Workshop Equipment. - Matador

Accessories VARIO.
10.1 WORKSHOP TROLLEYS
Make the best of your VARIO.
VARIO Tuning.
Special accessories for assembly onto the side panels of
the VARIO trolley. Not suitable for QUADRO or RATIO
(unless stated otherwise).
Paper Roll Holder 8164 Waste Bin
– With tray
– With brackets, fit into the square perforation
– Delivery without paper roll
Art. Code L mm B mm g
8164 0201 535 200 1650 1
Art. Code L mm B mm H mm g
8164 0204 480 45 190 1100 1
Art. Code L mm B mm T mm g
8164 0207 660 490 45 8500 1
8164
Art. Code L mm B mm H mm g
8164 0202 475 170 150 1200 1
Art. Code L mm B mm g
8164 0205 420 300 4500 1
Art. Code g
8164 0208 750 1
8164
Art. Code L mm B mm H mm g
8164 0203 480 90 85 1110 1
Document Holder 8164 Laptop Holder
8164 Vertical Tool Panel
– Ideal for drawings
– Suitable for DIN A4-sized folders
– With brackets, fit into the square perforation
8164
Art. Code L mm H mm g
8164 0206 1250 300 4500 1
Side Cabinet 8164 Locking Bar Set 8164 Multiplex Worktop
– For safe storage of valuable tools
– With square perforation and lock
– With assembly kit
Be a MATADOR.
– High capacity
– Also suitable as an additional compartment,
e.g. for small parts
– Ideal as additional worktop/storage place
– With quick-release levers and double quick
fixation
– Mountable to each of the 4 VARIO pillars
– Perfect theft protection
– Additional locking of drawers
– Lockable with padlock (included)
Tin Holder
– Capacity up to 5 tins
– With 2 side panels
– With square perforation
– Side panels: W 310 x H 300 mm
– Mountable to the 2 VARIO back pillars
– To insert into the ABS worktop
8164
Art. Code L mm B mm H mm g
8164 0209 570 380 15 2300 1
www.matador.de 15