TPT Tutorial - PikeTec

Page 18 TPT Tutorial
In order to make the test executable once the test cases have been modelled, the test
execution configuration is necessary. Please specify here the test frame model file that has
been generated previously (cf. Figure 16).
2.2.2 The interfaces of the test cases
Figure 16: Test execution configuration
In order to model an executable test case, the interfaces to the system under test must be
defined. TPT provides a “declaration editor” to enable the specification (name, type, etc.)
of the required channels (cf. Figure 17). In the example of the lights control the input and
output channels depicted in Figure 7: Loop between system and test case
must be declared.