Page 1 ASME VIII-1 2010 SUMMARY OF CHANGES The 2010 ...
Page 1 ASME VIII-1 2010 SUMMARY OF CHANGES The 2010 ...
Page 1 ASME VIII-1 2010 SUMMARY OF CHANGES The 2010 ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ASME</strong> <strong>VIII</strong>-1 <strong>2010</strong> <strong>SUMMARY</strong> <strong>OF</strong> <strong>CHANGES</strong><br />
<strong>The</strong> <strong>2010</strong> Edition of this Code contains revisions in addition to the 2007 Edition with 2008 and<br />
2009 Addenda. <strong>The</strong> revisions are identified with the designation (10) in the margin and, as<br />
described in the Foreword, become mandatory 6 months after the publication date of the <strong>2010</strong><br />
Edition. To invoke these revisions before their mandatory date, use the designation "<strong>2010</strong> Edition"<br />
in documentation required by this Code. If you choose not to invoke these revisions before their<br />
mandatory date, use the designation "2007 Edition through the 2009 Addenda" in documentation<br />
required by this Code.<br />
<strong>The</strong> Record Numbers listed below are explained in more detail in "List of Changes in Record<br />
Number Order" following this Summary of Changes.<br />
Changes given below are identified on the pages by a margin note, (10), placed next to the<br />
affected area.<br />
Expression N in Column LV identifies changes which are not relevant for LV-calculation modules.<br />
<strong>Page</strong> Location Change (Record Number) LV<br />
xxv,<br />
xxvi<br />
List of Sections (1) Paragraph below "Addenda" editorially revised<br />
(2) Second paragraph below "Interpretations" editorially<br />
revised<br />
(3) Paragraph below "Code Cases" editorially revised<br />
N<br />
Foreword Ninth and eleventh paragraphs editorially revised N<br />
xxvii,<br />
xxviii<br />
Xxix Statement of Policy (1) In the third paragraph, last sentence added<br />
N<br />
on the Use of Code<br />
Symbols<br />
(2) Last paragraph deleted<br />
6 Table U-3 (1) Publication year of standards CP-189 and SNT-TC-1<br />
A each corrected to 2006 by errata (09-1335)<br />
(2) Revised (07-1873)<br />
N<br />
11, 13,<br />
14, 15<br />
UG-11 Last sentence added to subpara. (c)(5) (03-373) N<br />
UG-16 Subparagraph (b)(5)(d) revised (09-375) N<br />
UG-19 (1) "Common Elements" title revised to read "Common<br />
Element Design" and designated as (a)(1), and<br />
subsequent subparagraphs redesignated accordingly<br />
(08-1560)<br />
(2) Paragraph references in subpara. (a)(2) revised (08-<br />
1560)<br />
(3) Subparagraph (a)(3) revised in its entirety (08-1560)<br />
N<br />
21 Figure UG-28.1 (1) Illustrations (b), (e), and (f) revised (03-122)<br />
(2) Notes (1) and (3) revised (03-122)<br />
<br />
30-33 UG-33 (1) In subpara. (b), "Ds" revised to "Dss”, "L" revised to<br />
"Lc" and definition revised, and "Le" revised in its<br />
entirety (03-1229)<br />
(2) First paragraph in subpara. (f) revised in its entirety<br />
(03-1229)<br />
(3) Subparagraph (f)(1)(a), Step 9 revised in its entirety<br />
(03-1229)<br />
(4) Subparagraph (f)(1)(b), Step 5 revised in its entirety<br />
(03-1229)<br />
(5) Subparagraph (g) revised in its entirety (03-1229)<br />
<br />
Figure UG-33.1 Caption revised (03-1229) <br />
38-40 UG-36 Subparagraphs (b)(1), (c)(2)(a), and (c)(2)(c) revised<br />
(08-973)<br />
<br />
54 UG-45 Revised in its entirety (08-631)<br />
(Table UG-45 for min. nozzle thickness)
55 Table UG-45 Added (08-631) <br />
62 UG-79 Subparagraph (a) revised in its entirety (03-373) N<br />
63, 64 UG-80 (1) Subparagraph (b)(10) deleted and subsequent<br />
paragraph redesignated (08-837)<br />
74 UG-99<br />
(2) Subparagraph (c) added (08-837)<br />
Subparagraph (b) revised in its entirety (08-697) N<br />
76, 78 UG-100 Subparagraph (b) revised in its entirety (08-697) N<br />
UG-101 Subparagraph (j)(1) revised to delete reference to ASTM E<br />
8 (07-1873)<br />
N<br />
82-85 UG-116 Subparagraph (j)(1) revised in its entirety (08-1560) N<br />
UG-117 (1) Subparagraph (a)(3)(a) revised (09-265)<br />
(2) Seventh paragraph in subpara. (f) revised; footnote 41<br />
revised (09-265)<br />
N<br />
86 Figure UG-<br />
118<br />
Revised (08-23)<br />
N<br />
87 UG-120 Subparagraph (h) revised (08-1560) N<br />
93, 95 UG-129 (1) Subparagraphs (a)(3), (a)(5)(a), (a)(5)(c), and (a)(7)<br />
revised (06-1436)<br />
(2) Subparagraphs (a)(8) and (h) added (06-1436)<br />
N<br />
UG-131 Subparagraph (c)(3)(a) revised (07-488) N<br />
100 UG-133 (1) Subparagraph (g) revised (08-492)<br />
(2) Subparagraph (h) added (07-488)<br />
N<br />
101-104 UG-136 (1) Subparagraph (a)(11) added (07-488)<br />
(2) Subparagraph (c)(3) revised (07-1826)<br />
(3) Subparagraph (c)(4)(b)(5) added, and subsequent<br />
subparagraph redesignated (07-488)<br />
(4) Subparagraph (c)(4)(c) deleted (06-123)<br />
(5) Subparagraph (d)(2)(a) revised (06-123)<br />
(6) Subparagraphs (d)(2)(d) and (d)(2)(e) deleted and<br />
subsequent paragraphs redesignated (06-123)<br />
N<br />
105, 106 UG-137 (1) Subparagraph (c)(3) revised (07-1286)<br />
(2) Subparagraph (d)(2)(e) revised (09-271)<br />
N<br />
111,112 UW-2 Subparagraph (c) revised in its entirety (06-961) N<br />
126, UW-16 (1) In subpara. (a)(1), reference to UW-3(a)(4) corrected by N<br />
132, 133<br />
errata to read UW-(3)(d) (09-1782)<br />
(2) Subparagraphs (c)(2)(a), (c)(2)(c), and (c)(2)(d) revised<br />
to add "continuous" before "fillet weld" (09-47)<br />
(3) Subparagraphs (f)(3)(a)(6) and (f)(4) revised (08-708)<br />
(4) Subparagraphs (g)(2)(a) and (g)(2)(b)(2) revised (08-<br />
1360)<br />
Table UW-<br />
16.1<br />
Added (08-708)<br />
N<br />
134 Figure UW-<br />
16.2<br />
General Note revised (09-972)<br />
N<br />
136 Figure UW-<br />
16.3<br />
Revised (08-1360)<br />
N<br />
140 UW-20.7 Added (07-1190) N<br />
UW-21 In subpara. (h), "fillet" deleted by errata (09-402, 09-1335) N<br />
141 Figure UW- (1) General Note corrected from "t„" to "tmir," by errata (09- N<br />
21<br />
1782)<br />
(2) Illustration (4) corrected to include t, by errata(09-1335)<br />
N
146, UW-40 (1) Last sentence added to subpara. (a) (09-1832)<br />
N<br />
147<br />
(2) First sentence in subpara. (a)(8) revised (09-1832)<br />
166 Table UCS-<br />
23<br />
Grade P355GH added to Spec. No. SA/EN 10028-2 (09-203) N<br />
