ELEMENTAL ANALYSIS 2012 IVA - IVA-Analysentechnik

ELEMENTAL ANALYSIS 

2012 

Type Thermo * 

*The use of instrument name is intended for convenience and does not imply that the products are of 

instrument manufacturer origin. 

Your partner worldwide for products for analysis 

IVA 

Analysentechnik e.K. +49 (0) 21 59 / 69 42 - 0 

Ingenieur- und Vertriebsbüro für Analysentechnik +49 (0) 21 59 / 69 42 - 10 

Alte Seilerei, Haus 5 

Meerbuscher Str. 64-78 info@iva-analysentechnik.de 

40670 Meerbusch, Germany www.iva-analysentechnik.de

Revision 01/2012 

How to place your order 

We are happy to accept your order by phone, fax, e-mail or post. 

Our Address: IVA Analysentechnik e. K. 

Alte Seilerei, Haus 5 

Meerbuscher Str. 64-78 

40670 Meerbusch, Germany 

Phone: +49 (0) 21 59 / 69 42 - 0 

Fax: +49 (0) 21 59 / 69 42 - 10 

E-Mail: info@iva-analysentechnik.de 

Internet: www.iva-analysentechnik.de 

Prices: The prices are net additional freight costs. 

Delivery Terms: Ex works Meerbusch / Germany 

Payment Terms: 30 days net after receiving the invoice. 

Minimum Order Size: We welcome all orders, whether large or small, and 

therefore we do not have a minimum order requirement. 

Quantity Discounts: Many items can be discounted when purchased in 

quantities. Please contact us with your requirements. 

The purchaser is responsible for all local taxes. 

We offer technical support and spare parts for elemental analyzer and 

autosampler. If you are interested, please feel free to contact us. 

We offer additional parts from THERMO* 

VICI* 

SGE 

B.E.S.T. FITTINGS / SWAGELOK* 

UPCHURCH SCIENTIFIC*

NEW: MAS200R upgrade to 250 samples 

(5 drums)

ZEROBLANK-Autosampler 

The new Zero-Blank Revolver from Blisotec is the most innovative solution for 

sample introduction in EA and EA-MS measurement systems. 

The autosampler can be integrated in Thermo Flash EA and offers a wide range of 

sample carousels. 

Available configurations: 

60 Samples with a maximum diameter of 13 mm 



Custom designed carousels are also available. 

The integrated stepper motor makes switching between different carousels 

possible and offers the user a great deal of flexibility. 

The two stage purging system allows a “zero-blank” sample introduction 

without any additional time loss. The duration of the purge cycle is defined by the 

length of a single sample acquisition multiplied by two. 

In the first stage the sample is roughly purged for one acquisition period. In the 

second stage the sample is enclosed in a low volume chamber and purged for 

another acquisition period, freeing the sample from the last traces of atmospheric 

nitrogen. 

Example: 

A single measurement of N and C can be usually done in 6-7 minutes, 

which means that the next sample will be purged with helium for about 12-14 

minutes, and then introduced to the reactor. This solution gives the user an easy 

control mechanism over the whole process. 

For more information, please feel free to contact us.

Toggle press with form tool for pellets 

(recommendable by using glass fiber filter)

NEW CHROMIUM OXIDE 

Physical Characteristics and Performance of new Chromium Oxide 

Chromium oxide (Cr2O3) is a powerful catalyst used for the oxidation of 

organic compounds in elemental analysis in order to convert the samples’ 

components completely into the oxidized states such as carbon dioxide (CO2), 

nitrous oxides (NOx) and water. 

The best performance of this catalyst is obtained at temperatures of about 

1000°C in quartz tubes. At this temperature no other devices or materials are stable 

and constant over the time. 

At such high temperatures, impurities in the chromium oxide such as alkaline 

compounds may interact with the silicon in quartz tube after over time forming a 

complex with causes cracks and holes. This can eventually result in breaking of the 

tube when cooling. Figure 1 shows a Scanning Electron Microscopy (SEM) photo of 

a quartz tube with silicate deposit. Holes and cracks on the glass surface, which 

reduce the thickness of the glass walls, are detected. 

Deposit of silicated 

compound 

Deposit of silicated 

compound 

Deposit of 

silicated 

compounds 

Quartz surface 

Fig. 1: Scanning Electron Microscopy (SEM) of the deposit created 

on the internal surface of the quartz tube after 250 runs.

This quartz degradation is accelerated by alkaline impurities present in the 

catalyst. Even very low amounts of these impurities reduce the live-time of the tube 

drastically. This adverse reaction was not detected during the analytical runs of the 

new product. 

The good quality of the catalyst was evaluated with a large number of 

analyses. The chrome oxide region of the quartz tube was carefully observed and 

compared to the degradation and the internal thickness of the silicate deposits with 

different catalysts present on the consumable market. 

The tests were performed on the New Chrome Oxide after analyses of 

acetanilide samples. After 40, 150 and 250 runs the quartz tube was removed from 

the furnace. Visual aspects and glass porosity were observed and documented. In 

the following figures photos of the same quartz tube, after 40, 150 and 250 tests, are 

reported. 

Fig. 2: Quartz tube with new Cr2O3 after 40 runs 

Fig. 3: Quartz tube with new Cr2O3 after 150 runs

Fig. 4: Quartz tube with new Cr2O3 after 250 runs 

The glass wall shows normal degradation. Even after 250 runs the tube 

remains re-usable. No fissures, cracks or holes are observed. Figure 5 shows a tube 

filled with the new Cr2O3 compared to a tube containing the normal Cr2O3 catalyst 

after 250 analyses carried out under the same conditions with the same equipment. It 

is clearly visible that the tube with the new catalyst (top) is still re-usable while the 

other one presents several cracks and is likely to break when heated and cooled 

again. 

New Cr2O3 

Normal Cr2O3 

Fig. 5: Quartz tubes with new and normal Cr2O3 after 250 runs

Content 

1 COPPER REAGENTS.......................................................................................... 1 

2 CATALYSTS and ADDITIVES.............................................................................. 2 

3 GAS CHROMATOGRAPHIC COLUMNS............................................................. 4 

4 REACTORS and SEALS ...................................................................................... 5 

4.1 Type EA 1106 .............................................................................................. 5 

4.2 Type NA 1500 Series 1 ................................................................................ 6 

4.3 Type NA 1500 Series 2 / NA 2000 / NA 2500 / EA 1108 and EA 1110 ........ 7 

4.4 Type Flash EA1112 / EA1112HT / 2000 / 4000 ........................................... 9 

5 TC / EA............................................................................................................... 11 

6 WATER / CARBON DIOXIDE TRAPS............................................................... 13 

7 SCRUBBER TUBE ASSEMBLY DETAILS......................................................... 14 

8 GAS FITTING SYSTEMS (2 mm, 1/16” etc.)...................................................... 15 

9 CHART PAPER.................................................................................................. 16 

10 CERTIFIED ORGANIC / ANORGANIC STANDARDS................................... 17 

11 SOIL STANDARDS / SEDIMENTS................................................................ 21 

12 ISOTOPE STANDARDS................................................................................ 22 

12.1 Certified isotope standards......................................................................... 22 

12.1.1 Natural reference materials................................................................. 22 

12.1.2 Water standards.................................................................................. 23 

12.2 Working isotope standards......................................................................... 23 

13 SPARE PARTS.............................................................................................. 24 

14 FERRULES and FITTINGS ........................................................................... 32 

15 PRESS FITS (desactivated) .......................................................................... 37 

16 RETENTION GAPS (Fused Silica) ................................................................ 38 

17 Special items GCC / GCTC / Kiel / GasBench / Delta.................................... 39 

18 GC SEPTA for LIQUID INJECTOR................................................................ 41 

19 SYRINGES .................................................................................................... 42

20 VIALS, CAPS and SEALS 43 

20.1 GASBENCH: Labco Vials and caps / Exetainer® ...................................... 43 

20.2 Autosampler CTC / AS 2000 / AS3000 / TriPlus ........................................ 50 

21 CRIMPERS and DECAPPERS...................................................................... 55 

22 CALIBRATED MICROPIPETTES .................................................................. 56 

23 MICRO SPATULA / FORCEPS ..................................................................... 57 

24 SEALING DEVICES...................................................................................... 58 

24.1 For solids.................................................................................................... 58 

24.2 For liquids................................................................................................... 58 

25 CAPSULES.................................................................................................... 59 

25.1 Pressed Capsules ...................................................................................... 59 

25.1.1 Tin capsules for solids......................................................................... 59 

25.1.2 Tin foils................................................................................................ 60 

25.1.3 Tin discs.............................................................................................. 60 

25.1.4 Silver capsules for solids..................................................................... 61 

25.1.5 Aluminium capsules for solids............................................................. 62 

25.1.6 Store box for capsules ........................................................................ 62 

25.2 Smooth Wall Capsules............................................................................... 63 

25.2.1 Tin capsules for liquids........................................................................ 63 

25.2.2 Silver capsules for liquids.................................................................... 64 

25.3 Boats.......................................................................................................... 65 

25.3.1 Tin boats ............................................................................................. 65 

25.3.2 Silver boats ......................................................................................... 65

Part No. Ref. 

Code 

*This is a protected name and only for identification. 

1 COPPER REAGENTS 

Description Unit 

SA99060100 33821710 Copper oxide Ø 0,7 mm 1 kg 

SA99060101 33821710 Copper oxide Ø 0,7 mm 100 g 

SA99060101B 33821710 Copper oxide Ø 0,7 mm 50 g 

SA99060102 33835300 Copper wires Ø 0,7 mm, reduced, ampoule 2 x 50 g 

SA99060103 33835300 Copper wires Ø 0,7 mm, reduced glass-bottle 250 g 

SA99060204 33835310 

Copper wires Ø 0,7 mm, reduced„ultra pure“ 

for sulphur analysis, ampoule 

40 g 

SA99060301 --- Copper oxide, Ø 0,5 mm 100 g 

SA99060302-B --- Copper wires Ø 0,5 mm, reduced, ampoule 100 g 

SA99060302 --- Copper wires Ø 0,5 mm, reduced glass-bottle 100 g 

SA99060303 --- Copper wires Ø 0,5 mm, reduced glass-bottle 250 g 

SA99060304 --- Copper reduced, very fine, glass bottle 100 g 

SA33835311 33835311 

Electrolytic copper for Flash EA 1112 and 

EA1108/EA1110/NA1500/NA2000 (long wire) 

90 g 

SA33835311B 33835311 Electrolytic copper for Flash EA 1112(long wire) 70 g 

SA33835305 33835305 High Quality Copper for Flash 4000 220 g 

IVA33835312 33835312 High Quality Copper for Flash 50 g 

SA33835335 33835312 High Quality Copper for Flash 250 g 

Fig. 1: Copper reduced with different dimensions 

1 / 65


2 CATALYSTS and ADDITIVES 

Part No. Ref. Code Description Unit 

IVA1091830 1091830 

Platinum Catalyst for hydrogen 

determination 

50 pc. 

SA33800115 33800115 Glucose Anhydride 100 g 

SA33835400 33835400 Koeberl Catalyst absorbent 5 g 

SA990610 33822900 Chromium oxide, granular 25 g 

SA990610B 33822900 Chromium oxide, granular 50 g 

SA990700 33822800 Cobaltous oxide, granular 25 g 

SA990630 33824500 Silvered cobaltous oxide 25 g 

SA990702 33824600 Tungsten oxide 25 g 

SA990620 33835420 Tungsten oxide on Alumina 25 g 

SA990701 33823800 Nickel plated carbon 2 x 2,5 g 

SA990708 33840000 Oxidation catalyst 40 g 

SA990708C 33840000 Oxidation catalyst 60 g 

SA990709 33837510 Vanadiumpentoxide 1 g 

SA990710 33822000 Carbon dioxide adsorbent 100 g 

SA990711 33837540 Lead oxide, red 1 g 

SA990712 33821900 Magnesiumperchlorate 100 g 

SA990712B 33821900 Magnesiumperchlorate with indicator 100 g 

IVA100543 --- Sicapent with indicator 10 g 

SA33840035 33840035 Silica Gel with indicator 100 g 

IVA33822000 33822000 Ascarit 100 g 

SA990713 33801801 

Molecular Sieve 3A, pellets, gas purifycation 

(Mol.sieve 4A und 5A available o.r.) 

