 

Adjustment 

Separately variable for the 

throttle and brake functions. 

Servo Reverse 

For steering, throttle and servo 

3, programmable separately. 

CPY 

Copies model-specific set-up to 

a vacant model memory. 


139 


Micro-computer radio control system exploiting 2.4 GHz 

Graupner IFS technology (Intelligent Frequency Select) 


Computer radio control system with 

twelve model memories, optimised by 

the use of top-level technology. Modern 

computer techniques and Graupner 

2.4 GHz iFS technology ensure excellent 

operational reliability. Bi-directional 

communication between transmitter 

and receiver. Simplified programming 

technology for straightforward programming. 

The high-contrast graphic LCD 

Twelve model 

memories 


mx-16 IFS 

screen provides an accurate display 

of battery voltage, modulation, model 

type, model name, model memory 

number, set-up data, throttle curves, 

collective pitch curves and model 

operating time. 

● Micro-computer radio control 

system exploiting the latest 2.4 GHz 

Graupner iFS Technology 

● Bi-directional communication between 

transmitter and receiver 

● No crystals, no channel setting 

procedures. Simultaneous use of up 

to 120 transmitters possible without 

interference

● Ultra-fast transmission rate for 

extreme response 

● Rejects interference caused by 

electric motors, servos and electrical 

charge (metal-to-metal noise) 

● Stub aerial, folding and removable 

● Transmitter operation and programming 

based on the proven 

concepts of the mc-19 to mc-24 

● High-contrast graphic LCD 

screen ensures perfect monitoring of 

set-up parameters, operational states, 

timers, transmitter battery voltage 

● Eight control functions with simplified 

method of assigning transmitter 

controls to auxiliary functions 

● Free assignment of all switches 

to switched functions: simply by 

operating the desired switch 

● Twelve model memories, latest 

form of back-up system, requires no 

Lithium battery 

● Four switches (of which one 

three-position switch, one momentary 

button, one analogue control, 

two digital controls installed as 

standard: freely programmable and 

therefore highly versatile 

● Function encoder with rotary roller 

and three momentary buttons for simplified 

programming and accurate set-up 

● Simple method of switching 

between stick modes 1–4 

● Graphic servo display provides a 

fast, simple overview for checking 

servo travels 

● Comprehensive fixed-wing and 

helicopter menus 

● Servo travel adjustment for all 

servo channels, separately variable 

for each end-point 

● Sub-trim for setting the neutral 

position of all servos 

● Two-stage Expo / Dual-Rate 

system, individually variable, 

switchable in flight 

● Mixer functions 

Programmable Fail-Safe function 

»Hold« or »run to pre-set positions«, 

individually variable for each separate 

servo channel 

● Stopwatch / count-down timer 

with Alarm function 

● Model copy function for model 

memories 

Set contents 

mx-16 iFS micro-computer synthesizer 

transmitter with integral NiMH 

transmitter battery, XR-16 iFS 

bi-directional 2.4 GHz iFS receiver, 

DS 5077 servo, switch harness 

Accessories 


121 Neckstrap, 20 mm wide 


3100.6 Telescopic transmitter aerial 

Specification 

Frequency band 2,4 ... 2,4835 GHz 


Control functions 8 functions 


Temperature range – 15 ... + 55 °C 

Telescopic aerial 10-section, approx. 1150 mm long 




Weight approx. 850 g incl. transmitter battery 


141 


Basic system display, fixed-wing model 

Normal display, which appears after the security channel query. Battery 

voltage / state of charge, model type AIRPLANE / HELICOPTER, PPM / 

PCM / SPCM modulation, model memories 1 to 12, nine-character model 

name, model operating time, timer display, active flight phase, channel. 

Model copy 

The copy menu makes it possible to copy tested model 

configurations to act as the basic set-up for a further 

model. 

Basic model settings (fixed-wing model) – part 3 – 

Phase 3, Trainer, swap receiver outputs. 

Transmitter control set-up menu 

The transmitter elements, present on the basic transmitter but 

not required, such as switches and proportional controls, are 

easily programmed as additional transmitter controls. 


mx-16 IFS 

Function select menu 

All set-up facilities are arranged on-screen in accordance 

with the selected model type. 


Model name, stick modes 1 – 4, modulation 

PPM / PCM / SPCM, motor at Ch1. 

Servo display 

Simultaneous graphic and numeric display of all servo 

positions in real time, permitting an immediate visual 

check of the programming already carried out. 

Dual-Rate & Exponential 

Dual-Rate and Exponential set-up programs with 

separate set-up facilities for ailerons, elevator and rudder, 

Dual-Rate 0 - 125%, Expo -100 to +100%. 

Model memory select menu 

Up to twelve models can be assigned names and 

symbols for straightforward memory management. 


Tail type, number of ailerons / flaps, timers, phase 2. 

Servo set-up menu 

All servo settings for the eight servos, including direction 

of servo rotation, centre and servo travels – all variable in 

a single menu. 

Flight phase trimming 

For each activated flight phase it is possible to set the 

trims accurately.

A selection of the most important functions 

and multi-function programmes 

Fixed-wing menu 

The possible ready-made mixer programs available for 

the selected model type and the set servo configuration 

are activated automatically, and can be adjusted 

individually. 

Basic model settings (helicopter) – part 1 – 

Model name, stick modes 1 – 4, PPM / PCM / SPCM 

modulation, swashplate settings. 

Helicopter mixers 

Flight phase dependent settings for throttle, collective 

pitch, tail rotor and gyro gain (sensitivity). 

Dual-Rate & Exponential (helicopter) 

Dual-Rate and Exponential set-up programs with 

separate adjustment facilities for roll, pitch-axis and tail 

rotor, 0 – 125%, Expo -100 +100%. 

Programmable curve mixers 

Three variable curve reference points enable the user to 

set virtually any control characteristic. 


Rotor direction, collective pitch minimum, Timers, Phase 

2. 

Swashplate mixers 

Accurate set-up facilities for collective pitch, roll and 

pitch-axis mixers. 

Free mixers 

The three universal programmable mixers allow the user 

to program various special functions. 


Auto-rotation, Trainer, swap receiver outputs 

Fail-Safe monitor 

Display of the fail-safe positions (Hold / Preset) 

programmed in the model memory for the selected 

model, separately for each servo. 


143 


Micro-computer radio control system exploiting 

Graupner IFS 2.4 GHz technology (Intelligent Frequency Select) 

Radio control set 


Professional high-technology microcomputer 

radio control system exploiting 

Graupner 2.4 GHz iFS technology, 

with bi-directional communication between 

transmitter and receiver. Featuring 

Ultra-Speed Low-Power Single-Chip 

Micro-Computer (256 kByte), 2 Mbit 

Flash memory, 16 kByte (128 kbit) RAM 

and 73 ns command cycle! 

With integral high-speed precision A/D 

converter and Dual-Function Cylinder- 

Rotary-Encoder with 3-D 

Rotary-Select programming technology. 

All ready equiped 

with all proportional 

controllers and 

switches 


mx- 

30 model memories

● Professional standard microcomputer 


exploiting the latest Graupner iFS 

2.4 GHz technology 

● Bi-directional communication 

between transmitter and receiver. 

● No crystals, no channel settings 

required. Simultaneous operation 

of up to 120 transmitters possible 

without interference problems. 

● Ultra-fast transmission rate 

for super-fast response 

● Completely eliminates interference 

from electric motors, servos and 

electrical charge (metal-to-metal 

noise). 

● Short aerial, folding, removable 

● Future-proof due to updatecapable 

operating system 

● Thirty model memories 

● 3-D Cylinder-Rotary encoder and 

four programming buttons for 

accurate settings and high-level 

programming convenience. 

● MULTI-DATA GRAPHIC LCD 

monitor: high-resolution screen 

ensures perfect monitoring, 

accurate graphical depiction of 

multi-point curves for throttle, 

collective pitch, tail rotor etc., 

plus EXPO / DUAL-RATE functions 

and mixer curves. 

● Simple method of switching 

between stick modes 1 - 4. 

● Real Time Processing (RTP). 

All entered settings and changes 

take effect at the receiver output 

virtually in real time. 

● ADT Advanced Digital Trim system 

for all four stick trim functions, 

with quick-response throttle idle 

trim. 

● Six freely programmable mixers, 

four linear and two five-point 

curve mixers, variable in 1% 

increments. The throttle and 

collective pitch curves present in 

the Helicopter Menu feature a 

multi-point curve system (MPC). 

This curve rounding system can 

be switched on and off, and is 

also available in the free curve 

mixers. The system generates an 

ideally rounded curve shape by 

means of an ingenious polynomial 

approximation process. 

● Two-stage Expo / Dual-Rate 

system, individually variable, 

switchable in flight, programmable 

separately for each model. 

● Helicopter swashplate mixer 

for 1-point, 2-point, 3-point and 

4-point mixing. 

● Sub-trim for fine-tuning the neutral 

position of all servos. 

● Aileron differential mixer 

● Butterfly mixer 

● Flaperon mixer 

● Graphical servo display provides 

a fast, straightforward method of 

viewing and checking all servo 

settings. 

● Servo travel limit for all servo 

channels, separately variable for 

each end-point. 

● Stopwatch / Count-down timer 

with alarm function. 

● Operating hours timer, available 


● HELP BUTTON provides valuable 

notes on programming, relevant 

to the currently selected programming 

menu. 

● Model copy function for all model 

memories. 

Set contents 

mx-22 iFS micro-computer synthesizer 

transmitter with integral NiMH transmitter 

battery, XR-20 iFS bi-directional 2.4 

GHz iFS receiver, DS 5077 servo, 

switch harness 




Accessories 





4178.1 Diagnosis lead 

3290.22 Trainer / PC module for mx-22 

3290.33 Pupil module for mx-22 

4182.9 PC interface lead, mc-22 / PC 

9 Aluminium transmitter case 

Technische Daten 

mx-22 IFS 


Frequency band 2.4 ... 2.4835 GHz 


Control functions 10, 4 with proportional trims, 4 proportional, 2 switchable 


Temperature range –15 +55 °C 





Weight approx. 

* with receiver XR-24 iFS 


970 g incl. transmitter battery 


145 


A selection of the most important function and 

multi-function programmes 

Dual-Function Cylinder-Rotary encoder with 3-D 

Rotary-Select programming technology 

Switch overview 

The function of all external switches and transmitter control 

switches are displayed in real time. This overview helps to 

detect and avoid errors such as double assignments and 

programming errors. 


mx-22 IFS 

Channel 1 curve 

A five-point control curve can be superimposed on the Ch1 

stick, enabling the user to adjust the stick response to the 

requirements of the model or personal preferences. 

Basic set-up menu 

Basic model data such as name, stick mode, modulation 

and digital trim increment size. 

Copy flight phases 

All entered settings can easily be copied into a different flight 

phase. This reduces the complexity of re-programming; 

instead simple alterations are sufficient. 

Model type 

Simply by defining the model configuration - such as tail type 

and number of wing flaps - the program automatically determines 

all the requisite functions in the programming menu.

Suppress menus 

Irrelevant programming menus can be suppressed in order 

to make the program select procedure even easier to understand. 

Dual mixer menu 

Dual mixers for simultaneous same-direction / oppositedirection 

coupling of two channels, such as camberchanging 

flaps with aileron function, and vice versa. 

Wing mixer menu 

The possible and relevant ready-made fixed-wing mixer programs 

are automatically activated according to the selected 

model type and the set servo configuration, and can then be 

adjusted individually. 

Function select menu 

All adjustment facilities are clearly arranged according to the 

selected model type. 

Servo display 

Simultaneous graphical and numerical display of all servo 

functions in real time, providing an immediate visual check of 

your programming actions. 

Servo set-up menu 

All servo settings, such as servo direction, centre position, 

servo travels and servo travel limits, can be adjusted in a 

straightforward manner in a single menu. 


Up to thirty models can be assigned individual names and 

managed in a clearly comprehensible manner. A display of 

operating time for each model represents a useful aid for 

modellers who wish to keep to a strict schedule of model 

maintenance. 

Flight phase set-up menu 

Each flight phase can be assigned its own name. Separately 

variable transition times prevent abrupt servo movements, 

and permit a smooth »blending« when switching flight phases. 

Freely programmable curve mixers 

Five freely variable curve reference points and MPC curve 

algorithms enable the user to set virtually any control 

characteristic. 

Multi-Point Dual-Rate / Exponential control characteristic 

curves 

Separately variable for aileron, elevator and rudder functions 

with progressive or degressive curves. Set values are switchable 

if a switch is assigned to the function. 

Timer menu 

Comprehensive timer program with versatile stopwatch, 

count-down timer with variable alarm pre-warning system 

and model / flight timer. 

Flight phase assignment menu 

A comprehensive combination of switches can be used to 

activate individual flight phases. A priority switch function 

permits direct switching from any other flight phase. 


147 


Micro-computer radio control system 

incorporating the latest Synthesizer 

technology; six control functions 


Order No. 4745 35 / 35 MHz B-band 

Order No. 4747 40 / 41 MHz band 


mx-12S 

Ten model memories 

Computer radio control system with ten 

model memories, optimised by the 

incorporation of top-level technology. 

Modern computer system for high 

operational security. Simplified programming 

technology for straightforward 

programming. High-contrast graphic 

screen for accurate display of battery 

voltage, modulation, model type, model 

name, model memory number, set-up 

data, throttle curves, collective pitch 

curves and model 

operating time.

● Synthesizer system with channel 

select, to prevent accidental operation 

on an inappropriate frequency 

● All-purpose radio control system, 

fully expanded, for F3A, F3B, F3C, 

F3D, F3E, Delta and V-tail models 

with six control functions, four with 

proportional trims, two switched 

● Convenient mode selector: 

simple method of switching between 

stick MODES 1 to 4 (throttle right / 

left). All mixer, set-up and reverse 

memory data is switched automatically 

when you change stick modes. 

● Convenient fixed-wing mixer 

programs: DIFFERENTIAL- 

FLAPERON (aileron differential mixer), 

ELEVON (Delta, aileron / elevator 

mixer), V-TAIL (V-tail, elevator / rudder 

mixer) 

● Convenient swashplate 

programs: SWASHPLATE TYPE 

(one swashplate servo, two servos 

180°, three servos 120°, three servos 

90°) 

● Ten model memories with 

automatic adoption of all essential 

programming set-up parameters 

● Compatibility with FM, FMss (PPM) 

and SPCM receiving systems 

● High-contrast Multi-Data screen 

for accurate checking of functions, 

set-up values, directions of servo 

rotation, trim values, programming 

information (for multi-function 

programs) plus the operating voltage 

of the transmitter battery, as displayed 

on the transmitter screen. 

● Standard mixer systems plus 

accurately variable servo end-points 

and centre positions enable the 

demanding modeller to use the 

system to control model aircraft, 

boats and cars. 

● REVERSE function, 

programmable for six servos 

● MONIT servo travel: 

monitor for six servos 

● MODEL NAME 

and model number, separately 

programmable 

● MODULATION: switchable PPM / 

SPCM 

● DUAL RATE / EXPO: programmable 

and switchable between two 

positions, adjustment range 5 to 

125% for three servo functions 

● DIFFERENTIAL FLAPERON 

(differential aileron mixer) 

● SUB-trim memory system for centre 

offset of all servos, also for adjusting 

earlier makes or servos with nonstandard 

centre point 

● TRAVEL ADJUST: separate travel 

adjustment for both end-points of all 

servos, adjustment range 0 to 150%. 

This new type of adjustment makes it 

possible to program symmetrical and 

asymmetrical servo travels, e.g. to 

cater for warped wings or similar 

applications. 

● DSC socket for connection to a 

flight simulator 

● Integral visual and audible alarm 

system for transmitter and lithium 

back-up battery 

Set contents 

mx-12S micro-computer Synthesizer 

transmitter with integral NiMH transmitter 

battery, R16SCAN FM narrow-band 

miniature receiver on the appropriate 

frequency, C 577 servo, switch harness. 

Specification 

Accessories 





Transmission system FM / FMss (PPM) and SPCM 

RF module Integral Synthesizer transmitter module 

(35 / 35 MHz B, 40 / 41 MHz band) 

Channel spacing 10 kHz 

Control functions 6 functions 

Channel pulse width 11.5 ms + 0.5 ms 

Temperature range - 15 ... + 55° C 





Weight approx. 870 g incl. transmitter battery 


149 


Basic system display 

Normal screen display when the transmitter 

is switched on: battery voltage / state of 

charge, model type (AIRPLANE / HELICO- 

PTER), PPM / SPCM modulation, model 

memory No. 1 - 10, model name (eight 

characters), model operating time TOTAL T. 

D/R & EXP 

Dual Rate and Exponential set-up programs 

with separate adjustment facilities for Dual 

Rate and Exponential function for ailerons, 

elevator and rudder; Dual Rate 0 – 125 %, 

EXPO –100 % to +100 % 


mx-12 S 

STICK MODE 1 – 4 

Stick function mode. Selectable sequence of 

control functions (MODE 1 - 4), throttle left / 

right, matched to the requirements of the 

individual pilot. 