167, UCS-56 In subpara. (d)(2), "120°C" corrected by errata to "140°C" (09- N<br />
168<br />
1782)<br />
175, Table UCS- (1) P-No. 10A: In Note (4), "10°C" corrected by errata to "28°C" N<br />
176 56<br />
(09-1782)<br />
(2) P-No. 10C: In Note (4), "10°C" corrected by errata to<br />
"28°C" (09-1782)<br />
(3) P-No. 10F: In Note (2), "10°C" corrected by errata to<br />
"28°C" (09-1782)<br />
181 Figure UCS-<br />
66<br />
In Notes (2)(a) and (4), Grades P355GH added (09-203)<br />
N<br />
199 Table UNF-<br />
23.4<br />
UNS No. R56323 added to all Spec. Nos. (07-779)<br />
N<br />
202, UNF-79 (1) Subparagraph (a)(2)(d) deleted; subpara. (a)(2)(c) revised N<br />
203<br />
in its entirety (05-151)<br />
(2) Subparagraph (b) revised (05-151)<br />
Table UNF-79 General Note (b) revised (05-151) N<br />
Figure UNF-<br />
79<br />
Deleted (05-151)<br />
N<br />
207 Table UHA-<br />
23<br />
UNS No. S31277 deleted (09-1258)<br />
N<br />
212- UHA-44 (1) Subparagraph (a)(1)(d) deleted (05-151)<br />
N<br />
215<br />
(2) Subparagraph (b) revised (05-151)<br />
UHA-51 (1) Subparagraphs (a)(4)(b), (a)(4)(b)(2), and (a)(4)(b)(3)<br />
revised (07-871)<br />
(2) In subparas. (f)(4)(a) and (f)(4)(b), A9.12 revised to A9.3.5,<br />
with additional information provided (07-871)<br />
N<br />
Table UHA- (1) General Note (b) revised (05-151)<br />
N<br />
44<br />
(2) In Note (2), 120°C corrected to 140°C by errata (09-1782)<br />
Figure UHA-<br />
44<br />
Deleted (05-151)<br />
N<br />
232- UHT-6 In subpara. (b), "Grade A" added following the SA-645<br />
N<br />
234<br />
reference (09-281)<br />
UHT-17 In subpara. (b), "Grade A" added following the SA-645<br />
reference (09-281)<br />
N<br />
UHT-18 In subpara. (c), "Grade A" added following the SA-645<br />
reference (09-281)<br />
N<br />
237 UHT-28 In subpara. (b), "Grade A" added following the SA-645<br />
reference (09-281)<br />
N<br />
Table UHT-23 "Grade A" added to SA-645 (09-281) N<br />
238 UHT-56 In subpara. (e), "Grade A" added following the SA-645<br />
reference (09-281)<br />
N<br />
239 Table UHT-56 "Grade A" added to SA-645 (09-281) N<br />
241 UHT-82 In subpara. (d), "Grade A" following the SA-645 reference (09-<br />
281)<br />
N<br />
269 Table ULT-23 "Grade A" added to SA-645 (09-281) N<br />
293,<br />
295,<br />
296<br />
UHX-13.3 "Wt" added as nomenclature (05-484)
<strong>Page</strong> Location Change (Record Number)<br />
UHX-13.4 (1) Subparagraphs (a) and (c) revised to include text<br />
regarding tube-to-tubesheet joints (05-484)<br />
(2) Subparagraph (e) deleted and subsequent<br />
subparagraphs redesignated (05-484)<br />
299, 303 UHX-13.5.9 Subparagraph (b) added, and subsequent subparagraphs<br />
redesignated (05-484)<br />
304 UHX-13.5.12<br />
"Option 3" paragraph revised, and "Configuration a" and<br />
"Configurations b and c" paragraphs deleted (06-17)<br />
305 UHX-13.7.1 "Young's modulus" changed to "modulus of elasticity" in the<br />
third paragraph (05-484)<br />
311, 312 UHX-14.3 "Wt added as nomenclature (05-484) <br />
UHX-14.4 (1) Subparagraphs (b) and (d) revised to include text<br />
regarding tube-to-tubesheet joints (05-484)<br />
(2) Subparagraph (f) deleted and subsequent subparagraphs<br />
redesignated (05-484)<br />
314, 315 UHX-14.5.9 Subparagraph (b) added, and subsequent subparagraphs<br />
redesignated (05-484)<br />
316 UHX-14.5.11 Revised (06-17) <br />
317, 318 UHX-14.8 Added (05-484) <br />
UHX-15 Deleted (05-484) <br />
319 UHX-19.2.1<br />
(1) In subpara. (a), reference to UG-19(a)(1) revised to UG-<br />
19(a)(2) (08-1560)<br />
(2) In subpara. (1)), reference to UG-19(a)(2) revised to UG-<br />
UHX-19.3<br />
19(a)(3) (08-1560)<br />
"And/or" deleted, and "or both" added (08-1560) N<br />
(1) Last sentence added to subpara. (a)(5) (07-1800)<br />
(2) Nomenclature for E5W added in subpara. (b)(3) (07-1800)<br />
(3) Nomenclature for "Flange Load" revised to "Bolt Load" in<br />
subpara. (b)(4) (07-1800)<br />
(4) Nomenclature for Za and Zw added in subpara. (c)(4)<br />
<br />
325-334 UHX-20.2.1 (07-1800)<br />
(5) In subpara. (c)(10) in-text table added; subsequent intext<br />
table revised (07-1800)<br />
(6) In subpara. (c)(11), in-text table added (07-1800)<br />
(7) Subparagraph (c)(12) added, in-text table revised, and<br />
subsequent subparagraphs redesignated (07-1800)<br />
(1) Last sentence added to subpara. (a)(5) (07-1800)<br />
(2) Nomenclature for E5W added in subpara. (b)(3) (07-1800)<br />
(3) Nomenclature for "Flange Load" revised to "Bolt Load" in<br />
subpara. (b)(4) (07-1800)<br />
(4) Nomenclature for Za and Zw added in subpara. (c)(4)<br />
<br />
UHX-20.2.2<br />
(07-1800)<br />
(5) In subpara. (c)(10) in-text table added; subsequent intext<br />
table revised (07-1800)<br />
(6) In subpara. (c)(11), in-text table added, in-text table<br />
revised, and subsequent subparagraphs redesignated<br />
(07-1800)<br />
(7) Subparagraph (c)(12) added (07-1800)<br />
<br />
<br />
<br />
<br />
<br />
<br />
N
406,<br />
407<br />
UHX-20.2.3<br />
(1) Nomenclature for ESW added in subpara. (b)(3) (07-<br />
1800)<br />
(2) Nomenclature for Za and Zw added in subpara. (c)(3)<br />
(07-1800)<br />
(3) In subpara. (c)(9) in-text table added; subsequent intext<br />
table revised (07-1800)<br />
(4) In subpara. (c)(10), title revised, in-text table added,<br />
and subsequent subparagraphs redesignated<br />
(07-1800)<br />
Table UHX-<br />
20.2.1-1<br />
"Allowable" revised to "Allowed" (07-1800)<br />
Table UHX-<br />
20.2.2-1<br />
"Allowable" revised to "Allowed" (07-1800)<br />
<br />
Table UHX-<br />
20.2.3-2<br />
"Allowable" revised to "Allowed" (07-1800)<br />
<br />
Table UHX-<br />
20.2.3-3<br />
"Allowable" revised to "Allowed" (07-1800)<br />
<br />
341 Nonmandatory<br />
Introduct.<br />
Subparagraphs (b), (c), and (e) revised (09-1241)<br />
N<br />
343 UIG-7 First sentence revised (09-1241) N<br />
344 UIG-29 Last sentence added (09-1241) N<br />
359 UIG-95<br />
(1) Subparagraphs (a) and (c) revised (09-1241)<br />
(2) Subparagraph (d) revised (09-1241)<br />
N<br />
UIG-97 Subparagraph (c) revised (09-1241) N<br />
360 UIG-121 Revised to include visual examination (09-1241) N<br />
374,<br />
377<br />
1-4<br />
Subparagraph (f)(1)(d) revised to include "radians" in the<br />
last equation (08-805)<br />
<br />
382,<br />
383<br />
1-7 Subparagraphs (b), (b)(1)(c), and (c) revised (09-326)<br />