SA990714 33825000 Nickel wool 2 g 

Fig.2: Nickel Wool 

100 g 

2 / 65


2. CATALYSTS and ADDITIVES 


SA990715 33822300 Quartz chips 100 g 

SA990715B 33822300 Quartz chips 50 g 

SA990716 33822200 Quartz wool, very fine (can) 5 g 

SA990716-5 33822200 Quartz wool, very fine (can) 5 x 5 g 

SA990716-A 33822205 Quartz wool, very fine (bag) 10 g 

IVA33822200-25 33822200 Quartz wool, very fine (bag) 25 g 

IVA3381250 --- Quartz pads, d=15 mm 25 pc. 

IVA3382151 --- Quartz pads, d=16,5 mm 25 pc. 

Things that make life easier! 

Fig. 3: Quartz pads with different diameter 

SA990717 33835235 Soda lime 100 g 

SA990717B 33835230 Soda lime 200 g 

SA33840030 33840030 Adsorber for fluorine compounds CHN, NC und N 25 g 

IVA33807912 --- 

Adsorber (Sulfix) for halogene and sulphur 

compounds CN 

SA990784 33837530 Chromosorb, 30-60 mesh 10 g 

SA33837530 33837530 Chromosorb WAW, 30-60 mesh 25 g 

Fig. 4: Silver wool 2 g and 10 g 

SA33839055 33839055 Platinum supported on Alumina 100 g 

SA990786B 1117430 Silver wool, fine 2 g 

SA990786 1117430 Silver wool, fine 

SA990786-C 1117430 Silver wool, fine 50 g 

SA999931 33406200 Nickel sheet liner 130 x 130 mm 1 pc. 

25 g 

10 g 

3 / 65

3 GAS CHROMATOGRAPHIC COLUMNS 


SA990720 26008206 

Separation column, N2-CO2-H2O-SO2 

stainless steel, 2 m 

1 pc. 

SA26008208 26008208 

Separation column, N2-CO2-H2O-SO2, PTFE, 

2 m 

1 pc. 

SA990721 26008200 Separation column, N2-CO2-H2O, SS, 2 m 1 pc. 

SA26008207 26008207 Separation column, N2-CO2-H2O, PTFE, 2 m 1 pc. 

SA990722 26008205 

Separation column, N2-CO2, stainless steel, 

3 m 

1 pc. 

SA990723 26007800 Separation column, SO2, PTFE, 0.8 m 1 pc. 

IVA990723SO 26007910 Separation column, SO2, PTFE, 1 m 1 pc. 

SA990724 26007900 Separation column, O2, stainless steel, 1 m 1 pc. 

SA26007820 26007820 

Separation column, N2, PTFE, for Flash EA, 

0,5 m 

1 pc. 


Separation column for Protein Determination, 

PTFE, 1 m 

1 pc. 


Multiseparation CHN column stainless steel 

for Flash EA, 2 m 

1 pc. 

SA26008215 26008215 

Separation column CHNS, PTFE for Flash 

EA, 2m, 6x5 

1 pc 

SA26008245 26008245 Packed column CHN, SS, 4 m 1 pc. 

IVA26070500HS --- 

Packed Column CN-IRMS, 0.6 m 

Conditioned and tested 

1 pc. 


Column PoraPlot Q, 25 m, 0.32mm ID for 

Gasbench 

Packed Column for TC/EA, SS4 mm ID, ¼” 

1 pc. 

IVA1121030 1121030 AD, 2 feet Filling: Molecular sieve 5 A, 80 – 

100 mesh, Length 2 feet (0.6 m) 

1 pc. 


Fig. 5: Column, PTFE and stainless steel 

4 / 65


4 REACTORS and SEALS 

450 mm 

4.1 Type EA 1106 

10,5 mm 

10,5 mm 

10,5 mm 10,0 mm 

Fig. 6: SA990725 Fig. 7: SA990726 


SA990725 46800900 Empty quartz reactor with taper 

transparent, length 450 mm 

(figure 6) 

SA990726 46801000 U-Quartz reactor, transparent 

(figure 7) 

310 mm 

5 pc. 

2 pc. 

IVA46801000SS --- U-Tube, Stainless Steel 1 pc. 

SA990727 29030331 Viton O-ring, 11 mm, top 5 pc. 

SA990728 29050567 Viton O-ring, 6 mm, bottom 10 pc. 

SA999934 46802001 Prepacked reactor, for CHN - determination 

(Cr2O3/Co3O4 silvered) 

1 pc. 

5 / 65


4. REACTORS and SEALS 

4.2 Type NA 1500 Series 1 

Fig. 8: SA990735 

460 

Fig. 9: SA990736 

Fig.10: SA990732 


SA990735 46801600 Empty quartz reactor with taper 

transparent, length 460 mm 

(figure 8) 

SA990736 46801700 Quartz insert, translucent 

length 220 mm (figure 9) 

2 pc. 

5 pc. 

SA990728 29050567 Viton O-ring, 6 mm, bottom 10 pc. 

SA990732 29032910 Viton O-ring, 18-20 mm chamfered 

square profile, top (figure 10) 

SA999928 --- Prepacked reactor, transparent 

for CHN - determination 


10 pc. 

1 pc. 

6 / 65



4.3 Type NA 1500 Series 2 / NA 2000 / NA 2500 / EA 1108 and 

EA 1110 

450 mm 

18 mm 

Fig. 11: SA990729 Fig.12: SA990733 

Tungsten Wolframoxid Oxide (auf 

SA990702 Aluminiumoxid) 

Electrolytic Copper, long wire 

SA33835311 

Kupfer reduziert 

zur Schwefelanalyse 

(Drahtform lang) 


SA990729 46820000 Empty quartz reactor, transparent 

length 450 mm, OD 18 mm (figure 11) 

IVA12-180 --- Quartz insert with slots 

length 215 mm, OD 12 mm 

IVA46820006 46820006 Empty quartz reactor with taper 

transparent, OD 18 mm, ID 15 mm 

SA990730-T --- Quartz insert, transparent 

length 215 mm, OD 12 mm 

2 pc. 

1 pc. 

2 pc. 

5 pc. 

SA990731 46820010 Quartz reactor, translucent, OD 18 mm 2 pc. 

SA990732 29032910 Viton O-ring, 18-20 mm, chamfered 

square profile (figure 10) 

SA990733 46802005 Prepacked reactor, transparent, for 

NCS - / CHNS – determination 

(WO3/electrolytic Copper) (figure 12) 

10 pc. 

1 pc. 

7 / 65



4.3 Type NA 1500 Series 2 / NA 2000 / NA 2500 / EA 1108 / EA 1110 


SA999927 46820012 Prepacked reactor, translucent 

for NC - / CHN – determination 


SA999939 46820012 Prepacked reactor, transparent 

for NC - / CHN – determination 


SA999932 --- Prepacked reactor for 

NC - / CHN – determination (CuO/Co3O4 silvered) 

1 pc. 

1 pc. 

1 pc. 

IVA46820060 --- Prepacked Reduction tube (Cu red.) 1 pc. 

IVA46820050 46820050 Stainless steel reactor, special alloyed 

OD 18 mm (figure 13) 

IVA25205000 25205000 Stainless steel insert, special alloyed 

OD 13 mm for stainless steel reactor 

IVA46820050 (figure 13) 

IVA25205000R --- Stainless steel insert, special alloyed, for 

stainless steel reactor IVA46820050, reusable 

(figure 13) 

IVA25205000R-Al --- Stainless steel insert, special alloyed 

for quartz reactor with ID 15 mm, reusable 

(not usable for isotopes) 

IVA46820051 46820051 Prepacked stainless steel reactor for NA 2000 

and NA 2500 (Proteincatalyst) 

SA990730-T-MOD --- Quartz-Insert, transparent, L = 215 OD 

13,0 mm, ID 11 mm 

Fig. 13: Stainless steel tube (IVA46820050) and insert (IVA25205000) 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

8 / 65

SA999939-C 

IVA46802007 

SA999939-B 



4.4 Type Flash EA1112 / EA1112HT / 2000 / 4000 

Fig. 14: Prepacked reactors and quartz inserts 


IVA46820070 46820070 Empty quartz reactor, one side conical 

L 450 mm, OD 18 mm (EA1112) 


MOD215/4 


MOD227/4 


MOD210/11 

--- Quartz insert, 4 slots top, 4 slots bottom 

length 215 mm, OD 12,5 mm 

--- Quartz insert, 4 slots top, 4 slots bottom 

L 227 mm, OD 12,5 mm 

2 pc. 

1 pc. 

1 pc. 

25204510 Quartz insert 11 slots, L 210 mm, OD 13 mm 1 pc. 

IVA4681210 4681210 Quartz insert 11 slots, L 227 mm, OD 12 mm 1 pc. 


MOD230/11 

--- Quartz insert 11 slots, L 230 mm, OD 13 mm 1 pc. 

SA25205001 25205001 Inconel Crucible 13 mm with slots 1 pc. 

IVA29020640 29020640 Viton O-ring, bottom 

for reactor with OD 18 mm 

IVA29022910 29022910 Viton O-ring, top, 18-20 mm, chamfered square 

profile, for reactor with OD 18 mm (fig. 10) 

5 pc. 

5 pc. 

SA29000051 29000051 O-Ring lubricant for Flash 4000 1 pc. 

SA999939-B --- Prepacked reactor CHN - determination 

(EA1112), (Cr2O3/Co3O4 silvered), transparent 

SA999939-C --- Prepacked reactor CHN - determination 

(EA1112), (CuO/Co3O4 silvered) 

SA999939-D 46802015 Prepacked reactor CHNS - determination 

(EA1112), (CuO/electrolytic copper) 

IVA46802007 46802007 Prepacked reactor CHNS – determination 

(EA1112), (WO3/electrolytic copper) 


IVA4681210MOD227/4 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

9 / 65



4.4 Type Flash EA1112 / EA1112HT / 2000 / 4000 


SA999977 --- Prepacked tube (Flash EA1112), Chromiumoxide/high 

purity reduced copper /Silvered 

cobaltous oxide 

IVA46820050 46820050 Stainless steel reactor, special alloyed 

OD 18 mm (figure 13) 

IVA25205000 25205000 Stainless steel insert special alloyed 

OD 13 mm for stainless steel reactor 

IVA46820050 (figure 13) 

IVA25205000R --- Stainless steel insert with slots, special alloyed, 

for stainless steel reactor IVA46820050, 

reusable 

IVA46820075 46820075 HPAR reactor, special alloyed 

OD 25 mm for NC - filter / soils / sediments - 

determination 

IVA25205010 25205011 HPAR crucible for HPAR reactor IVA46820075, 

reusable (figure 15), slits 

IVA25205011B 25205011 HPAR crucible for HPAR reactor 25 mm, 

less slits 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

IVA29020649 29020649 O-ring, bottom, for reactor with OD 25 mm 5 pc. 

IVA29020682 29020682 O-ring, top, for reactor with OD 25 mm 5 pc. 

IVA46802008 46802008 Prepacked HPAR reactor, OD 18 mm (with 

Proteincatalyst) 

Fig. 15: HPAR crucible 

1 pc. 

10 / 65


5 TC / EA 

Incl. FlashEA1112 HT parts for O and H configurations: 

Part No. Ref. 

Code 


IVA127356 1121310 Glassy carbon reactor, OD 12 mm, ID 7 mm, 

L= 356 mm 

1 pc. 