SUB TRIM 

Servo centre offset for six servos, ±125 

steps, for throttle, ailerons, elevator, rudder, 

gear (retracts) and collective pitch functions, 

model-specific, can be varied and stored 


LIST MODE set-up menu 

This menu is used to select and adjust 

model-specific and pilot-specific parameters, 

e.g.: Dual Rate, travel adjust, servo reverse, 

sub-trim, mixer and monitor program. 

WING TYPE 

Wing type select menu 

FLAPERON (2 ailerons), ELEVON (delta 

system) and V-TAIL. The mixer and servo 

functions required are automatically assigned 

when the appropriate wing type is selected. 

Simple method of setting parameters such 

as servo travels, servo centre, mixer and 

switch functions. 

SWITCH SEL 

Select menu for switch assignment: position 

and assignment of the operating switches 

for Dual Rate, gear (retracts), mixer and flap 

systems 

DIFFERENTIAL ELEVON (Delta) 

Differential for delta models with differential 

mixer 0 – 100 % (split mode), variable to suit 

the desired model characteristics.

A selection of the most important function and 

multi-function programmes 

TRAVEL ADJ 

Separate travel adjustment left and right, 

range 0 – 150 %, for throttle, ailerons, elevator, 

rudder, retracts and collective pitch 

functions. 

120° CCPM 

Set-up menu for fine adjustment of the 

swashplate system, useful for trimming out 

system inaccuracies 

PITCH CURVES 

A five-point collective pitch curve system 

provides very accurate collective pitch hover 

adjustment. Full-Slow position, ¼ position, 

centre position, ¾ position and Full-High 

position, all variable separately. 

MODELL COPY 

The copy menu allows the operator to copy 

tested model configurations into a vacant 

model memory as the starting point for a 

new model. 

REVERSING SW 

Servo reverse switching for throttle, ailerons, 

elevator, rudder, retracts and flap servo, can 

be selected and stored separately for each 

model. 

THRO CURVES 

A five-point throttle curve system permits 

accurate fine-tuning of motor characteristics 

to suit the requirements of the helicopter 

MONIT servo travel monitor 

The graphic servo travel monitor provides 

the means to check all servo functions 

simultaneously for servo centre and travels. 

SWASH TYPE 

Swashplate type, one servo: standard 

mechanical mixing. This type uses separate 

servos for the roll, pitch-axis and collective 

pitch functions. 

Basic HELI system display 

Transmitter screen displays, transmitter battery 

voltage / state of charge, HELI model 

type, model memory No. 1 - 10, model 

name (eight characters), PPM or SPCM 

modulation, and TOTAL T (model operating 

time). 

MODULATION 

PPM or SPCM modulation can be set separately 

for each model memory to suit the 

receiving system installed in the model 

FAIL SAFE 

In SPCM MODE it is possible to program a 

PCM Hold position for the servo functions. 

Fail-safe programming is not possible in 

PPM MODE. 

SWASH TYPE 

Swashplate type, two servos: mixer for three 

roll / collective pitch servos; the pitch-axis 

function is mixed in mechanically. 

MODEL SEL 

In the Model Select menu ten models can be 

stored separately, and called up when required. 

The memories contain model type, PPM 

/ SPCM modulation, model memory No. 1 - 

10, model name and model operating time. 

REVO MIX 

All-purpose programmable mixers provide 

for programming of extreme auxiliary functions, 

such as revolution mixing for model 

helicopters. 

THROTTLE HOLD 

The Throttle Hold menu enables the user to 

set the auto-rotation throttle position accurately. 

SWASH TYPE 

Swashplate type, three servos: symmetrical 

three-point linkage, all three servos are used 

for all three functions: roll, pitch-axis and 

collective pitch. 


151 


The new generation of radio control technology, with twelve 

control functions 

Transmitter alone, in case 

Order No. 4730.77 35 / 35 MHz B-band 

Order No. 4748.77 40 / 41 MHz band 


mx-24s PROFI 

The new mx-24s transmitter takes the form of an 

ergonomically efficient hand-held device offering smooth 

handling and maximum possible operating convenience. 

It is a development of the highly successful mc-24 PROFI, 

thousands of which are now 

in use. As with its smaller 

sister - the mx-22 - the 

transmitter features four buttons 

and a two-level digital 

3-D ROTARY control, making 

it straightforward to program 

even for the inexperienced 

modeller.

We have gathered experience and 

feedback from many pilots who have 

used the mc-24 PROFI, with the result 

that many new ideas have been incorporated 

into the overall software design 

of the mx-24s. The mc-24 system has 

been highly successful all over the 

world, and this pioneering development 

in high-end radio control system software 

has been made possible by countless 

hours of teamwork involving the 

GRAUPNER software team, professional 

and contest pilots specialising in a 

vast range of different model types, and 

renowned world-ranking pilots, all of 

whom have tested the system in national 

and international competitions and 

events of all disciplines, without overlooking 

the requirements of the beginner. 

Compared with the new version first 

shown in 2007, the system’s operating 

convenience has been further improved. 

For example, the following facilities 

are now provided for controlling the 

numerous functions of the mx-24s: 

Transmitter controls and switches: 

The mx-24s is fully kitted out for controlling 

up to twelve servos, so that 

even scale enthusiasts and model boat 

fans will find all the controls they need. 

New communication modes 

● PPM10 for Pico receivers used in 

indoor models, fun-flyers, small helicopters, 

model cars and similar, i.e. 

models which are controlled using no 

more than five servos. The reduced 

cycle time produces extremely fast 

response to control commands. 

● APCM24 for the demanding pilot 

who wishes to operate models equipped 

with up to twelve servos, and who 

places stringent demands on the accurate 

synchronisation of all servos - e.g. 

for high-speed models. 

New RF SYNTHESIZER module: 

Eliminates crystal swapping in the 35 / 

35 MHz B-band and the 40 / 41 MHz 

band. The desired channel is set in the 

software, and is confirmed by a security 

query. 

Integral dual-conversion scanner: 

Another new safety feature is an 

automatic check of radio channel 

assignments at the flying site; the mx- 

24S checks this every time you switch 

it on. 

Backlighting: 

For the generously dimensioned LCD 

graphic screen. This improves legibility 

considerably, especially in poor lighting 

conditions. 

Model memory recognition: 

The model memory number is transmitted 

once to the amc-24DSCAN receiver, 

which stores the information. Thereafter 

the receiver will only respond to this 

model memory, thereby eliminating the 

possibility of launching a model with the 

wrong memory accidentally set at the 

transmitter - a not insignificant safety 

aspect which applies equally to all 

areas of RC modelling. 

Swashplate limiting: 

This function limits the angle of inclination 

of the swashplate, and prevents it 

striking other mechanical parts when 

full roll and pitch-axis commands are 

given during 3-D helicopter flying. 

Auto-Trim function: 

This function provides a means of storing 

the current stick positions with a 

single button-press when a fixed-wing 

model or helicopter is being trimmed: 

the pilot uses the sticks to set the 

model “straight and level”, operates the 

switch, and then releases the sticks 

again. The correction is then “blended 

in” when the pilot lets go of the sticks. 

Ch1 switch: airbrake / electric motor: 

Expanded flight phase programming 

makes it child’s play to set up this 

method of switching: the pilot decides 

the stick positions (forward / back) at 

which the motor is switched off and the 

airbrakes are retracted. 

For comprehensive information about 

the new functions of the mx-24s 

please visit the Graupner website at: 

www.graupner.de. 

The transmitter checks whether the desired channel is already in use - directly after it is switched on. 

The entire frequency band can be checked for occupied channels by pressing a button. 

A new feature in the helicopter mixer menu is »swashplate limiting« for 3-D helicopter flying. 


153 


Micro-computer radio control system incorporating the latest Synthesizer technology, 

with twelve control functions 




Transmitter alone 

Order No. 4710.77 35 / 35 MHz B-band 

Order No. 4719.77 40 / 41 MHz band 


mc-19S 

● Four-language dialogue menu 

(German, English, French, Italian) 

● Twenty model memories 

● Synthesizer channel select with 

security menu to avoid the transmitter 

being switched on accidentally 

● Selectable modulation types: 

SPCM, PCM 20, PPM 18, PPM 24 

The illustration shows the transmitter fitted out with optional items.

● Twelve control functions: 

simplified method of assigning control 

elements such as primary sticks, 

external switches, proportional controls 

and trim levers as transmitter control 

functions for multi-function model 

boats and cars, without the need to 

install external switches or switch 

modules 

● Future-proof: update-capable 

operating system 

● 3-D Rotary Encoder in conjunction 

with four programming buttons for 

easy, convenient and accurate setting 

of values 

● MULTI-DATA GRAPHIC LCD 

monitor: high screen resolution for 

accurate monitoring and precise 

graphic display of curves and 

characteristic lines 

● Real Time Processing (RTP): 

settings and changes take place 

virtually in real time 

● ADT (Advanced Digital Trim System) 

● CONVENIENT MODE SELECTOR: 

simple method of switching stick 

modes 1 - 4 (e.g. throttle right / 

throttle left) 

● Three freely programmable 

mixers for RC model aircraft, 

helicopters, boats, cars and trucks 

● Three-point mixers for throttle, 

collective pitch and tail rotor, plus 

gyro offset. These settings can be 

entered separately for each flight phase 

● Fixed-wing / Helicopter: Dual Rate / 

Expo for Ch2 - Ch4 (switchable in 

common for each channel) 

● Phase trim according to model 

type: camber-changing flaps, ailerons, 

elevator 

● Helicopter swashplate mixers for 

1-point, 2-point, 3-point and 4-point 

linkages 

● Comprehensive fixed-wing mixer 

menu with twelve set-up programs 

for two ailerons and two camberchanging 

flaps (number of servos) 

● Servo travel settings for twelve 

servos, servo reverse, servo centre, 

servo travel, variable separately for 

each side, graphic display for all servos 

● Fail-Safe programmable for PCM / 

SPCM 

● Two switch-operated timers, 

stopwatch and flight time / running 

time 

● HELP BUTTON with notes relating 

to the currently selected programming 

menu 

● Trainer system with total control 

transfer; all settings entered at the 

Teacher transmitter 

● Nautic control function for operating 

the Nautic Expert module 

● Model copy function for all model 

memories 

Set contents 

mc-19S micro-computer Synthesizer 

transmitter with integral NiMH battery, 

R16SCAN FM narrow-band miniature 

receiver on the appropriate frequency, 

C 577 servo, switch harness 

Accessories 


10.1 Aluminium transmitter case 

71 Luxury neckstrap 

72 Luxury cross-over strap 

72.40 De luxe cross-over strap 

1125 Wide neckstrap 

1127 Transmitter support system 

1128 Short stick 

3289 Trainer system 

3290.3 Pupil module 

4110 Protective caps for 

stick-switches 

1149.35 Helical stub aerial, 35 MHz 

1149.40 Helical stub aerial, 40 MHz 

3093 CONTEST carbon-look 

transmitter tray 

3098 Windshield for carbon-look 

transmitter tray 

4182 Programming interface 

mc-19S/mc-22S 

4182.3 Interface distributor 

4182.9 PC Interface lead 

mc-19S/mc-22S 



4300.6 Telescopic aerial 

.60 Stainless steel telescopic aerial 

Specification 

Transmission system SPCM 20 / PCM 20 / PPM 18 / PPM 24 selectable 

RF module Integral transmitter Synthesizer module 

(35 / 35 B-band, 40 / 41 MHz band) 


Control functions SPCM = 10, PCM = 10, PPM = 9, PPM 24 = 12 

Basic control functions 6 functions 

Control channels 10 (4 proportional with trims, 6 proportional or switched) 

plus 2 software control functions 

Channel pulse width 1,5 ms + 0,5 ms 

Servo travel resolution SPCM 20 10-bit (1024 steps), PCM 20 9-bit (512 steps) 

Temperature range – 15 ... + 55 °C 



Current drain approx. 40 mA (excl. RF module) 


Weight approx. 900 g excl. transmitter battery 


155 



mc-19S 

Digital Synthesizer channel generation 

All channels on each frequency band can be set digitally on the transmitter. 

Power-on menu for the model in the selected memory, showing memory number, 

model name, operating voltage and function menu. 

Function select menu for fixed-wing, helicopter, boat and car/truck, for simple 

programming. 

Security channel query 

Displayed when the transmitter is switched on: enables the user to switch the 

modulation on / off, and to change channels. 

5-point helicopter mixer 

For individual setting of throttle curve, collective pitch curve and torque balance 

curves - for the most important setting procedure of a helicopter model. 


Up to 20 models can be managed easily by memory number plus assigned names. 

Basic model set-up 

Model name, stick MODE 1 - 4, modulation, swashplate type (1 - 4 servos).

Modulation select menu, Programming the Ch1 function, tail type (normal / Vtail), 

number of aileron and flap servos. 

Ultra-simple automatic switch assignment: 

simply operate the desired switch. 

Dual-Rate / Expo settings. Typical Heli set-up: Roll-axis, pitch-axis and tail rotor servo 

Super servo menu for 12 servos. Direction of servo rotation, centre setting and servo travels 

programmable symmetrically or asymmetrically, ultra-simple method using a single menu. 

All non-essential controls present on the basic transmitter, such as switches and 

proportional sliders, can easily be programmed as transmitter controls. 

Fixed-wing mixer settings: 12 mixer and adjustment facilities: aileron / rudder, 

aileron / flap, airbrake / elevator, airbrake / flap. 

Typical set-up, Ch1 Heli: Collective pitch, throttle, tail rotor and gyro 

Fixed-wing mixer settings. Airbrake / flap, airbrake / aileron, elevator / flap 

New type of Select System provides comprehensive switching facilities in 

Nautic mode. 

HELP menu, important information on programming and use of each program 

setting, dedicated Help menu can be called up. 

157 



Receiver, servos, accessories 

amc24DSCAN 

APCM-SYN dual-conversion receiver 



Highly selective, narrow-band APCM 

dual-conversion SCAN receiver exploiting 

the latest Synthesizer techniques 

and APCM (Advanced PCM) technology. 

The new APCM 24 modulation transmits 

twelve servo channels with equal priority. 

This results in major improvements over 

previous types of modulation, which are 

especially noticeable with high-speed 

model aircraft such as jets, and gliders 

with six to eight wing flaps. The new 

system eliminates the familiar delay in 

response from servos connected to the 

high-number receiver outputs. 

The amc24DSCAN receiver is equipped 

with a modern model memory recognition 

circuit. During the SCAN process 

the transmitter sends the model memory 

number, and the information is stored 

in the receiver. When the SCAN process 

is complete, the receiver only 

responds to this model memory, thereby 

eliminating the possibility of launching 

a model with the wrong memory 

set at the transmitter: a not insignificant 

safety aspect which is relevant to all 

areas of RC modelling. 

Specification 


Current drain approx 110 mA 

Spot frequencies, 35 MHz 61...80/182...191 

Spot frequencies, 40 MHz 50...92/400...420* 


Sensitivity approx. 7 μV 

Type of modulation APCM 24 (1024 Step) 

Servo functions 12 

Temperature range –15 ... + 55 °C 

Aerial length approx 1000 mm 



*41 MHz only approved for use in France 


DS 288 180° Digital Micro Power 

servo DS 288 


This digital micro power servo is 

controlled by a new type of intelligent 

micro-controller which checks the 

control signals and compensates automatically 

for defects such as incorrect 

signals, thermal drift and other 

parameters which can interfere with 

the system. Long-life electric motor with 

carbon brushes for extended useful life. 

Extremely accurate centring, very 

high resolution and smooth travel 

characteristics, with 13-bit ACD system 

and 5900 steps over the full angular 

travel of 180 degrees. Special components 

provide ultra-low temperature drift 

and good resistance to vibration and 

shock loads. High electric motor pulse 

frequency of up to 300 Hz avoids 

premature motor wear and ensures 

high load capacity. 

5181 

5185 

Digital-Ultra-High-Speed-Servo 

DS 8922 


Digital ultra-high-speed power servo for 

RC model cars and top-level high-speed 

models of all types which require ultrahigh 

transit speed combined with high 

torque. 

Substantially improved development of 

the DS 8417, DS 8418 and DS 8822 

high-speed servos, which have been 

very successful all over the world. 

Particularly recommended for 1 : 8 

scale off-road car operators. Metal race 

gears, metal output shaft and twin ballraces 

ensure excellent reliability and 

extreme performance figures. Precision 

high-performance bell-armature motor 

with large aluminium case block for 

optimum motor cooling, combined with 

heavy-duty electronics, endow this ultra 

high-speed servo with optimum 

characteristics and high torque capacity. 

The digital ultra-high-speed servo is 

recommended for 1 : 8 scale off-road 

RC cars, model jets and high-speed 

models generally. 

The servo is supplied complete with a 

heavy-duty 84 mm aluminium output 

arm for symmetrical (two-sided) control 

surface linkages. Not suitable as a tail 

rotor servo for use with a piezo gyro. 

Digital-Super-Power-Servo DS 8911 


Digital super-power servo for absolute 

top-notch models of all kinds. A significantly 

improved development of the DS 

8311, DS 8411, DS 8511 and DS 8811 

series of power servos, which have 

been successful all over the world. 

Recommended for pro-standard 

operators of all classes - wherever the 

requirement is for maximum possible 

functional reliability combined with 

extreme performance parameters. 

