Special tools for unique animals - PFERD

The HSS rotary cutter set shank ø 3 mm
comprises of 10 frequently used shapes with
a special cut, clearly laid out and perfectly
protected in a strong plastic box.
Advantages:
■■Absolutely
precise shaping work.
■■Accurately
adapted geometries for the most
frequent application cases.
Contents:
10 HSS rotary cutters, 1 piece each:
■■928/3
Special cut
(SPG / tapered cone / 8.0 x 14.0 mm)
■■924/3
Special cut
(SPG / tapered cone / 4.0 x 7.0 mm)
Order No. EAN
4007220
■■953/3
Special cut
(N / disc / flap discs / 12.0 x 3.0 mm)
■■947/3
Special cut
(KUD / ball / 8.0 mm)
■■943/3
Special cut
(KUD / ball / 3.2 mm)
■■987/3
Special cut
(B / flame / 7.0 x 12.0 mm)
■■985/3
Special cut
(ZYA / cylinder / 7.0 x 10.0 mm)
■■979/3
Special cut
(RBF / Flame round / 7.0 x 10.0 mm)
■■973/3
Special cut
(N / disc / 8.0 x 1.0 mm)
■■964/3
Special cut
(N / disc / 14.0 x 3.0 mm)
Rotary cutter set shank ø 3 mm
Cut Shank dia.
[mm]
Set 85 HSS 845332 Special cut 3 1 57
The HSS rotary cutter set shank ø 6 mm
comprises of 10 frequently used shapes with
special cut, clearly laid out and perfectly
protected in a strong plastic box.
Advantages:
■■High
stock removal rates thanks to
aggressive special cut.
■■Accurately
adapted geometries for the most
frequent application cases.
Order No. EAN
4007220
HSS rotary cutter in special cut are extremely
durable due to their excellent production
quality, have a high stock removal
performance and are perfectly suited for work
even at low speeds.
Contents:
10 HSS rotary cutters, 1 piece each:
■■HSS
G 1225/6 Z3
■■HSS
L 1225/6 Z3
■■HSS
F 1210/6 Z3
■■HSS
C 1225/6 Z3
■■HSS
F 1009/6 Z3
■■HSS
K 1020/6 Z3
■■HSS
W 1213ST/6 Z3
■■HSS
45/6 Z3 (round flame / 12.0 x 18.0 mm)
■■HSS
64/6 Z3 (ball with neck / 12.0 x 70.0 mm)
■■HSS
55/6 Z3 (ball with neck / 6.0 x 20.0 mm)
Hoof Processing
HSS Rotary Cutter Sets
Recommendation for use:
Use HSS rotary cutters preferably with speedcontrollable
straight grinders or flexible shaft
drives
Application information:
Also suitable for light processing of steel.
Rotary cutter shank ø 6 mm
Cut Shank dia.
[mm]
Set 82 HSS 845349 Special cut 6 1 395
Speeds of HSS rotary cutters
HSS rotary cutters are used at a cutting speed
of 80-100 m/min on steel. The speeds should
be appropriately reduced on the horse's hoof.
The following speeds result dependent on the
rotary cutter ø:
Rotary cutter ø [mm] Rotational speed [RPM]
3.2 6,000 - 10,000
4.0 4,800 - 8,000
6.0 3,200 - 5,400
7.0 2,800 - 4,600
8.0 2,400 - 4,000
10.0 8,000 - 3,200
12.0 1,600 - 2,700
14.0 1,400 - 2,300
11