epros®DrainLiner Program - Trelleborg

More documents

Recommendations

Info

epros ® DrainLiner (PVC) max. 80 °C (hot water) Benefits Applications • Almost no wrinkling. • Due to the elasticity of the liner, the installation pressure can be low. • Optimal for installation with a water column. * greater pipe sizes and wall thicknesses available on request DRAIN LINING • e p r o s ® DrainLiner (PVC) for pipe lines and sewers with diameters from DN 100 to DN 1200 * . For installations acc. to DIBt specifications use the nominal pipe sizes given therein. • Use for lines with bends up to 45° - without changes in nominal size. • Suitable for being installed in circular, egg-shaped and special sections. Specifications Material Polyester needle-felt tube (PES tube) with a polyurethane film coating (TPU). The coating (approx. 450 µm) is deemed an installation aid. Undersize; 10 % Designs (2 qualities) Sewn (from DN 100 to DN 250) Sewn & welded (from DN 150 to DN 600) Wall thickness Wall thicknesses between 3 and 21 mm can be selected, depending on the results of the design calculations. Suitable resins The epros ® DrainFlexLiner can be used with epoxy, silicate or polyester resin systems. Curing method Ambient cure Hot water up to 80 °C No steam cure
epros ® DrainPreLiner Ideal for protecting resins from infiltration. 9 DRAIN LINING The preliner is a thin but resistant protective PE film tube (approx. 200 µm). Generally, its use is not mandatory, because it provides no structural stability to the liner. The preliner will remain in place and cannot be removed. Under certain circumstances, however, a preliner is pulled or inverted into the host pipe prior to liner installation in order to form a barrier between the pipe wall and the liner to prevent the resin from direct contact with the host pipe, or avoid damage to the liner. Applications (examples) • Absolutely necessary e.g. in groundwater-saturated zones (groundwaterinfiltration). • For rehabilitation of displaced joints where water accumulations before liner installation cannot be avoided. • Absolutely necessary if using the rapid ambient curing epoxy resin systems epros ® EPROPOX FC15 or FC30. Available sizes: DN 100 to DN 1000
Page 1 and 2: epros ® DrainLiner Program All Lin
Page 3 and 4: epros ® DrainLinerPP (mit PP-Besch
Page 5 and 6: epros ® DrainSteamLiner max. 120
Page 7: epros ® DrainPlusLiner (TPU) max.
Page 11 and 12: epros ® DrainCali 11 „Light Duty

epros®DrainLiner Program - Trelleborg

Create successful ePaper yourself

Delete template?

Save as template?