N<br />
388 1-10 Title revised and first paragraph added (08-973) N<br />
395<br />
400,<br />
401,<br />
406,<br />
407<br />
2-3<br />
2-5<br />
2-6<br />
2-7<br />
(1) Nomenclature for a added (06-1083)<br />
(2) Nomenclature for BS, BSC, and BSmax added (09-1174)<br />
(1) Subparagraph (d) revised (06-1083)<br />
(2) In subpara. (e), equations renumbered to accommodate<br />
the addition of eq. (3) in subpara. (d) (06-1083)<br />
Second and third paragraphs revised; last paragraph added<br />
(06-1083)<br />
Equations renumbered to accommodate the addition of eq.<br />
(3) in subpara. (d) (06-1083)<br />
<br />
<br />
454 12-2 Revised in its entirety (09-1461) N<br />
(1) Subparagraph (a)(1) deleted and subsequent<br />
N<br />
520 23-4<br />
paragraphs redesignated (09-115)<br />
(2) Subparagraph (b)(1) deleted and subsequent<br />
paragraphs redesignated (09-115)<br />
547 26-14.1.1 Spelling of "expansion" corrected by errata (09-1335) N<br />
548<br />
26-14.1.2<br />
(1) Figure references in subpara. (f) corrected by errata (09-<br />
1335)<br />
(2) Equation in subpara. (m)(3) corrected by errata (09-1335)<br />
N<br />
549 26-14.2.2<br />
Figure references in subpara. (h) corrected by errata (09-<br />
1335)<br />
N
<strong>Page</strong> Location Change (Record Number) N<br />
567 32-4 Equation (3) in subpara. (a) revised (09-1809) N<br />
587, 588 A-1 Revised (01-576) N<br />
590, 592 A-2 Revised (01-576) N<br />
A-3 Revised (01-576) N<br />
A-4 Revised (01-576) N<br />
A-5 Revised (01-576) N<br />
665, 666 Form U-1<br />
(1) Editorially revised<br />
(2) Table under section 19 revised (08-998)<br />
N<br />
667 Form U-1A<br />
(1) Editorially revised<br />
(2) Table under section 10 revised (08-998)<br />
N<br />
669, 670 Form U-2<br />
(1) Editorially revised<br />
(2) Table under section 19 revised (08-998)<br />
N<br />
671 Form U-2A<br />
(1) Editorially revised<br />
(2) Table under section 11 revised (08-998)<br />
N<br />
672 Form U-3<br />
(1) Editorially revised<br />
N<br />
674, 676,<br />
677<br />
Table W-3<br />
(2) Table under section 12 revised (08-998)<br />
(1) Note No. 13 editorially revised<br />
(2) Note No. 43 revised (08-998)<br />
(3)Note No. 53 revised (08-1560)<br />
696<br />
Nonmandatory<br />
Appendix DD<br />
Item 2 revised in its entirety (09-263)<br />
N<br />
726 Figure JJ-1.2-6 Revised (09-1058) N<br />
728 Form U-DR-1 Items 22 and 23 revised (08-843) N<br />
730 Form U-DR-2 Items 22 and 23 revised (08-843) N<br />
N<br />
N
<strong>ASME</strong> <strong>VIII</strong>-1 LIST <strong>OF</strong> <strong>CHANGES</strong> IN RECORD NUMBER ORDER<br />
Record Change<br />
Number<br />
01-576 Reconciled Nonmandatory Appendix A with Annex 4.0 of Section <strong>VIII</strong>-2, revised<br />
definitions of k and tube material tensile strength, added tensile strength ratio in<br />
the equation for L1 (test), and made editorial revisions.<br />
03-373 Revised UG-11(d) to include a sentence that compels the vessel manufacturer to<br />
be responsible for ensuring post forming heat treatment is conducted as<br />
required for parts that are supplied in a preformed condition by another<br />
organization. Revised UG-79(a) by deleting the phrase "by any process that will<br />
not unduly impair physical properties of the material."<br />
03-1229 Revised Fig. UG-28.1 and UG-33 to make the rules in UG-33 in line with the rules<br />
in UG-28 by clarifying that, when the cone-to-cylinder juncture is not a line-ofsupport,<br />
moment of inertia requirement in 1-8 need not be met provided the<br />
nominal thickness of the cone section is not less than the minimum required<br />
thickness of the adjacent cylindrical shell. When a knuckle is not provided, the<br />
reinforcement required of 1-8 shall be satisfied. When the cone-to-cylinder<br />
juncture, with or without a knuckle, is a line-of-support, rules in UG-33(f) shall<br />
be met (i.e., both moment of inertia and reinforcement requirements of 1-8 shall<br />
be met).<br />
05-151 Revised UNF-79, Table UNF-79, UHA-44, and Table UHA-44 to make heat<br />
treatment mandatory for cold formed swages, flares, and upsets in austenitic<br />
materials regardless of the extent of strain involved in the forming. Deleted Figs.<br />
UNF-79 and UHA-44 regarding dimensions for strain calculations for cold<br />
formed swages, flares, and upsets.<br />
Added tube-to-tubesheet joint load requirements to UHX-13 and UHX-14, and<br />
05-484<br />
deleted UHX-15.<br />
06-17 Added elastic—plastic mies for floating tubesheet heat exchangers.<br />
06-123 Deleted UG-136(c)(4)(c).<br />
06-961 Reformatted and revised UW-2(c) to restore the original intent of the requirements,<br />
improve clarity, and added limiting conditions under which ERW pipe may be<br />
used as the shell of an unfired steam Boiler.<br />
Added the maxinum holt spacing equation and the holt spacing correction factor to<br />
06-1083<br />
Mandatory Appendix 2.<br />
06-1436 Added UG-I29(g) to allow for all metric units that are needed by pressure relief<br />
device manufacturers and assemblers. Added example metric units to UG-129.<br />
Corrected UG-I31(b)(2) to read 125°F (50°C).<br />
07-488 Revised LJG-129(a) to incorporate Code Case 1945-4, Restricting Lift to Achieve<br />
Reduced Relieving Capacities of Full Lift, Nozzle Type, Flat Seated Safety and<br />
Safety Relief Valves.<br />
07-779 Added Grade 28 to Table UNF-23.4.<br />
07-871 Revised UHA-51(a)(4) to correct invalid paragraph reference. Revised UHA-<br />
51(a)(4)(b) for clarity and consistency. Revised UHA-51(t)(4)(a) and (b) to<br />
mandate pre-use testing of welding consumables be conducted utilizing the<br />
WPS to be used in production welding.<br />
07-1190 Added UW-20.7 to provide rules for clad tubesheets when the tubes are to be<br />
strength welded to the cladding.<br />
07-1800 Replaced the fixed tubesheet examples in UHX-20.2.<br />
Revised pressure relief device certification interval for UG-136(c)(3) and UG-<br />
07-1826<br />
137(c)(3) from 5 yr to 6 yr.<br />
07-1873 Revised Table U-3 to update "year of acceptable edition" for those standards that<br />
were reviewed. Deleted standards that are obsolete or not used from tables.<br />
Revised UG-101(j)(1) to delete the reference to<br />
ASTM E 8 (as recommended by SGM). Made other editorial corrections as noted.
