transducers - Proceq
transducers - Proceq
transducers - Proceq
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>transducers</strong><br />
Ultrasonic Transducers for Materials Testing<br />
The world’s widest range of ultrasonic <strong>transducers</strong> and accessories for ultrasonic pulse velocity<br />
materials testing applications. Transducer frequency ranges from 24 kHz to 1 MHz. Wheel probes<br />
for continuous testing on site or in a production environment.<br />
Transducers for general use<br />
Use lower frequency <strong>transducers</strong> for large, dense, non-homogeneous samples and higher frequencies for smaller, less<br />
dense, more homogeneous samples. The general guidelines are:<br />
• Concrete: 24-150 kHz<br />
• Timber: 150-220 kHz<br />
• Ceramics: 24-220 kHz<br />
• Graphite: 200 kHz-1 MHz<br />
• Cast Iron: 1 MHz<br />
Standard Transducers<br />
Manufactured from stainless steel and fitted with a BNC coaxial connector.<br />
Part number Nominal Dimensions<br />
Frequency<br />
325 40 026 24 kHz 50 mm dia x 96 mm long<br />
325 40 027 37 kHz 50 mm dia x 50 mm long<br />
325 40 130 54 kHz 50 mm dia x 38 mm long<br />
325 40 090 82 kHz 33 mm dia x 34 mm long<br />
325 40 029 150 kHz 25 mm dia x 34 mm long<br />
325 40 032 200 kHz 20 mm dia x 34 mm long<br />
325 40 042 1 MHz 15 mm dia x 67 mm long<br />
(including connector)<br />
325 40 034 220 kHz 6 mm dia tip, 13 mm dia body, 60 mm long<br />
(including connector)<br />
325 40 039 500 kHz 6 mm dia tip, 13 mm dia body, 60 mm long<br />
(including connector)<br />
Operating temperature range for all the <strong>transducers</strong> is 0-70 °C.<br />
Made in Switzerland ... more than 50 years of know-how you can measure!
Logging Transducers<br />
With integrated switch to trigger data logging, for use with the Pundit + .<br />
Manufactured from stainless steel and fitted with a two pin BNO coaxial connector.<br />
Stock Code Nominal Dimensions<br />
Frequency<br />
325 40 028 24 kHz 50 mm dia x 112 mm long<br />
325 40 030 37 kHz 50 mm dia x 66 mm long<br />
325 40 031 54 kHz 50 mm dia x 54 mm long<br />
Special Purpose Transducers<br />
Manufactured from stainless steel and fitted with standard BNC coaxial connectors.<br />
Exponentially shaped probes for use on very rough or curved surfaces to avoid the<br />
need for surface grinding or the use of very thick couplants.<br />
Stock Code Nominal Dimensions<br />
Frequency<br />
325 40 044 54 kHz 38 mm dia x 120 mm long<br />
(Receiver) RX: 6 mm dia rounded end<br />
325 40 045 54 kHz TX: 6 mm dia flat tip<br />
(Transmitter)<br />
325 40 033 45 kHz Exponential transducer<br />
Accessories<br />
• A range of amplifiers and attenuator options is also available for use<br />
in early-age concrete testing applications and for use with long cables<br />
• Cables from 0.5 m to 30 m long can be supplied from stock<br />
• Couplants for many applications can be supplied: gel, grease, rubber<br />
pads, and more<br />
Pundit 7 Pundit +<br />
Subject to change without notice.<br />
All information contained in this documentation is presented in good faith and believed to be correct. <strong>Proceq</strong> SA makes no warranties and excludes all liability as to the<br />
completeness and/or accuracy of the information. For the use and application of any product manufactured and/or sold by <strong>Proceq</strong> SA explicit reference is made to the<br />
particular applicable operating instructions.<br />
Head Office<br />
<strong>Proceq</strong> SA<br />
Ringstrasse 2<br />
CH-8603 Schwerzenbach<br />
Switzerland<br />
Phone: +41 (0)43 355 38 00<br />
Fax: +41 (0)43 355 38 12<br />
info@proceq.com<br />
www.proceq.com<br />
Sales and Service<br />
810 70 002E ver 01 2010 © <strong>Proceq</strong> SA, Switzerland. All rights reserved.<br />
<strong>transducers</strong><br />
54 kHzA Transducer<br />
...more than 50 years of know-how you can measure!
Change language