Download EC SHOW DAILY 2013 Issue No. 1 - European Coatings ...
Download EC SHOW DAILY 2013 Issue No. 1 - European Coatings ...
Download EC SHOW DAILY 2013 Issue No. 1 - European Coatings ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>European</strong> <strong>Coatings</strong> Show Daily 1 19 March <strong>2013</strong> www.european-coatings-show.com<br />
Compact and accurate<br />
dispensing systems<br />
Pirovano designs and builds industrial<br />
in-can and in-batch tinting<br />
plants for both water-based<br />
and solvent-based products.<br />
The dispensing is extremely<br />
accurate and made traceable<br />
by using electronic scales<br />
and the proprietary reliable<br />
and performing “Concentric”<br />
dispensing device. Its special<br />
features are:<br />
Valves move from rest to dispensing<br />
position through a<br />
rotating stainless steel joint<br />
that allows for the elimination<br />
of flexible pipes (which are<br />
often subject to breakages),<br />
Catalysing innovation in<br />
resins and anticorrosion<br />
“K-Flex XM-359” is a new polyester<br />
polyol offering high<br />
optical clarity with improved<br />
adhesion, flexibility and<br />
reduced VOC in isocyanate<br />
and amino-formaldehyde<br />
crosslinked systems.<br />
“K-Flex XM-366” is a low viscosity,<br />
100 % active, saturated<br />
aliphatic polyester diol<br />
with primary hydroxyl groups.<br />
This resin modifier can reduce<br />
VOC and increase flexibility in<br />
isocyanate and amino-formaldehyde<br />
crosslinked systems.<br />
King’s new urethane diols<br />
have been developed to offer<br />
improved mechanical properties<br />
in waterborne automotive<br />
primers.<br />
by means of a pneumatic cylinder,<br />
making the dispensing<br />
operation faster.<br />
Every valve can open to five<br />
different levels.<br />
The dispensing valve is immediately<br />
washed and dried<br />
after dosing.<br />
This design offers the potential<br />
to dose up to 80 components<br />
into a container having<br />
a diameter of only 80 mm.<br />
Pirovano<br />
IT-Cerro Maggiore<br />
www.pirovano.com<br />
Hall 6, Stand 6-327<br />
Fast and flexible viscosity<br />
measurement<br />
Many viscometer users need<br />
fast and easy determinations.<br />
The “VP 1000” and “VP 1000<br />
M” series viscometers are<br />
light and operated by battery<br />
that allows more than<br />
24 hours’ non-stop use. The<br />
“VP 1000” is hand-held but<br />
a stand can be ordered separately.<br />
Pressing just one key allows<br />
users to begin rotation and<br />
measurement, stop the motor<br />
and enter the spindle selection<br />
screen. These features<br />
give users the flexibility to<br />
determine viscosity quickly<br />
and accurately for production<br />
batch release, quality control<br />
or a check anywhere on site.<br />
Four different versions each<br />
offer a fixed speed of 20,<br />
30, 50 or 60 rpm. The viscosity<br />
range varies depending<br />
on version. A key feature is<br />
compatibility with the Brookfield<br />
method, thus allowing<br />
comparison with results from<br />
standard rotary viscometers.<br />
Viscotech Hispania<br />
ES-El Vendrell<br />
www.viscotech.es<br />
Hall 5, Stand 5-250<br />
“Nacorr XR-417” is a rust and<br />
corrosion inhibitor specifically<br />
designed to improve the<br />
resistance properties of direct<br />
to metal coatings, especially<br />
waterbornes.<br />
King will also feature several<br />
new catalysts for amino thermoset<br />
coatings, plus “K-KAT<br />
XK-635” and “K-KAT XK-640”,<br />
the environmentally friendly<br />
alternatives to tin catalysts in<br />
urethanes.<br />
King Industries<br />
US-<strong>No</strong>rwalk<br />
www.kingindustries.com<br />
Hall 1, Stand 1-642<br />
The faster way to stronger mortars<br />
“Peramin AXL 80” has been<br />
introduced as a new accelerating<br />
system based on lithium<br />
sulfate, the best accelerator<br />
for Kerneos calcium aluminate<br />
cement-rich mortars.<br />
This new accelerator is now<br />
available worldwide.<br />
It brings about faster development<br />
of early mechanical<br />
properties at both 23 °C<br />
and 5 °C in comparison with<br />
conventional accelerating<br />
systems. This is due to its<br />
rapid dissolution in water. An<br />
added benefit is the ability to<br />
achieve a defect-free surface<br />
appearance.<br />
Peramin is a fully-owned subsidiary<br />
of Kerneos, formerly<br />
Lafarge Aluminates. Kerneos<br />
offers a full range of high<br />
technology calcium aluminate<br />
binders to the refractory<br />
and steel industries, building<br />
chemistry, wastewater and<br />
other technical Industries.<br />
Kerneos<br />
FR- Neuilly sur Seine<br />
www.kerneos.com<br />
Hall 1, Stand 1-555<br />
Reduce Tio2 Requirement by 15 % :<br />
Pat-Add DA 103, DA 202<br />
Dispersing Difficult Carbon Black :<br />
Pat-Add DA 934<br />
A One Stop Solution for Low & High Shear<br />
Rheology Modification : Pat-Add Rheol 99<br />
PATCHAM (FZC)<br />
P.O. Box 7753, SAIF Zone<br />
Sharjah, UAE<br />
Tel: +971-6-5570035<br />
Fax:+971-6-5570038<br />
E mail: patcham@emirates.net.ae<br />
www.patchamltd.com<br />
Products<br />
The natural source for new polyols<br />
Oleon is Europe’s leading<br />
specialist producer of oleochemicals.<br />
Following the successful<br />
start-up of its new<br />
MPG (propylene glycol) plant<br />
in 2012, the company can offer<br />
a new renewable resource<br />
to many industries. MPG is a<br />
key component in formulating<br />
waterborne paints and in<br />
resin production.<br />
Bio-sourced production is<br />
based on glycerol, a by-product<br />
from the processing of animal<br />
fats and vegetable oils.<br />
This process emits 70 % less<br />
greenhouse gases than petro-<br />
17<br />
chemical-based production,<br />
with high product quality.<br />
In the polyurethanes market,<br />
Oleon has developed a<br />
new range of polyester polyols<br />
based on rapeseed oil<br />
for CASE applications. Being<br />
based on dimer fatty acids<br />
they provide a unique combination<br />
of hydrophobicity, hydrolysis<br />
resistance and high<br />
flexibility in the final PU.<br />
Oleon<br />
BE-Ertvelde<br />
www.oleon.com<br />
Hall 1, Stand 1-548