08-23 Revised Fig. UG-118 and its associated General Note.<br />
08-492 Modified UG-133(g) to limit the use to compressible fluids.<br />
Revised UG-45 to clarify minimum nozzle neck thickness. Added new Table UG-<br />
08-631<br />
45.<br />
08-697 Revised UG-99(b) and UG-100(b) to provide rules for the exclusion of bolting<br />
materials from the materials used to determine the lowest ratio for the vessel.<br />
08-708 Added Table UW-16.1. Changed the minimum Fitting thickness in UW-<br />
16(f)(3)(a)(6) from <strong>ASME</strong> BI6.11, Class 3000, to that given in Table UW-16.I.<br />
Claritied UW-16(0(4) so that the thickness for fittings smaller than NPS 1 /2 (DN<br />
15) shall be Schedule 160 from Table 3 of <strong>ASME</strong> B16.11.<br />
08-805 Added unit in radians to equations in Mandatory Appendix 1, 1-4(f)(I)(d).<br />
08-837 Deleted UG-80(6)(10) and added UG-80(c).<br />
08-843 Revised U-DR-I and U-DR-2 by adding specific UG-22 loadings with a check box to<br />
indicate a requirement.<br />
Revised UG-36 and 1-10 to specify that 1-10 rules can be used in lieu of UG-<br />
08-973<br />
37 for all nozzle sizes.<br />
08-998 Harmonized Forms U-I (back), U-I A, 1.1-2, U-2 (back), U-3 nozzle tables, and<br />
Table W-3, Note (43) to clarify data entry requirements.<br />
Revised UW-16(g)(2)(a), UW-16(g)(2)(b)(2), and Fig. UW-16.3 to clarify the<br />
08-1360<br />
dimensions required.<br />
08-1560 Clarified the range of common element design temperatures permitted by UG-<br />
19(a)(3), added paragraph numbering to Common Element Design in UG-<br />
19(a)(1), renumbered the subsequent paragraphs, revised the affected<br />
paragraph references, and eliminated "and/or" in the related paragraphs.<br />
09-47 Revised UW-16(c)(2)(a), (b), (c), and (d) to clarify that the welds attaching a<br />
reinforcing element to the shell must be continuous.<br />
09-115 Removed the pressure limitations in Mandatory Appendix 23.<br />
09-203 Updated Table UCS-23 and Notes to Fig. UCS-66 with Curve B in the as-rolled<br />
condition and Curve D in the normalized condition.<br />
09-263 Revised UG-I 17(a)(3)(a), UG-l17(t), Nonmandatory Appendix DD, and Index.<br />
09-271 Clarified in UG-136(d)(2)(a) the pressure containing parts subject to a hydrostatic<br />
test, including the addition of a definition for the valve shell. Deleted existing<br />
UG-136(d)(2)(d) and (e). Renumbered existing paragraphs UG-136(d)(2)(f) and<br />
(g) as UG-136(d)(2)(d) and (e), respectively. Modified holder parts subject to the<br />
hydrostatic test requirements in UG-137(d)(2)(e).<br />
09-281 Added the Grade A designation for SA-645 in UHT-6(h), UHT-17(b), UHT-I8(c),<br />
Table UHT-23, UHT-28(b). UHT-56(e), Table UHT-56, UHT-82(d), and Table<br />
ULT-23.<br />
09-326 Refonnatted 1-7(b) and l-7(b)(1). Removed reference to I-7(c) in 1-7(b)(1)(c).<br />
Revised 1-7(c) for editorial improvements and clarification of NDE requirements.<br />
Revised UG-16(b)(5)(d) by deleting the 500 psi design requirement for tubing<br />
09-375<br />
thickness.<br />
09-402 Deleted the word "fillet" from UW-21(b).<br />
09-972 Revised reference in Fig. UW-16.2 from "UW-16(t)(3)(a)" to "UW-16(f)."<br />
09-1058 Revised Fig. JJ-I.2-6's UHA-51(d)(3) box to change "and" to "or."<br />
Revised the definition of the "holt spacing" term (B,) in Mandatory Appendix 2, 2-3<br />
09-1174<br />
(Notation).<br />
09-1241 Removed obligatory Code words, "shall" and "must" in the nonmandatory<br />
Introduction, and replaced them with "should." Added the word "naturally" in<br />
reference to the porous nature of graphite in subpara. (b) for clarity. Added<br />
specific ASTM references in UIG-7 so users could conduct appropriate testing.<br />
Added a rule in UIG-29 to provide a usable value for yield strength, needed in<br />
UHX-14.5.9(b) calculations, because graphite does not yield when stressed like<br />
metals. In UIG-95(a), dealing with visual examination, replaced the word
"inspected" by the more appropriate word "examined." Deleted from subpara.<br />
(c) an inappropriate word, "a," and changed the work inspector to personnel.<br />
Added a subpara. (d) to provide and additional needed examination. Made a<br />
very minor grammatical change noted in UIG-97(c). Added visual examination<br />
records to the list of those that must he maintained in UIG-121.<br />
09-1258 Deleted SA-312 and SA-479, UNS S31277 references in Table UHA-23.<br />
09-1335 Corrected by errata.<br />
09-1782 Corrected by errata.<br />
09-1461 Deleted the NDE personnel qualification and certification requirements for UT<br />
examiners from 12-2, and inserted a reference to those requirements in UW-54.<br />
Deleted Footnote 1 associated with the deleted text.<br />
09-1809 Revised eq. (3) in 32-4.<br />
09-1832 Revised UW-40.<br />
10-114 Corrected by errata.
<strong>ASME</strong> IID <strong>2010</strong> <strong>SUMMARY</strong> <strong>OF</strong> <strong>CHANGES</strong><br />
<strong>The</strong> <strong>2010</strong> Edition of this Code contains revisions in addition to the 2007 Edition with 2008 and<br />
2009 Addenda. <strong>The</strong> revisions are identified with the designation (10) or # in the margin and, as<br />
described in the Foreword, become mandatory 6 months alter the publication date of the<br />
<strong>2010</strong> Edition. To invoke these revisions before their mandatory date, use the designation<br />
"<strong>2010</strong> Edition" in documentation required by this Code. If you choose not to invoke these<br />
revisions before their mandatory date, use the designation "2007 Edition through the 2009<br />
Addenda" in documentation required by this Code.<br />
<strong>The</strong> Record Numbers listed below are explained in more detail in "List of Changes in Record<br />
Number Order" following this Summary of Changes.<br />
Changes given below are identified on the pages by a margin note, (10), placed next to the<br />
affected area, except that in stress tables, changes affecting the title, columns, or a large<br />
number of lines are identified by #.<br />
<strong>Page</strong> Location Change (Record Number)<br />
viii, ix List of Sections (1) Paragraph below "Addenda" editorially<br />
revised<br />
(2) Second paragraph below "Interpretations"<br />
editorially revised<br />
(3) Paragraph below "Code Cases" editorially<br />
revised<br />
N<br />
x, xi Foreword Ninth and eleventh paragraphs editorially<br />
revised<br />
N<br />
xii Statement of Policy on the (1) In third paragraph, last sentence added N<br />
Use of Code Symbols (2) Last paragraph deleted<br />
2 2.1 Subparagraph (d) revised (08-1529, 09-1091) N<br />
6-9 Table 1A, Lines 35 & 36 For Section <strong>VIII</strong>, Division 1, Carbon steel<br />
SA/EN 10028-3 P275NH added (06-267)<br />
Table 1A, Line 37 For Section XII, SA/EN 10028-3 P275NH<br />
22-<br />
25<br />
42-<br />
45<br />
46-<br />
49<br />
Table 1A, Line 10<br />
deleted (06-267)<br />