Metal gears, metal output shaft, twin 

ballraces and optimised cooling of the 

precision high-performance bell-armature 

motor, with large aluminium case 

block for excellent resistance to shock 

loads, and extreme performance figures. 

This digital super-power servo is 

recommended for top-class model jets, 

large-scale models and RC model cars. 

The servo is supplied with a heavy-duty 

84 mm aluminium output arm for symmetrical 

(two-sided) control surface linkages. 

5190 


and 5190 include 

heavy-duty aluminium 

output arm

3832.1 

3832.3 

Specification servos 

Example of use 

Example of use 

3832.2 

Servo mounts 

Order No. 3832.1 for standard servos 

Order No. 3832.2 for DS 3210 servo 

Order No. 3832.3 for servos such as DS 3328 / C 3341 

These servo mounts are accurately laser-cut from beech 

plywood, and are simply glued at the appropriate positions in 

the wing, tailplane or fuselage. The servos are then secured 

using self-tapping screws, allowing them to be removed 

again at any time. 

Type DS 288 DS 8922 DS 8911 

Order No. 5181 5185 5190 

Operating voltage approx 4,8 ... 6 V 4,8 ... 6 V 4,8 ... 6 V 

No-load current drain approx. 14 mA 13 mA 14 mA 

Current drain max. approx. 285 mA 2600 mA 2750 mA 

Torque approx. 9 Ncm (0,9 kg/cm) 140 Ncm 270 Ncm 

Holding power approx. > 50 Ncm 272 Ncm 328 Ncm 

Angular travel approx. 2 x 90° 2 x 45° 2 x 45° 

Transit speed approx. 0,16 s/40° 0,058 s/40° 0,1 s/40° 

Weight approx. 9 g 69 g 69 g 

Dimensions (L x W x H) approx. 22 x 21 x 11 mm 40 x 21 x 40 mm 40 x 21 x 40 mm 

Electronic On / Off switch 


Radio-controlled electronic On / Off 

switch, up to 12 V / 8 A capacity, with 

integral battery monitor. 

Dimensions (L x W x H) 

approx. 60 x 19 x 14 mm 

Dual power supply 


Dual power supply unit for receiving 

systems, suitable for LiPo batteries, 

with integral battery monitor. 

Operated by a magnet switch. 



Magnet switch operated On / Off 

switch 


Magnet switch operated On / Off 

switch with regulated output voltage for 

receiver power supply with two LiPo 

batteries, with voltage monitor. 



High current On / Off switch 


Electronic, high-current, failure-proof, 

zero-contact On / Off switch for RC 

systems and electrical consumer units. 

10 A continuous current / 20 A peak 

current 




159 


R/C accessories, gyro systems 

CONTEST carbon-look transmitter 

tray for mx-22 and mx-24s 

hand-held transmitters 


Modern carbon-look finish, ergonomically 

and functionally efficient, designed 

for easy operation of all proportional 

and switched functions on hand-held 

transmitters. 

Outstanding features of the Carbon 

CONTEST transmitter tray are its 

modern styling and proven twin-shell 

construction, plus strong integral 

CONTEST transmitter supports for 

carrying the transmitter safely and 

comfortably. Technically ready for 

upgrading to 2.4 GHz iFS transmitter 

module systems. Carefully designed 

hand-rest areas whose height and 

shape guarantee fine, accurate and 

tireless control. Particularly practical 

detail features are the tool compartments 

with hinged covers, in which small 

items such as replacement parts, pairs 

of crystals and other hardware items 

can be stored conveniently. The boxes 

are fitted with integral vacuum-moulded 

internal wells which prevent small parts 

finding their way into the frame of the 

transmitter tray. 


De luxe cross-over transmitter 

strap 


For demanding competition pilots and 

glider flyers, who require a firm, securely 

located transmitter for extremely long 

and arduous flights. The de luxe crossover 

strap is finely adjustable to match 

the pilot’s body size. Outstanding features 

of the de luxe cross-over strap include 

40 mm wide webbing, even distribution 

of the load over both shoulders, and 

-made carabiner hooks guarantee good 

security and allow the transmitter to be 

disconnected quickly and easily, so that 

the de luxe cross-over strap can be left 

fitted to the pilot. 

Stub aerial with coil 

Order No. 3537.S 

black 

Length approx. 

290 mm 

The aerial for optimum 

reception. Suitable for 

use on model aircraft, 

boats and cars. The 

aerial can be mounted 

vertically on the model. 

Luxury transmitter strap for 

Graupner / iFS systems 


Fits all Graupner iFS 2.4 GHz transmitters 

with supports, or the Graupner transmitter 

tray with iFS transmitter and 

integral Contest supports. The 40 mm 

wide adjustable-length luxury neckstrap 

with two swivelling carabiner hooks and 

extremely soft neck padding make the 

strap as comfortable as possible, even 

when the pilot has to wear it for long 

competition events. The soft neck 

padding is attached using Velcro tape, 

and can easily be removed for cleaning. 

Aluminium- 

transmitter case for mc-22s 

Order No. 10.1 for mc-22S transmitter 

Strong, high-quality, lockable aluminium 

case of attractive design. The shockproof 

foam-padded insert is ideal for 

storing and transporting the transmitter, 

receiver, servos and accessories.

Vox 300 piezo gyro system 


For small model helicopters with rotor 

diameters of up to about 50 cm. 

»Heading-Lock« and »normal« operating 

modes, switchable and variable from 

the transmitter. 

Can also be used without an auxiliary 

channel: in this case »Heading-Lock« 

mode and gyro gain can be set on the 

gyro itself. Integral reverse switch. 

Can be used with all servos 

Specification: 

Operating voltage: 4.2 ... 7 V 

Current drain: 33 mA 

Temperature range: -5°C ... 60°C 

Dimensions: 21 x 22 x 15 mm 

Weight: 8 g 

5960 

5962 

PG420T piezo gyro system 


For all model helicopters with rotor 

diameters of around 1 m or more. 


modes, switchable and variable on the 

gyro itself. Integral reverse switch. 




Dimensions: 31 x 38 x 24.5 mm 

Weight: 21 g 

G750T MSMS gyro system 

Order No 5961 

For all model helicopters with rotor 

diameters of around 1 m or more. 


modes, switchable and variable from 

the transmitter. 

Variable servo travel limiter 

Aluminium case for optimum shielding 

of the sensor, ultra-compact construction 

»Auto-Trim« function for »normal« mode 

and »Heading-Lock« modes. 

Can only be used in conjunction with a 

digital servo or special tail rotor servos 

with high pulse rate. Reverse switch. 




Dimensions: 12 x 27 x 25.5 mm 

Weight: 20 g 

5961 

HyperSpeed-V 

Helicopter speed regulator (governor) 

for internal-combustion motors 


For model helicopters powered by 

internal-combustion motors 

Extremely small and light Speed detected 

by means of three or four magnets at 

the main rotor shaft 

Smooth adoption of rotational speed 

changes 

Stabilised speed sensor operating 

voltage. Programmable throttle servo 

travel 

Battery warning function if receiver 

battery voltage falls below 4.3 V 


Rotor speed range: 1000 ... 2000 rpm 

(3 magnets) 

Rotor speed range: 750 ... 1500 rpm 

(4 magnets) 

Pulse width: 0.9 ms ... 2.1 ms 

Signal resolution: 0.0007 ms 

Dimensions: 15 x 11 x 29 mm 

Weight: 4 g 

Operating voltage: 3 ... 7 V 



161 


BRUSHLESS CONTROL speed controllers 

BRUSHLESS CONTROL speed 

controllers 

Ideal for model aircraft, helicopters, 

cars and boats 

Accessories 

Type 

Order No. 

7231 


BRUSHLESS CONTROL 8 




BRUSHLESS 

CONTROL 8 

7231 

7232 

BRUSHLESS 

CONTROL 18 

7232 





BRUSHLESS 

CONTROL 35 

7233 

BRUSHLESS 

CONTROL 45 

7235 





BRUSHLESS 

CONTROL 60 

7236 

BRUSHLESS 

CONTROL 70 

7237 

Operating voltage range 5,5 ... 15 V 5,5 ... 15 V 5,5 ... 15 V 5,5 ... 25 V 5,5 ... 25 V 5,5 ... 25 V 

Cell count, NiCd, NiMH 6 ... 12 6 ... 12 6 ... 12 6 ... 18 6 ... 18 6 ... 18 

Cell count, LiPo, LiIo 2 ... 4 2 ... 4 2 ... 4 2 ... 6 2 ... 6 2 ... 6 

Cont. current (brushless motors) 8 A 18 A 35 A 45 A 60 A 70 A 

Max. motor current (10 s) 12 A 22 A 40 A 50 A 70 A 80 A 

Temperature cut-off 120°C/125°C 120 °C/125 °C 120 °C/125 °C 120 °C/125 °C 120 °C/125 °C 120 °C/125 °C 

EMF brake programmable programmable programmable programmable programmable programmable 

Reverse mode programmable programmable programmable programmable programmable programmable 

Soft-start programmable programmable programmable programmable programmable programmable 

Low-voltage throttle back programmable programmable programmable programmable programmable programmable 

Power-on signal suppression yes yes yes yes yes yes 

Pulse frequency 32 kHz 32 kHz 32 kHz 32 kHz 32 kHz 32 kHz 

BEC receiver power supply approx. 5,5 V/2 A 5,5 V/2 A 5,5 V/2 A 5,5 V/3 A 5,5 V/3 A 5,5 V/3 A 

Max. BEC current, peak 3 A 3 A 4 A 6 A 6 A 6 A 

OPTO – – – – – – 

Dimensions excl. capacitors approx. 26 x 22,5 x 8 mm 29,5 x 22,5 x 8 mm 37 x 26 x 10 mm 50 x 26 x 11 mm 50 x 26 x 11 mm 50 x 26 x 11 mm 

Dimensions incl. capacitors approx. 34 x 22,5 x 8 mm 39 x 22,5 x 8 mm 49 x 26 x 10 mm 70 x 26 x 11 mm 70 x 26 x 11mm 70 x 26 x 11 mm 

Weight incl. leads approx. 18 g 23 g 41 g 52 g 56 g 60 g 

Connector type BEC BEC G2 G3,5 G2 G3,5 

7233

Functions: 

● Highly efficient, high-power switching 

BEC system 

● SET button for simple programming 

of transmitter travels 

● Programming unit for simple speed 

controller programming 

● Important functions can also be 

programmed using the SET button 

7237 

Programming facilities: 

● Battery type NiCd / NiMH / LiIo / 

LiPo / LiFe 

● Throttle-back voltage 

● Throttle-back, soft / hard 

● Direction of rotation 

● Motor timing 

● Ramp time 

● Start torque 

7235 

7236 

● Brake: on / off 

● Reverse mode for boat / car: on / off 

● Speed governor mode for helicopter: 

on / off 

● Speed adjust rate in governor mode 

● Motor pole count 

● Gearbox reduction ratio 

Accessories 

Order No. 7230 Programming box with 

LCD screen for BRUSHLESS CONTROL 

speed controllers 

Order No. 2894.3 Opto-coupler for GENIUS 

speed controllers and 

BRUSHLESS CONTROL speed controllers 


163 


Speed controllers 

GM-GENIUS Sport 30R 


for 1 : 18 and 1 : 14 model cars and 

boats 

GM-GENIUS Sport 80R 


for 1 : 10 model cars and boats 

● Brushless speed controllers at very 

reasonable prices 

● Simple programming of transmitter 

travels 

● Programming card supplied for 

simple programming of the 

Auxiliary functions: 

● Max. brake power: 0%, 20%, 40%, 

60%, 70%, 80%, 90%, 100% 

● Automatic brake: 0%, 5%, 10%, 

15%, 20%, 25%, 30%, 35% 

● Soft-start: very soft, soft, standard, 

fast, very fast 

● Start power: very soft, soft, standard, 

strong, very strong 

● Max. reverse speed: 0%, 20%, 40%, 

60%, 70%, 80%, 90%, 100% 

● Running mode: forward / brake only, 

forward / brake / reverse, forward / 

safety brake / reverse (default setting), 

forward / brake / reverse after 1 s, 

forward / brake / reverse after 1 s 

with safety brake (the safety brake 

slows the motor until it stops) 

● Motor timing: automatic motor timing, 

soft timing, standard timing, 

high timing 

● Battery management system: 

NiCd / NiMH 4.5 V throttle-back 

voltage, NiCd / NiMH 4.2 V throttleback 

voltage, NiCd / NiMH 3.9 V 

throttle-back voltage, LiPo / LiIo with 

high cut-off voltage 2.9 - 3.2 V, 

LiPo / LiIo with high cut-off voltage 

2.6 - 2.9 V, LiPo / LiIo with high 

cut-off voltage 2.3 - 2.6 V 


7161 

Specification 

7162 

7161 7162 

Operating voltage 6 ... 12V 6 ... 12 V 

Max. continuous current 30 A 80 A 

Dimensions approx 43 x 25,5 x 16 mm 37 x 38,5 x 43 mm 

Weight approx. 35 g 120 g 

Recommended motors: INLINE 330, 380, 400 GM-Brushless Dr. SPEED 

Order No. 6530, 6531, 6541, Order No. 97258 – 97273, 97289, 

6542, 6543 97293 

GM Brushless EVO 3 

Order No. 97231 – 97243 

GRAUPNER BRUSHLESS SPORT 

Order No. 6552, 6553 

GM-GENIUS 95 


● Now with extremely heavy-duty 

capacitor circuit board for extreme 

peak currents and max. acceleration 

● Low-profile construction for extremely 

low Centre of Gravity 

● Sophisticated PCB design and 

extra-thick copper tracks for cooler 

running, plus optimised switching 

profile 

● Sensor-mode and sensorless-mode 

operation possible 

● Fast 16-bit processor and optimised 

software for ultra-high efficiency, 

giving more power and longer 

running times, especially over long 

distances 

● For brushless motors and brushed 

motors 

● Low weight 

● New version available since 

September 2007 

English Champion BRCA 2007 Chris Grainge

German Champion EGTWSC and Vice European Champion 1:12, 

Marc Fischer 

German Junior Champion EGTWSC Yannic Prümer 

2898 

Specification 

Type GM-GENIUS 95 


Operating voltage range 4,8 ... 12V 

Cell count, NiCd, NiMH 4 – 10 

Cell count, LiPo, LiIo 2 – 3 (mode 3) 

Cont. current (brushless motors) 95 A 

Max. motor current (10 s) 190 A 

Temperature cut-off approx. 120 °C 

EMF brake programmable 

Reverse mode programmable 

Soft-start programmable 

Low-voltage throttle-back yes 

Power-on signal suppression yes 

Pulse frequency 8 kHz 

BEC receiver power supply approx. 5,5 V/4 A kurzz. 

Max. BEC dissipated power at 20° C 2,5 W 

OPTO optional 

Dimensions excl. capacitors approx. mm 48 x 31 x 15 mm 

Dimensions incl. capacitors approx. 65 x 33 x 20 mm 

Weight excl. leads approx. 55 g 

Weight incl. leads approx. 95 g 

Connector type G3,5 

German Champion EGTWSC 

English Champion Touring cars modified 

German Champion PRO 10 

2894.L 

2894.13 

2894.16 

2894.35 

Accessories 


2894.L Cooling fan, 30 x 30 mm 

5 ... 6 V for GENIUS speed 

controllers 

.13 Sensor adaptor lead with 

reset switch for GM EVO 2 

motors 

.14 Cable set with G3.5 

connectors for brushless 

motors 

.16 Power capacitor circuit 

board, 7 x 470 μF / 16 V 

.35 Power capacitor circuit board, 

7 x 220 μF / 35 V 

7082.1 Reservoir capacitor for 

Spektrum receiver 


165 


Speed controllers 

COMPACT FLY 15 BEC 6 – 16,8 V 

Order No. 7720 BEC connector 

COMPACT FLY 25 BEC 6 – 16,8 V 

Order No. 7721 G3.5 connector 

● Small, lightweight, particularly 

good value 

● Pre-programmed throttle travels 

● Speed controllers are an excellent 

choice for use with GRAUPNER 

COMPACT and INLINE motors 

● Suitable for NiMH and LiPo batteries, 

throttle-back at around 70% of initial 

voltage 

● High-performance BEC system for 

powering the receiving system 

● Switchable brake 

● Outstanding performance values 

The stated continuous current - 

printed on the label - can be exceeded 

briefly without the motor cutting out. 

