Bedienungsanleitung Pumpe _Rotguss u. Bronze_ mit Zeichnungen
Bedienungsanleitung Pumpe _Rotguss u. Bronze_ mit Zeichnungen
Bedienungsanleitung Pumpe _Rotguss u. Bronze_ mit Zeichnungen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5.3 Electrical<br />
Electric connexion only by specialists!!!<br />
The motor is featured with an IP 54 protection. The environmental temperature is only allowed until 40°C. The<br />
used line-cross section averages 5 x 2,5 mm².<br />
The serving electric circuit has to be protected by failure power-protection with a nominal current of IN < 30<br />
mA.<br />
Attention: Using of the pump for swimming-pools and their protected zone is only allowed, if they are<br />
installed after DIN/VDE 0100 component 702. Please ask your electric-specialist.<br />
6. First introduction<br />
Construction only use in filled pools. A dry run has to be avoided.<br />
6.1<br />
It has to be guaranteed that the current entry is inter<strong>mit</strong>tent.<br />
6.2<br />
The intake line and the pump charge slowly with clean water. Otherwise, the pump can not work as powerful as<br />
possible. Don´t let the pump run dry, nor for rotating direction control.<br />
6.3<br />
Before operation after longer downtime or storage time, please control for easy mobility. For this, delete the fan<br />
cover and move the fan towards the rotating direction. Fix the fan cover before starting the motor.<br />
6.4<br />
Please take care for opened shut-off units of the intake- and the pressure side, because the pump is not allowed to<br />
run by closed shut-off units.<br />
6.5<br />
ATTENTION<br />
ATTENTION<br />
ATTENTION<br />
ATTENTION<br />
ATTENTION<br />
Repair the current entry and start the pump.<br />
Stand: 09/07 Art. Nr.: 577086 Seite 22