DS_SMCE21011-V2 20101222 final [Compatibility Mode]

SMCE21011 v2
IEEE a/b/g/n 2T2R PoE Concurrent Dual
Band Wireless Gigabit AP/Router
Product Overview
The EliteConnect SMCE21011 v2 IEEE 802.11h Wireless Enterprise Access
Point is based on IEEE 802.11n standards. The SMCE21011 v2 2T2R Dual Band
PoE Wireless Access Point provides the best class, secure, robust and high
performance data transmission and wireless coverage with single radio dual band
that provides both 2.4GHz and 5GHz radio bands.
Key Features and Benefits
Wireless IEEE 802.11n Technology
Compliant with IEEE 802.11n standards and MIMO
(Multi Input Multi Output) wireless technology, the
SMCE21011 v2 provides 2 radio frequency (RF) input
and 2 RF output to extend and increase 2 to 4 times the
bandwidth and throughput output compared to existing
Wi-Fi access points. Supporting the Spatial Multiplexing
transmission technique the SMCE21011 v2 combines
the RF signal and transmit multiple data streams at the
same time and on the same channel.
Dual Band PoE Access Point
To maximum total return on investment, SMCE21011 v2
uses dynamic rate shifting and provides automatic
matching for the best connection speed to simplify the
installation process. WLAN network connections allow
users to be connected to the network, even while
roaming. The SMCE21011 v2 supports two optional
fixed dual band antennas and provides optimal wireless
coverage concurrently for RF at 2.4GHz IEEE 802.11
b/g/n and 5GHz IEEE 802.11 a/n. Integrated with IEEE
802.3af Power over Ethernet (PoE), the SMCE21011 v2
allows Wi-Fi deployment where power outlets are not
available.
Advanced Traffic
Management
SMCE21011 v2 supports two
SSIDs and can support up to 50
wireless clients, which can be
physically separated by different
access points. IP sharing allows
NAT/NAPT functions to share
the broadband connection up to
253 users (wired and wireless).
Virtual server and DMZ functions
allows internal servers to be
accessed from the Internet.
Enhanced Security
In Order to maintain a secured wireless network, the
SMCE21011 v2 offers the latest wireless security
technologies by supporting both Personal and Enterprise
versions of WPA-PSK and WPA2-PSK (IEEE 802.11i).
To further protect the wireless network, RADIUS
Authentication, Access Control list (ACL), Wireless LAN
segmentation and Disable SSID Broadcast are also
integrated. IEEE 802.1x authentication protocol supports
Extensible Authentication Protocol (EAP) MD5,
Transport Layer Security (TLS), Protected EAP (PEAP)
and Tunneled TLS (TTLS).
Full Management Capabilities
The SMCE21011 v2 provides multiple management
options include Web (HTTP), Secure HTTP (HTTPS),
Secure Sockets Layer (SSL), Secure Shell (SSH), and
Telnet can also be chosen by network administrators.

Features
Physical Ports
•One WAN 10/100/1000 BASE-T Gigabit Ethernet (RJ-45) port
with IEEE 802.3af of Power over Ethernet (PoE) support
• Four LAN 10/100/1000 BASE-T Gigabit Ethernet (RJ-45) ports
• Two fixed antennas
• Nine LEDs : POWER, LINK, 2 Dual Band, 4 LAN (Ethernet
Link/Activity), WLAN (Wireless Link/Activity), and Gigabit
• Reset/WDS button
• DC-in jacket
Standards
• IEEE 802.11n 2.4GHz and 5.0GHz
• IEEE 802.11a 5.0GHz
• IEEE 802.11b/g, 2.4GHz
• IEEE 802.3, IEEE802.3u, IEEE 802.3ab
• IEEE 802.3af Power over Ethernet (PoE)
• IEEE 802.11h Regulatory Domain Selection
• Wireless Distribution System (WDS)
Wireless Frequency
•802.11g/n:
2.4 ~ 2.4835 GHz (US, Canada)
2.4 ~ 2.4835 GHz (ETSI, Japan)
• 802.11b:
2.4 ~ 2.4835 GHz (US, Canada)
2.4 ~ 2.4835 GHz (ETSI)
• 802.11a:
5.15 ~ 5.25 GHz (lower band) US/Canada, Europe, Japan
5.25 ~ 5.35 GHz (middle band) US/Canada, Europe, Japan
5.725 ~ 5.825 GHz (upper band) US/Canada
5.50 ~ 5.70 GHz Europe
Wireless Features
• Operating Mode : AP / WDS Bridge / WDS Client
• Auto Channel Selection
• Transmit Power Adjustment
• Two SSID (One for 2.4GHz, One for 5GHz)
• IEEE802.11h DFS/DFS2/DFS3 and automatic TPC
Security
• WEP 64-/128-bits
• Wi-Fi Protected Access (WPA/WPA2)
• WPA/WPA2(PSK) over WDS
• Web / HTTP redirection
• Access Control List
• SSID Broadcast Disable
Network Management
•Web Based Management
• Software Download and Upgrade by HTTP
• System Information – AP Status / Station Status
• Single firmware images
Antenna
• Type : Omni Direction
• Gain : 3dBi in 2.4GHz, 3dBi in 5GHz
Regulatory Compliance
• FCC Part15 Subpart B
• CE
Radio Signal Certification
• FCC Part 15C 15.247
• EN 300 328
• EN 301 489-1
• EN 301 489-17
Safety
• IEC 60950-1
Mechanical
• Dimension : 30mm (H) x 157 mm (W) x 127mm (D)
• Wall Mountable
Electrical
• POE Nominal Input Voltages: 48V/0.35A
Power consumption under 802.3af Class0 PD
definition
PD RJ45 power input pin: pair 4,5,7,8 or pair 1,2,3,6
• Power adapter: Input :100~240ACV, Output:
12VDC/1A,
Environmental Specification
Temperature:
0 to 40 Degrees (Standard Operating)
-20 to 60 Degrees (Storage)
• Humidity: Operation: 10% to 90% (Non-condensing)
Storage: Max 95% (Non-condensing)
• Vibration: IEC 68 part, test Ee & Fh,
• Shock: IEC 68-2-29, ASTM D3332
• Drop: IEC 68-2-32, or ISO 4180/2
• Altitude: IEC 68-2-40 test Z/AM, IEC 68-2-41 test
Z/AMD
Contact
Headquarters:
Edgecore Networks Inc.
No. 1 Creation Road III
Science-based Industrial Park
Hsinchu, Taiwan, R.O.C. 00300
South America:
SMC Networks
A.M. de Justo 2050 Of. 215
(1107) Buenos Aires, Argentina
www.edge-core.com