CPD W2 en.indd - KS-Audio
CPD W2 en.indd - KS-Audio
CPD W2 en.indd - KS-Audio
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CPD</strong> <strong>W2</strong> the low bass<br />
with maximized performance<br />
The subwoofer for the discerning<br />
ear! In spite of its small stature,<br />
the <strong>CPD</strong> <strong>W2</strong> delivers a very<br />
deep, powerful yet clean, and<br />
dry sound. The speaker cabinet<br />
is a classic-refl ex design - 2x15”<br />
– driv<strong>en</strong> by a 1400Wrms PWM<br />
amplifi er and has performance of<br />
the highest quality.<br />
What makes the <strong>CPD</strong> <strong>W2</strong><br />
unique is the highly durable<br />
Long throw driver with a 100<br />
mm voice coil and reinforced<br />
cone, plus a directivity for frequ<strong>en</strong>cies<br />
in the range of 40Hz:<br />
the 2 Bass refl ex op<strong>en</strong>ings<br />
have a large expon<strong>en</strong>tial<br />
cross-sectional contour<br />
that has particularly high<br />
effi ci<strong>en</strong>cy and minimal<br />
distortion through minor<br />
losses at the tunnel<br />
op<strong>en</strong>ings.<br />
The <strong>CPD</strong> <strong>W2</strong>’s small size<br />
makes it especially useful<br />
for v<strong>en</strong>ues where<br />
little space on the stage<br />
is available, or where it<br />
must be integrated into a<br />
stage-portal. With an M20<br />
threaded pole mount, the<br />
<strong>CPD</strong> <strong>W2</strong> becomes an ideal<br />
stand base for many of the<br />
<strong>KS</strong> <strong>CPD</strong> mid/hi cabinets,<br />
we recomm<strong>en</strong>d the <strong>CPD</strong><br />
10 or <strong>CPD</strong> 12, and this<br />
brings them to the ideal<br />
height.<br />
The <strong>CPD</strong> <strong>W2</strong> creates out<br />
of the Bass frequ<strong>en</strong>cies of<br />
the left and right channel,<br />
a summed, loss-free and<br />
highly effi ci<strong>en</strong>t Mono<br />
signal.<br />
The speaker cabinet<br />
construction is, like all <strong>KS</strong><br />
systems, built from birch<br />
plywood with an extremely<br />
robust charcoal colored<br />
Polyurethane coating.<br />
At your request the fi nish<br />
can be changed to any<br />
desired color from the RAL<br />
color charts<br />
<strong>CPD</strong> <strong>W2</strong><br />
<strong>KS</strong> Beschallungstechnik GmbH D - 67310 Hett<strong>en</strong>leidelheim Tel. 06351/44088 Fax. 06351/8355<br />
www.ks-audio.com e-mail info@ks-audio.de
Handholds, an M20 pole mount,<br />
and protective grill, with or without<br />
acoustic foam, are further<br />
features of this high-quality<br />
product. The rear mounted 2-way<br />
DSP-controller / PWM amplifi er<br />
operates very effi ci<strong>en</strong>tly without<br />
the need of a – sometimes distractingly<br />
loud - cooling fan. The<br />
FIR crossover and fi lter is specially<br />
matched to the driver, with<br />
corresponding compressors and<br />
limiters to <strong>en</strong>sure safe operation.<br />
The electronically balanced input<br />
is in the form of XLR F+M connectors.<br />
In addition to the power<br />
switch, the control panel also has<br />
a selectable digital volume / delay<br />
control to individually adjust<br />
for each v<strong>en</strong>ue and off ers a digital<br />
delay reaching up to 40 m for<br />
dec<strong>en</strong>tralized PA systems.<br />
The speaker cabinet construction<br />
is, like all <strong>KS</strong> systems, built from<br />
birch plywood with an extremely<br />
robust charcoal colored Polyurethane<br />
coating<br />
technical data <strong>CPD</strong> <strong>W2</strong><br />
frequ<strong>en</strong>cy range<br />
power capacity<br />
sound pressure level<br />
dispersion<br />
upper crossover frequ<strong>en</strong>cy<br />
driver<br />
amplifi er<br />
controller<br />
size (h/w/d)<br />
weight<br />
features<br />
With 2-Channel redundancy, the<br />
volume control allows for adjustm<strong>en</strong>t<br />
with a range of +/-9dB.<br />
Another special feature is the<br />
DSP Controller with its integrated<br />
Delay. Which allows On-site<br />
adjustm<strong>en</strong>t<br />
38-120Hz +-3dB (32Hz -6dB)<br />
1400W rms<br />
130dBcont 136dBpeak<br />
sphere<br />
120Hz<br />
2x 15”-cone, 4”-voice coil<br />
2x bridging mode PWM<br />
bal. inputs and outputs +4dBv<br />
820/440/660mm<br />
61kg<br />
M20 standfl ange, wheels<br />
or the creation of a focused<br />
directivity Bass-array without<br />
any additional equipm<strong>en</strong>t. The<br />
limiter prev<strong>en</strong>ts overloading and<br />
provides for frequ<strong>en</strong>cy response<br />
correction.<br />
All functions of the DSP controllers<br />
can be adjusted and controlled<br />
over the Ethernet network.<br />
The most important parameters<br />
are pres<strong>en</strong>ted on an LED display<br />
and can be adjusted directly on<br />
the unit.<br />
<strong>KS</strong> Beschallungstechnik GmbH D - 67310 Hett<strong>en</strong>leidelheim Tel. 06351/44088 Fax. 06351/8355<br />
www.ks-audio.com e-mail info@ks-audio.de