Ercolina Catalogue - Pipe & Tube Machines LTD

FORMERS FOR MB42, MB42P, MD070, MD083, MN092
Artt. series Section Tools* Description
156___E
156L
156L___E
NON MANDREL FORMERS
Tube
(R90, R100,
R130, R150)
Tube
(R36, R46,
R56, R67,
R82, R112)
Tube
(R90, R100,
R130, R150)
197/1 Tube
Semi-special
Semi-special
Semi-special
Semi-special
198 Tube
Special
198L Tube Special
199 Profile Special
Material:
Ideal for bending:
Tube dimension:
Material:
Ideal for bending:
Tube dimension:
Material:
Ideal for bending:
Tube dimension:
Material:
Ideal for bending:
Tube dimension:
Material:
Ideal for bending:
Tube dimension:
Material:
Ideal for bending:
Tube dimension:
Material:
Ideal for bending:
Profile dimension:
Cast iron formers
2 2
Mild steel tubes (T.S. 42 Kg/mm - Y.P. 25 kg/mm ), hard copper and similars
(with wall thicknesses smaller than 3.6 mm - 0.15”).
Radii available standard. Diameters upon request. See page 73
Cast iron light series formers
- Stainless Steel, soft materials such as aluminium (except copper);
- Ornamental applications
(where marks and scratches need to be minimal);
- Hydraulic applications
(with wall thicknesses higher than 3.6 mm - 0.15”, and smaller than 5 mm - 0.2”).
Radii available standard. Diameters upon request. See page 73
Cast iron light series formers
- Stainless Steel, soft materials such as aluminium (except copper);
- Ornamental applications
(where marks and scratches need to be minimal);
- Hydraulic applications
(with wall thicknesses higher than 3.6 mm - 0.15”, and smaller than 5 mm - 0.2”).
Radii available standard. Diameters upon request. See page 73
Aluminium formers
2 2
Mild steel tubes (T.S. 42 Kg/mm - Y.P. 25 kg/mm ),
stainless steel, aluminium, hard copper and similars
(with maximum wall thickness 1.5 mm - 0.06”).
Radii available standard. Diameters upon request. See page 77
For minimum wall thicknesses see tables 11, 12 on page 83
Cast iron and/or steel formers (material to be decided upon the Manufacturer)
2 2
Mild steel tubes (T.S. 42 Kg/mm - Y.P. 25 kg/mm ), hard copper and similars
Radii and diameters upon request. See page 77
For minimum wall thicknesses see table 10 on page 83
Cast iron and/or steel formers (material to be decided upon the Manufacturer)
2 2
Mild steel tubes (T.S. 42 Kg/mm - Y.P. 25 kg/mm ), hard copper and similars
Radii and diameters upon request. See page 77
For minimum wall thicknesses see tables 13, 14, 15 on page 83
Cast iron and/or steel formers (material to be decided upon the Manufacturer)
2 2
Mild steel tubes (T.S. 42 Kg/mm - Y.P. 25 kg/mm ), hard copper and similars
Radii and dimensions upon request. See page 78
* TOOLS LEGEND: Standard = Standard radius and diameter; Semi-special = Standard radius and special diameter; Special = Special radius and diameter
Standard former in cast iron Light series former in cast iron
Standard former in aluminium
69
SA / E / A