IVA12786355 --- Glassy carbon reactor, OD 12 mm, ID 7 mm, 

L= 355 mm, suitable for BFA, 

IVA1121310A --- Glassy carbon reactor, modified, L 450 mm, OD 

12 mm, ID 7 mm 

IVA1286420 1286420 Glassy carbon reactor, one side open, one side 

closed with a 2 mm centric hole, L 420 mm, 

OD 12 mm, ID 8,6 mm 

IVA127453 --- Glassy carbon reactor, OD 12 mm, ID 7 mm 

(alternative with ID 8,6 mm), L= 453 mm 

Suitable for IVA Bottom-Feed-Adapter (one side 

drilled to ID 8.6 mm) 

IVA127453MOD --- Glassy Carbon Tube, L: 453 mm, OD 12 mm, 

ID 7mm (alternative with 8,6 mm), one side 

closed, 2mm centric hole. Suitable for IVA Bottom 

Feed Adapter (one side drilled to ID 8.6 mm) 

IVA122999 --- Graphite cover with 2 mm hole for glassy carbon 

tube with 7 or 8.6 mm ID, for liquids 

IVA35010100BFA --- Bottom-Feed-Adapter for TC/EA (Fig. 17) 

with 1/16” tube 

IVA35010100BFA- 

FLASH 

--- Bottom-Feed-Adapter for Flash HT, (Fig. 17) 

with 1/16” tube 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

IVA1121470 1121470 Thermocouple for TC/EA 1 pc. 

IVA29000063 --- O-Rings for Bottom Feed Adapter / 2 pc. 1 set 

IVA1121120 1121120 O-Ring for TC/EA chamfer square profile 1 pc. 

IVA9917400 1117400 Glassy carbon granulate, shatterproof 

particle size 3150 – 4000 µm 

50 g 

IVA1121351 1121351 Graphite reactor for solids 1 pc. 

IVA1132080 --- Graphite reactor for liquids 1 pc. 

IVA1196250 1196250 Stainless Steel tube for liquids 1 pc. 

IVA12365 --- Glassy Carbon Adapter f. liquids (Fig. 18) 

(alternative to P/N IVA1196250) 

1 pc. 

IVA1121341 1121341 Graphite rod (ash remover) 1 pc. 

IVA1117332 1117332 Graphite crucible (Fig. 16) 1 pc. 

IVA46820090 1121320 Ceramic reactor, L 470 mm, OD 17 mm, ID 13 mm 1 pc. 

IVA46820090MOD --- Ceramic reactor, L 450 mm, OD 17 mm, ID 13 mm 1 pc. 

IVA468200900-1 --- Ceramic reactor, L 470 mm, OD 18 mm, ID 14 mm 1 pc. 

11 / 65

Silver wool 

5. TC / EA 


IVA0703043 --- Electric cooling fan for TC / EA 1 pc. 

SA990786B 1117430 Silver wool, fine 2 g 

SA990786 1117430 Silver wool, fine 10 g 

SA990786-C 1117430 Silver wool, fine 50 g 

IVA35429300 --- Heating Element (Fig. 19) 1 pc. 

IVA-5067377 --- Activated coal 10 g 

IVA33822000 Ascarite 100 g 

IVA1121030 1121030 Packed Column for TC/EA, SS 4 mm ID, 

¼” AD, 2 feet, Filling: Molecular sieve 5 A, 

80 – 100 mesh 

Glassy carbon granulate 

Fig. 16: TC / EA accessories 

Fig. 17: Bottom-Feed-Adapter for TC/EA (left) 

and Flash HT (right) 

Graphite crucible 

Fig. 19: Heating Element 


Graphite rod 

Ceramic reactor 

Fig. 18: Glassy Carbon Adapter 

1 pc. 

Glassy carbon reactor 

12 / 65

6 WATER / CARBON DIOXIDE TRAPS 

Part No. Ref. 

Code 


SA990740 28113100 Water-trap (small size), complete with filter tube, 

seals and screw caps 

1 pc. 

SA990741 28113090 Carbon dioxide-trap (large size),complete with filter 

tube, seals and screw caps 


1 pc. 

IVA23103008 --- Water-trap (small size) w/o caps 1 pc. 

IVA28113008 --- CO2-Trap (large size) w/o caps 1 pc. 

IVA28113060 28113060 Trap for NA2000/NA2500/Flash EA (fig. 20) 1 pc. 

Fig. 20: Trap 

SA29000051 29000051 O-Ring lubricant 1 pc. 

IVA29013603 29013603 Seals for filter tube, thick 3,5 mm, silicone/PTFE coated 2 pc. 

IVA29013603-10 29013603 Seals for filter tube, thick 3,5 mm, silicone/PTFE coated 10 pc. 

IVA29003635 29003635 Silicone seals for filter tube, thick 4 mm 

(modified filter coupling IVA34709135MOD) 

2 pc. 

IVA05000369 --- Viton O-Ring for water trap 1 pc. 

IVA29010082 29010082 O-Ring for Absorption filter (IVA28113060) 2 pc. 

IVA34709135 34709133 Tube coupling, stainless steel, 2 mm 1 pc. 

IVA28113104 28113104 Adsorption filter (small size) without fast connectors 

(for Flash) 

IVA28113064 28113064 Adsorption filter (large size) without fast connectors 

(for Flash) 

1 pc. 

1 pc. 


IVA34709135MOD --- Modified filter coupling, stainless steel, 2 mm Set of 2 pc. 

Fig. 21: Water-trap complete with modified filter coupling 

13 / 65

7 SCRUBBER TUBE ASSEMBLY DETAILS 

Water trap 

SA990740 


Fig. 22: Water / Carbon dioxide trap 

Edelstahlrohr 

Stainless steel tube 



Schraube Stainless steel MB 6tubing 

nut MB 6 


Dichtolive Alu 


Tubing olive aluminium 


Verbinder Connector, Messing brass 


Dichtolive 

Tubing olive 

Alu 

aluminium 



Schraube MB 6 


Stainless steel tubing nut 6MB 


Verschraubungen für Filter 


Verschraubungen Screw cap für Falle 


Verbindungsrohr 

Tube coupling, stainless steel 


PTFE-Dichtungen 

Seal for filter tube 


Links: H2O-Filter 

SA990740 

Carbon dioxide trap 

SA990741 

Rechts:CO2-Filter 

SA990741 

14 / 65

8 GAS FITTING SYSTEMS (2 mm, 1/16” etc.) 


IVA198001 --- Stainless steel tube, OD 1/8”, ID 2 mm 1 m 

IVA590133 --- Stainless steel tube, OD 1/16”, ID 1 mm** 1 m 

IVA39102500 39102500 Stainless steel tube, OD 2 mm, ID 1 mm 5 m 

IVA42001501 42001501 PTFE tube, OD 2 mm, ID 1 mm 5 m 

IVA42001601 42001600 PTFE tubing 4 x 2 mm 5 m 

IVA42001701 42001700 PTFE tubing 6 x 4 mm 5 m 

IVA42010000 42010000 PE tube, blue, OD 5 mm, ID 3 mm 5 m 

IVA29034044 29034044 Tubing olive, aluminium, ID 1,6 mm 10 pc. 

IVA29034045 29034045 Tubing olive, aluminium, ID 2 mm 10 pc. 

IVA29034245 29034245 Tubing olive, stainless steel, ID 2 mm 10 pc. 

IVA29034545 29034545 Tubing olive, PTFE, ID 2 mm 10 pc. 

IVA35034108 35034108 Rubber Holder SST 6 MB 5 pc. 

IVA35040403 35040403 Tubing nut 6MB, stainless steel, 2 mm 10 pc. 

IVA35045100 35045100 Blanking nut 6MB, brass 10 pc. 

IVA35045100-SS --- Blanking nut 6MB, stainless steel 10 pc. 

IVA34734100 34734100 Tubing connector, brass, ID 2 mm 5 pc. 

IVA34714100 34714100 Tubing connector, brass, complete, incl. tubing olives, 

nuts 

1 set 

IVA34714400 34714400 Tubing connector, stainless steel, ID 2 mm 1 pc. 

IVA34734100-SS 34734100 Tubing connector, stainless steel, incl. tubing olives, 

nuts 

1 set 

IVA34738103 34738103 Tee-connector, brass 5 pc. 

Tubing olives 

Cross-connector 

Complete set 

Fig. 23: Nuts, tubing olives and tubing connector 

**SS-Tube OD 1/16” also available with ID 0.5 mm, 0.25 mm or 0.17. 


Blanking nuts, brass 

6MB nuts, stainless steel 

Tubing connectors, brass 

15 / 65


8. GAS FITTING SYSTEMS (2 mm, 1/16” etc.) 


IVA34718103 34718103 Tee-connector, brass, incl. tubing olives, 

nuts 

1 set 

IVA34736100 34736100 Cross-connector, brass 5 pc. 

IVA34716100B --- Cross-connector, brass 

complete with tubing olives and nuts 

1 set 

IVA34705435 34705435 Connection reducing w/tube 1 pc. 

IVA590200 --- Cutting tool for 1/16” / 2 mm tube (Fig.24) 1 pc. 

IVA-SS-100-6 --- Linear-connector, SS, 1/16” 1 pc. 

IVA-SS-100-P --- Blind nut, SS, 1/16” 1 pc. 

IVA198007 --- SNOOP Liquid leak detector, 236 ml 

(figure 25) 

IVA9980610/ 


--- Helium leak detector, rechargeable, 

220 VAC, Type Varian or Restek* 

IVA9983610 --- Helium leak detector, rechargeable, 

240 VAC, Type Varian for U.K. 

Fig. 24: Cutting tool w. SS tube Fig. 25: Snoop Liquid leak detector 

9 CHART PAPER 

1 pc. 

1 pc. 

1 pc. 


