ELEMENTAL ANALYSIS 2012 IVA - IVA-Analysentechnik

SilTite metal ferrules:
*This is a protected name and only for identification.
14. FERRULES and FITTINGS
Part No. Ref. Code Description Unit
IVA073450 --- MS Interface SilTite Kit (2 nuts & 10
ferrules) for column ID 0.25 mm
IVA073330 1241460 Replacement Ferrules for column
ID 0.25 mm
IVA073451 --- MS Interface SilTite Kit (2 nuts & 10
ferrules) for column ID 0.32 mm
IVA073331 1226600 Replacement Ferrules for column
ID 0.32 mm
1 Kit
10 pc.
1 Kit
10 pc.
IVA073230 1241440 Replacement Nuts 5 pc.
SGE has developed a metal ferrule specificially for use with fused silica GC columns.
Combining a specially designed ferrule and nut system, the SilTite ferrules must be
used in conjunction with this special nut that is supplied with the ferrules. The
geometry of the ferrule and nut combination makes it possible to swage the end of
the ferrule to the fused silica tubing. This creates a leak-free seal that never needs
re-thigtening – even after 400 temperature cycles between 70 °C and 400 °C.
Constructed from identical material, the ferrule and nut expand and contract at the
same rate as the oven temperature heats up and cools down.
The SilTite ferrule fits into the
specificially designed SilTite nut.
This allows a perfect seal every
time with the MS interface.
Please note that this is only a small selection of the items of SGE, VICI
Valco and Swagelok that IVA supplies.
Please contact us, if you do not find the product you are looking for.
36 / 65