● Ultra-fine control characteristics 

● Ideal for aerobatic models and 

Show-Fly models 


Specification 

7720 7721 

Operating voltage range 7,2 ... 14,8 V 7,2 ... 14,8 V 

Cell count, NiMH / NiCd 6 – 12 6 – 12 

Cell count, LiPo / LiIo 2 – 4 2 – 4 

Continuous current 15 A 25 A 

Max. motor current, 10 s 25 A 35 A 

Over-temperature guard, approx. 120 °C 120 °C 

EMF brake programmable programmable 

Soft-start yes yes 

Power-on signal suppression yes yes 

Pulse frequency approx. 12 kHz 12 kHz 

BEC receiver power supply 5 V/2 A kurzz. 2 W 5 V/2 A kurzz. 2 W 

OPTO – – 

Dimensions approx. 44 x 27 x 9 mm 44 x 27 x 12 mm 

Weight incl. leads approx. 19 g 30 g 

Battery connector BEC G3,5 

7721 

7720 

NAVY V15R 


NAVY V30R 


● Reasonably priced 

● Waterproof 

● Pre-programmed transmitter values 

● Full throttle 1.1 ms / Neutral 1.5 ms / 

Reverse 1.8 ms 

● Forward / reverse 

● Powerful BEC 

● High pulse frequency

Specification 

Type NAVY V15R NAVY V30R 

Order No. 2861 2880 

Operating voltage range 6 ... 12 V 6 ... 12 V 

Cell count NiCd, NiMH 10 – 15 5 – 10 

Cell count Pb 3 – 6 3 – 6 

Max. cont. current forward 15 A 30 A 

Max. cont. current reverse 10 A 20 A 

Max. motor current (10s) 30 A 60 A 

Temperature cut-off – – 

EMF brake – – 

Reverse mode yes yes 

Power-on signal suppression yes yes 

Pulse frequency approx. 800 Hz 800 Hz 

BEC 5 V / peak 5 A 5 V / peak 5 A 

Dimensions approx. 39 x 31 x 11mm 69 x 31 x 11 mm 

Weight approx. 43 g 65 g 

Battery connector type JST JST 

2861 

2880 

LiPo deep discharge guard 

for 2 ... 14 cells with Opto-coupler 


The LiPo deep discharge guard reliably 

protects your valuable LiPo battery cells 

from »fatal« deep-discharging. LiPo 

cells tend to differ in voltage, particularly 

in packs containing more than three 

cells, but the speed controller can only 

monitor the overall voltage of the battery 

pack, which can result in the demise 

of the weakest cell if it becomes deepdischarged. 

In contrast, this circuit 

monitors each cell individually, and 

reliably protects them from being discharged 

to an excessive level. 

The unit also transforms any speed 

controller (without reverse mode) into a 

LiPo-capable type. The unit is connected 

to the white multi-pin connector attached 

to the LiPo battery, and automatically 

detects the number of cells in the 

pack; it confirms this by emitting a 

corresponding flashing sequence of the 

LEDs. 

This unit is also connected between the 

receiver and the speed controller. If the 

voltage of any cell falls below a value of 

around 2.7 V or 3 V per cell (switchable 

threshold), the unit shortens the recei- 

ver throttle signal to the point where 

the speed controller throttles back and 

maintains the cell voltage at the minimum 

value of 2.7 V or 3 V. 

The module features jumpers which 

enable it to be used with the BEC 

receiver power supply of BEC controllers. 

A switch is provided for setting the 

throttle-back voltage to 2.7 V or 3 V. 

Specification 

Operating voltage 6 ... 58.8 V 

(2 ... 14 LiPo cells) 

Receiver signal 0.8 ms ... 2.2 ms 

Monitor indicator 2 LEDs 

Throttle-back 

(shortening of 

receiver signal) at a cell 

voltage of approx. 2.7 or 3.0 V 



6496 


167 


Rechargable NiMH batteries 

RTU = Ready to use rechargeable 

NiMH batteries 

● RTU batteries are ready for use 

straight out of the pack 

● Low self-discharge rate: similar to 

Lithium cells 

● After one year of storage the batteries 

still retain around 85% of their chargedin 

capacity 

● An excellent choice for transmitter 

and receiver batteries; also for flashguns 

● Low cost compared with LiPo batteries 

and single-use alkaline batteries 

● Can be fast-charged 

● Recommended Delta-Peak cut-off 

voltage: 5 mV / cell 

Rechargeable NiMH batteries 

Rechargeable batteries for competition 

use, with ultra-low internal resistance. 

These new GMVIS batteries are treated 

with a new GMVIS process which further 

enhances the voltage curve of the cells. 

All MEGA (X, XL, XXL) and .S packs are 

assembled using cells selected using 

a new process specially developed 

for NiMH batteries. The result is more 

accurate measurement, and the 

maximum capacity and voltage curve 

is maintained or even improved. GM- 

Racing charges 2500 mAh into the 

battery cells after the selection process, 

in order to optimise their storage 

capability. 


Order No. 91264 Discharge / selection 

device PT-CTXD2 for NiMH batteries, 

for matching the pack cells before each 

charge process 

Recommended battery chargers 

Order No. 6441 ULTRAMAT 16 and 

Order No. 6444 ULTRA DUO PLUS 50 

East-Power competition batteries: 

● IFMAR World Champion 4-WD 2007 




4NH-800 RX receiver battery 

4.8 V RTU, JR connector 




Intellect receiver battery 

5N-4200 JR 

Order No. 2492.5JR 



NiMH EP 1N-4600 

East-Power single cell 



6 V RTU flat-pack, JR connector 

Order No. 7499.5F 


Dimensions approx. 50 x 49 12 mm 


3+2N-1400 2/3 NiMH BEC 




NiMH EP 6N-4600 JST/G2 

East-Power GMVIS 

Order No. 98941.6ST 


6 V RTU hump-pack, JR connector 




NiMH 1N-800 RTU AAA 

Micro Pack of four 



Dimensions approx. 44 x 10 mm Ø 

NiMH EP MEGA XXL Pack 

EP 6N-4600 GMVIS 

Order No. 98941.6XXL

GP 4600 competition batteries 

● German Champion EGTWSC 2007 



98946 

98946.3I 

98946.4I 

New Intellect battery packs: 

NiMH 6N-1400 2/3A battery, G3.5 

connector Order No. 98868.6G35 



GP 4600 competition batteries 

Capacity 

Ah 

Cell count Voltage 

NiMH 7N-1400 2/3A battery, G3.5 

connector Order No. 98868.7G35 



V 

Order No. Type Weight 

Single cell NiMH IB 1N-4600 

Intellect 



Dimensions approx. Ø 23 x 43 mm 

g approx. 

Accessories 

Dimensions 

mm approx. 

Order No. 91259 Battery box for 1 – 4 

AA, AAA, CR123, stackable 

NiMH IB 6N-4600 JST/G2 

Intellect GMVIS 

Order No. 98947.6ST 

Socket 

Type 

4,6 Ah Single cell 1,2 98946 1N-4600 NiMH GP 72 43 x Ø 23 – 

Single cell 1,2 98946.S 1N-4600 NiMH GMVIS, treated + selec. 72 43 x Ø 23 – 

3 3,6 98946.3I 3N-4600 NiMH GMVIS Inline, soldered 220 137 x 24 G 3,5 

4 4,8 98946.4I 4N-4600 NiMH GMVIS Inline, soldered 290 180 x 24 G 3,5 

4 4,8 98946.4 4N-4600 NiMH GMVIS stick-pack 304 98 x 48 x 24 G 3,5 



6 7,2 98946.6ST 6N-4600 NiMH GMVIS stick-pack 453 142 x 48 x 24 JST/G2 

6 7,2 98946.6X 6N-4600 NiMH Mega X Pack 6 x 72 6 x 43 x Ø 23 

6 7,2 98946.6XL 6N-4600 NiMH Mega XL Pack 6 x 72 6 x 43 x Ø 23 

6 7,2 98946.6XXL 6N-4600 NiMH Mega XXL Pack 6 x 72 6 x 43 x Ø 23 

98946.6ST 

Not shown: NiMH IB MEGA XXL-Pack 6N-4600 GMVIS Order No. 98947.6XXL 


169 

Charging technology

Lithium-Polymer rechargable batteries 

LiPo rechargeable batteries, 25C types 

● Continuous load capacity 25C 

● Up to 90% capacity at maximum load 

● Minimum voltage 2.5 V per cell 

● Very high cycle life at 15C 

● Order No. 7668.x: 

Exceptional performance : weight ratio 

● Extremely high voltage curve 

LiPo rechargeable batteries, 30C types 



● Exceptional performance : weight ratio 




Specification 

Order 

No. 

Type 

designation 

Cell count/ 

Voltage 

V 

Capacity 

mAh 

Max. discharge 

current 

A (peak 10 s) 

Weight 

g 

approx. 

Dimensions 

mm approx. 

Connector 

Suitable Speed Controllers 

7641.3 LiPo 25 C 2100 3/11,1 2100 52,5 (80) 210 31 x 38 x 113 G3,5 GRAUPNER-GENIUS 40, 70, 

COMPACT CONTROL 75S 

7641.4 LiPo 25C 2100 4/14,8 2100 52,5 (80) 280 41 x 35 x 113 G3,5 GRAUPNER-GENIUS 40, 70, 


7647.3 LiPo 25C 3200 3/11,1 3200 80 (125) 330 28 x 47 x 144 G3,5 COMPACT CONTROL 90S 










Specification 

Order 

No. 

Type 

designation 

Cell count/ 

Voltage 

V 

Capacity 

mAh 

Max. discharge 

current 

A (peak 10 s) 

Weight 

g 

approx. 

Dimensions 

mm approx. 

Connector 

Suitable Speed Controllers 

7646.2 LiPo 30C 2500 2/7,4 2500 75 (150) 155 21 x 35 x 105 G3,5 GRAUPNER-GENIUS 70, 


7646.3 LiPo 30C 2500 3/11,1 2500 75 (150) 221 30 x 37 x 105 G3,5 GRAUPNER-GENIUS 70, 


7646.4 LiPo 30C 2500 4/14,8 2500 75 (150) 278 40 x 35 x 105 G3,5 GR-GENIUS 70, CC75S 

7651.3 LiPo 30C 3300 3/11,1 3300 100 (195) 296 24 x 48 x 137 G3,5 COMPACT CONTOL 90S 








7666.5 LiPo 30C 5000 5/18,5 5000 100 (300) 649 47 x 48 x 160 G3,5 COMPACT CONTROL 200S

LiPo rechargeable batteries, 

30C types 



● Exceptional performance: 

weight ratio 



Specification 

Order 

No. 

Type 

designation 

Cell count/ 

Voltage 

V 

Capacity 

mAh 

Max. 

discharge 

current 

A (peak 10 s) 

Weight 

g 

approx. 

Dimensions 

mm 

approx. 

Connector 

Max. conti- Suitable Speed Controllers 

nuousbatterydischarge rate,excl. 

cables and 

connector 

7608.2 LiPo 2/450 2/7,4 450 13,5 (22) 35 11 x 30 x 52 BEC 30C Compact Fly15, CC18 

7608.3 LiPo 3/450 3/11,1 450 13,5 (22) 50 16 x 30 x 52 BEC 30C Compact Fly15, CC18 

7637.2 LiPo 2/1500 2/7,4 1500 45 (75) 105 13 x 33 x 109 G3,5 30C GRAUPNER-GENIUS 40 

7637.3 LiPo 3/1500 2/11,1 1500 45 (75) 150 20 x 33 x 109 G3,5 30C GRAUPNER-GENIUS 40 

7644.2 LiPo 2/2400 2/7,4 2400 72 (100) 14 21 x 33 x 109 G3,5 30C GM-GENIUS 80 

7644.3 LiPo 3/2400 3/11,1 2400 72 (100) 215 32 x 33 x 109 G3,5 30C GM-GENIUS 80 

7654.2 LiPo 2/4000 2/7,4 4000 100 (180) 240 21 x 43 x 154 G3,5 30C COMPACT CONTROL 90S, 








7654.6 LiPo 6/4000 6/22,2 4000 100 (180) 685 59 x 44 x 154 G3,5 30C COM PACT CONTROL 90S, 



171 

Charging technology

Charger / Discharger, Charger accessories 

3065.XH 

3065.PQ 

Balancer adaptors 

Order No. 3065.SET 

Order No. 3065.PQ 

Order No 3065.TP 

Order No 3065.XH 

These balancer adaptors are designed 

to be used with LiPo battery packs fitted 

with different balancer connector 

systems, and are necessary if you use 

the LiPo Balancer 5 plus, Order No. 

3065, and any of the following battery 

chargers: ULTRAMAT 8, ULTRAMAT 16 

and ULTRA DUO PLUS 50. The 

GRAUPNER LiPo Balancer 5 plus and 

6457 


3065.6 

3065.7 

3065.TP 

LiPo Balancer 6 plus can also be used 

with other makes of LiPo battery pack if 

you use the appropriate adaptor. 

Adaptor lead for 3065.RQ/TP/XH 

for 2 - 4 cells 

for the ULTRAMAT 8 


Automatic Turbo-Charger 6 / 12 Pb 


● For 6 V / 12 V lead-acid batteries of 

4 ... 40 Ah capacity 

● Compact battery charger with light 

weight switch-mode PSU for fastcharging 

6 V and 12 V drive batteries 

as well as pit-box and starter batteries 

● Automatic voltage detection and 

charge current setting, range 0.5 ... 3 A 

● LED charge monitor 

red Battery on charge 

green Battery fully charged 

off No battery connected 

Automatic charger 2 / 6 / 12 Pb 


● For 2 V / 6 V / 12 V lead-acid 

batteries of 2 ... 20 Ah capacity 

● Compact battery charger with 

lightweight switch-mode PSU for 

fast-charging 2 V, 6 V and 12 V drive 

batteries as well as pit-box and 

starter batteries 

● Automatic voltage detection and 

charge current setting, range 0.2 to 1 A 

● LED charge monitor 

red Battery on charge 

green Battery fully charged 

off No battery connected 

Specification 

Input 120 ... 240 VAC 

Output 6.5 V / 13 V, 0.5 ... 3 A 

Battery capacity 4 ... 40 Ah 

Temperature range 0 ... 40° C 



Specification 

Input 120 ... 240 V AC 

Output 2.3 V / 6.5 V / 13 V, 

0.2 ...1 A 

Battery capacity 2 ... 20 Ah 

Temperature range 0 ... 40°C 


Weight approx. 182 g

PT-CTXD2 discharge / selection unit 

for NiMH batteries 


● An essential discharger for 

sophisticated maintenance and 

matching of rechargeable NiMH battery 

cells, especially for selected competition 

batteries. Maintains maximum 

performance and durability. The 

batteries should be matched and 

discharged several hours before use, 

as NiMH battery cells stored in the 

fully-charged state exhibit different 

capacities due to their high selfdischarge 

rates. 

● Discharge facility: 5 A linear or 30 A 

pulsed (recommended setting: 5 A 

linear) 

● 1 cell to 6-cell packs can be discharged 

● Discharge cut-off voltage 0.20 ... 1.20 V 

(recommended setting 1.0 ... 1.1 V) 

● The cell voltage and discharged 

capacity of each cell is displayed. 

Specification 

Cell count 1 ... 6 

Discharge current 5 A linear or 30 A 

pulsed 

Final discharge 

voltage 0.0 V in dead 

short mode or 

0.20 ... 1.20 V in 

other modes 

Input voltage 10.0 ... 16.0 V 

Capacity display 0 ... 9990 mAh 



Adaptor plug, GB / DE 

3-pin, 5 A with earth contact 

Order No. 3075.GB3 

Adaptor plug, GB / EU 

2-pin, 3 A, screw-fitting 

Order No. 3075.GB2S 

Adaptor plug, EU / GB / USA 

3075 

Adaptor plug, GB / EU 

2-pin, 3 A 

Order No. 3075.GB2 

Adaptor EU / GB, 3-pin with 

earth contact, 13 A, screw-fitting 

Order No. 3075.GB3S 


173 

Charging technology

Chargers 

ULTRAMAT 8 


● Low-cost computer-controlled allpurpose 

fast charger with integral 

lightweight switch-mode mains PSU 

● Can be connected to 11 ... 15 V car 

battery or 100 ... 240 V AC, and the 

charger is suitable for use with most 

types of battery used in modelling. 

● Integral LiPo balancer 

● Ultra-simple to operate 

● LED charge indicator for NiMH / 

NiCd or LiPo batteries 

● LED indicator for the balancer function 

● Delta-Peak cut-off detector for NiCd 

and NiMH cells 

● Switchable Delta-Peak voltage: 

5 mV, 10 mV, 20 mV per cell 

● Constant current / constant voltage 

charge process for LiPo cells 

● Selectable charge current 

● Attractive design 

Accessories: 

Order No. 6411.4 Adaptor lead for 

3065.PQ/TP/XH Balancer adaptor for 

max. four LiPo cells 

12 V conntector 


230 V conntector, 

peelable 

Specification 

Operating voltage 11 ... 15 V/5 A DC oder 

100 ... 240 V AC mains supply 

Charge facilities 1 ... 10 NiMH-/NiCd cells 

1 ... 4 LiPo cells 

Charge current 0,5 A, 1,5 A oder 3 A (max. 30 W) 


Weight excl. mains lead approx. 430 g 

With integral balancer 

for LiPo cells 

ULTRAMAT 16 


● Lead-acid charge programs with 

optimised charge curve. Discharge 

facility, variable discharge current 

for measuring battery capacity 

and residual capacity 

● Switchable buzzer 

● Language select: English / 

German / French 

● Display of individual cell voltages 

for 2 - 6 cells in NiCd / NiMH / Li 

mode 

● PC mini-USB socket for displaying 

battery curves on a PC 

More features: 

● Low-cost computer-controlled allpurpose 

fast charger 

● With integral lightweight switch-mode 

mains PSU for 100 ... 240 V and 12 

DC input. The charger is therefore 

ideal for use in any location, “on the 

road” and even abroad (USA / Japan). 