IVA00006005 00006005 Chart paper for DP 110 / 200 1 roll 

Fig. 26: Chart paper 

16 / 65

10 CERTIFIED ORGANIC / ANORGANIC STANDARDS 

Part No. Description Configuration Unit 

SA990744 Acetanilide 

Ref. Code: 33836700 

SA990744B Acetanilide 

Ref. Code: 33836700 

SA990745 Anthracene 

Ref. Code: 33842300 

IVA33840023 Aspartic Acid 

Ref. Code: 33840023 

SA990746 Atropine 

Ref. Code: 33824400 

SA990746B Atropine 

Ref. Code: 33824400 


C % H % N % O % S % 

71,09 6,71 10,36 11,81 --- 1 g 

71,09 6,71 10,36 11,81 --- 2 g 

94,34 5,66 --- --- --- 1 g 

36,09 5,3 10,52 48,08 --- 10 g 

70,56 8,01 4,84 16,59 --- 1 g 

70,56 8,01 4,84 16,59 --- 2 g 

SA990753 Atropinsulphate 58,77 7,25 4,03 25,33 4,61 1 g 

SA990752 BBOT 

Ref. Code : 33835210 

SA990752B BBOT 

Ref. Code : 33835210 

SA990747 Benzoic Acid 

Ref. Code : 33822500 

SA990747B Benzoic Acid 

Ref. Code : 33822500 

72,53 6,09 6,51 7,43 7,44 1 g 

72,53 6,09 6,51 7,43 7,44 2 g 

68,85 4,95 --- 26,20 --- 1 g 

68,85 4,95 --- 26,20 --- 2 g 

IVA33820080 Bromobenzoic Acid 41,82 2,51 --- (15,92) --- 1 g 

IVA33820090 Chlorobenzoic Acid 53,70 3,22 --- 20,44 --- 1 g 

SA990748 Cyclohexanone- 

2,4-Dinitrophenylhydrazone 

Ref. Code: 33822400 

SA990749 1-Chloro-2,4- 

Dinitrobenzene 

Ref. Code: 33822401 

SA990812 Phenanthrene 

Ref. Code: 33837520 

51,79 5,07 20,14 23,00 --- 1 g 

35,58 1,49 13,83 31,60 --- 1 g 

93,55 5,62 0,18 --- 0,46 1 g 

IVA33856680 3,5-Dinitrobenzoic Acid 39,64 1,9 13,20 45,25 --- 1 g 

IVA33802013 Fluorobenzoic Acid 60,01 3,59 --- (22,84) --- 1 g 

17 / 65

10. CERTIFIED ORGANIC / ANORGANIC STANDARDS 

Part No. Description configuration Unit 

IVA33820400 Imidazol 

Ref. Code: 33835430 

SA33835430 Imidazol 

Ref. Code: 33835430 

SA33800110 EDTA Standard 

Ref. Code: 33800110 


C % H % N % O % S % 

52,93 5,92 41,15 --- --- 1 g 

52,93 5,92 41,15 --- --- 2 g 

--- --- --- --- --- 100 g 

IVA99992-Z Caffeine 49,48 5,19 28,85 16,48 --- 1 g 

IVA3382035 L-Cystine 

Ref. Code: 33840018 

IVA33840018 L-Cystine 

Ref. Code: 33840018 

SA990751 Methionine 

Ref. Code: 33835220 

SA990751B Methionine 

Ref. Code: 33835220 

SA33840019 Nicotinamide 

Ref. Code: 33840019 

29,99 5,03 11,66 26,69 26,63 1 g 

29,99 5,03 11,66 26,69 26,63 1 g 

40,25 7,43 9,39 21,44 21,49 10 g 

40,25 7,43 9,39 21,44 21,49 25 g 

59,01 4,95 22,94 13,10 --- 2 g 

IVA33802015 Nitroanillin 52,17 4,38 20,29 23,16 --- 1 g 

SA990750 Sulphanilamide 

Ref. Code: 33825100 

SA990750B Sulphanilamide 

Ref. Code: 33825100 

41,84 4,68 16,27 18,58 18,62 1 g 

41,84 4,68 16,27 18,58 18,62 2 g 

IVA33802043 Sulphanilic Acid 41,61 4,07 8,09 27,71 18,51 1 g 

IVA33820430 Stearic Acid 76,00 12,75 --- 11,25 --- 1 g 

IVA3382102 Stearic Acid 76,00 12,75 --- 11,25 --- 5 g 

IVA33820180 Trifluoroacetanalide 

Ref. Code: 33820180 

IVA99991 Urea 

Ref. Code: 33840001 

SA33840002 Urea 

Ref. Code: 33840002 

The values in brackets are not certified. 

50,80 3,20 7,41 (8,46) --- 1 g 

20,00 6,71 46,65 26,64 --- 2 g 

20,00 6,71 46,65 26,64 --- 10 g 

18 / 65


More standards, reference materials, included GC Isolink CN standards 



C % H % N % O % S % 

IVA33801515 Apple leaves --- --- 2,25 --- (0,18) 5 g 

IVA33840024 Pasta Ref. Material 

Ref. Code: 33840024 

--- --- 1,92 --- --- 10 g 

SA33840028 Pasta Ref. Material 

Ref. Code: 33840028 

--- --- 1,92 --- --- 100 g 

IVA33802162 Algae (Spirulina) 46,16 6,95 10,26 --- 0,909 30 g 

IVA33820500 Tomato leaves --- (5,2) 3,03 --- (0,96) 10 g 

IVA33802156 Wheat flour 39,50 --- 1,50 --- 0,10 30 g 

IVA33802158 Sorghum flour 41,50 --- 1,50 --- 0,10 30 g 

IVANCSFC 

28006** 

Coal Standard 50 g 

IVA33835240 Lubricant Standard 

Ref. Code: 33835240 

76,30 11,96 0,58 --- 2,42 2 g 

IVA-SMOS012 Mineral oil --- --- --- --- 0,12 100 ml 

IVA-SMO040 Mineral oil --- --- --- --- 0,40 100 ml 

IVA-SMOS09 Mineral oil --- --- --- --- 0,90 100 ml 

IVA3387340 Alkane-Mix 

(C14-C16) in Isooctane 

200 ng/µl 


Ref. Code: 

1170520 


Ref. Code: 

1187860 

Alkane-Mix 

(C14-C16) 

in Isooctane 15 ng/µl 

for GC IsoLink CN 

Caffeine (150 µl/ml) 

in Aceton for GC 

Isolink CN 

IVA3387330 Vanillin 6 mg 

IVA33822501 Benzoic Acid p.A. 10 g 

** Values on request. 

1 ml 

1 ml 

1 ml 

19 / 65


More standards, reference materials, included GC IsoLink CN standards 



C % H % N % O % S % 

IVA33802273 Alfalfa 45,77 5,42 3,37 --- 0,20 30 g 

IVA33802276 Oatmeal 47,76 5,72 2,09 --- 0,16 30 g 

IVA33802141 Orchard Leaves 44,52 5,7-6,5 2-2,8 --- --- 30 g 

IVA33802277 Barley 46,17 6,33 1,86 --- 0,14 30 g 

IVA33802272 Corn Gluten 50,29 6,33 10,95 --- 0,96 30 g 

IVA33802270 Corn Meal 45,35 5,44 1,91 --- 0,15 30 g 

IVA33802278 Rice Flour 44,70 5,88 1,36 --- 0,12 30 g 

IVA33802275 Rye Flour 44,25 5,78 1,86 --- 0,17 30 g 

IVA33802271 Soy Bean Meal 45,18 5,69 7,98 --- 0,37 30 g 

IVA33802160 Chitin 45,07 6,71 6,88 37,27 --- 30 g 

IVA33802164 Algae (Bladderwrack) 33,86 4,87 1,27 --- --- 30 g 

IVA33802166 Birch Leaf 48,33 6,36 2,09 --- 0,16 30 g 

IVA33802168 Coconut Shell Powder 48,11 6,14 0,12 --- --- 30 g 

IVA33802170 Olive Stone Powder 47,46 6,26 0,18 --- --- 30 g 

IVA33801547 Peach Leaf --- --- 2,96 --- 0,2 5 g 

More standards on request. 

20 / 65


11 SOIL STANDARDS / SEDIMENTS 

The C- and N-amounts of non certified samples have been tested by an international 

comparison of 75 laboratories. The methods of Dumas and Kjeldahl didn’t have 

another result. The samples are very homogeneous. If you are doing analysis with 

very low quantities, you will realize proper and reproducible results. 


C% H% N% O% S% 

IVA99994 Standard 1 3,500 --- 0,216 --- --- 50 g 





More soil standards 


C% H% N% O% S% 

IVA338XXX PACS-2 (Marine sediment) --- --- --- --- 1,29 65 g 

IVA4202711 Montana Soil, certified --- --- --- --- 0,042 10 g 

IVA8902709 San Joaquin soil certified --- --- --- --- 0,089 10 g 

IVA33802150 Sediment, certified 6,70 --- 0,50 --- 1,00 30 g 

IVA33802152 Soil (NCS), certified 1,65 --- 0,15 --- 0,03 30 g 

IVA12007408 Soil, certified --- --- 0,037 --- (0,0126) 10g 

IVA33840025 Soil NC reference mat. 

Ref. Code: 33840025 

IVA33840026 Soil NCS reference mat. 

Ref. Code: 33840026 

1,998 --- 0,196 --- --- 5 g 

1,998 --- 0,196 --- 0,032 2 g 

21 / 65


12 ISOTOPE STANDARDS 

12.1 Certified isotope standards 

12.1.1 Natural reference materials 

Part No. Description Configuration Unit 

δ 13 

RSD U δ 15 

RSD U 

CV-PDB 

NAIR 

-26,00 0,04 0,13 +4,50 0,09 0,19 5 g 

IVA33802151 Sediment (High 

Organic) 

IVA33802153 Soil (Low Organic) -27,50 0,02 0,11 +6,70 0,07 0,15 5 g 

IVA33802155 Protein (Casein) -27,00 0,04 0,13 +6,00 0,03 0,08 5 g 

IVA33802157 Wheat flour (C3) -27,20 0,04 0,13 +2,90 0,08 0,17 5 g 

IVA33802159 Sorghum flour (C4) -13,80 0,08 0,19 +1,60 0,07 0,15 5 g 

Part No. Description Configuration 

δ 34 

RSD U 

SV-CDT 

IVA33802151 Sediment (High Organic) +4,00 0,24 0,8 

IVA33802153 Soil (Low Organic) +5,00 0,44 1,4 

IVA33802155 Protein (Casein) +6,00 0,20 0,8 

IVA33802157 Wheat flour (C3) -1,00 0,32 0,8 

IVA33802159 Sorghum flour (C4) +10,00 0,41 1,0 

Note: Typical values shown. Actual values vary slightly from batch to batch, 

true values are shown on the certificate of analysis provided. 

22 / 65


12.1. Certified Isotope Standards 

12.1.2 Water standards 

Water standards w. calibrated values of 

Hydrogen and Oxygen Isotope ratios: 

Part No. Description Unit 

δ 2 H 

δ 18 O 

V-SMOW 

S 0 /00 

V-SMOW 

S 0 /00 

IVA33802190 High Enriched Water +1702 5,0 +267 0,9 25 ml 

IVA33802191 Medium Enriched Water +843 2,6 +109 0,3 25 ml 

IVA33802192 Zero Natural Water +5 0,8 +1 0,2 25 ml 

IVA33802193 Medium Natural Water -62 2,1 -10 0,2 25 ml 

IVA33802194 Low Natural Water -157 1,3 -20 0,1 25 ml 

IVA33802195 Set of all 5 standards 5 x225 ml 

All calibrations carried out by reference to V-SMOW2, SLAP2 and GISP as supplied 

by IAEA Vienna. 

12.2 Working isotope standards 


δ 13 CV-PDB S 0 /00 δ 15 NAir S 0 /00 

IVA33802174 Urea -45,38 ±0,17 -0,85 ±0,16 5 g 

More standards on request. 

23 / 65


13 SPARE PARTS 


IVA31302100 31302100 Bi-pneumatic valve diaphragm 10 pc. 

Fig. 27: Bi-pneumatic valve diaphragm) 

IVA24500300 24500300 Oxygen metering loop 5 ml, used 1 pc. 



IVA37001101 37001101 Slider for autosampler AS 200 (PTFE) 1 pc. 

IVA37001102 37001102 Slider for autosampler AS 200 

(PEEK or Valflon®) 

1 pc. 

IVA19004200 19004200 Spare kit AS 200LS 1 set 

IVA21706005 21706005 Feather/arm for AS 200S 1 pc. 

IVA27205001 27205001 Drum No.1 AS200 (0-49) 1 pc. 




IVA25105082 25105082 AS200 autosampler, used 1 pc. 

IVA19004157 19004157 Cone for autosampler AS 128, complete 1 pc. 

IVA29032940 29032940 O-ring for cone AS 128 1 pc. 

IVA199004161 --- O-ring for window AS128 1 pc. 

24 / 65

Kit-spares 

AS 200LS 

(IVA19004200) 


13. SPARE SPARTS 

Slider in PTFE (IVA37001101) and PEEK (IVA37001102) 

Fig. 28: O-rings, slider in PTFE and PEEK, cone 


IVA19004161 19004161 O-ring-kit for AS 128 1 set 

IVA31505400 31505400 Cam spring for AS 128 (figure 29) 

Fig. 29: Cam spring 

1 pc. 

IVA19001234 --- Ball bearing for AS128 1 pc. 

IVA24010071 24010071 Drum No.1 AS128 (figure 30) 1 pc. 

IVA24010072 24010072 Drum No.2 AS128 1 pc. 



Fig. 30: Drum AS128 Fig. 31: Drum MAS200R 

Cone (IVA19004157) 

O-ring-kit AS 128 

(IVA19004161) 

IVA24010135 24010135 Drum MAS200R No. 1 (0-32), (fig. 31) 1 pc. 

IVA24010136 24010136 Drum MAS200R No. 2 (33-63) 1 pc. 


25 / 65





IVA43217400 43217400 Autosampler MAS200R with a 32 position 

drum 

IVA43210150 43210150 MAS200R Driver for upgrading TC/EA and 

previous OEM models (for servo air to 

electric signal) 

1 pc. 

1 pc. 

IVA29030017 29030017 O-Ring for MAS200R 1 pc. 

IVA30108020 30108020 Replacement window MAS200R 1 pc. 

IVA29030014 29030014 O-Ring for window MAS200R 1 pc. 

IVA21706005 21706005 Feather/arm for AS 200S / MAS200R 1 pc. 



IVA34301512H Shaft with O-rings for autosampler MAS200 R (figure 32) 1 pc. 