For <strong>VIII</strong>-1, for SA/GB 6654, Size/Thickness<br />
corrected by errata (09-593)<br />
<br />
Table 1A, Lines 13 & 17 For Sections I, III, <strong>VIII</strong>-1, and XII, for SA-299 A,<br />
Grade added (06-922)<br />
<br />
Table 1A, Lines 26 & 27 For I, <strong>VIII</strong>-1, and XII, SA-299 B added (06-922) <br />
Table 1A, Line 5 For I, III, and <strong>VIII</strong>-1, for 9Cr-lMo-V SA-182 F91,<br />
Note H3 deleted (08-1023)<br />
<br />
Table 1A, Line 6 For I and <strong>VIII</strong>-1, for SA-182 F91, Note H3<br />
deleted (08-1023)<br />
<br />
Table 1A, Lines 12-14 For I and <strong>VIII</strong>-1, for SA-335 P91 and SA-336<br />
F91, Note H3 deleted (08-1023)<br />
<br />
Table 1A, Line 17 For I, III, and <strong>VIII</strong>-1, for SA-387 91, Note H3<br />
deleted (08-1023)<br />
<br />
Table 1A, Line 18 For I and <strong>VIII</strong>-1, for SA-387 91, Note H3 deleted<br />
(08-1023)<br />
<br />
Table 1A, Line 14 For III and <strong>VIII</strong>-1, for 17Cr-4Ni-4Cu SA-564<br />
630, Note G8 deleted (09-646)<br />
<br />
Table 1A, Lines 15 & 16 For III, for SA-693 630 and SA-705 630, Note<br />
G8 deleted and Note G32 added (09-646)
Table 1A, Line For III and <strong>VIII</strong>-1, for SA-564 630, Note G8 deleted (09-<br />
17<br />
646)<br />
Table 1A, Lines For III, for SA-693 630, SA-705 630, and SA-564 630,<br />
18-22<br />
Note G8 deleted and Note G32 added (09-646)<br />
Table 1A, Lines For <strong>VIII</strong>-1 and XII, 17Cr-4Ni-6Mn SA-240 201-1, SA-666<br />
23-28<br />
201-1, SA-240 201-2, and SA-666 201-2 moved to<br />
pp. 78-81 (08-1529)<br />
Table 1A, Lines For <strong>VIII</strong>-1, 17Cr-7Ni SA-240 301 moved to pp. 78-81<br />
29 & 30<br />
(08-1529)<br />
Table 1A, Lines For <strong>VIII</strong>-1, for 18Cr-Ti SA-268 TP430Ti, Note G8 deleted<br />
39 & 40<br />
and Note G32 added (09-646)<br />
50-53 Table 1A, Lines For <strong>VIII</strong>-1 and XII, 26Cr-4Ni-Mo SA-240 329, SA-789,<br />
6-10<br />
and SA-790 moved to pp. 142-145<br />
Table 1A, Lines For <strong>VIII</strong>-1 and XII, 26Cr-4Ni-Mo-N SA-240, SA-789, and<br />
11-15<br />
SA-790 moved to pp. 142-145<br />
62-65 Table 1A, Line<br />
18<br />
For <strong>VIII</strong>-1 and XII, for 5Ni-1/4Mo SA-645 A, Grade added<br />
(08-1530)<br />
66-69 Table 1A, Lines For <strong>VIII</strong>-1, 27Ni-22Cr-7Mo-Mn-Cu-N SA-312 and SA-479<br />
7-12<br />
deleted (08-168)<br />
78-81 Table 1A, Lines For <strong>VIII</strong>-1 and XII, 17Cr-4Ni-6Mn SA-240 201-1, SA-666<br />
27-32<br />
201-1, SA-240 201-2, and SA-666 201-2 relocated<br />
from pp. 46-49 (08-1529)<br />
Table 1A, Lines For <strong>VIII</strong>-1, 17Cr-7Ni SA-240 301 relocated from pp. 46-<br />
33 & 34<br />
49 (08-1529)<br />
126- Table 1A, Line For <strong>VIII</strong>-1 and XII, for 23Cr-4Ni-Mo-Cu-N SA-240,<br />
129 20<br />
Nominal Composition revised (09-1710)<br />
130- Table 1A, Line For III, for 25Cr-5Ni-3Mo-2Cu SA-995 1B, Notes G7 and<br />
133 37<br />
H4 deleted (09-646, 09-745)<br />
138- Table 1A, Lines For I, 25Cr-20Ni-Cb-N SA-213 TP310HCbN added (06-<br />
141 34 & 35<br />
764)<br />
142- Table 1A, Lines For <strong>VIII</strong>-1 and XII, 26Cr-4Ni-Mo SA-240 329, SA-789,<br />
145 11-15<br />
and SA-790 relocated from pp. 50-53<br />
Table 1A, Lines For <strong>VIII</strong>-1 and XII, 26Cr-4Ni-Mo-N SA-240, SA-789, and<br />
16-20<br />
SA-790 relocated from pp. 50-53<br />
146 Table 1A (1) General Note (h) added (09-551)<br />
(2) Notes G7 and G8 deleted (09-646)<br />
(1) Note G35 and all of its cross-references replaced by<br />
General Note (h) (09-551)<br />
(2) Note H3 deleted (08-1023)<br />
147 Table 1A (3) Note H4 deleted (09-745)<br />
(4) In Notes - Time-Dependent Properties heading,<br />
cross-reference to General Note (f) added (09-2037)<br />
(5) Note T11 deleted<br />
166- Table 1B, Lines For III, <strong>VIII</strong>-1, and XII, for A96061 T651 SB-209, Note<br />
169 30 & 31<br />
W16 added (09-587)<br />
Table 1 B, For <strong>VIII</strong>-1 and XII, for T651 wld. SB-209, Note W16<br />
Line 35 added (09-587)
Table1B, For III, <strong>VIII</strong>-1, and XII, for T6 and T6 wld. SB-210, Note<br />
Lines 37&39 W16 added (09-587)<br />
170-<br />
173<br />
Table 1 B,<br />
Lines 2 & 4<br />
For III, <strong>VIII</strong>-1, and XII, for T651 and T651 wld. SB-211,<br />
Note W16 added (09-587)<br />
<br />
Table 1B,<br />
Lines 6 & 8<br />
For III, <strong>VIII</strong>-1, and XII, for T6 and T6 wld. SB-221, Note<br />
W16 added (09-587)<br />
<br />
Table 1B,<br />
Lines 14 & 16-<br />
25<br />
For III, <strong>VIII</strong>-1, and XII, for T6 and T6 wld. SB-241 SB-247,<br />
and SB-308, Note W16 added (09-587)<br />
<br />
174-<br />
177<br />
Table 1 B,<br />
Lines 4-8<br />
For III, <strong>VIII</strong>-1, and XII, C10200 H00 through H04 SB-152<br />
added (09-1643)<br />
<br />
Table 1B, Line<br />
21<br />
For III, <strong>VIII</strong>-1, and XII, C10400 H04 SB-152 added (09-<br />
1643)<br />
<br />
190-<br />
193<br />
Table 1 B,<br />
Line 29<br />
For III, <strong>VIII</strong>-1, and XII, for C71500 060 SB-466, Min.<br />
Tensile Strength revised (08-222)<br />
<br />
194-<br />
197<br />
Table 1 B,<br />
Line 18<br />
For III, <strong>VIII</strong>-1, and XII, for NO2200 Stress rel. SB-163,<br />
External Pressure Chart No. revised (09-1919)<br />
<br />
210-<br />
213<br />
Table 1 B,<br />
Lines 1-13<br />
For I, <strong>VIII</strong>-1, and XII, for N06230 Solution ann. SB-366, SB-<br />
435, SB-564, SB-572, SB-619, SB-622, and SB-626,<br />
stress values revised (08-1065)<br />
<br />
214-<br />
217<br />
Table 1B,<br />
Lines 17-24<br />
For I and <strong>VIII</strong>-1, for N06617 Annealed SB-166, SB-167, SB-<br />
168, and SB-564, Notes T17 and T18 added and<br />
corresponding stress values italicized (09-1410)<br />
<br />
218-<br />
221<br />
Table 1B,<br />
Lines 19 & 20<br />
(1) For I, N06690 Cold drawn/ann. SB-167 added (09-1835)<br />
(2) For <strong>VIII</strong>-1 and XII, three stress values revised (09-1835) <br />
262-<br />
265<br />
Table 1B,<br />
Lines 1-9<br />
For <strong>VIII</strong>-1, R56323 Annealed SB-265 28, SB-338 28, SB-<br />
348 28, SB-363 WPT28 and WPT28W, SB-381 F-28,<br />
SB-861 28, and SB-862 28 added (07-779, 09-1022)<br />
<br />
266 Table 1B General Note (g) added (09-551) <br />
267 Table 1B (1) Note H3 revised (09-1835)<br />
(2) In Notes - Time-Dependent Properties heading, crossreference<br />
to General Note (e) added (09-2037)<br />
(3) Note W16 added (09-587)<br />
<br />
268-<br />
322<br />
Table 2A Title revised (09-2037) N<br />
323 Table 2A General Note (e) added (09-551) N<br />
326-<br />
332<br />
Table 2B Title revised (09-2037) N<br />
326- Table 2B, Line For N04400 stress rel. SB-163, Note El deleted (09-1616) N<br />
328 17<br />
333 Table 2B (1) General Note (e) added (09-551)<br />
(2) Note El deleted (09-1616)<br />
N<br />
334-<br />
337<br />
Table 3, Lines<br />
2, 5 & 8<br />