● Graupner balancer socket for 1 ... 6 

NiCd / NiMH / LiPo / LiIo / LiFe 

batteries 

● Three different balancer adaptors for 

Polyquest / JST-XH / Thunderpower 

balancer connectors included 

● Automatic charge, discharge, capacity 

measurement, battery maintenance 

and conditioning program for NiMH 

and NiCd batteries as used in modelling 

● Ultra-simple to operate with clearly 

laid-out program structure and four 

buttons 

● Blue backlit high-contrast two-line 

LCD screen simultaneously displays all 

relevant parameters 

230 V connector, 

peelable

● Charge / discharge facility for NiMH, 

NiCd, LiPo, LiIo, LiMn, LiFe or Lead- 

Acid batteries 

● Delta-Peak cut-off detector for NiMH 

and NiCd cells with variable Delta- 

Peak voltage, for reliable charging to 

100% capacity 

● Can charge single cells, therefore ideal 

for glowplug energizer batteries and 

for cell selection 

● Constant current / constant voltage 

charge process for LiPo, LiIo and LiFe 

cells. Declining current curve after final 

charge voltage, with automatic charge 

termination. 

● Protected against short-circuit, 

overload and reverse polarity 

● Switchable safety timer 

● Display of internal battery resistance in 

manual NiMH / NiCd mode 

● Ready for use 

Mini-USB socket 

included 

Three different 

balancer adaptors for 

Polyquest/JST-XH/Thunderpower 

included 

3065.XH 

Technische Daten 

Operating voltage 11 ... 15 V/8,5 A DC or 

100 ... 240 V AC mains voltage 

Charge facilities 1 ... 14 NiMH-/NiCd cells 

1 ... 6 LiPo-/LiIo-/LiMn-/LiFe cells 

1 ... 6 Pb cells 

Charge current 0,1 A ... 8 A with mains operation 

(max. 50 W) 

0,1 A ... 8 A im 12 ... 15 V 

DC operation (80 W) 

Discharge current approx. 0,1 ... 5 A (20 W) 

Balancer socket 1...6 NiMH/NiCd/LiPo/LiIo/LiFe Cells 

Balancer current max. approx. NiMH/NiCd: 0,1A, LiPo/LiIo/LiFe: 0,3 A 



3065.TP 

Integral balaces 

for NiMH/NiCd/ 

LiPo/LiIo/LiFe cells 

3065.PQ 


175 

Charging technology

Chargers 

the multi-talent 

ULTRA DUO PLUS 50 


● Computer-controlled universal fast 

charger 

● With integral lightweight switch-mode 

mains PSU for 100 ... 240 V and 12 

DC inputs. This means that the 

charger is the perfect choice for all 

mobile applications, and also for use 

abroad (USA / Japan). 

● Two equal-value independent or 

dependent (CV-link mode) charge 

outputs 

● Graupner Balancer socket for 2 x 1 ... 

7 NiCd / NiMH / LiPo / LiIo / LiFe cells 

● Fifty memories for storing all essential 

battery parameters 


● Automatic charge, discharge, capacity 

measurement, battery maintenance 

and conditioning programs for all NiMH, 

NiCd, LiPo, LiIo, LiFe batteries used in 

modelling 

● Ultra-simple to operate, with clearly 

arranged program structure, six buttons 

and rotary knob button 

● Two high-contrast LCD screens 

(128 x 62) with blue backlighting: 

21 x 8 characters for displaying all 

relevant parameters or charge / 

discharge curves 

● Charge / discharge facilities for NiMH, 

NiCd, LiPo, LiIo, LiMn, LiFe or Pb 

(lead-acid) batteries 

● Delta-Peak cut-off detector for 

NiMH and NiCd cells with 

variable Delta-Peak voltage, 

ensuring 100% full battery 

charging 

● Capable of charging single cells, 

therefore ideal for glow energizer 

batteries and for cell selection processes 

With integral 

balancer 

for NiMH/NiCd/ 

LiPo/LiIo/LiFe cells

● Charges LiPo, LiIo, LiFe and lead-acid 

cells using constant current / constant 

voltage method. Declining current 

curve after final charge voltage, with 

automatic charge termination. 

● Charge processes: 

NiCd / NiMH: 

● Automatic, normal, linear, GMVIS, 

IMPULSE, REFLEX, RE-PEAK, 

staged charging 

● LiPo / LiIo / LiFe: 

Automatic, CC / CV, CV-link 

Special charge facility for battery storage 

● Balancer program 

● Data memory for comparing all 

important battery data. 

● Lead-acid battery charge programs 

with optimised charge curve, discharge 

facility, variable discharge current for 

determining battery capacity and 

residual capacity. 

● Program for tyre heating covers 

● Order No. 94711 with temperature 

control 

● Motor run-in and test functions for 

brushed electric motors 

● Protected against short-circuit, 

overload and reversed polarity 

Example in use 

6444.6 

● Switchable buzzer, selectable melody 

● Variable safety timer 

● Variable max. charge capacity 

● Selectable language: English / 

German / French / Italian 

● Internal battery resistance display 

● Individual cell voltage display for 

2 x 2 - 7 cells in NiCd / NiMH / Li modes 

● PC-USB interface for displaying battery 

curves on the PC screen 

● Ready to connect 

Accessories 

Order No. 6444.6 Battery holder for up 

to seven sub-C cells with individual 

cell terminals for side-by-side soldered 

battery packs, as generally used in 

competition. Required for balancing 

cells, e.g. Order No. 98947.6XXL 

6444.1 6444.2 

6444.USB 



6444.1 Temperature sensor for 

sub-C batteries, with 

magnet 

.2 Temperature sensor 

without magnet, e.g. for 

tyre heating covers 

.USB Mini-USB / PC-USB 

interface cable 

Specification 

Operating voltage 11 ... 15 V/40 A DC 

or 100 ... 240 V AC mains supply 

Charge capacity per output 1 ... 18 NiMH-/NiCd cells 

1 ... 7 LiPo-/LiIo-/LiMn-/LiFe cells 

1 ... 6, 12 lead-acid cells 

Charge current 2 x 0,1 A ... 10 A with mains PSU 

(total max. 120 W) 

2 x 0.1 A ... 10 A with 11 ... 15 V with 

DC supply (max. 2 x 180 W or 1 x 250 W) 

Discharge current approx. 0,1 ... 10 A (2 x max. 80 W) 

Balancer socket 2 x 1 ... 7 NiMH/NiCd/LiPo/LiIo/LiFe 

cells 

Max. balancer current approx. NiMH/NiCd: 0,1 A, LiPo/LiIo/LiFe: 0,3 A 




177 

Charging technology

Battery chargers 

Battery configuration 

Motor run-in function 

Configuration main menu 

LogView – Shows your serial data ... 

We are collaborating closely with the 

manufacturer of the LogView software 

in order to be able to assess the data 

generated by our ULTRAMAT 16 and 

ULTRA DUO PLUS 50 battery chargers 

as usefully and accurately as possible. 

LogView, which we recommend and 

support, enables the user to visualise 

and analyse the serial data produced 

by our chargers, and - if required - to 

export that data in a wide variety of 

forms. 

The software can be obtained from the 

web address HYPERLINK 

http://www.graupner.de" www.graupner.de 

or HYPERLINK "http://www.logview.info" 

www.logview.info in the form 

of donationware. If you appreciate the 

software, there is a method of sending 

a donation to the developer; if not, the 

software is free to use. 

LogView offers an intuitive user interface 

which is easy to operate, and 

provides a means of analysing data 



Tyre heater main menu 

Data comparison 

from a broad spectrum of different 

devices. The data received from the 

charger (or other device) is always displayed 

on-screen in a uniform manner, 

which generally makes it easier for the 

user to handle his equipment. The files 

generated by LogView can also be 

opened directly by other users, even if 

they do not have direct physical access 

to the device which produced the data. 

Other features of the software include: 

● High-performance graphic engine 

with numerous analytical and 

measuring functions. The view of 

the curves can be adjusted to suit 

particular preferences using the 

wide-ranging program options. 

● Analysis functions enable the user to 

obtain a detailed assessment of 

batteries 

● The curve comparison functions 

make it possible to display different 

charge and discharge processes in a 

single on-screen graph. This is a 

particularly effective means of assessing 

the quality and ageing effects of 

Charge configuration 

Balancer main menu 


a battery by comparing its characteristics 

with other packs. 

● The object management function 

provides a means of assigning 

generated graphs and other information 

to a particular battery, and of storing 

and managing the data in a systematic 

manner. 

● Numerous export functions for 

graphs and tables allow the data to 

be used by other applications. 

● The label printing facility enables the 

user to print out labels to be applied 

to individual battery packs. 

● The integral Help system quickly and 

straightforwardly provides information 

relating to the program’s functions. 

If particular queries arise pertaining 

to the use of the software, or if you 

have suggestions for further 

improvements to LogView, it is 

possible to address the developers 

directly at any time via the LogView 

forum, and also to exchange 

experiences and ideas with other 

users of the software. 

Cycle configuration 

Battery curve (charge)

SPEED-PLUS motors, LEHNER brushless motor 

SPEED PLUS motors 

with integral speed controller, combining 

reliable operation with maximum possible 

operating convenience. 

● LiPo-compatible: two to three LiPo 

cells 

● High-performance BEC receiver 

power supply 

● Strain relief on connecting leads 

● No cables between speed controller 

and motor: increased efficiency, 

saves space and weight 

● EMF brake as standard, for use with 

folding propellers in powered gliders 

● RC system is switched on by 

connecting the flight battery 

Specification 

Type 

Order No. 


7,4 V 

6344 

SPEED 300 PLUS 7,4 V 


Lightweight, ultra-compact motor unit 

For small RC model aircraft such as the 

MINI PIPER, Order No. 6236, CANARY, 

Order No. 9403, and similar models up 

to about 300 g all-up weight. 

SPEED 400 PLUS 7,4 V 


Special power unit for the TERRY S 

model aircraft, Order No. 6297 

Also for similar models up to about 

750 g all-up weight. 160 mm Ø propeller, 

39 mm Ø spinner Supplied complete 

with folding propeller 

6344 


7,4 V 

6091 

Operating voltage range 7,2 ... 11,1 V 7,2 ... 11,1 V 

Cell count, NiMH 6 to 8 6 to 8 

Cell count, LiPo 2 or 3 2 or 3 

No-load speed 12400 min -1 16400 min -1 

No-load current drain approx. 0,5 A 0,7 A 

Operating current approx. 3,5 A 5 A 

Max. motor current, 10 s. 8 A 10 A 

Suitable tractor propeller 1335.12.6 1337.16.8* 

Suitable pusher propeller 1335.13.8L 1335.14.10L 

BEC (receiver power supply) 5 V/1 A 5 V/2 A 

For No. of servos 1 to 3 1 to 5 

Connector type BEC BEC 

Integral electric motor, Order No. 7302 1794 

Free shaft length 12 mm 14 mm 

Shaft diameter 2,0 mm 2,3 mm 

Case length excl. shaft Ø 25 x 40 mm Ø 28 x 48 mm 

Weight complete, approx. 55 g 105 g 

* Propeller included in the set, Order No. 6091 

LEHNER-Brushless-Motor 

Type 1920/5 


Ideal for use in the LEHNER SX-4000 

world record racing boat and other 

Speed models. 

6091 

Specification 

Nominal voltage 7.2 V 

Operating voltage range 6 ... 7.4 V 

No-load speed approx. 46,800 rpm 

Revolutions / Volt (kV) 6500 

Current drain at 

max. efficiency 90 A 

Maximum efficiency 90 % 

Permissible motor 

directions R and L 


Case length excl. shaft approx. 

44 mm 

Diameter approx. 36 mm 

Free shaft length approx. 

16 mm 

Shaft diameter 4 mm 


6544 


179 

Charging technology Electric motors

Elektromotoren 

BRUSHLESS PRO, BRUSHLESS SPORT 

● Lightweight: only around 165 g 

● Reasonably priced 

● Extra-thick multiple windings 

● Sintered neodymium magnets 

● Sensors conforming with IFMAR / 

EFRA / DMC rules 

● EFRA and DMC legal 

● High-performance free-running 

ballraces 

● Sensorless running possible with 

GM-BRUSHLESS speed controllers 

Specification 

Type 

Order No. 

97224 


97286 

GM-RACING 

BRUSHLESS EVO3 

6T delta 

97224 

GM-RACING 

BRUSHLESS PRO 

6T delta 

97286 

GM-RACING 

BRUSHLESS SPORT 

9,5T star 

97289 

GM-RACING 


13,5T star 

97293 

GRAUPN ER 


9,5T star 

6552 

GRAUPNER 


13,5T star 

6553 

Nominal voltage 6 V 6 V 7,2 V 7,2 V 7,2 V 7,2 V 

Operating voltage range 4,8 ... 6 V 4,8 ... 6 V 4,8 ... 7,4 V 4,8 ... 7,4 V 4,8 ... 7,4 V 4,8 ... 7,4 V 

Revs. / Volt (kV) approx. 8800 8800 3600 2730 3800 2600 

Winding count 6Tdelta tri-angular pattern 6Tdelta tri-angular pattern 9,5T delta tri-angular pattern 13,5T delta tri-angular pattern 9,5T delta tri-angular pattern 13,5T delta tri-angular pattern 

Current drain at max. efficiency approx. @ 7.2 V 90 A @ 6 V 90 A @ 6 V 35 20 35 20 

Current drain at max. power approx. @ 7.2 V 150 A @ 6 V 150 A @ 6 V 90 70 90 70 

Max. power at 7.2 V – – 340 W 255 W 340 W 255 W 

Max. power at 6 V 440 W 440 W 255 W 175 W 255 W 175 W 

Max. power at 4.8 V 270 W 270 W 165 W 120 W 165 W 120 W 

Permissible direction of rotation R und L R und L R und L R und L R und L R und L 

No. of poles 2 2 2 2 2 2 

Overall length approx. 70 mm 70 mm 70 mm 70 mm 70 mm 70 mm 

Case length approx. 52,5 mm 52,5 mm 52,5 mm 52,5 mm 52,5 mm 52,5 mm 

Diameter approx. 35,8 mm 35,8 mm 35,8 mm 35,8 mm 35,8 mm 35,8 mm 

Free shaft length approx 15 mm 15 mm 15 mm 15 mm 15 mm 15 mm 

Shaft diameter at output 3,175 mm 3,175 mm 3,175 mm 3,175 mm 3,175 mm 3,175 mm 

Weight approx. 180 g 165 g 165 g 165 g 165 g 165 g 

Recommended reduction ratio with six cells 1:10 model cars 

TW 1:7,0 - 1:10 

Recommended speed controller GM-GENIUS 95 

or 

GM-GENIUS 100 

97289 

1:10 model cars 

TW 1:7,0 - 1:10 

GM-GENIUS 95 

or 

GM-GENIUS 100 


TW 1:4 - 1:6,0 

4 WD 1:7 - 1:10 

GM-GENIUS 50, 

GM-GENIUS 80, 

GM-GENIUS 

SPORT 80R 

97293 

6552 


TW 1:3,5 - 1:6,0 

WD 1:7 - 1:10 

GM-GENIUS 50, 

GM-GENIUS 80, 

GM-GENIUS 

SPORT 80R 


TW 1:4,0 - 1:6,0 

4WD 1:7 - 1:10 

GM-GENIUS 50, 

GM-GENIUS 80, 

GM-GENIUS 

SPORT 80R 

6553 


TW 1:3,5 - 1:6,0 

4WD 1:7 - 1:10 

GM-GENIUS 50, 

GM-GENIUS 80, 

GM-GENIUS 

SPORT 80R

Replacement parts: 


97286.1 Sensor–PCB for BRUSH- 

LESS PRO Delta Wind 

.2 Sintered Magnet 12 mm for 

BRUSHLESS SPORT/PRO 

.3 Sintered Magnet 12,5mm for 

BRUSHLESS SPORT/PRO 

97289.1 Sensor-PCB for BRUSH- 

LESS SPORT Star Wind 

Accessories 


97215.2 Bonded Magnet Ø14 mm für 

BRUSHLESS EVO 3 

.3 Bonded Magnet Ø 13,5 mm 

for BRUSHLESS EVO 3 

97237.1 Sintered Magnet 12,5 mm 

for BRUSHLESS EVO 3 

97243.1 Sintered Magnet 12 mm for 

BRUSHLESS EVO 3 

.2 Sensor unit incl. ballraces for 

BRUSHLESS EVO 3 series 

GRAUPNER INLINE motors 

GRAUPNER INLINE motors 

New GRAUPNER INLINE motors, ideal 

for high-speed model aircraft, speedboats 

and ducted-fan models. 

6549 

7755 

Specification 

Type 

INLINE 370 INLINE 370 INLINE 420i INLINE 560 INLINE 650 

Order No. 