IVA34301512R O-ring, green, for shaft (IVA34301512) 3 pc. 

IVA03968006 Vacuum grease 10 -6 mm Hg 50 g 

Fig. 32: Shaft (IVA34301512) w. O-rings Fig. 33: Tool (IVA34301512WZ) 

IVA34301512WZ Tool for replacement the O-rings (figure 33) 1 set 

IVASERVICE We replace the O-rings in our business premises. 

Our Service: 

Repair of autosampler AS200, AS128 and MAS200 

26 / 65




IVA41.00.161 --- O-Ring, large, Zero Blank Autosampler 1 pc. 

IVA41.00.170 --- O-Ring-Set incl. o-ring for isolation valve 

for Zero Blank Autosampler (figure 34) 

IVA41.00.140 --- Purge shut off valve for Zero Blank 

autosampler 

Fig. 34: O-Ring set complete – Zero Blank AS 

IVA41.00.005 --- Autosampler Zero Blank, Type Costech, 

with either 32, 50 or 100 position carousel 

1 set 

1 pc. 

1 pc. 

IVA41.00.101 --- Control modul for Zero Blank autosampler 1 pc. 

IVA41.00.110 --- Isolation valve 1 pc. 

Please contact us, if you are interested in Zero 

Blank autosampler, type Costech*. 


IVA43210070 43210070 External Carrier box for pressure air for 

previous autosampler AS200 or AS128 

using on Flash EA or Flash HT 

1 pc. 

IVA25105082 25105082 AS200 autosampler, used 1 pc. 

27 / 65




IVA40600300 40600300 Electronic cooling fan for EA 1 pc. 

Fig. 35: Electronic cooling fan for EA 

IVA0703043 --- Electronic cooling fan for TC / EA 1 pc. 

IVA40510100 40510100 Four way solenoid mirco valve for actuation of 

the autosampler and bimatic switching valve 

IVA40517080 40517080 Microvalve for oxygen and helium 

(EA1110 and NA2500) 

IVA42509150 42509150 EFCt Module (complete for Flash EA1112 

with S/N upper 20034906 

1 pc. 

1 pc. 

1 pc. 

IVA34740403 34740403 Fitting M5-6MB 10 pc. 

Microvalve for O2 / He 


Fitting M5-6MB 


Fig. 36:Microvalve, fittings and four way 

solenoid micro valve 

Four way solenoid 

micro valve 


28 / 65



Part No. Ref. 

Code 


IVA35400900-25 35400900 Furnace for EA 1106 1 pc. 

IVA35460010 35460010 Furnace for NA 1500 Series 1 1 pc. 

SA35460015B 35460015 Heating element, NA 1500 Series 2 / NA 2500 

EA 1108 / EA 1110 

Fig. 37: Heating element (SA35460015B) 

SA40320000 40320000 Thermocouple for furnace 

(for all types except Flash) 

Fig. 38: Thermocouple for furnace (SA40320000) 

1 pc. 

1 pc. 

IVA40320005 40320005 Thermocouple for furnace (only for Flash EA) 1 pc. 

IVA35460021 35460021 Furnace for Flash EA (without thermocouple) 1 pc. 

Fig. 38: Furnace for Flash EA 

ATTENTION: More spare parts for 

EA1106/NA1500/NA2000/EA1108/NA2500/EA1110/EA1112 

and used instruments in good conditions on request!!! 

29 / 65




IVA34715401 34715401 Reduction union, 6 mm to 2 mm 1 pc. 

IVA35010100 --- Reduction union, stainless steel, 18 mm to 2 mm 

for quartz tube NA 1500 Series 2/NA 2000/ 

NA 2500/EA 1108/EA 1100, incl. 1 m PFA-tube 

IVA34709912TE --- Joint couple incl. 2 reduction unions, O-ring, 

adaptor and 1 m PFA-tube with OD 1/8“ 

stainless steel, 18 – 2 mm 

Fig. 39: Reduction union 

with tube (IVA35010100) 

Fig. 40: Joint couple 

(IVA34709912TE) 

1 pc. 

1 Set 

IVA-PFA-T2-030 --- PFA-tube 1/8“ 1 m 

IVA-SS-200-1-2 --- Reduction union, stainless steel, for reduction 

18 mm – 1/8“ 

1 pc. 

IVA-SS-204-1 --- Back ferrule for 1/8“ 2 pc. 

IVA-SS-203-1 --- Front ferrule for 1/8“ 2 pc. 

IVA42001501 42001501 PTFE-tube, OD 2 mm, ID 1 mm 5 m 

IVAXXXXX --- Blanking nut for leak test 1 pc. 

IVA35008433 35008433 Reactor Coupling Union Flash EA 1 pc. 

IVA35010200 35008427 Reactor Coupling Union Flash EA IRMS / HT 

Design IVA (figure 41), complete with reactor 

IVA35008427T 35008427 

35011410 

35603210 

retaining nut and metal ring 

Reactor Coupling Union Flash EA IRMS / HT 

Design Thermo* (figure 42), complete with 

reactor retaining nut and metal ring 

IVA29022910 29022910 Viton O-ring, top, 18-20 mm, chamfered square 

profile, suitable for IVA35010200 and 

IVA35008427T 

1 Set 

1 set 

5 pc. 

IVA40311095 40311095 Temperature Sensor Pt 100 for oven 1 pc. 

30 / 65

Fig: 41: Reactor Coupling Union 

Flash EA (IVA35008433) 



Fig. 42: Reactor Coupling Union 

EA IRMS (IVA35008427T) 

Fig 43: Left: Reactor Coupling Union EA IRMS, design Thermo* 

Right:Reactor Coupling Union EA IRMS design IVA 

Fig. 44: Reactor coupling union EA IRMS design IVA (IVA35010200) 

31 / 65

GVF*: 15 % Graphit / 85% Vespel 


14 FERRULES and FITTINGS 


IVA103408 0674930 Nut SSNE/16 5 pc. 

Straight ferrule 

IVA072657 0674800 Straight ferrule with bore ID 1/16“, 

GVF*16-16 

10 pc. 

IVA072661 1121110 No-hole ferrule (blank), GVF*16-000 10 pc. 

Reducing ferrules 

IVA072659 1004850 Ferrule with bore ID 0.3 mm, GVF*16-003 10 pc. 



IVA072655 (1068700) Ferrule with bore ID 0.8 mm, GFV*16-008 10 pc. 

IVA29020016 1068700 Ferrule with bore ID 0.8 mm, 1/16” GVF 

(40% Graphit / 60 % Vespel) 

10 pc. 

IVA072658 --- Ferrule with bore ID 0.9 mm, GVF*16-009 10 pc. 

IVA072656 1041660 Ferrule with bore ID 1 mm, GVF*16-010 10 pc. 

IVA29020038 --- Teflon ferrule 1/16” x 0.8 mm 10 pc. 

IVA29020042 0674790 Teflon ferrule 1/8” x 1/16” 10 pc. 

IVA29020011 1004900 Ferrule GVF ¼” x ¼” 10 pc. 

IVA072657 0674800 Ferrule 1/16”, GVF*16-16 10 pc. 

IVA072610 1004760 Reducing ferrule, short, with bore ID 0.5 

mm, GFF16-005 

IVA072607 1004770 Reducing ferrule, short, with bore ID 1.0 

mm, GFF16-010 

10 pc. 

10 pc. 

IVA072603 1004590 Ferrule with hole 1/16”, GFF16-16 10 pc. 

IVA072601 1004610 Ferrule with hole ¼”, GFF4-4 for trap 10 pc. 

IVA072605 --- Ferrule with hole 5.0 mm, GFF05-050 10 pc. 

32 / 65


14. FERRULES and FITTINGS 

Fig. 45: Reducing ferrules, short 


5181-3323 1066810 Ferrule Vespel/Graphite with bore 0.4 

mm, for GC column 

5080-8853 --- Ferrule Graphite with bore 0.5 mm 

for GC column 

5080-8773 --- Ferrule Graphite with bore 1.0 mm 

for GC column 

10 pc. 

10 pc. 

10 pc. 

5181-8830 --- Nut for GC 6890, type Agilent 2 pc. 

2-hole ferrules 

IVA072660 1060170 2-hole ferrule with bore ID 0.3 mm, 

GVF16(2)-003 

IVA072662 1006490 2-hole ferrule with bore ID 0.4 mm 

GVF16(2)-004 

IVA1229470 1229470 2-hole-ferrule 1/16” with bore ID 0.4 mm, 

Silver (part of GC splitter holder, IsoLink) 

IVA072664 1004780 2-hole ferrule with bore ID 0.5 mm 

GVF16(2)-005 

IVA0726641 --- 2-hole ferrule with bore ID 0.4 and 0.3 mm 

GVF16(2)-004-003 

IVA0726640 --- 2-hole ferrule with bore ID 0.5 and 0.3 mm 

GVF16(2)-005-003 


3-hole ferrule 

1047990 2-hole ferrule with bore ID 0.5 and 0.4 mm 

GVF16(2)-005-004 

IVA072665 1004790 3-hole ferrule with bore ID 3 x 0,4 mm 

GVF16(3)-004 

10 pc. 

10 pc. 

10 pc. 

10 pc. 

10 pc. 

10 pc. 

10 pc. 

10 pc. 

33 / 65



Fused silica adapters, connectors and supplies 


IVAFS1.5-5 9000342 1/16" Fused Silica Adaptor, for tubing with 

OD 0,5 mm 

IVAFS1.8-5 --- 1/16" Fused Silica Adaptor, for tubing with 

OD 0,8 mm 

IVAFS1R.5-5 1092550 Removable Fused Silica Adaptor (FSR) 

1/16", removable for tubing with OD 0,5 

mm, Polyimide, Valcon 

IVAFS1R.8-5 1068580 1/16" Removable Fused Silica Adapters 

(FSR) for tubing with OD 0.4 – 0.5mm 

(6-port valve PreCon), Polyimide, Valcon 

5 pc. 

5 pc. 

5 pc. 

5 pc. 

IVAFS1L.8-5 --- 1/16” Replacement liners, Polyimide, 

Valcon for tubing OD 0.5 to 0.8 mm, 

(6-port valve PreCon) 

5 pc. 

IVAZF1V-5 1040490 1/16“ Polymeric ferrule, Polyimide, Valcon 5 pc. 

IVAZF1V-10 1040490 1/16“ Polymeric ferrule, Polyimide, Valcon 

for GCC-tube 

10 pc. 

IVAZF1TF-10 0662950 1/16“ Polymeric ferrule, PTFE 10 pc. 

Fig. 46: Ferrule with liner Fig. 47: Fused silica adaptor 

IVAFS.25-5 1040460 1/32” Fused Silica Adaptor, for tubing with 

OD 0,25 mm 


OD 0,4 mm 


OD 0,5 mm 

5 pc. 

5 pc. 

5 pc. 

IVAFRK1 1121090 Ferrule removal kit: designed to grip and 

remove FSR, if they get stuck in a fitting 

detail 

1 pc. 

IVAZCN1-10 --- Special nuts for FSR, 1/16” SS 10 pc. 

IVALZCN1-10 --- Special nuts for FSR, 1/16” SS long 10 pc. 

34 / 65




IVAJR-800 --- ValvTool ¼” and 5/16” wrench 1 pc. 

IVAJR-804 0571670 Open end wrench ¼” and 5/16”, for IsoLink 1 pc. 

IVA1009150 1009150 Open end wrench 3/16” – ¼”, for IsoLink 1 pc. 

IVAFSR.5-5 1068590 1/32" Removable Fused Silica Adaptor, for 

tubing with OD 0.5 mm 

IVAZRU1.5 1044110 Reducing union 1/16" to 1/32", stainless steel, 

bore 0.25 mm 

IVAZU.5T --- Internal union 1/32", stainless steel 

1/32” bore 

5 pc. 

1 pc. 

1 pc. 

IVAZT.5 1040440 1/32" T-piece, stainless steel, bore 0.25 mm 1 pc. 