For III, <strong>VIII</strong>-1, <strong>VIII</strong>-2, and XII, for Carbon steel SA-449 1,<br />
Type added (05-1302)<br />
<br />
Table 3, Line<br />
17<br />
For III, <strong>VIII</strong>-1, and XII, C-1/4Mo SA-574 4140 deleted (08-<br />
170)<br />
<br />
Table 3, Line<br />
35<br />
For III, <strong>VIII</strong>-1, and XII, for 1Cr-1/5Mo SA-574 4140,<br />
Nominal Composition revised (08-170)
36 Table 3 (1) General Note (j) added (09-551)<br />
(2) Note W6 redesignated as W5 and corresponding crossreference<br />
revised<br />
375 Table 4 General Note (f) added (09-551) N<br />
380- Table 5A, For Carbon steel SA-612, P-No. corrected by errata to read N<br />
383 Lines 33 & 34 10C (09-592)<br />
396- Table 5A, 17Cr-4Ni-4Cu SA-564 630, SA-693 630, AND SA-705 630 N<br />
399 Lines 1-3 ADDED (09-206)<br />
400- Table 5A, For 5Ni-1/4Mo SA-645 A, Grade added (08-1530) N<br />
403 Line 34<br />
416- Table 5A, For 18Cr-10Ni-Ti SA-965 F321H, Note G1 added by errata N<br />
419 Line 32<br />
424- Table 5A, For 23Cr-4Ni-Mo-Cu-N SA-240, Nominal Composition N<br />
427 Line 1<br />
revised (09-1710)<br />
Table 5A,<br />
Line 26<br />
25Cr-5Ni-3Mo-2Cu SA-240 255 added (03-1258) N<br />
432 Table 5A (1) General Note (e) added (09-551)<br />
(2) Note G16 redesignated as G1 and corresponding crossreferences<br />
revised<br />
(3) Note G15 and all of its cross-references replaced by<br />
General Note (e) (09-551)<br />
N<br />
434- Table 5B, For A96061 T651 SB-209, Note W4 added (09-587) N<br />
437 Lines 45 & 46<br />
438- Table 5B, For T6 SB-210 and SB-221, Note W4 added (09-587) N<br />
441 Lines 2 & 4<br />
Table 5B,<br />
Lines 6-9<br />
For T6 SB-241 and SB-308, Note W4 added (09-587) N<br />
Table 5B, For C61400 025 or 060 SB-169, Size/Thickness revised (09- N<br />
Line 27<br />
213)<br />
Table 5B,<br />
Line 28<br />
O25 or O60 SB-169 added (09-213) N<br />
Table 5B, For C70600 M20 or 025 SB-171, Size/Thickness revised N<br />
Line 30<br />
(09-213)<br />
Table 5B, For C71500 M20 or 025 SB-171, stress values for 275°C N<br />
Line 33<br />
through 375°C revised (09-213)<br />
450- Table 5B, For R50400 Annealed SB-265, SB-348, and SB-381, stress N<br />
453 Lines 24-26 values for 100°C through 325°C revised (09-601)<br />
Table 5B, For Smls. ann. and Wld. ann. SB-338, SB-861, and SB-862, N<br />
Lines 27-30 stress values for 100°C through 325°C revised (09-601)<br />
Table 5B, For R52400 Annealed SB-265, SB-348, and SB-381, stress N<br />
Lines 38-40 values for 100°C through 325°C revised (09-601)<br />
Table 5B, For SmIs. ann. and Wld. ann. SB-338, SB-861, and SB-862, N<br />
Lines 41-44 stress values for 100°C through 325°C revised (09-601)<br />
454- Table 5B, For R52402 Annealed SB-265, SB-338, SB-348, and SB- N<br />
457 Lines 1-5 381, stress values for 100°C through 325°C revised (09-<br />
601)<br />
Table 5B, For R53400 Annealed SB-265, SB-348, and SB-381, stress N<br />
Lines 6-8 values for 100°C through 325°C revised (09-601)
Table 5B, For Smls. ann. and Wld. ann. SB-338, SB-861, and SB-862, N<br />
Lines 9-12 stress values for 100°C through 325°C revised (09-601)<br />
458 Table 5B (1) General Note (e) added (09-551)<br />
(2) Note W4 added (09-587)<br />
N<br />
460, Table U, Carbon steel SA/EN 10028-3 P275NH added (06-267) N<br />
461 Lines 27 &<br />
28<br />
466, Table U, For SA-299 A, Grade added (06-922) N<br />
467 Lines 15 &<br />
19<br />
Table U,<br />
Lines 28 &<br />
29<br />
SA-299 B added (06-922) N<br />
478, Table U, 17Cr-4Ni-6Mn SA-240 201-1, SA-666 201-1, SA-240 201-2, N<br />
479 Lines 28-31 and SA-666 201-2 moved to pp. 490, 491 (08-1529)<br />
Table U,<br />
Line 32<br />
17Cr-7Ni SA-240 301 moved to pp. 490, 491 (08-1529) N<br />
480, Table U, 26Cr-4Ni-Mo SA-240 329, SA-789, and SA-790 moved to pp. N<br />
481 Lines 1-3 506, 507<br />
Table U, 26Cr-4Ni-Mo-N SA-240, SA-789, and SA-790 moved to pp. N<br />
Lines 4-6 506, 507<br />
486, Table U, For 5Ni-1/4Mo SA-645 A, Grade added (08-1530) N<br />
487 Line 1<br />
Table U, 27Ni-22Cr-7Mo-Mn-Cu-N SA-312 and SA-479 deleted (08- N<br />
Lines 17 &<br />
18<br />
168)<br />
490, Table U, 17Cr-4Ni-6Mn SA-240 201-1, SA-666 201-1, SA-240 201-2, N<br />
491 Lines 23-26 and SA-666 201-2 relocated from pp. 478, 479 (08-1529)<br />
Table U,<br />
Line 27<br />
17Cr-7Ni SA-240 301 relocated from pp. 478, 479 (08-1529) N<br />
502, Table U, For 23Cr-4Ni-Mo-Cu-N SA-240, Nominal Composition N<br />
503 Line 30 revised (09-1710)<br />
506, Table U, 25Cr-20Ni-Cb-N SA-213 TP310HCbN added (06-764) N<br />
507 Line 19<br />
Table U, 26Cr-4Ni-Mo SA-240 329, SA-789, and SA-790 relocated N<br />
Lines 28-30 from pp. 480, 481<br />
Table U, 26Cr-4Ni-Mo-N SA-240, SA-789, and SA-790 relocated from N<br />
Lines 31-33 pp. 480, 481<br />
510, Table U, C12300 H00 through H04 SB-152 added (09-1643) N<br />
511 Lines 27-31<br />
532, Table U, R56323 Annealed SB-265 28, SB-338 28, SB-348 28, SB- N<br />
533 Lines 6-13 363 WPT28 and WPT28W, SB-381 F-28, SB-861 28, and<br />
SB-862 28 added (07-779, 09-1022)<br />
536-<br />
539<br />
Table Y-1,<br />
Lines 27 &<br />
28<br />
Carbon steel SA/EN 10028-3 P275NH added (06-267) <br />
548-<br />
551<br />
Table Y-1,<br />
Lines 31 &<br />
35<br />
For SA-299 A, Grade added (06-922) <br />
552-<br />
555<br />
Table Y-1,<br />
Lines 1 & 2<br />
SA-299 B added (06-922)
580-<br />
583<br />
Table Y-1,<br />
Lines 8-11<br />
17Cr-4Ni-6Mn SA-240 201-1, SA-666 201-1, SA-240 201-2,<br />
and SA-666 201-2 moved to pp. 604-607 (08-1529)<br />
<strong>Page</strong> Location Change (Record Number)<br />
Table Y-1,<br />
Line 12<br />
17Cr-7Ni SA-240 301 moved to pp. 604-607 (08-1529) <br />
Table Y-1,<br />
Lines 13 & 14<br />
For 17Cr-7Ni-lAl SA-705 631, Nominal Composition revised<br />
(09-1091)<br />
<br />
Table Y-1,<br />
Lines 25-27<br />
26Cr-4Ni-Mo SA-240 329, SA-789, and SA-790 moved to pp.<br />
640-643<br />
<br />
Table Y-1,<br />
Lines 28-30<br />
26Cr-4Ni-Mo-N SA-240, SA-789, and SA-790 moved to pp.<br />
640-643<br />
<br />
592-<br />
595<br />
Table Y-1,<br />
Line 38<br />
For 5Ni-1/4Mo SA-645 A, Grade added (08-1530) <br />
596-<br />
599<br />
Table Y-1,<br />
Lines 8 & 9<br />
27Ni-22Cr-7Mo-Mn-Cu-N SA-312 and SA-479 deleted (08-168) <br />
604-<br />
607<br />
Table Y-1,<br />
Lines 27-30<br />
17Cr-4Ni-6Mn SA-240 201-1, SA-666 201-1, SA-240 201-2,<br />
and SA-666 201-2 relocated from pp. 580-583 (08-1529)<br />
<br />
Table Y-1,<br />
Line 31<br />
17Cr-7Ni SA-240 301 relocated from pp. 580-583 (08-1529) <br />
632-<br />
635<br />
Table Y-1,<br />
Line 24<br />
For 23Cr-4Ni-Mo-Cu-N SA-240, Nominal Composition revised<br />
(09-1710)<br />
<br />
640-<br />
643<br />
Table Y-1,<br />
Line 19<br />
25Cr-20Ni-Cb-N SA-213 TP310HCbN added (06-764) <br />
Table Y-1,<br />
Lines 28-30<br />
26Cr-4Ni-Mo SA-240 329, SA-789, and SA-790 relocated from<br />
pp. 580-583<br />
<br />
Table Y-1,<br />
Lines 31-33<br />
26Cr-4Ni-Mo-N SA-240, SA-789, and SA-790 relocated from<br />
pp. 580-583<br />
<br />
696-<br />
699<br />
