Catalogue 2012 Cattle S h e e p goatS - SUEVIA HAIGES GmbH

transformers 230/24 V
50 w, 100 w, 200 w, 400 w
heateD anD FroSt-proteCteD DrInkerS / heatIng unItS
• The transformer has to be installed as close as possible to the drinking bowl, but out
of reach of the animals. Connection is made to an AC plug 230 V.
• SUEVIA Transformers are always factory-mounted on a plate with air space which
enables to fix the transformer also on wooden walls, without any further substructure.
order ref. type packing hints
101.0322 Transformer 230/24 V, 50 W 1 piece/box
101.0380 Transformer 230/24 V, 100 W 1 piece/box
101.0390 Transformer 230/24 V, 200 W 1 piece/box
101.0392 Transformer 230/24 V, 400 W 1 piece/box
thermostat order ref. 101.0389
• For automatic switch on/off of transformer with max. 16 A, 230 V
• Installation is made into supply line leading to the transformer
• With one thermostat the following amount of SUEVIA transformers can be
operated:
- max. 40 x transformer 50 W
- or max. 20 x transformer 100 W
- or max. 10 x transformer 200 W
- or max. 5 x transformer 400 W
order ref. type packing hints
101.0389 Thermostat 1 piece/box
aluminuim adhesive tape
50 mm wide, 50 m order ref. 101.1099
• When plastic pipes are used and for better heat distribution the pipe has to be
wrapped first with an aluminium adhesive tape
• One meter of ½" pipe requires approximately 2 m of tape, and one meter of ¾" pipe
approx. 2,5 m of tape
• Width of tape 50 mm (2"); length of roll in total 50 m
order ref. type packing hints
101.1099 Aluminium adhesive tape, 50 mm wide, 50 m 50 m/roll
Frost protection heating Cable 24 V
20 w, 2 m order ref. 101.0861
30 w, 3 m order ref. 101.1863
• provides frost protection for feed pipes in galvanized steel or appropriate plastic!
• highly recommended to ensure a frost-free feed pipe leading to e.g. Model 25R-H,
46, 340-H, 500, 520, 600, 620 and all types of troughs
• Frost protection heating cable is wrapped around the water pipe and connected to the
transformer like the heating element of the drinker. Plastic pipes must first be wrapped
with an aluminium adhesive tape (see above)
order ref. type packing hints
101.0861 Frost protection heating cable, 24 V, 20 W, 2 m 1 piece
101.1863 Frost protection heating cable, 24 V, 30 W, 3 m 1 piece
InSIDer tIp!
how to find the ideal transformer for your
heated drinking bowls!
Quantity of needed drinking bowls or additional heating
elements
x indicated power (W)
+ quantity of needed frost protection heating cables
x indicated power (W)
example:
3 x Model 46, 24 V, 80 W 240 W
3 x frost protection heating cable, 24 V, 20 W 60 W
Total power 300 W
For these requirements the following transformers can be
used:
Option A: 3 x transformer 100 W = 300 W
Option B: 1 x transformer 100 W
1 x transformer 200 W = 300 W
Option C: 1 x transformer 400 W
2 m: 101.0861
3 m: 101.1863
101.0389
101.1099
23