IVAZX.5 1040430 1/32" Cross-connector, stainless steel, bore 

0.25 mm 

Fig. 48:T-piece (IVAZT.5) Fig. 49: Cross-connector (IVAZX.5) 


1 pc. 

IVA-SS-400-6-1 Reducing union 1/4" to 1/16", SS, for GC 

column 

1 pc. 

IVA-SS-403-1 Front ferrule ¼”, SS 2 pc. 

IVA-SS-404-1 Back ferrule ¼”, SS 2 pc. 

IVA-SS-203-1 Front ferrule 1/8”, SS 2 pc. 

IVA-SS-204-1 Back ferrule 1/8”, SS 2 pc. 

IVA-SS-100 Front and back ferrule 1/16”, SS 10 pc. 

IVA405043S2-SS 4-way ball valve 1/8”, SS 1 pc. 

35 / 65

SilTite metal ferrules: 




IVA073450 --- MS Interface SilTite Kit (2 nuts & 10 

ferrules) for column ID 0.25 mm 

IVA073330 1241460 Replacement Ferrules for column 

ID 0.25 mm 

IVA073451 --- MS Interface SilTite Kit (2 nuts & 10 

ferrules) for column ID 0.32 mm 

IVA073331 1226600 Replacement Ferrules for column 

ID 0.32 mm 

1 Kit 

10 pc. 

1 Kit 

10 pc. 

IVA073230 1241440 Replacement Nuts 5 pc. 

SGE has developed a metal ferrule specificially for use with fused silica GC columns. 

Combining a specially designed ferrule and nut system, the SilTite ferrules must be 

used in conjunction with this special nut that is supplied with the ferrules. The 

geometry of the ferrule and nut combination makes it possible to swage the end of 

the ferrule to the fused silica tubing. This creates a leak-free seal that never needs 

re-thigtening – even after 400 temperature cycles between 70 °C and 400 °C. 

Constructed from identical material, the ferrule and nut expand and contract at the 

same rate as the oven temperature heats up and cools down. 

The SilTite ferrule fits into the 

specificially designed SilTite nut. 

This allows a perfect seal every 

time with the MS interface. 

Please note that this is only a small selection of the items of SGE, VICI 

Valco and Swagelok that IVA supplies. 

Please contact us, if you do not find the product you are looking for. 

36 / 65


15 PRESS FITS (desactivated) 


IVAPF2525 PressFit 0,25 – 0,25 mm 10 pc. 






IVAPFY19 Y-PressFit 0.19 mm 1 pc. 

IVAPFY252525 Y-PressFit 0,25 mm 1 pc. 



IVAPFY322525 Y-PressFit 0,25-0,25-0,32 mm 1 pc. 



IVA02170472 Universal-PressFit 10 pc. 

IVA02170473 Y-Universal-PressFit for 3 columns 1 pc. 

Further PressFits on request. 

37 / 65


16 RETENTION GAPS (Fused Silica) 

Our retention gaps are available with following specifications: 

HMDS (non-reactive), DPTMDS (middly reactive) and Carbowax (severely reactive) 

Please give us an information about the specification for the retention gap you do 

need. 


with 0,25 mm ID 

IVA26090102 Retention Gap, ID 0,25 mm 2 m 












IVA1004640 1004640 Fused Silica Capillary, 0.32 mm 1 m 

IVA0624685 1048990 Non-desactivated Fused Silica Capillary, 

0.1 mm ID, 0.2 mm OD 

IVA0624450 1045480 Fused Silica Capillary, 0.075 mm ID, 0.190 

mm AD 

IVA062444 0543380 Fused Silica Capillary, 0.05 mm ID, 0.220 

mm AD 

IVA0624455 --- Desactivated Fused Silica Capillary, 0.1 

mm ID, 0.36 mm OD 

IVA062454 --- Non-desactivated Fused Silica Capillary, 

0.11 mm ID, 0.17 mm OD 

More retention gaps on request. 

10 m 

2 m 

2 m 

25 m 

10 m 

38 / 65

17 Special items GCC / GCTC / Kiel / GasBench / Delta 


IVA1091830 Platinum Catalyst for hydrogen determination 

Ref. Code 1091830 

IVA3200515 Ceramic reactor for d13C and d15N 

length 320 mm, OD 1,5 mm, ID 0,5 mm 

IVA3201015 Ceramic reactor for d2H 

length 320 mm, OD 1,5 mm, ID 1,0 mm 


50 pc. 

1 pc. 

1 pc. 

The connection ceramic reactor – transfer capillary (with ID 0.32 mm) can be 

realized by the following adaptor, consisting of: 

- IVAZF1V-10 (1/16” Polymeric ferrule, Polyimide, Valcon) 

- IVAFS.5-5 (1/32” Fused Silica Adaptor for tubing with OD 0.5 mm) and 

- IVAZRU1.5 (Reducing union 1/16” to 1/32”, stainless steel, bore 0.25 mm) 

These and more fittings and ferrules you will find in chapter 14. 

IVA1236103 Backflush valve, 1/16”, for GC-C/TC III Interface 

Ref. Code 1041700 

1 pc. 

IVA123681 VSV-6 Valve Seat for SS on/off (valve SMOV-1) 5 pc. 

IVA1113430 GC/TC heater 1 pc. 

IVA1114450 Thermoelement for GC/TC 1 pc. 

IVA99001 Kiel device glass reaction vessel (Fig. 52), 

length 49,5 mm, Ref. Code 0754960 

1 pc. 

IVA99001MOD Kiel device glass reaction vessel (Fig. 52), l = 100 mm 1 pc. 

IVA24150072 PE-Caps for Kiel vessel, translucent (Fig. 52) 100 pc. 

IVA68454222060 Cryogenic solenoid valve (Kiel) 1 pc. 

IVA304H22XH Hypodermic tubing, 22 gauge, extra heavy wall (Kiel) 4 feet 

IVADSN1080PS3 Vial actuator cylinders (Kiel) 1 pc. 

IVALCN-1/4-PK6 LN2 swivel elbow connectors – transfer line to top of 

device (Kiel) 

10 pc. 

39 / 65

17. Special items GCC / GCTC / Kiel / GasBench / Delta 


IVAA4C6WP 6 port 2-pos-W-valve, manual 1/16“ x 4 mm 

175 C for PreCon 

IVASSAC6WP Rotor seal 6 port 2-pos-W-valve 1/16” x 4 mm 

175 C 

Further valves, rotor seals etc. on 

on request. 


1 pc. 

1 pc. 

Fig. 50: Valve W Type, 1/16“ fittings 


IVA100-GAS 100 ml Gas mouse for PreCon device (Fig. 51) 1 pc. 

IVA1127860 Chromium powder, 99.9 %, 100 mesh (Ref. Code 1127860) 250 g 

Fig. 51: Gas mouse Fig 52: Glass vial (Kiel) with and w/o cap 


IVA-PPTT020 0743390 Nafion tubing for water trap, GasBench II / 1 m 1 pc. 

IVA1114360 1114360 Needle for GasBench II 1 pc. 

IVA1137020 1137020 Needle for GasBench I 1 pc. 


IVA0569110 0569110 Edge Sealing DN 100, aluminium 1 pc. 

IVA0693220 0693220 Edge Sealing DN 63, aluminium 1 pc. 

IVA1166220 1166220 Z-deflection Delta V 1 pc. 

IVA1027480 1027480 Column for Delta Plus XP 1 pc. 

IVA0672460 0672460 Filament MAT252 1 pc. 

IVA1027920 1027920 Filament MS Delta plus / Delta V 1 pc. 

IVA1203200030 1203200030 Filament Polaris Q / DSQ II 1 pc. 

40 / 65

17. Special items GCC / GCTC / Kiel / GasBench / Delta 


IVA201111 1121070 Syringe 1 ml without needle (canula) 100 pc. 

IVA4710006025 1212080 Once-only canula 0,60x25 mm 100 pc. 

IVASEP0073 --- 6 mm TCSD predrilled septa 50 pc. 

SGE replacement valve on IRMS (P/N IVA2005-11-18): 


18 GC SEPTA for LIQUID INJECTOR 


IVA041872 Auto-Septa, 11 mm, for liquid injection 25 pc. 

IVA31303230 BTO-Septa, red, 11 mm 50 pc. 

11180938 11 mm Universal HT Injection Port Septa, transparent 25 pc. 

17180940 17 mm Universal HT Injection Port Septa, transparent 25 pc. 

IVA19004138 Manual Injection Device for Liquid or Gas Sampling 1 unit 

IVA19004138A Modified Injection Device Kit for Liquid Sampling 

- low bleeding 

(release of siloxanes) 

- good penetration and sealing 

properties (low fragmentation) 

Injector body for Flash EA1112 (HT), previous OEA 

models and TC/EA, Septum holder, Septa 

Against extra charge: Syringe e. g. 10 µl 

Fig. 53: Injection Port Septa 

- universal, long life 

GC-Septa 

- suitable for inlet 

temperatures of up to 

340 °C 

1 unit 

41 / 65


19 SYRINGES 

Fig. 54: Syringe and removable needles 


syringes with replacement needle 

IVA036504045 0.5 µl Micro volume syringe, plunger in needle, 50 mm, 

Gauge 23, cone Tipp for AS3000, Ref. Code 036504045 

IVA002050 10 µl R-syringe, gauge 26, 0.47 mm OD, needle length 

50 mm, bevel 

IVA202668 100 µl RN-syringe, gauge 22s, Pst. 5 

needle length 51 mm 

IVA778405 Replacement needle for 100 µl RN-syringe 

gauge 22s, Pst. 5, needle length 51 mm 

1 pc. 

1 pc. 

1 pc. 

6 pc. 

IVA005050 100 µl R-syringe, gauge 25, OD 0.5 mm, length 50 mm 1 pc. 

syringes with fixed needle 

IVA86259 0.5 µl syringe, Pst. 2, 70 mm needle length, OD 0.5 mm 1 pc. 

IVA203185 1.2 µl syringe, AS, gauge 26, needle length 51 mm, series 

7701.2 CTC 

1 pc. 

IVA06588411 2 µl syringe, 7002, Pst. 2, 70 mm needle length 1 pc. 

IVA001105 5 µl syringe, cone, gauge 26, OD 0.47 mm, needle length 

50 mm (TriPlus) 

IVA80308 10 µl syringe, 701 SN, Gauge 26, Pst. AS 

needle length 70 mm 

IVA002980 10 µl syringe, cone, OD 0,47 mm, gauge 26 

needle length 50 mm (TriPlus / AS3000 / AS2000 / AS200) 




50 mm (TriPlus / AS3000 / AS2000 / AS200) 

1 pc. 

1 pc. 

1 pc. 

6 pc. 

1 pc. 

42 / 65

17. Syringes 







80 mm (TriPlus and AS2000) 

IVA002992 10 µl syringe, cone, OD 0,47 mm, gauge 26, needle length 

80 mm (TriPlus and AS2000) 

IVA002987 10 µl gas tight syringe, cone, OD 0,63 mm, gauge 23 

needle length 50 mm, Ref. Code: 36502019 

(TriPlus and AS2000) 

IVA002972 10 µl gas tight syringe, cone, OD 0,63 mm, gauge 23 

needle length 50 mm, Ref. Code: 36502019 

(TriPlus and AS2000) 

IVA0318120 Replacement plunger for 10 µl gas tight syringe 

IVA002987 and IVA002972 


20 VIALS, CAPS and SEALS 

20.1 GASBENCH: Labco Vials and caps / Exetainer® 

1 pc. 

6 pc. 

1 pc. 

1 pc. 

1 pc. 

6 pc. 

2 pc. 