Table Y-1,<br />
Lines 42-44<br />
R56323 Annealed SB-265 28, SB-338 28, and SB-348 28<br />
added (07-779, 09-1022)<br />
<br />
700-<br />
703<br />
Table Y-1,<br />
Lines 1-5<br />
Annealed SB-363 WPT28 and WPT28W, SB-381 F-28, SB-861<br />
28, and SB-862 28 added (07-779, 09-1022)<br />
<br />
709 Table TE-1 Under 8Ni and 9Ni Steels, all values for 500°C through 550°C<br />
added (08-535)<br />
<br />
711 Table TE-1 (1) Under Austenitic Stainless Steels (Group 3), 15 values<br />
revised and all values for 775°C through 825°C added (08-<br />
533)<br />
(2) Under Ductile Cast Iron, 13 values revised and all values for<br />
575°C through 625°C deleted (08-529)<br />
<br />
712 Table TE-1 (1) References to Note (5) deleted (09-1008)<br />
(2) Under Condition 1150, 15 values revised and all<br />
values for 325°C through 550°C added (08-537)<br />
<br />
713 Table TE-1 Note (5) deleted (09-1008) <br />
716 Table TE-4 (1) Under NO2200 and NO2201, 13 values revised and all<br />
values for 800°C and 825°C deleted (08-531)<br />
(2) Under N04400 and N04405, all coefficient A values added,<br />
15 coefficient B and C values revised, and all values for<br />
775°C through 825°C added (09-1257)<br />
(3) Under N06002, 22 values revised (08-531)<br />
<br />
717 Table TE-4 (1) Under N06007, 26 values revised (08-531)<br />
(2) Under N06022, 28 values revised and all values for 775°C<br />
through 825°C added (08-531)
<strong>Page</strong> Location Change (Record Number)<br />
718 Table<br />
TE-4<br />
719 Table<br />
TE-4<br />
721 Table<br />
TE-4<br />
723 Table<br />
TE-4<br />
724 Table<br />
TE-4<br />
725 Table<br />
TE-5<br />
730 Table<br />
TCD<br />
734 Table<br />
TCD<br />
736 Table<br />
TCD<br />
738 Table<br />
TM-1<br />
739 Table<br />
TM-1<br />
742 Table<br />
TM-4<br />
743 Table<br />
TM-5<br />
(3) Under N06030, 22 values revised and all values for 725°C<br />
through 775°C added (08-531)<br />
(1) Under N06045, all coefficient A and C values added and Tour<br />
coefficient B values revised (08-531)<br />
(2) Under N06059, all values for 575°C added (08-531)<br />
(3) N06686 added (09-1006)<br />
(1) Under N06455, 15 coefficient A values revised, 3 coefficient B<br />
values revised, and all values for 775°C through 825°C added<br />
(08-531)<br />
(2) Under N06600, 17 coefficient A values revised, 2 coefficient B<br />
values revised, and 1 coefficient C value revised (08-531)<br />
(3) Under N06625, 11 coefficient A values revised, 2 coefficient B<br />
values revised, and 1 coefficient C value revised (08-531)<br />
Under N08031, 16 values revised, and all values for 575°C and<br />
600°C added (08-531)<br />
(1) Under N10242, 28 values revised, and all values for 775°C<br />
through 825°C added (08-531)<br />
(2) Under N10276, 10 coefficient A values revised, 1 coefficient B<br />
value revised, and all values for 775°C through 825°C added (08-<br />
531)<br />
(3) Under N10629, all values for 600°C and 625°C added (08-531)<br />
(1) Under N10665, 15 coefficient A values revised, 1 coefficient B<br />
value revised, 1 coefficient C value revised, and all values for<br />
775°C through 825°C added (08-531)<br />
(2) Under N12160, all values for 775°C through 825°C added (08-<br />
531)<br />
Grade 28 added (07-779, 09-1022) <br />
N06686 added (09-1006) N<br />
Grade 28 added (07-779, 09-1022) N<br />
Notes (5) and (6) revised (08-1071) N<br />
Material Groups H, I, and J added (09-1042, 09-1683, 09-1684) <br />
Notes (14), (15), and (16) added (09-1042, 09-1683, 09-1684) <br />
N06686 added (09-1006) <br />
(1) Under Titanium Alloys, Grade 28 (R56323) added (07-779, 09-<br />
1022)<br />
(2) Under Zirconium Alloys, values revised (09-1041)<br />
(3) General Note added (09-1041)<br />
750 Fig. CS-1 Values for E revised (09-934) <br />
Fig. CS-2 Values for E revised (09-934) <br />
751 Fig. CS-3 (1) Caption revised (09-934)<br />
<br />
Fig. CS-4<br />
(2) Three values for 5), revised (09-934)<br />
Values for E revised (09-934)
752 Fig. CS-5 Values for E revised (09-934) <br />
Fig. CS-6 Values for E revised (09-934) <br />
<strong>Page</strong> Location Change (Record Number) <br />
753 Fig. HT-1 Values for E revised (09-934) <br />
Fig. HT-2 Value for E revised (09-934) <br />
754 Fig. HA-1 Values for E revised (09-934) <br />
Fig. HA-2 Values for E revised (09-934) <br />
755 Fig. HA-3 Values for E revised (09-934) <br />
Fig. HA-4 Values for E revised (09-934) <br />
756 Fig. HA-6 Values for E revised (09-934) <br />
757 Fig. HA-7 Values for E revised (09-934) <br />
758 Fig. HA-8 Values for E revised (09-934) <br />
Fig. CI-1 Values for E revised (09-934) <br />
759 Fig. CD-1 Values for E revised (09-934) <br />
Fig. NFA-1 Values for E revised (09-934) <br />
760 Fig. NFA-2 Values for E revised (09-934) <br />
761 Fig. NFA-3 Values for E revised (09-934) <br />
762 Fig. NFA-4 Values for E revised (09-934) <br />
763 Fig. NFA-5 Value for E revised (09-934) <br />
Fig. NFA-6 Values for E revised (09-934) <br />
764 Fig. NFA-7 Values for E revised (09-934) <br />
Fig. NFA-8 Values for E revised (09-934) <br />
765 Fig. NFA-9 Value for E revised (09-934) <br />
Fig. NFA-10 Value for E revised (09-934) <br />
766 Fig. NFA-11 Value for E and three values for YS revised (09-934) <br />
Fig. NFA-12 Values for E revised (09-934) <br />
767 Fig. NFA-13 Values for E revised (09-934) <br />
Fig. NFC-1 Value for E revised (09-934) <br />
768 Fig. NFC-2 Value for E revised (09-934) <br />
Fig. NFC-3 Values for E revised (09-934) <br />
769 Fig. NFC-4 Values for E revised (09-934) <br />
Fig. NFC-5 Values for E revised (09-934) <br />
770 Fig. NFC-6 Values for E revised (09-934) <br />
Fig. NFC-7 Values for E revised (09-934) <br />
771 Fig. NFC-8 Values for E revised (09-934) <br />
Fig. NFN-1 Values for E revised (09-934)
772 Fig. NFN-2 Values for E revised (09-934) <br />
Fig. NFN-3 Values for E revised (09-934) <br />
773 Fig. NFN-4 Values for E revised (09-934) <br />
Fig. NFN-5 Values for E revised (09-934) <br />
774 Fig. NFN-6 Values for E revised (09-934) <br />
<strong>Page</strong> Location Change (Record Number)<br />
Fig. NFN-7 Values for E and one temperature revised (09-934) <br />
775 Fig. NFN-8 Values for E revised (09-934) <br />
Fig. NFN-9 Revised in its entirety (09-1812) <br />
776 Fig. NFN-10 Values for E and one temperature revised (09-934) <br />
Fig. NFN-11 Values for E revised (09-934) <br />
777 Fig. NFN-12 Values for E revised (09-934) <br />
Fig. NFN-13 Values for E revised (09-934) <br />
778 Fig. NFN-15 First value for E revised (09-934) <br />
779 Fig. NFN-16 Values for E revised (09-934) <br />
780 Fig. NFN-18 Third value for E revised (09-934) <br />
781 Fig. NFN-21 Two values for E revised (09-934) <br />
782 Fig. NFN-22 Values for E revised (09-934) <br />
Fig. NFN-23 Revised in its entirety (09-1261) <br />
783 Fig. NFN-24 Values for E revised (09-934) <br />
Fig. NFN-25 Values for E revised (09-934) <br />
784 Fig. NFN-26 Values for E revised (09-934) <br />