7754 

7755 

6549 

6546 

6548 

Nominal voltage 7,4 V 11,1 V 11,1 V 11,1 V 11,1 V 

Operating voltage range 7,4....11,1V 7,4...14,8V 7,4....14,8V 7,4....14,8V 7,4....14,8V 

No-load speed 37740 43290 38295 19980 22866 

Revs. / Volt (kV) 5100 3900 3450 1800 2060 

Permissible motor direction R and L R and L R and L R and L R and L 

Case length excl. shaft approx. 37 mm 37 mm 42 mm 56 mm 65 mm 

Diameter approx. 28,2 mm 28,2 mm 28 mm 36 mm 36 mm 

Free shaft length approx. 11 mm 11 mm 11 mm 12 mm 12 mm 

Shaft diameter approx. 3,17 mm 3,17 mm 3,17 mm 5 mm 6 mm 

Weight approx. 91 g 91 g 99 g 260 g 455 

Connector type G3,5 G3,5 G3,5 G3,5 G3,5 

Recommended speed controller GRAUPNER 

GENIUS 30 G3,5 

7754 

GRAUPNER 


GRAUPNER 


6548 

6546 

GRAUPNER 


GRAUPNER 



181 

Electric motors

Electric motors 

GRAUPNER COMPACT motors 


New GRAUPNER 

COMPACT »Z« motors. 

Every motor in this series is 

supplied complete with a 

comprehensive accessory pack, as 

shown in the illustration. Each motor is 

also supplied with pre-fitted G3.5 

connectors, enabling the user to 

connect it to a suitable speed controller 

without soldering. 

Specification 

Type 

Order No. 


7744 

COMPACT 215 

7,4 V 

7741 

COMPACT 225 

7,4 V 

7742 

COMPACT 305 

7,4 V 

7733 

COMPACT 400Z 

7,4 V 

7744 

COMPACT 400Z 

11,1 V 

7745 

COMPACT 400Z 

14,8 V 

7746 

COMPACT 460Z 

7,4 V 

7747 

COMPACT 460Z 

11,1 V 

7748 

Nominal voltage 7,4 V 7,4 V 7,4 V 7,4 V 11,1 V 14,8 V 7,4 V 11,1 V 

Operating voltage range 7,4 ... 11,1 V 7,4 ... 11,1 V 7,4 ... 11,1 V 7,4 ... 11,1 V 7,2 ... 14,8 V 7,4 ... 14,8 V 7,4 ... 11,1 V 7,4 ... 14,8 V 

No-load speed 13320 10360 28120 10730 13875 14800 11100 12210 

Revolutions/Volt 1800 1400 3800 1450 1250 1000 1500 1100 

Permissible motor direction R and L R and L R and L R and L R and L R and L R and L R and L 

Case length excl. shaft approx. 21,5 mm 22,5 mm 30,5 mm 40 mm 40 mm 40 mm 46 mm 46 mm 

Diameter approx. 18,2 mm 20,5 mm 28,6 mm 35,2 mm 35,2 mm 35,2 mm 35,2 mm 35,2 mm 

Free shaft length approx. – – 15 mm 18 mm 18 mm 18 mm 18 mm 18mm 

Shaft diameter approx. – – 4 mm 4 mm 4 mm 4 mm 4 mm 4mm 

Weight approx. 18 g 23 g 58 g 136 g 136 g 136 g 160 g 164 g 

LiPo-battery Order No. 7606.2 7606.2 7623.2 7643.2 7637.3 7637.3 7643.2 7637.3 

Recommended propeller** Order No. 2945.16.8 2945.20.11 1361.12.10 1335.28.15** 1336.28.15** 1336.33.18** 1336.30.15** 1336.30.15** 

Thrust in N** 1,1 1,5 3 10 15 16 12,5 17 

Current drain 3,3 A 4,2 A 20 A 30 A 33 A 33 A 40 A 36 A 

Connector – – G3,5 G3,5 G3,5 G3,5 G3,5 G3,5 

Recommended speed controller COMPACT 

FLY 15 

COMPACT 

FLY 15 

GRAUPNER 

GENIUS 30 

G3,5 

GRAUPNER 

GENIUS 30 

G3,5 

* Not for continuous operation; for intermittent use or part-load running. At high operating voltages a smaller propeller must be used.. ** 1N = 100 

7745 

7746 

GRAUPNER COMPACT 400Z 

Order No. 7744 7,4 V 

Order No. 7745 11,1 V 

Order No. 7746 14,8 V 

7747 

7748 

GRAUPNER 

GENIUS 30 

G3,5 

GRAUPNER COMPACT 460Z 

Order No. 7747 7,4 V 

Order No. 7748 11,1 V 

Order No. 7749 14,8 V 

GRAUPNER 

GENIUS 30 

G3,5 

7749 

7770 

GRAUPNER 

GENIUS 40 

G3,5 

GRAUPNER 

GENIUS 40 

G3,5

COMPACT 460Z 

14,8 V 

7749 

COMPACT 365FZ 

7,4 V 

7770 

COMPACT 465Z 

14,8 V 

7772 

COMPACT 565Z 

14,8 V 

7773 

COMPACT 510FZ 

18,5 V 

7774 

COMPACT 610Z 

29,6 V 

7775 

COMPACT 610Z 

37 V 

7776 

COMPACT 640Z 

29,6 V 

7779 

COMPACT 740Z 

37 V 

7780 

COMPACT 920Z 

44,4 V 

7781 

14,8 V 7,4 V 14,8 V 14,8 V 18,5 V 29,6 V 37 V 29,6 V 37 V 44,4 V 

7,4 ... 18,5 V 7,4 ... 11,1 V 7,4 ... 18,5 V 7,2 ... 22,2 V 7,4 ... 22,2 V 11,1 ... 37 V 11,1...44,4 V 11,1...37 V. 11,1...44,4 V 14,8...44,4 V 

13320 6586 8880 8880 7400 11248 9990 7992 7400 7992 

900 890 600 600 400 380 270 270 200 180 

R and L R and L R and L R and L R and L R and L R and L R and L R and L R and L 

46 mm 36,5 mm 46,5 mm 56,5 mm 51 mm 61 mm 61 mm 64 mm 74 mm 92 mm 

35,2 mm 43 mm 43 mm 43 mm 50 mm 50 mm 50 mm 63 mm 63 mm 80 mm 

18mm 20 mm 20 mm 20 mm 21 mm 21 mm 21 25 25 mm 41 mm 

4mm 5 mm 5 mm 5 mm 8mm 8 mm 8mm 10mm 10mm 12 mm 

164 g 134 g 213 g 292 g 308 g 407 g 405 g 644 g 790 g 1708 g 

7643.4 7653.2 7643.4 7643.4 7648.5 2 x 7660.4 2 x 7658.4 2 x 7658.4 2 x 7662.5 4 x 7658.6 

1336.28.15*** 1336.40.25*** 1336.40.25*** 1336.40.25*** 1344.50.32**** 1318.45.15 1318.45.15 1318.50.20 1318.55.20 2960.66.20 

14 13 20 35 32 70 48 75 – – 

26 A 36 A 44 A 70 A 47 A 54 A 29 A 55 A – – 

G3,5 G3,5 G3,5 G3,5 G3,5 G3,5 G3,5 G3,5 G3,5 ohne 

GRAUPNER 

GENIUS 40 

G3,5 

COMPACT 365FZ 7,4 V 


COMPACT 465Z 14,8 V 


7773 

GRAUPNER 

GENIUS 40 

G3,5 

7772 

7774 

GRAUPNER 

GENIUS 70 

7775 



COMPACT 510FZ 18,5 V 


GRAUPNER 

GENIUS 70 

COMPACT 

CONTROL 75S 

COMPACT 610Z 

Order No. 7775 29,6 V 

Order No. 7776 37 V 

7779 

7776 

COMPACT 

CONTROL 75S 

COMPACT 

CONTROL 95S 

COMPACT 

CONTROL 95S 



COMPACT 740Z 37 V 


7780 

COMPACT 

CONTROL 200S 

COMPACT 

CONTROL 200S 


183 

Electric motors

Electric motors 

GRAUPNER COMPACT motors BRUSHLESS 

Dr. SPEED motors 

Included in Order No. 7741 

and 7742 

COMPACT 215 7,4 V 


COMPACT 225 7,4 V 


Ultra-small, high-performance GRAUPNER 

COMPACT motors for Depron model 

aircraft. Supplied with two O-rings for 

propeller mounting. 



Extremely large, high-performance 

GRAUPNER COMPACT motor for RC 

model aircraft with wingspans of around 

2500 mm and larger, such as the TURBO 

Raven; requires a 44.4 V flight battery. 


Included in Order No. 7781 

7741 

7742 

GRAUPNER COMPACT 305 7,4 V 


Very high-revving GRAUPNER 

COMPACT motor, suitable for fast 

model aircraft and model helicopters. 

7781 

7733 

With the new BRUSHLESS Dr. SPEED 

motors GM-Racing has succeeded in 

developing highly efficient motors which 

set new standards in terms of reliability 

and power. 

● Multiple extra-thick windings together 

with extremely low-loss construction 

and sintered neodymium magnets for 

enormous power and high efficiency 

● A thicker shaft ensures more accurate 

true-running of the magnets 

● Cooling openings maintain favourable 

motor temperatures even under 

ultra-harsh competition conditions 

● BRUSHLESS Dr. SPEED motors 

feature sensors and a sensor 

connector, and can therefore be 

operated with GM-Genius speed 

controllers with and without sensors. 

Specification 

Type 

Order No. 

Nominal Voltage 

Operating voltage range 

Revs. / Volt (kV) approx. 

Winding count 

Current drain at max. efficiency approx. @ 7.2 

Current drain at max. power approx. @ 7.2 

Max. power at 7,2 V 

Max. power at 6 V 

Max. power at 4,8 V 

Permissible motor direction 

No. of poles 

Overall length approx. 

Case length approx. 

Diameter approx. 

Free shaft length approx. 

Shaft diameter at output approx. 

Weight approx. 

Recommended reduction ratio with six cells 

Recommended speed controllers

97253 

BRUSHLESS 

Dr. SPEED 

3.5T star 

97253 

BRUSHLESS 

Dr. SPEED 

7T delta 

97257 

BRUSHLESS 

Dr. SPEED 

4.5T star 

97254 

BRUSHLESS 

Dr. SPEED 

8T delta 

97258 

BRUSHLESS 

Dr. SPEED 

9T delta 

97259 

BRUSHLESS 

Dr. SPEED 

5.5T star 

97255 

BRUSHLESS 

Dr. SPEED 

12T delta 

97262 

BRUSHLESS 

Dr. SPEED 

9,5T star 

97266 

BRUSHLESS 

Dr. SPEED 

17T delta, 10.5T star 

97267, 97268 

BRUSHLESS 

Dr. SPEED 

13,5T star 

97272, 97273 

6 V 6 V 7,2 V 7,2 V 7,2 V 7,2 V 7,2 V 7,2 V 7,2 V 7,2 V 

4,8 ... 7,4 V 4,8 ... 7,4 V 4,8 ... 7,4 V 4,8 ... 7,4 V 4,8 ... 7,4 V 4,8 ... 8,4 V 4,8 ... 12 V 4,8 ... 12 V 4,8 ... 12 V 4,8 ... 12 V 

10500 8700 8300 7900 7100 7000 5400 4400 4000 3000 

3.5T 7T 

4.5T 8T 

9T 

5.5T 12T delta 9,5T 

97267: 17T delta 13,5T 

triangular pattern 

triangular pattern triangular pattern 

star winding 97268: 10.5T star star winding 

80 A 80 A 70 A 70 A 65 A 56 A 50 A 35 A 20 A 20 A 

140 A 135 A 135 A 125 A 122 A 104 A 115 A 90 A 60 A 70 A 

524 W 515 W 505 W 480 W 475 W 440 W 450 W 340 W 280 W 280 W 

364 W 375 W 370 W 350 W 340 W 320 W 320 W 235 W 205 W 205 W 

245 W 250 W 240 W 235 W 220 W 210 W 205 W 165 W 140 W 140 W 

R and L R and L R and L R and L R and L R and L R and L R and L R and L R and L 

2 2 2 2 2 2 2 2 2 2 

70 mm 70 mm 70 mm 70 mm 70 mm 70 mm 70 mm 70 mm 70 mm 70 mm 

52,5 mm 52,5 mm 52,5 mm 52,5 mm 52,5 mm 52,5 mm 52,5 mm 52,5 mm 52,5 mm 52,5 mm 


15 mm 15 mm 15 mm 15 mm 15 mm 15 mm 15 mm 15 mm 15 mm 15 mm 


180 g 180 g 180 g 180 g 180 g 180 g 180 g 155 g 180 g 180 g 


TW 1:8,5 – 1:12 

This means that the annoying sensor 

leads can be eliminated for even 

higher reliability 

● Variable sensor timing 

● High-performance ballraces for high 

revolutions 

● The motors comply with DMC rules 

and EFRA rules 

GM-GENIUS 95 

or 

GM-GENIUS 100 


TW 1:8 – 1:13 

GM-GENIUS 95 

or 

GM-GENIUS 100 


TW 1:7 – 1:10 

4 WD 1:13 – 1:15 

97266 


TW 1:7,5 – 1:11WD 

1:12,5 – 1:16 

GM-GENIUS 95 GM-GENIUS 85 

or 

GM-GENIUS 95 

Accessories for all BRUSHLESS car motors 


95200 Special free-running ballrace oil, 15 ml 

95153 Replacement ballrace 

95203 Special high-performance motor ballrace, oiled 

(recommended) 

95206 Ceramic ballrace 

97341 Motor spacer washers, 0.35 mm, for adjusting 

rotor play 

97342 Motor spacer washers, 0.5 mm, for adjusting 

rotor play 

97343 O-ring set, 0.5 mm (4) and 1 mm (4), 

for adjusting rotor play 

2894.4 Sensor adaptor lead for GM-GENIUS speed controller, 10 cm 

2894.8 Sensor adaptor lead for GM-GENIUS speed controller, 20 cm 

2894.9 Sensor adaptor lead, GM EVO2 / Novak motor 

2894.13 Sensor adaptor lead for GM-GENIUS speed controller, 

15 cm, with reset switch 

4467.90 Spiral tubing (1 m) to protect sensor leads 


TW 1:6,5 – 1:9,5 

4WD 1:13 – 1:14,5 

GM-GENIUS 85 

or 

GM-GENIUS 95 


TW 1:6,0 – 1:9,5 2WD, 

Truck 1:12 – 1:13,5 


TW 1:5,0 – 1:7,5 2WD, 

Truck 1:10,5 – 1:13 

GM-GENIUS 80 GM-GENIUS 50, 

GM-GENIUS 80, 

GM-GENIUS 

SPORT 80R 


TW 1:4,0 – 1:6,0 

Off-Road 

1:7,5 – 1:10 

GM-GENIUS 50, 

GM-GENIUS 80, 

GM-GENIUS 

SPORT 80R 

Accessories for electric motors 

Special free-running ballrace oil 


This very low-viscosity ballrace oil is 

extremely resistant to high temperatures, 

and is ideal for all high-performance 

ballraces, especially as used for the 

motor bearings, Order No. 95203. 

Electric motors operating at extreme 

rotational speeds and high temperatures 

are under very high stress, and in these 

circumstances this oil can improve 

overall efficiency by up to 3%. 

The lubricant is also an excellent choice 

for all ballraces in model vehicles. 

High-performance ballraces should be 

oiled regularly, using this oil exclusively. 

The lubricant is supplied in a syringe 

with needle for ease of application. 

Contents approx. 15 ml 


TW 1:4,0 – 1:6,0 

Off Road 1:7,5 – 1:10 

GM-GENIUS 50, 

GM-GENIUS 80, 

GM-GENIUS 

SPORT 80R 


TW 1:3,5 – 1:5,5 

Off Road 

1:6,5 – 1:9 

GM-GENIUS 50, 

GM-GENIUS 80, 

GM-GENIUS 

SPORT 80R 


185 

Electric motors

OS motors 

OS MAX FS -56 



● High-performance four-stroke motor, 

suitable for all types of model aircraft 

● Constant quality, high performance 

and reliability, long useful life 

● Fitted with the 40NA carburettor for 

easy set-up 

● New form of lubricating system 

eliminates the need to deploy vent 

tubes 

● Supplied as standard with a specially 

designed large-volume silencer for 

effective noise reduction 

2729 


OS MAX FS α-56/81 



High-performance four-stroke motor, 

suitable for all types of model aircraft 

● Constant quality, high performance 

and reliability, long useful life 

● Fitted with the 60RA 

carburettor for easy 

set-up 

Specification 

2739 

Motor Order 

No. 

Capacity 

cc 

OS MAX 75 AX 



Twin-ballraced motor offering high performance 

and durability. Ideal for all 

types of model aircraft - especially for 

aerobatic and scale models. 

Power approx. 

Kw (BHP) 

Rotational 

speed approx. 

rpm 

OS SPEED 12 TZ Spec II 



High-performance motor, specially 

developed for race work with 

radio-controlled 1 : 10 scale racing 

cars. The design and construction of 

the motor take into account the 

exacting requirements of the world’s 

most experienced drivers. 