IVACT18 11 ml vial type CT-Borosilicate glass, crimps and 

stoppers separate 

IVACT19 11 ml vial type CT-Borosilicate glass, crimps and 

stoppers separate 

IVACT28 11 ml vial type CT-Borosilicate glass, crimped, 

evacuated 

IVACT29 11 ml vial type CT-Borosilicate Glass, crimped 

evacuated, labelled 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

IVACT20 13 mm Spare crimps and stoppers for IVACT29 1000 pc. 

of each 

Fig. 55: 11 ml Borosilicate Vial round bottom with cap 

(IVACT18 and IVACT28) 

43 / 65



IVA948W 4.5 ml Borosilicate vial, round bottomed, white cap, 

non evacuated, no label 

IVA949W 4.5 ml Borosilicate vial, round bottomed white cap, 

labelled, non evacuated 

Fig. 56: 4.5 ml Borosilicate vial round bottomed, 

white cap (IVA948W and IVA048W) 


evacuated, no label 


labelled, evacuated 

Fig. 57: 4.5 ml Borosilicate vial, round bottom with cap, 

labelled (IVA949W and IVA049W) 

IVA938W 12 ml Borosilicate vial, round bottomed with cap, white 

with septum, non evacuated 


with septum, labelled, non evacuated 


with septum, evacuated 


with septum, labelled, evacuated 

Fig. 58: 12 ml Borosilicate vial, round bottom with cap 

(IVA938W and IVA038W) 

Fig. 59: 12 ml Borosilicate Vial, round bottom with cap, 

labelled (IVA939W and IVA039W) 


1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

44 / 65



IVA9RK8W 12 ml vial type RK-Borosilicate glass, round bottomed, 

non-evacuated, white cap 


non-evacuated, labelled, white cap 


evacuated, white cap 


evacuated, labelled, white cap 


Fig.60: 12 ml vial, type RK-Borosilicate glass round bottom 

white cap (IVA738W and. IVA838W) 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 


IVA728W 3 ml vial type 2 soda glass, flat bottomed, non-evacuated, 

white cap 

IVA729W 3 ml vial type 2 soda glass, flat bottomed, non-evacuated, 

labelled, white cap 

IVA828W 3 ml vial type 2 soda glass, flat bottomed, evacuated, 

white cap 

IVA829W 3 ml vial type 2 soda glass, flat bottomed, evacuated, 


Fig.61: 3 ml vial type 2 soda glass, flat bottomed, no label, 

white cap (IVA728W and IVA828W) 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

45 / 65



IVA778W 3.7 ml vial type 7 soda glass, flat bottomed, nonevacuated, 

white cap 



IVA878W 3.7 ml vial type 7 soda glass, flat bottomed, evacuated, 

white cap 




Fig.62: 3.7 ml vial type 7 soda glass, flat bottomed, 

no label, white cap (IVA778W and IVA878W) 

Fig.63: 3.7 ml vial type 7 soda glass, flat bottomed, 

labelled, white cap (IVA779W and IVA879W) 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 



white cap 




white cap 

IVA819W 5.9 ml Vial type 1 soda glass, flat bottomed, evacuated, 


1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

46 / 65



IVA738W 12 ml Exetainer® vial type 3, soda glass, flat bottomed 

white cap, with septum, non evacuated 

IVA739W 12 ml Exetainer® vial, soda glass, flat bottomed white cap, 

with septum, non evacuated, labelled 


with septum, evacuated 


with septum, evacuated, labelled 


Fig.64: 12 ml Exetainer® vial, flat bottom, white cap no label 

(IVA738W and IVA838W) 

Fig. 65: 12 ml Exetainer® vial, flat bottom, white cap, 

labelled, with septum (IVA739W and IVA839W) 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 


IVA-VC300 16.5 mm caps, green, with septum 1.000 pc. 

IVA-VC301 16.5 mm caps, blue, with septum 1.000 pc. 

IVA-VC308 16.5 mm caps, red, with septum 1.000 pc. 

IVA-VC309 16.5 mm caps, white, with septum 1.000 pc. 

Additional vials and caps in different colours on request. Please contact us. 

47 / 65



IVA738W/W 12 ml Exetainer® vial type 3, soda glass, flat bottomed 

white cap, non evacuated, wide (1 mm +) 


white cap, non evacuated, labelled, wide (1 mm +) 


white cap, evacuated, wide (1 mm +) 


white cap, evacuated, labelled, wide (1 mm +) 



no label, wide (1mm +) (IVA738W/W and IVA838W/W) 


labelled, wide (1mm +) (IVA739W/W and IVA839WW) 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 


IVA778W/R 3.7 ml vial type 7R, soda glass, round bottomed, white 

cap, non evacuated, no label 

IVA779W/R 3.7 ml vial type 7R, soda glass, round bottomed white cap, 

non evacuated, labelled 

1.000 pc. 

1.000 pc. 

48 / 65



IVA878W/R 3.7 ml vial type 7R, soda glass, round bottomed, white 

cap, evacuated 

IVA879W/R 3.7 ml vial type 7R, soda glass, round bottomed white cap, 

evacuated, labelled 


Fig. 68: 3.7 ml vial, round bottomed, white cap, no label, 

(IVA778W/R and IVA878W/R) 

Fig. 69: 3.7 ml vial, round bottomed, white cap, labelled, 


1.000 pc. 

1.000 pc. 


IVA758W/R 5.9 ml Exetainer® vial type 5, soda glass, round bottomed 

white cap, non evacuated 


white cap, non evacuated, labelled 


white cap, evacuated 


white cap, evacuated, labelled 

Fig. 70: 5.9 ml vial, round bottomed, white cap, no label, 


Fig. 71: 5.9 ml vial, round bottomed, white cap, labelled, 


1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

49 / 65

20.2 Autosampler CTC / AS 2000 / AS3000 / TriPlus 


08090405 0.7 ml Crimp neck vial ND8, 40 x 7 mm, clear glass 1.000 pc. 

11090831 

Ref. 

24070005 

08090845 

Ref. 

24070010 

2.5 ml Crimp neck vial ND11, 41x11,6 mm, clear glass 1000 pc. 

1.2 ml Crimp neck vial ND8, 40 x 8,2 mm, clear glass 

(AS3000/AS3500) 


1.000 pc. 

08090305 0.7 ml Micro-vial ND8, conical 40 x 7 mm, clear glass 1.000 pc. 

08030249 

Ref. 

38606031 

Aluminium cap clear lacquered, 4 mm centre hole 

silicone white/PTFE red, Ultra Clean, 45° shore A 

thickness 1.3 mm 

08030451 Aluminium cap clear lacquered, 4 mm centre hole 

nat. rubber red-orange/TEF transparent, 60° shore A 


11090210 

Ref. 

24074041 

1.000 pc. 

1.000 pc. 

1.5 ml Screw neck ND8, 32 x 11,6 mm, clear glass 1.000 pc. 

08150886 8 mm PP Screw cap, black, silicone dark blue/PTFE 

white, 45° shore A, 1.3 mm, with hole (consisting of 

38606074 and 31303217) 

08150293 8 mm PP Screw cap, black silicone white/PTFE red, 

Ultra Clean, 45° shore A, 1.3 mm, 5.5 mm centre hole 

08150460 8 mm PP Screw cap, black, nat. rubber red-orange/TEF 

transparent, 60° shore A, thickness 1,3 mm 

05090968 0.1 ml Mico-insert, 28 x 5 mm, clear glass with 

assembled plastic spring 

Fig. 72: Fig.73: Fig. 74: Fig. 75: 

08090845 08090305 11090210 05090968 

1000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

50 / 65


The subsequent described vials and seals are suitable for liquid injection. 


11090500 1.5 ml Short thread vial ND9, 32 x 11.6 mm, clear glass 

wide opening 

11090519 

Ref. Code 

60180-723 

1.5 ml Short thread vial ND9, 32 x 11.6 mm, clear 

glass wide opening with label (for TriPlus / GC PAL) 


1.000 pc. 

1.000 pc. 

06090357 0.1 ml Micro-insert, 31 x 6 mm, clear glass, 15 mm top 1.000 pc. 


06090865 0.1 ml Micro-insert, 28 x 6 mm, clear glass, with 

assembled plastic 

1.000 pc. 

Fig. 76: Fig. 77: Fig. 78: Fig.: 79: Fig. 80: 

11090500 11090519 06090357 06090669 06090865 

06090866 0.2 ml Micro-insert, 31 x 6 mm, clear glass, flat bottom 1.000 pc. 

11090999 Short thread vial with integrated 0.2 ml micro-insert 

clear glass with label and filling lines 

11090620 1.1 ml Microliter short thread vial ND9, 32 x 11.6 mm 

clear glass 

11141189 TPX Short thread vial ND9, 32 x 11.6 mm with integrated 

0.2 ml glass micro-insert 

Fig.:81 Fig. 82: Fig. 83: Fig.: 84 

06090866 11090999 11090620 11141189 

1.000 pc. 

1.000 pc. 

1.000 pc. 

51 / 65




09150478 PP Short thread cap transparent, 6 mm centre hole 

nat. rubber red-orange/TEF transparent, 60°shore A 


09150481 PP Short thread cap transparent, 6 mm centre hole 



09150867 PP Short thread cap blue, 6 mm centre hole 



09150838 

Ref. Code 

60180-729 

PP Short thread cap blue, 6 mm centre hole 


thickness 1.0 mm (for TriPlus / GC PAL) 

09151176 PP Short thread cap red, 6 mm centre hole 



09151178 PP Short thread cap red, 6 mm centre hole 



08030884 

Ref. Code 

38606031 

08030599 

Alt. /Ref. 

38606031 

08080027 

Ref. Code 

38606074 

08020881 

Ref. Code 

31303217 

8 mm Aluminium cap clear lacquered, 4 mm centre hole 

silicone dark blue/PTFE white, 45° shore A 


Aluminium cap clear lacquered, 4 mm centre hole 

silicone blue transparent/PTFE white, 45° shore A 



1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1.000 pc. 

1000 pc. 

1000 pc. 

8 mm PP Screw cap, black, with hole 1000 pc. 

8 mm Septum, silicone dark blue/PTFE white, 45° shore A, 

1.3 mm 

1000 pc. 

52 / 65




11090356 1,5 ml Crimp neck vial ND11, 32 x 11,6 mm, clear glass 

wide opening 

1.000 pc. 

SA5370492 Aluminium pans 5,5 x 2,5 mm 250 pc. 

Fig. 85: 11090356 


Fig. 86: Aluminium weighing pans 5.5 x 2.5 mm (SA5370492) 

suitable for short thread ND9 and crimp neck vial ND11 



06090865 0.1 ml Micro-insert, 28 x 6 mm, clear glass, with assembled 

plastic 

1.000 pc. 

06090866 0.2 ml Micro-insert, 31 x 6 mm, clear glass, flat bottom 1.000 pc. 

11090921 Crimp neck vial ND11 with integrated 0.2 ml micro-insert 

32 x 11,6 mm, clear glass with labelling and filling lines 

1.000 pc. 

11090619 1.1 ml Microliter-vial ND11, 32 x 11.6 mm, clear glass 1.000 pc. 

Fig. 87: 11090921 Fig. 88: 11090619 Fig. 89: 20090343 Fig. 90: 20100290 

11030247 Aluminium cap clear lacquered, 5.6 mm centre hole 

silicon white/PTFE red, Ultra Clean, 35° shore A 


1.000 pc. 

11030209 Aluminium cap clear lacquered, 5.6 mm centre hole 

nat. rubber red-orange/TEF transparent, 60° shore A, 


1.000 pc. 

20010408 Aluminium crimp seals, plain with 10 mm hole 1.000 pc. 

20100290 20 mm Butyl stoppers, grey (Fig. 90) 1.000 pc. 

20090343 100 ml Crimp neck Vial, clear, 3 rd hydrol. Class (Fig. 89) 88 pc. 

53 / 65

Solvent bottles: 


Part No. Ref. 

Code 


20090342 --- 5 ml Washing vial ND18, 38.2 x 22 mm 

round bottom, clear glass 

100 pc. 

22150712 --- 22 mm Washing cap, PE-cap, transparent 

22 x 8.4 mm, 4.3 mm hole, silicone blue 

transparent/PTFE white, 45° shore A 

thickness 1,3 mm for vial 20090342 

100 pc. 

IVA19014647 19014647 Kit Washing vials and washing caps Kit à 5 pc. 