785 Fig. NFT-1 Values for E revised (09-934) <br />
786 Fig. NFT-2 Values for E revised (09-934) <br />
Fig. NFT-3 Values for E revised (09-934) <br />
787 Fig. NFT-4 Values for E revised (09-934) <br />
Fig. NFT-5 Values for E revised (09-934) <br />
788 Fig. NFZ-1 Values for E revised (09-934) <br />
789 Fig. NFZ-2 Values for E revised (09-934)
790 Notes to Figures Former Notes (14), (8), (9), (10), (12), and (13)<br />
renumbered as (1), (5), (6), (7), (8), and (9),<br />
respectively, and corresponding cross-<br />
references revised<br />
820 Table NFN-9 Revised in its entirety (09-1812) <br />
830 Table NFN-23 Revised in its entirety (09-1261) <br />
861 A-120 Added (08-1071) N<br />
868 A-454 Added (09-1041) N<br />
<strong>ASME</strong> IID LIST <strong>OF</strong> <strong>CHANGES</strong> IN RECORD NUMBER ORDER<br />
Record Change<br />
Number<br />
03-1258 Added stress line for UNS 532550 for Section <strong>VIII</strong>. Division 2 application in Table 5A.<br />
05-1302 Added "1" to the Type/Grade colutnn in Table 3 for SA-449.<br />
06-267 Added stress lines for SA/EN 10028-3 P275NH with thickness 100 mm to 150 mm and 150<br />
mm to 250 mm in Tables IA, U, and Y-1.<br />
06-764 Revised Tables I, U, and Y-1 to add allowable stress, ultimate tensile strength, and tensile<br />
strength values for SA-213 31 OHCbN (UNS S31042).<br />
06-922 Added stress values for SA-299 in Tables 1A, U, and Y-1.<br />
07-779 Added Grade 28 to Tables IB, U. Y-I, and the physical properties tables.<br />
08-168 Deleted SA-312 and SA-479 UNS 531277 stress lines in Tables 1A, U, and Y-1.<br />
08-170 Deleted a duplicate stress line for SA-574 UNS G41400 and revised an existing line in Table<br />
3.<br />
08-222 Tensile strength for SB-466 C7I5000 annealed (060) temper in Table 1B changed from 345<br />
MPa to 360 MPa.<br />
08-529 Revised coefficient A and B values for ductile cast iron in Table TE-I. Reduced range of<br />
metric values to correspond to customary values and available data.<br />
08-531 Provided missing coefficient A values for NO2200, N04400, N06002, N06007, N06022,<br />
N06030, N06045, N06059, N06455, N06600, N06625, N08031, N 10242, N10276,<br />
N10629, N10665, and N12160 in Table TE-4.<br />
08-533 <strong>The</strong>rmal expansion data for stainless steels group 3 revised slightly.<br />
08-535 Coefficient of thermal expansion values provided for 500°C to 550°C for 8Ni and 9Ni steels<br />
in Table TE-1.<br />
08-537 New thermal expansion values provided for 17-4 H1150.
08-1023 Deleted Note H3 from Table 1A.<br />
08-1065 Revised UNS N06230 stress values in Table IB.<br />
08-1071 Removed interpolated TD values from footnotes 5 and 6 of Table TCD and added note on<br />
intluence of magnetic transition to Appendix A.<br />
08-1529 Changed sort order for 17Cr-4Ni-6Mn (UNS S<strong>2010</strong>0) and 17Cr-7Ni (UNS S30100) stress<br />
lines in Tables 1A, U. and Y-1. Amended the sort-order guidance in "Guideline on<br />
Locating Materials in Stress Tables, and in Tables of Mechanical and Physical<br />
Properties."<br />
08-1530 Added Grade A designation to the SA-645 stress line in Tables IA, 5A, U, and Y-1.<br />
09-206 Added UNS SI7400 stress lines to Table 5A.<br />
09-213 Corrected Table 5B to fix size breaks (SB-169 C61400 and SB-171 C70600), to add a stress<br />
line for a size break that was omitted (SB-169 C61400), and to con-ect allowable stress<br />
entries at some temperatures (SB-171 C7I500).<br />
09-551 Added a general note to Table IA for clarification of the applicability of Appendix A; Note<br />
G35 deleted from Table 1A and Note G15 deleted from Table 5A.<br />
09-587 Note W16 and references added to Table 1B: Note W4 and references added to Table 5B.<br />
09-592 Corrected the P-No. designation for SA-612 from P-No. 1 to 10C in Table 5A.<br />
09-593 Corrected the size breaks for SA/GB 6654 I6MnR in Table I A.<br />
09-601 Revised stress values for titanium alloys UNS R50400, R52400, R52402, and R53400 in<br />
Table 5B.<br />
09-646 Deleted Notes G7 and G8 from Table 1A. Replaced all references to G7 and G8 within Table<br />
IA with Note G32.<br />
09-745 Deleted Note H4 reference from SA-995 Grade IB stress line in Table IA. Deleted Note H4<br />
from the Notes to Table 1A.<br />
09-934 (1) Revised significant digits for E in Figs. CS-1 through CS-6, HT-1, HT-2, HA-1 through<br />
HA-4, HA-6 through HA-8, CI-I, CD-I, NFA-1 through NFA-13, NFC-I through NFC-8,<br />
NFN-1 through NFN-8, NFN-I0 through NFN-13, NFN-15, NFN-16, NFN-18, NFN-21<br />
through NFN-26, NFT-1 through NFT-5, NFZ-I, and NFZ-2.<br />
(2) Revised Fig. CS-3 yield strength values in title and curves.<br />
(3) Revised Fig. NFA-I 1 yield strength values.<br />
(4) Revised 100°C to 95°C in Figs. NFN-7 and NFN-10.<br />
09-1006 Physical property data for UNS N06686 material added.<br />
Record<br />
Number<br />
Change<br />
09-1008 Note (5) deleted from Table TE-I.<br />
09-1022 Added stress lines for Grade 28 (UNS R56323) in Tables IB, U. and Y-I and physical<br />
properties data in Tables TCD and TM-5.<br />
09-1041 Revised elastic modulus values for Zr alloys in Table TM-5 and added note on anisotropy.<br />
09-1042 Elastic modulus property data provided for duplex stainless steels.<br />
09-1091 Corrected the nominal composition for Grade 631 (UNS 517700) in Table Y-1.<br />
09-1257 Revised thermal expansion values for UNS N04400 and N04405 in Table TE-4.<br />
09-1261 Corrected Fig. NFN-23 and Table NFN-23 for cold worked alloy UNS N08800.<br />
09-1410 Added T-note references and italics to values controlled by time-dependent<br />
properties for UNS N06617 in Table 1B.<br />
09-1616 Deleted Note EI from stress line for UNS N04400 and the Notes to Table 2B.<br />
09-1643 Added HO0, HOI, H02, H03, and H04 tempers for SB-152 UNS C10200 in Table<br />
1B. Added 1-104 temper for SB-152 UNS C10400 in Table 1B. Added H0O,<br />
HOI, H02, H03, and H04 tempers for SB-152 UNS C12300 in Table U.<br />
09-1683 Added elastic modulus data for high-Mo stainless steels in Table TM-1.<br />
09-1684 Added modulus data for high-silicon stainless steels in Table TM-1.<br />
09-1710 Revised the nominal composition for SA-240 UNS S32304 to "23Cr-4Ni—Mo—<br />
Cu—N" in Tables 1A, 5A, U, and Y-1.<br />
09-1812 Fig. NFN-9 and Table NFN-9 revised in their entirety.<br />
09-1835 (1) Revised SB-167 stress line to allow use of the material for Section I
construction from —30°C up to and including 649°C in Table IB.<br />
(2) Added applicable Notes H3, T11, and T12 in the Notes column of Table 1B.<br />
(3) Revised Note H3 in Table 1B.<br />
09-1919 Reassigned extemal pressure chart for stress-relieved UNS NO2200 SB-163<br />
seamless tube to Fig. NFN-25.<br />
09-2037 (1) Revised the titles of Tables 2A and 2B to clarify that they cover Section III, Div.<br />
1, Class I and Section III, Div. 3, Classes TC and SC.<br />
(2) Revised the time-dependent properties notes heading in Tables 1A and 1B.