Bore Stroke 

mm 

2726 

Carburettor 

2730 

Shaft thread Weight 

OS MAX 12 TG-P 12D 2737 2,1 0,6 (0,7) at 28000 rpm 5000 ~ 30000 13,8 14,0 12D ¼"-28 UNF 211,3 

OS MAX 12 TG-X 12E 2738 2,1 0,6 (0,7) at 28000 rpm 5000 ~ 30000 13,8 14,0 12E ¼"-28 UNF 251,4 

OS SPEED 12 TZ Spec II 2730 2,1 1,25 (1,7) at 35000 rpm 5000 ~ 44000 13,8 14,0 11 HBS ¼"-28 UNF 208 

OS MAX 21 VG-PES 2747 3,46 1,47 (2,0) at 30000 rpm 3000 ~ 36000 16,6 16,0 12D ¼"-28 UNF 433 

OS MAX 21VG-P X 2748 3,46 1,47 (2,0) at 30000 rpm 3000 ~ 36000 16,6 16,0 12D ¼"-28 UNF 395 

OS MAX 30 VG(P)ES 2731 5,0 2,1 (3,0) at 28000 rpm 4000 ~ 36000 18,5 18,2 21E ¼"-28 UNF 365 

OS MAX FS -56 2729 9,32 0,74 (1,0) at 10000 rpm 2400 ~ 13000 24,0 20,6 40NA ¼"-28 UNF 419 

OS MAX 75 AX 2726 12,29 1,77 (2,4) at 15000 rpm 2000 ~ 16000 25,8 23,5 61A 5/16"-24 UNF 578 

OS MAX FS -81 2739 13,26 0,96 (1,3) at 11000 rpm 2200 ~ 12000 27,7 22,0 60RA ¼"-28 UNF 556 

g

OS MAX 30 VG(P)ES 



With Roto Start Savage Type. 

The motors of the 30 VG(P) series are 

high-performance motors, specially 

designed for race work with radiocontrolled 

1 : 8 scale monster trucks 

and truggies. 

2731 

2738 

OS MAX 12 TG-P 12 D 



Rear-exhaust motor, designed to be 

started using a starter box. 

The motors of the 12 TG series are 

high-performance motors, specially 

designed for race work with radiocontrolled 

1 : 10 scale on-road and 

off-road model cars. 

2737 

OS MAX 12 TG-X 12 E 




started using the integral pull-cord 

starter. 

2748 

OS MAX 21 VG-PES 




started using the integral pull-cord starter. 

For all 1 : 8 scale on-road and off-road 

model cars. 

OS MAX 21 VG-PX 




started using the integral pull-cord starter. 

For all 1 : 8 scale on-road and off-road 

model cars. 

2747 

»Mielke«-SNAP-SYSTEMsilencer 

set, polished 


For 4.5 - 6 cc monster truck and 

truggy motors. Torque-enhancing 

at high revs for maximum power. 


187 

Combustion motors

Accessories for airplane models 

GRAUPNER G-SONIC propellers 

Expanding the existing range. 

Order No. Diameter/Pitch Hub bore 

Ø mm 

cm Inches 

1318.23.20 23/20 9/8 6 

1318.25.15 25/15 10/6 6 

1318.25.18 25/18 10/7 6 

1318.30.15 30/15 12/6 6 


GRAUPNER G-SONIC PRO 

propellers 

New range of propellers, with blade 

shapes identical to the GRAUPNER 

SONIC propellers, but moulded in an 

even more modern plastic material for 

improved stiffness and tensile strength. 

As a result GRAUPNER SONIC PRO 

propellers offer even better efficiency 

and better performance combined with 

lower noise. 


Ø mm 

cm Inches 

1319.40.25 40/25 16/10 8 

1319.40.30 40/30 16/12 8 

1319.40.35 4035 16/14 8 

1319.45.25 45/25 18/10 8 

1319.50.25 50/25 20/10 8 

1319.55.20 55/20 22/8 8 

1319.55.25 55/25 22/10 8

CFK FOLDING PROP 

A new range of CFRP FOLDING 

PROPs with 10 mm blade root thickness 

and 4.1 mm Ø blade pivot bore.Propellers 

fit the spinner, Order No. 6059.8 

Order No. Diameter Pitch 

cm 

cm 

1344.50.32 50 32 

1344.55.32 55 32 

GRAUPNER G-SONIC 

Three-blade propeller 

As an expansion to the existing range, 

new three-blade propellers have been 

developed with a similar blade shape to 

the existing SONIC propellers. 

These props have been developed in 

accordance with the latest findings, and 

their moulds were produced using the 

latest CAD / CAM machines. 

The design and production methods 

guarantee that these propellers exhibit 

superb true-running and tracking. 

1336.13.8L 

CAM FOLDING PROP-pusher propeller blades CAM FOLDING PROP-propeller blades 

Order No. Diameter 

cm 

Pitch 

cm 

They are moulded in the latest plastic 

for maximum possible tensile strength 

and torsional rigidity. 


Ø mm 

cm Inches 

1315.33.25 33/25 13/10 8 

1315.33.30 33/30 13/12 8 

1315.40.25 40/25 16/10 8 

1315.40.30 40/30 16/12 8 

1315.45.30 45/30 18/12 10 

Blade root 

thickness 

mm 

1336.13.8L 13 8 4 1,6 

1336.14.10L 14 10 4 1,6 

1336.14.10L 

Blade root 

bore 

mm 

SLOW FLY PROP 


Order No. Diameter* 

cm 


Ø mm 

cm Inches 

2945.20.7,5 20/7,5 8/3 5,5/4,8 

2945.23.7,5 23/7,5 9/3 5,5/4,8 

Pitch* 

cm 

Blade root 

thickness 

mm 

1336.34.20 34 20 8 3,1 

1336.36.20 36 20 8 3,1 

*applies to propeller hubs with 38 mm hole spacing 


25 x 15 cm for 4 mm Ø motor shafts, 

spinner Ø 45 mm 

Order No. 1341.25.15 


Blade root 

bore 

mm 

189 

Accessories for model-making


Precision spinners 

Extremely elegant precision spinners 

made of aluminium with taper collet 

fixing. Including retaining screws and 

self-locking nuts for CAM FOLDING 

propeller blades. 

Precision spinners with cooling air 

intake 

Ultra-lightweight precision spinners with 

front cooling air intake for optimum 

motor cooling. Including retaining 

screws and self-locking nuts for CAM 

FOLDING propeller blades. 


6055.383 6055.384 6055.454 6055.455 

Order No. Spinner-Ø 

mm 

Overall spinner 

length 

mm 

For motor shaft Ø 

mm 

For blade root 

thickness 

mm 

Hub pivot hole 

spacing 

mm 

6055.383 38 38 3,17 8 45 28 

6055.384 38 38 4,0 8 45 28 

6055.454 45 45 4,0 8 49 37 

6055.455 45 45 5,0 8 49 37 

6055.504 50 50 4,0 8 54 45 

6055.505 50 50 5,0 8 54 45 

6057.383 

6055.504 


6057.504 6057.505 

mm 

6057.384 

Overall spinner 

length 

mm 

6055.505 

For motor shaft Ø 

mm 


thickness 

mm 

Hub pivot hole 

spacing 

mm 

6057.383 38 30 3,17 8 45 22 

6057.384 38 30 4,0 8 45 22 

6057.454 45 34 4,0 8 49 30 

6057.455 45 34 5,0 8 49 30 

6057.504 50 40 4,0 8 54 35 

6057.505 50 40 5,0 8 54 35 

Weight 

6057.454 6057.455 

g approx. 

Weight 

g approx.


mm 

Overall 

spinner length 

mm 

Precision spinners for CAM-, 

respectively CFK FOLDING PROP 

folding propellers 

In addition to our existing range 

For motor 

shaf Ø 

mm 


thickness 

mm 

6045.4 45 43 4 8 6040 

6050.4 50 48 4 8 – 

6050.5 50 48 5 8 – 

6054.31 6054.40 6054.50 6054.60 

Propeller drivers 

Precision-made propeller drivers with taper collet fixing. 

Order No. For Motor shaft 

Ø 

mm 

For propellers 

with hub 

Ømm 

Shaft thread Weight 

6054.31 3,17 4,8 M5 9 g 

6054.40 4,0 6,0 M6 16 g 

6054.50 5,0 8,0 M8 28 g 

6054.60 6,0 8,0 M8 28 g 

Taper collet for 3.17 mm Ø 

motor shafts 


Spinner cap 

alone 

Order No. 

Small parts sets for Depron 

model aircraft 

Order No. 7816.S black 

Order No. 7816.W white 

Injection-moulded parts produced in 

tough ABS material. 

Horns with quick-fit clamp for linkage 

thread. 

With 5 m linkage thread, lightweight 

foam wheels for main and tail undercarriage, 

pre-formed wire pushrods for 

aileron linkage, rubber grommets and 

retaining screws for motor mounting. 

Motor mount for adjustable sidethrust 

and downthrust, tailwheel unit, four 

pulleys for cable linkage. 

The sprue contains the following: single-sided 

horn (2 off), double-sided 

horn (3 off), rudder horn with tailskid 

mount, variable-angle wheel axle (2 off), 

wheel axle fixing (2 off), wheel spat 

fixing (2 off), motor mount (3 off), motor 

mount adaptor for COMPACT 160. 


191 



Screw-fitting wing retainer system 

Order No. 142.4 VE 10 Stück 

For attaching the wing or canopy to the 

fuselage of model aircraft. The nut is 

glued into a suitable mounting plate in 

the fuselage. No tools are required to 

join the parts, as the screws feature a 

cross-piece which provides adequate 

tightening torque when turned by the 

fingers. 

Dimensions: thread M4 x 20 mm 

Magnet latch 


For holding parts in place, such as 

canopies, fuselage hatches, maintenance 

hatches etc. Simple to fit: the parts 

are simply clamped in place. 

Precision balancer 

Order No. 88 

For two-blade, three-blade and fourblade 

propellers with diameters of 300 

to 1000 mm and hub bores of 8.0 / 

10.0, 12.0 and 20 mm diameter. 


Maximum propeller hub thickness: 48 mm. 

This precision balancing device can be 

used to set perfect balance in propellers 

both longitudinally and transversely 

(across the blades). Ultra-simple to 

handle, extremely accurate in use. 

Aero-tow mechanism II 


Strong, reliable aero-tow release, ideal 

for aero-towing, banner-towing etc. 

The mechanism can be built into the 

fuselage turtle deck or the wing. 

Reliable release operation even when 

the cable pulls from one side. 

Power Panel II 


● 12 Volt socket for 

starter, compressor 

or fuel pump. 

● 1.5 V for glowplug with infinitely 

variable heating current 

● Push-button with LEDs for battery 

voltage check 

● Requires a 12 V battery of adequate 

capacity as power supply 

Dimensions: 



Installed depth approx. 20 mm 

Sparkplug 

Order No. 1579.58 

Sparkplug for the G58 petrol engine. 

M10 x 1 mm thread 

Pit-box 


Kit consisting of 8 mm birch plywood 

components. Accurately pre-cut parts. 

Cut-out for POWER PANEL II, Order 

No. 1678, shelf for compressor, Order 

No. 1672, starter, lower compartment 

for battery, drawer for small items, comfortable 

carry-handle. 

Dimensions 


Depth approx. 230 mm 

Height approx. 255 mm

GRAUPNER ducted fan unit 

Order No. 1371.72 

● Ducted fan unit for use in model jets 

● Two mounting lugs 

● Removable air intake ring 

● Simple and quick to install 

● Accessories for mounting motor and 

rotor, including allen wrench 

Specification 

Outside diameter (O.D.) 

approx. 72 mm 

Inside diameter (I.D.) 

approx. 69 mm 

Rotor diameter approx. 68 mm 

Rotor 4 blades 

Stator vane count 4 blades 

Weight 56 g 

Max. motor diameter 

approx. 29 mm 

Shaft diameter approx. 3.175 mm 



6549 GRAUPNER INLINE 420i 

11,1 V/3450 kV 

2896 GENIUS 40 

oder 

2897 GENIUS 70 

Aluminium tricycle retractable undercarriage unit 

Order No. 179 

Top-quality tricycle retract system, CNC-machined from 

heavy-duty aluminium. Single-circuit system, i.e. the wheels 

retract under the action of compressed air, but extend under 

spring pressure. All units lock when retracted and extended. 

Size and format correspond to standard Eurokit retract units. 

Undercarriage pivot pin: 6 mm Ø. Suitable for models with 

take-off weights of up to 15 kg. 

Pack contents: steerable noseleg retract unit, two main 

retract units, control valve, compressed air connectors, air 

reservoir. 

2266.80 

2266.98 

2266.102 

Motor mount 

Order No. 2266.80 For 4 cc to 9 cc 

capacity motors 

Order No. 2266.98 For 9 cc to 15 cc 


Order No. 2266.102 For 15 to 20 cc 


The two motor mount brackets are 

simply positioned on the model’s nose 

bulkhead (firewall), spaced to suit the 

crankcase width, and are secured using 

the fixings supplied. The motor is 

attached to the mount arms using the 

self-tapping screws supplied in the set. 

The mount arms can be shortened if 

required. 

Smoke pump 


This high-performance miniature smoke 

pump is intended for use in model 

aircraftspowered by turbines and internal-combustion 

engines. A small 7.4 V 

(LiPo) or 6-cell NiMH battery is required 

as power supply. An opto-coupler minimises 

potential interference and allows 

an integral electronic switch function to 

be included. The battery can therefore 

be left connected to the smoke pump 

without becoming discharged. 

The working range can be adjusted to 

suit any RC system transmitter using a 

button. 

The smoke pump is of impressively 

high-quality aluminium construction. It 

also features an external socket for use 

with a cut-off valve. 

Set contents: smoke pump, readymade 

Graupner power adaptor with 

green high-current plug, one-way valve, 

instructions. 

Specification 

Power supply 6 ... 8.4 V, typically 

1.5 A 


Dimensions approx. 25 Ø x 52 mm 

174.3 

174,2 

Replacement tyres for undercarriage 

(trailing-link undercarriage legs) 

Order No. 174.2 for main undercarriage, 

1 pair 

Order No. 174.3 for noseleg, 1 unit 

Stable, low-wear lightweight foam tyres 

to fit the wheels of the undercarriage 

legs 174.1 

Hopper-Tank 

Order No. 132 

The hopper tank is a high-quality header 

tank of all-plastic construction, 

suitable for kerosene and petrol-based 

fuels. The tank features a large membrane 

pick-up which ensures a bubblefree 

flow of fuel to jet engines and 

petrol engines. The ultra-fine membrane 

technology filters out even the smallest 

of air bubbles. The hopper tank features 

triple connections for venting and / 

or saddle tanks, refuelling, and feed to 

the pump or engine. Integral high-quality 

Festo fittings for 6 mm hose. 

Set contents: hopper tank including 

Festo connections 

Specification 

Capacity approx. 300 ml 




193 


Model boat accessories 

LEHNER brushless motor 

Typ 1920 »HI-AMP« 


The ideal power plant for use in the 

LEHNER SX-4000 world record boat 

and other high-speed models. 

Outboard motor 

GRAUPNER GTX-820 Brushless 


GRAUPNER GTX-820 Brushless 

Order No. 2380.11 excl. motor and 

water-cooling unit 

Solid aluminium construction. 

Suitable for Formula 1 racing catamarans 

and other medium-sized to large racing 

and sports boats. Power is transmitted 

via a flexible shaft. The shaft inclination 

angle is variable by + 5°, while height 

adjustment of around 12 mm is available. 

The electric motor is cooled by an 

integral water cooling system. Only for 

semi surface-piercing propellers; if a 

fully submerged propeller is used, its 

diameter must be smaller. 

Specification 




Weight incl. motor approx. 600 g 

Motor: INLINE 560 11.1 V, 




6546 E- INLINE 560 11.1 V electric 

motor 

2380.1 Flexible shaft and Teflon sleeve 

2299.39 Three-blade propeller, 39 Ø 


Specification 

Nominal voltage 7.2 V 

Operating voltage range 6 ... 7.4 V 

No-load speed approx. 46,800 rpm 

Revs. / Volt (kV) 6500 

Current drain at 

max. efficiency 90 A 

Maximum efficiency 90% 

Permissible motor direction R and L 


Case length excl. 

shaft approx. 44 mm 

Diameter approx. 36 mm 

Free shaft length approx. 16 mm 

Shaft diameter 4 mm 


2425.1 2425.2 2425.3 

Aluminium boat rudder system 

High-quality rudder systems made of 

aluminium with integral water cooling 

inlet in the rudder blade. 

All the aluminium parts are CNC-machined, 

and stainless steel screws are 

used throughout. 

Specification Order No. 2425.1 Order No. 2425.2 Order No. 2425.3 

Length approx. 70 mm 100 mm 120 mm 

Width approx. 30 mm 34 mm 45 mm 

Height approx. 80 mm 100 mm 125 mm 

Propeller shafts with eloxided aluminium stern tubes 

Hardened, finely ground stainless steel shafts with excellent 

true-running, fitted with 3/16” Ø Drive Dog driver. 

Order No. Shaft-Ø 

mm 

Shaft length 

mm 

398.145.H 4 210 145 

398.180.H 4 225 180 

398.230.H 4 300 230 

398.300.H 4 360 300 

Stern tube 

length mm

Three-blade bronze boat propeller 

Suitable for the SX-4000 racing boat 

Order No. Ø mm Pitch Rotation 

2299.37-3 37 103 right-hand 

Plastic crew figures 

Finely detailed, hand-painted plastic 

figures for model boats generally; ideal 

for multi-function working vessels. 