20090795 24030000 10 ml Washing vial, 46 x 22.5 mm, clear glass 

DIN-crimp neck, long neck, flat bottom 

22151334 38606035 22 mm Washing cap, PE-cap, transparent 

22 x 9.2 mm, 4.3 mm hole, silicone blue 

transparent/PTFE white, 45° shore A 

thickness 1.3 mm for vial 20090795 

Fig. 91: 20090342 

Washing vial CTC 

Fig. 92: 22150712 

Washing cap CTC 


Fig. 93: 20090795 

Washing vial AS 2000 

Fig. 94: 22151334 

Washing cap AS 2000 


20091822 24014085 100 ml solvent bottle (TriPlus / GC PAL) 4 pc. 

Please note that this is only a small selection of the items that IVA 

does supply. Please contact us, if you do not find the product you 

are looking for. 

100 pc. 

100 pc 

54 / 65


21 CRIMPERS and DECAPPERS 


08060005 Crimper for 8 mm aluminium caps 1 pc. 




08070001 Decapper for 8 mm aluminium caps 1 pc. 




easy and convenient handling 

chemically resistant surface finish especially designed for the application in 

labs 

hardened crimping jaws made of a special alloy that guarantees long life 

adjustable in crimping pressure by a screw in the handle 

additionally 11 mm, 13 mm and 20 mm crimpers are adjustable in crimping 

height by screwing up or down the pressure block in the crimping head with a 

hexagon key 

Fig. 95: Crimper and decapper 

55 / 65


22 CALIBRATED MICROPIPETTES 

Calibrated micropipettes are precision-bore glass capillary tubes cut to predetermined 

length so that fill volumes are constant and precise. 


length 16 mm 

IVA1-000-0001 0,1 µl 1%, length 16 mm 100 pc. 

length 32 mm 



IVA1-000-0010 1 µl 1%, length 32 mm 100 pc. 



length 55 mm 

IVA1-000-0010-55 1 µl 1%, length 55 mm 100 pc. 





length 64 mm 

IVA1-000-0005-64 0,5 µl 1%, length 64 mm 100 pc. 

More pipettes on request. 

56 / 65


23 MICRO SPATULA / FORCEPS 

Fig. 96: Micro spatula for lefties and right hander 


IVA205-00600-25 20500600 Micro spatula for lefties 1 pc. 

IVA205-00600-25R 20500600 Micro spatula for right hander 1 pc. 

IVA5760203742 --- Micro doublespatula, length 150 mm 

Ø 1,8 mm, spatula breadth 3 mm, spatula 

length 40 mm, one side like a spoon 

other side straight 

More micro spatula on request. 

Fig. 97: Forceps (IVAHSC187-11 and IVAHSC819-10) 

1 pc. 


IVAHSC187-11 20500500 Forceps, length 115 mm 1 pc. 



IVAHSC819-10 --- Forceps for watchmakers, 

curved, simply type, 105 mm 

1 pc. 

57 / 65


24 SEALING DEVICES 

24.1 For solids 

Fig. 98: Sealing device for solids (IVA20500310) 

Part No. Ref Code Description Unit 

IVA20500310-25 20500310 

24010024 

Sealing device, complete set with 4-hole 

plate and pocket sample holder (suitable for 

capsules with max. Ø 5 mm) 

1 pc. 

IVA25209010 25209010 Sealing device for capsules with Ø 10 mm 1 pc. 

24.2 For liquids 

Our sealing device is developed for closing liquid capsules with different 

dimensions. 

Adapter for inertgas 

Fig. 99: Sealing device for liquids (IVA20503002) 

Part No. Ref Code Description Unit 

IVA-20503002 20503002 Sealing device for liquids 1 pc. 

58 / 65


25 CAPSULES 

25.1 Pressed Capsules 

25.1.1 Tin capsules for solids 

Fig. 100: Tin capsules for solids 

Part No. Ref. Code Diameter x Height, Purity Unit Min. Volume 

SA76980002 

76.9800.26 

24002600 3,2 x 4,0 mm, Sn 97,5 250 pc. 0,02 ml 

SA76980002L 24002600 3,2 x 4,0 mm, light, Sn 97,5 250 pc. 0,02 ml 

76.9802.26 24002700 3,2 x 6,0 mm, Sn 97,5 250 pc. 0,04 ml 

SA76980502 

76.9805.26 

24005300 3,3 x 5,0 mm, Sn 97,5 250 pc. 0,03 ml 


SA76980702 

76.9807.26 

24005305 4,0 x 6,0 mm, Sn 97,5 250 pc. 0,07 ml 


SA76980902 24006260 5,0 x 8,0 mm, Sn 97,5 250 pc. 0,12 ml 

SA76981102 

76.9811.26 

24006400 5,0 x 9,0 mm, Sn 97,5 250 pc. 0,15 ml 


SA76981302 

76.9813.26 

24006500 5,0 x 12,0 mm, Sn 97,5 250 pc. 0,22 ml 

SA76162401 25208000 10,0 x 10,0 mm, Sn 97,5 100 pc. --- 

Precleaned tin capsules (incl. tray): 

SA76980903 --- 5,0 x 8,0 mm, Sn 97,5 96 pc. 0,07 ml 

59 / 65


25. CAPSULES 

25.1.2 Tin foils 

Fig. 101: Tin foils (conical) 

Part No. Diameter x Height, Purity Unit 

SA76152301 

76.1523.00 

30,0 x 17,0 mm, Sn 97,5 100 sheets 

SA999990 Tin foil squares 35 x 35 mm 400 sheets 

SA999991 Tin foil squares 50 x 50 mm 450 sheets 

Tin foil squares 

35 x 35 mm 

25.1.3 Tin discs 

Fig. 102: Tin foils (conical) and tin discs 

Tin foil (conical) 

Tin disc 

Part No. Ref. Code Description, Diameter, Purity Unit 

SA999917 --- Tin disc, Ø 21 mm, Sn 97,5 100 sheets 

SA999901 --- Tin disc, Ø 28 mm, Sn 97,5 100 sheets 

SA999918 25208015 Tin disc, Ø 30 mm, Sn 97,5 100 sheets 



60 / 65

Attention: NEW in our assortment!!! 

Silver foil with thickness 0.01 mm and 

Gold foil with thickness 0.02 mm. 


25. CAPSULES 

Silver and gold foil at different dimensions can be made to order. Please contact us 

with your requirements. 

25.1.4 Silver capsules for solids 

Fig. 103: Silver capsules for solids 

Part No. Ref. Code Diameter x Hight, Purity Unit Min. Volume 

SA76980006 

76.9800.36 

SA76980206 

76.9802.36 

SA76980506 

76.9805.36 

SA76980706 

76.9807.36 

SA76981106 

76.9811.36 

NEW 

24005410 3,2 x 4,0 mm, Ag 99,99 250 pc. 0,02 ml 

24005450 3,2 x 6,0 mm, Ag 99,99 250 pc. 0,04 ml 

24055400 3,3 x 5,0 mm, Ag 99,99 250 pc. 0,03 ml 

24005400 4,0 x 6,0 mm, Ag 99,99 250 pc. 0,07 ml 

24005405 5,0 x 9,0 mm, Ag 99,99 250 pc. 0,15 ml 

SA76981306 --- 5,0 x 12,0 mm, Ag 99,99 250 pc. 0,23 ml 

SA76162406 --- 10 x 10 mm, Ag 99,99 100 pc. 0,8 ml 

61 / 65


25. CAPSULES 

25.1.5 Aluminium capsules for solids 


76.1308.81 24002100 3,2 x 4,0 mm, Al 99,0 100 pc. 0,02 ml 

76.1309.91E 24002200 3,0 x 5,0 mm, Al 99,0 100 pc. 0,03 ml 

76.9807.16 24002300 4,0 x 6,0 mm, Al 99,0 250 pc. 0,07 ml 

25.1.6 Store box for capsules 

Fig. 104: Store box for capsules (IVA9900006 and IVA677102) 


IVA99000096 Store box for 96 capsules, flat bottom 

base with cover (Fig. 104) 

(8 x 12 cavities for capsules with Ø 5 mm) 

IVA99000U96 Store box for 96 capsules, U-bottom 

base with cover 

IVA08291148 Sealmat block cover Silicone nat. / PTFE blue 

transparent with solids plugs, suitable for 96 store 

box, reusable 

Fig. 105: Sealmat,bottom side 

IVA677102 Store box for 48 capsules 

base with cover (Fig. 104) 

(Suitable for capsules with Ø 10 mm) 

1 pc. 

1 pc. 

1 pc. 

1 pc. 

62 / 65

NEW: Sorbits® 


25. CAPSULES 

25.2 Smooth Wall Capsules 

Fig. 106: Sorbits® d=3,5 mm (IVA502283), 100 pc. 

25.2.1 Tin capsules for liquids 

Fig. 107: Tin capsules for liquids 


84.9900.26 24007000 1,06 x 5,5 mm, Sn 99,9 250 pc. 0,003 ml 

84.9903.26 24008820 2,0 x 5,0 mm, Sn 99,9 250 pc. 0,012 ml 

84.9906.26 24008810 3,0 x 6,0 mm, Sn 99,9 250 pc. 0,025 ml 

84.9912.26 24009100 3,5 x 4,0 mm, Sn 99,9 250 pc. 0,03 ml 

84.9915.26 24009200 3,5 x 5,5 mm, Sn 99,9 250 pc. 0,04 ml 

84.9918.26 24009300 3,5 x 7,0 mm, Sn 99,9 250 pc. 0,06 ml 

84.9921.26 24007200 3,5 x 9,0 mm, Sn 99,9 250 pc. 0,07 ml 

84.9927.26 24004100 4,75 x 11,0 mm, Sn 99,9 250 pc. 0,15 ml 

84.9928.24 --- 5,0 x 13,0 mm, Sn 99,9 100 pc. --- 

84.9929.24 --- 6,0 x 15,0 mm, Sn 99,9 100 pc. --- 

84.9930.26 --- 6,75 x 14,0 mm, Sn 99,9 100 pc. 0,45 ml 

84.1544.00 -- 8,0 x 20,0 mm, Sn 99,9 100 pc. 0,98 ml 

63 / 65


25. CAPSULES 

25.2.2 Silver capsules for liquids 

Fig. 108: Silver capsules for liquids 


84.9903.36 24005100 2,0 x 5,0 mm, Ag 99,99 250 pc. 0,012 ml 

84.9912.36 24001200 3,5 x 4,0 mm, Ag 99,99 250 pc. 0,025 ml 

84.9912.37 

NEW 

3,5 x 4,0 mm, Ag 99,99 

Thermal treatment 

-> improved sealing 

250 pc. 0,025 ml 

84.9915.36 24001300 3,5 x 5,5 mm, Ag 99,99 250 pc. 0,04 ml 

84.9921.36 24001400 3,5 x 9,0 mm, Ag 99,99 250 pc. 0,07 ml 

64 / 65


25. CAPSULES 

25.3 Boats 

25.3.1 Tin boats 

Fig. 109: Tin boats 

Part No. Length x Height x Width, 

Purity 

Unit Min. Volume 

76.9828.26 10,0 x 4,0 x 4,5 mm, Sn 97,5 250 pc. 0,11 ml 

76.9831.26 12,0 x 4,0 x 2,7 mm, Sn 97,5 250 pc. 0,12 ml 

25.3.2 Silver boats 

Fig. 110: Silver boats 

Part No. Length x Height x Width, 

Purity 

Unit Min. Volume 

76.9825.36 6,5 x 3,5 x 2,5 mm, Ag 99,999 250 pc. 0,04 ml 

76.9831.36 12,0 x 4,0 x 2,7 mm, Ag 99,999 250 pc. 0,11 ml 

99.AG1244 12,0 x 4,0 x 4,0 mm, Ag 99,999 100 pc. 0,12 ml 

You will find more capsules in our special catalogue “Capsules, Boats and Weighing 

Pans”. Please contact us, we will send it to you promptly or visit our homepage 

www.iva-analysentechnik.de, there you can download it. 

65 / 65

ELEMENTAL ANALYSIS 2012 IVA - IVA-Analysentechnik

Create successful ePaper yourself

Delete template?

Save as template?