RATEC Vertical Battery Mold - Ratec.org

RATEC Vertical Battery Mold
The economical way to produce high
volume in a small space.
M e e t t h e b e t t e r i d e a s !

Upcrete ®
Cost effective production of complex, all-sides-smooth and
extremely high-quality precast concrete elements.
Manual operation makes this vertical battery form economical and easy to use.
Made in the US & Germany using high-quality materials and German precision
engineering.
Space-saving footprint; much more efficient use of your floor space.
Elements from 4” to ___ thickness can be produced.
Compatible with RATEC magnets and
magnetic systems.
2

For highest quality elements, pump from the bottom using our
Upcrete ® Precast Pump.
You’ll get perfect product every time with no voids and virtually no bug holes, even
when casting complex shapes or multiple block-outs, and without vibration.
Compact and portable, the Upcrete ® Precast Pump can be used all over the plant.
With our Universal Concrete Inlets, pump-to-form connection has never
been easier.
3

Typical results of top pour.
4
The RATEC Vertical Battery Mold
system at a glance:
- Cost-effective
- Space-saving
- Expandable
- Can produce panels from 4” to 12”
- Re-locatable
- Can be pumped from the bottom or poured from the top
- Manual operation is easy to use
- Perfect product on all sides every time when pumped from the
bottom
- No vibration required
- Complex geometries possible when pumped from the bottom
M e e t t h e b e t t e r i d e a s !
Headquarters Germany
RATEC GmbH
Karlsruher Strasse 32
D-68766 Hockenheim
Ph +49-6205-9407-29
Fax +49-6205-9407-30
info@ratec.org
www.ratec.org
Perfect results of Upcrete.
Headquarters America
RATEC LLC
6399 142 nd Ave N, Suite 122
Clearwater, FL 33760
Ph +1-727-363-7732
Fax +1-727-363-7463
infous@ratec.org
www.ratec.org