Drive-Dog driver 


Drive-Dog driver for 4 mm Ø shafts, 

nickel-plated brass, for propellers with 

3/16” centre bore. 

375.16 375.17 

375.18 

375.19 

Developed from original photos supplied 

by the DGzRS (German Sea 

Rescue Association). 

Order No. Description Scale Height approx. 

375.16 Foreman, standing, for bridge 1:20 85 mm 

375.17 Foreman, kneeling, for deck work 1:20 50 mm 

375.18 Foreman, standing, for railing 1:20 85 mm 

375.19 Technician, standing, with binoculars 1:20 85 mm 

Anchor winch 

Order No. 673 50 x 55 x 60 mm 

Kit-form, suitable for the ALTONA 

launch and similar models. 

Ball fenders 

Vacuum-moulded from 1 mm ABS 

sheet. To be cut out, joined and painted 

(pack of 2 each) 

Order No. 2423.20 Ø 20 mm 

Order No. 2423.25 Ø 25 mm 

Order No. 2423.35 Ø 35 mm 

Order No. 2423.40 Ø 40 mm 

2430 

2430.47 

Stainless steel ball bearings 

Twin shields 


2 / 5 mm Ø, thickness 2.5 mm 

Order No. 2430.47 

4 / 7 / 8 Ø, thickness 2.5 mm, flanged 

Order No. 2430.48 

4 / 8 Ø, thickness 3.0 mm 

Cylinder fenders 

Vacuum-moulded from 1 mm ABS 

sheet. To be cut out, joined and painted 

(pack of 2 each) 

Order No. 2424.10 Ø 10 x 55 mm 

Order No. 2424.20 Ø 20 x 80 mm 

Order No. 2424.30 Ø 30 x 100 mm 


2430.48 

195 


Universal accessories 

Model ballast 

Pure tin 

Order No. 3663.50 50 g 

Order No. 3663.100 100 g 

Order No. 3663.2000 2000 g 

For balancing model aircraft and boats. 


Textured sheet 

Vacuum-moulded from 0.5 mm ABS sheet, white. 

Sheet size approx. 490 x 300 mm 

Order No. 740.4 4 x 4 mm pattern 

Two-pack clear lacquer 

Order No. 903 

New two-pack clear lacquer in a spray can, specifically 

developed for modelling applications. This final lacquer produces 

a fuelproof, scratch-resistant surface on models powered by internalcombustion 

engines. It is also an excellent choice for any model 

whose surfaces are particularly susceptible to mechanical damage. 

The hardener is supplied in a supplementary spray container which is 

attached inside the main can, and is injected directly into it when 

required. Suitable for all materials used in modelling. Suitable colour 

paints as base coats: GRAUPNER ACRYLFIX, ALKYFIX (other paint 

types must be tested beforehand). It is important to read and observe 

the notes printed on the spray can! 

Spray can content 400 ml, pot-life around 24 hours. 

When the pot-life has elapsed, any lacquer remaining in the can is 

cured, and cannot be used. 

Textured sheet 

Vacuum-moulded from 0.5 mm ABS sheet, white. 

Sheet size approx. 490 x 300 mm 

Order No. 740.6 6 x 6 mm pattern 

Special free-running ballrace oil 


This very low-viscosity ballrace oil is extremely resistant to 

high temperatures, and is ideal for all high-performance 

ballraces, especially as used for the motor bearings, Order 

No. 95203. Electric motors operating at extreme rotational 

speeds and high temperatures are under very high stress, 

and in these circumstances this oil can improve overall 

efficiency by up to 3%. 

The lubricant is also an excellent choice for all ballraces in 

model vehicles. 

High-performance ballraces should be oiled regularly, using 

this oil exclusively. 

The lubricant is supplied in a squeeze bottle with needle for 

ease of application. Contents approx. 10 ml

Carbon memory sheet 

This carbon fibre memory sheet can be curved (2-D moulding) 

when heated (by heat-gun, oven, etc.); the moulding 

temperature is around 170°C. When cold, the sheet retains 

its new shape, and can be processed mechanically in any 

way; the cooling time is around five minutes. 

The sheet can be cut to size before or after moulding. If the 

components produced in this way are to be glued, we 

recommend our Carbon adhesive, used on the rough face of 

the sheet. 

Order No. 5226.0,5 0,5 mm thick 



Carbon fibre tube 


Fibre content by volume 60% 

approx. 1000 mm long, seamless. 

O.D. 

Ø 

mm 

I.D. 

Ø 

mm 

Wall 

thickness 

mm 

Order No. 

2,0 1,0 1,0 5221.2.1 

10,0 4,0 1,0 5221.10.4 

Carbon adhesive 

Order No. 5226 Contents 25 ml 

Carbon adhesive is a two-pack material 

which produces permanent highstrength 

glued joints between a very 

wide range of materials. The fastsetting 

adhesive is extremely resistant 

to shock and peeling, and can be 

machined in any way once cured. 

Excellent durability. Outstanding features 

of this glue are its resistance to damp 

and solvents. 

Rectangular-section carbon fibre 

strip Expanding the existing range. 

Width 

mm 

Thickness 

approx, 

mm 

Length 

mm 

Carbon fibre sheet 

Order No. 5223.1,5 1.5 mm thick 



Order No. 

10 0,4 1000 5222.10.0,4 

3 0,6 1000 5222.3.0,6 

4 0,6 1000 5222.4.0,6 

5 0,6 1000 5222.5.0,6 

3 0,8 1000 5222.3.0,8 

4 1,0 1000 5222.4.1 

5 1,0 1000 5222.5.1 

10 2,0 1000 5222.10.2 

19 2,0 1000 5222.19.2 

25 3,0 1000 5222.25.3 

15 6,0 1000 5222.15.6 

Carbon fibre rod 


Ø 

Length Order No. 

mm 

mm 

0.5 1000 5220.50 

0,7 1000 5220.70 

3,5 1000 5220.350 

8,0 1000 5220.800 

10,0 1000 5220.1000 

15,0 1000 5220.1600 


197 



12 V Compressor 


This compressor is excellent for filling 

compressed air reservoirs, as used to 

power pneumatic retractable undercarriage 

systems 

Contents: 

needle adaptor, two adaptor nozzles, 

pressure gauge, 320 cm connecting 

lead, 38 cm long hose with positive 

sealing valve. 

Digital scales 

Order No. 87 

Ideal for weighing out epoxy resin and 

hardener or two-pack paints. Backlit 

screen. Features a TARE function for 

resetting the display to ZERO, so that 

you can weigh each component starting 

from zero. 

Measurement range: up to 1000 g 

Accuracy: 0.1 g 

Abmessungen: 

Dimensions: L x W x D: 114 x 76 x 19 mm 


Specification 

Power 12 V/10 A 

Maximum air pressure 17 bar 

Specification 5753.1 5753.2 




Z-bend pliers 


Easy method of making double rightangled 

bends in wire pushrods, for connecting 

to control surface horns and 

Toolbag 



Spacious toolbag made of high-quality 

600 D-polyester with nylon zip closure. 

Convenient design for RC use, with 

generous internal divisions for dry 

batteries, rechargeable batteries, tools, 

starters etc. 

servo output arms. 

The pliers feature a locating pin which is 

inserted in the linkage hole in the servo 

output arm, ensuring that bends are 

produced at exactly the right point. 

Mouse Pad 

Attractive mouse pads for your PC 

mouse, with various illustrations. 

Made from hard PVC film bonded to a 

soft foam base, these mouse pads stay 

“put” very well on your desk. 


Order No. 8279 »BAE HAWK« 

Order No. 8280 »mx-24S« 

Order No. 8281 »ALTONA«

Allen key screwdriver with four inserts 

(1,5; 2,0; 2,5; 3,0) 


Cross-point screwdrivers 

with interchangeable insert 

Order No. 5779.00 PH 00 cross-point 




Cross-point inserts 

for cross-point screwdriver 

Order No. 5780.00 PH cross-point insert 

Order No. 5780.0 PH cross-point insert 

Order No. 5780.1 PH 1 cross-point insert 

Order No. 5780.2 PH 2 cross-point insert 

Allen key screwdrivers 

with interchangeable inserts 

Order No. 5775.0,05 0.05” hexagon 




Order No. 5775.1,5 1.5 mm hexagon 




Order No. 5775.4,0 

Allen key inserts 

for allen key screwdrivers 

4.0 mm hexagon 

Order No. 5776.0,05 0.05” allen key insert 




Order No. 5776.1,5 1.5 mm allen key insert 





Slot-head screwdrivers 


Order No. 5781.2 2.0 mm slot-head 

Order No. 5781.3 3 mm slot-head 



Slot-head inserts 

for slot-head screwdrivers 

Order No. 5782.2 2.0 mm slot-head insert 




Ball-end allen key screwdrivers 







Ball-end allen key inserts 

for ball-end allen key screwdriver 






Box spanners with interchangeable inserts 

Order No. 5783.4,0 4.0 mm box spanner 






Order No. 5783.10 10 mm box spanner 

Box spanner inserts for box spanners 

Order No. 5784.4,0 4.0 mm box spanner insert 






Order No. 5784.10 10 mm box spanner insert 


199 



FlyCamOne 2 


With a weight of only 37 g and a size of 

40 x 80 x 14 mm, the FlyCamOne² is the 

world’s smallest production video camera. 

With 680 x 480 pixels for video recordings, 

and 1240 x 1024 pixels for still 

shots, the camera is capable of fantastic, 

breathtaking in-flight recordings from 

your glider or electric model aircraft, 

power model or helicopter. And why stop 

at modelling? Use it for any sport: jogging, 

skiing, skating, skateboarding, 

biking or simply when you are on holiday; 

wherever you are, you will have tremendous 

fun with the FlyCamOne². 

Available from the Collectionshop. 

● Digital action camera 

● 90° swivel head 

● Microphone 

● LCD information display 

● Movement detector with heat sensor 

● WebCam 

● Video recording at 25 frames per second 

● Endless-loop video recording 

● Still pictures at 1240 x 1024 pixel 

resolution 

● Endless-loop still picture recording at 

three-second intervals: the FCO² takes 

Self-adhesive iFS system stickers 

Order No. 8005.1 white 

Dimensions approx. 15 x 15.5 cm 

Order No. 8005.2 clear 

Dimensions approx. 15 x 10.5 cm 

Order No. 8005.3 large 

Dimensions approx. 30 x 12 cm 


pictures automatically 

● Video monitoring with heat detector 

up to a range of 5 m 

● USB 1.1 port 

● SD card slot (for 2 GB SD card, not 

included in the set) 

● Set contents: USB lead, FCO² baseplate, 

various mounting materials, 

operating instructions 

Specification 

Size 40 x 80 x 14 mm 

Weight 37 g 

Video resolution 640 x 480 pixels 

Still resolution 1280 x 1024 pixels 

Motion sensor range 5 m at 25°C 

LCD screen 2-digit 

Battery 220 mAh Li-Po 

Focus 0.3 m - infinity 

SD card 2 GB (not included 

in the set) 

USB 1.1 Mini USB 

Frames per sec. 25 

Functions Still photo, video + 

audio, WebCam, 

infinite-loop video, 

successive still 

picture, monitor 

video, external 

Chip Drive 

ActionCam ATC 2000 


● Now anyone can record his or 

her own action film! Take your 

ActionCam to the start-line, and film 

everything that comes in front of the 

lens. Whether your model is in the 

air, on water or on land; whether it is 

sunny, raining or snowing: show 

everyone what you can accomplish 

with your ActionCam. Cool action is 

simple to record, and can be played 

back to your friends on a PC or TV set. 

Available from the Collectionshop. 

● Digital action camera, suitable for 

outdoor use 

● Multiple mounting methods, e.g. for 

model aircraft, boats or cars, bicycle 

handlebars, helmet, snowboard, etc. 

(multi-purpose mounting set included) 

● Shock-resistant and waterproof to 

three metres 

● Simple to operate: one button-press, 

and recording starts 

● Approx. one hour recording time at 

best picture quality on separate SD 

card (640 x 480 pixels at 30 frames per 

second) 

● 32 MB internal memory, compatible 

with SD memory cards (max. 2 GB; 

SD card not included) 

● Video recording format: AVI (MJPEG) 

● LCD information display 

● AV output for connection to television 

● USB 1.1 port 

● Compatible with Windows 2000 / XP 

● Battery operation: 2 x 1.5 V AA cells 

(not included in the set) 

● Dimensions of device: approx. 

40 x 40 x 115 mm 

● Weight excl. batteries: 125 g 

● Included in the set: USB lead, AV 

lead, various mounting materials, 

operating instructions 

Promotional 

banners 

These promotional 

banners can be 

used as barriers 

at flying events, 

as track markers 

for car racing 

events, and many other purposes. Size 

of each banner: 340 x 96 cm; made of 

strong, weatherproof foil, with mounting 

eyelets. Printed on both sides. 

Order No. 8324 »Graupner/iFS« 

Order No. 8325 »Graupner-Compact« 

Order No. 8326 »Graupner Jet Power«

Looking back at 2007 

Ideas Expo 2007 

The Ideas Expo was held in Hanover from 

6 to 14 October 2007, and attracted more 

than 160,000 visitors. RB 1000 played 

a major role in the central science show 

every day. The picture shows Christian 

Wulf, Prime Minister of Lower Saxony, 

and Rolf Meyer of the Ideenexpo GmbH 

company. Picture: picture-alliance/ dpa 

For more information contact 

www.ideen-expo.de 

Heli Camp 2007 with LOGO 10 

The first ever Heli Camp was organised at the GRAUPNER works on 

29 - 30 September. Beginners to helicopters were instructed by professionals, 

and shown how to build, set up and optimise an electric model helicopter 

for good flying characteristics using the LOGO 10 as an example. 

www.graupner.de www.heli-camp.de 


JetPower Meeting at Bad Neuenahr 

GRAUPNER had a new stand at the Fair. 

Jet World Masters 2007 in Northern Ireland 

The German Jet Team was very successful at 

this event, and took several awards back home 

with them. The following individual placings 

were achieved: 

1 st place Individual Class and World Champion: 

Stephan Völker 

2 nd place Individual Class Thomas Höchsmann 

4 th place Individual Class Thomas Gleissner 

4 th place Open Class Thomas Singer 

1 st place Team World Championship 

F3B World Championships in Emmen, 

Switzerland 

1 st place, World Champion: Martin Herrig 

2 nd place: Andreas Herrig 

6 th place: Reinhard Liese 

1 st place Team World Championship 

Andreas Herrig, Martin Herrig 

and Reinhard Liese 

Modellflugrecht, Paragrafen 

und mehr 

(Model Aviation Law, Legal 

Requirements and more) 

by Walter Felling, solicitor 

Order No. 8034.02 

This brochure is aimed at model flyers 

and would-be model flyers, and contains 

important registration addresses 

and authority contacts. 

RC-SOCCERBOT 

Exercises / Teacher’s guide book 

Order No. R1001.110 

This book is the complete guide to the 

successful use of the RC SOCCERBOT 

robot in a teaching environment, and is 

the key to becoming properly familiar 

with the machine. 

Starting with the installation of the software 

and moving on through simple 

initial exercises, the guide also covers 

the construction of the robot with the 

help of 3-D CAD drawings. Practice 

units with the completely assembled 

robot are followed by sections covering 

a wide range of expansions. All the 

robot programs accompanying these 

chapters in the book can be downloaded 

at no charge from the website 

Polo-shirt, red 

Sporty polo-shirt made of 100% cotton. 

With embroidered »GRAUPNER 

Modellbau» emblem. 

Order No. 8081.30 Size S 

Order No. 8081.31 Size M 

Order No. 8081.32 Size L 

Order No. 8081.33 Size XL 

Order No. 8081.34 Size XXL 

Graupner pilot’s jacket 

Soft-shell jacket made of 93% 

polyester, 7% elastan. 

The jacket is windproof and weatherproof, 

and features a micro-fleece 

lining, net under-arm inserts and 

various pockets. 

Order No. 8393.1 Size M 

Order No. 8393.2 Size L 

Order No. 8393.3 Size XL 

HYPERLINK "http://www.graupnerrobotics.de" 

www.graupner-robotics.de. 

The complete construction of the robot, 

with animated 3-D CAD support, can 

also be downloaded. 

This model robot can be used for a 

vast range of teaching modules in the 

areas of mechanics, electronics and - 

of course - information technology. 

Whether you wish to tackle design 

tasks, discuss the subject of sensors 

and actuators with your pupils using 

practical examples as an aid, or make a 

start with the programming language 

C++, this robot is the ideal starting 

point for a wide range of challenges 

and tasks. The components which we 

produce are to industrial standards, and 

your pupils will subsequently encounter 

them again in the same form in his or 

her professional life. 

Support your teaching with exciting, 

practical exercises with the robot. 

At HYPERLINK "http://www.graupnerrobotics.de" 

www.graupner-robotics.de 

you can download a compressed 

excerpt from this book in the form of an 

ebook, at no cost. 142 pages in colour, 

bound in book-form 


201

Graupner New Items 2008

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?