LUBCON Basic program - eng - 2010-10-04 - Lubricant Consult GmbH

More documents

Recommendations

Info

Oils: ULTRATHERMOIL VG - line - fully synthetic - colour: clear/transparent - service temperature range: -60 °C to +300 °C - good viscosity-temperature behaviour - resistant to pressure, vacuum and radiation - chemically stable, non inflammable ® TURMOFLUID TTO 12 + TTO 24 - partly synthetic - colour: light-coloured/transparent - service temperature range: -50 °C to +100 °C - excellent viscosity-temperature behaviour Take-off of Ariane carrier rocket (ESA HQ, Paris Cedex) 26 6.0 6.1. Aviation and Space Flight Outstanding suitability for the lubrication of gears, rolling and -9 sliding bearings in vacuum pumps up to 10 mbar. Special hydraulic oils for applications at extremely varying temperatures or very low temperatures.
6.0 6.1. Aviation and Space Flight Greases: THERMOPLEX TTF 122 - fully synthetic - colour: olive-green - service temperature range: -70 °C to +150 °C ® TURMOGREASE Li AzR - fully synthetic - colour: beige - service temperature range: -55 °C to +120 °C - excellent corrosion and wearing protection ® TURMOPAST TAS - WT 000 CRY - mineral - colour: grey/black - service temperature range: -30 °C to +120 °C - good adhesive properties - metal affinity ULTRATHERM 2000 - fully synthetic - colour: white - service temperature range: -60 °C to +280 °C - chemically stable and pressure resistant - non-toxic and non-combustible - resistant to oxidation Sprays: ® TURMOLYB MDC - colour: grey/black - service temperature range: -180 °C to +450 °C - pressure resistant - extremely adhesive ® TURMOPAST TF - colour: white - service temperature range: -180 °C to +260 °C - pressure resistant - extremely adhesive Landing flap actuator system on the long-haul Airbus A 330/A 340 27 Suitable for the lubrication of rolling and sliding bearings in the aircraft construction. Particularly suitable for the use at extremely varying temperatures. Semifluid for the lubrication of control gears in landing flaps of the Airbus fleet. Meets the requirements according to ZFB 831. Approved by Liebherr Aerospace. Special grease containing solid lubricants for highly loaded sliding surfaces. Excellent high pressure and anticorrosion properties. Has proved successful over many years in the lubrication of rolling and sliding bearings as well as of seals in the ultra -9 vacuum range up to 10 mbar. MoS -containing dry bonded coating for the lubrication of 2 sealing rings, threads and sliding surfaces at low and high temperatures. PTFE dry bonded coating for the lubrication of sealing rings, threads and sliding surfaces at low and high temperatures.
Page 1 and 2: We have the solution... Reg.-Nr. 17
Page 3 and 4: Your Partner for the Lubrication of
Page 5 and 6: Table of contents 2.0 Group 2.0: Ho
Page 7 and 8: Alphabetic Index of the Basic Progr
Page 9 and 10: 1.0 1.1. Foodstuff Industry Greases
Page 11 and 12: 1.0 1.2. Textile Industry Greases:
Page 13 and 14: 1.0 1.3. Paper Industry Greases: ®
Page 15 and 16: 1.0 1.5. Chip Board Industry Oils:
Page 17 and 18: 1.0 1.6. Machine Tool Industry Grea
Page 19 and 20: 1.0 1.8. Vacuum and Nuclear Industr
Page 21 and 22: 2.0 Household Appliances Oils: ® T
Page 23 and 24: 4.0 Medical Devices Oils: ® TURMO
Page 25: 5.0 5.0 Valves and Fittings Gas fit
Page 29 and 30: 6.0 6.2. Road and Rail Engineering
Page 31 and 32: 7.0 7.0. Sprays for Different Appli
Page 33 and 34: Certificates 33
Page 35: ® The World of the LUBCON Lubrican

LUBCON Basic program - eng - 2010-10-04 - Lubricant Consult GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?