ELINCHROM FLASH SYSTEM - ProCenter
ELINCHROM FLASH SYSTEM - ProCenter
ELINCHROM FLASH SYSTEM - ProCenter
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ENTRY PROFESSIONAL<br />
BRX<br />
The BRX compact fl ash units are a further<br />
evolution of the features and quality that are<br />
Elinchrom. They are the “EL-500”’s of the<br />
digital era.<br />
The concept is simple : control, power, speed<br />
and versatility. With many programmable<br />
features and the EL-Skyport remote system,<br />
the BRX enables photographers the greatest<br />
freedom to express their individuality. The<br />
BRX series deliver the quality of performance<br />
needed for a modern workfl ow.<br />
Available in either 250 Ws or 500 Ws, they are<br />
perfect for portraiture, landscape, product and<br />
architectural photography.<br />
WHAT’S NEW FEATURES<br />
– Take full control of your units<br />
settings with the EL-Skyport App<br />
via the optional WiFi module for<br />
iPod Touch ®/iPad ®/iPhone ® !<br />
– Additional features can be<br />
found when used with the<br />
EL-Skyport Software and the<br />
USB Transceiver RX such as<br />
Flash-Delay for strobing-e ects.<br />
– Firmware update option.<br />
– Updated electronics for even<br />
better performance than<br />
before !<br />
CONTROL PANEL<br />
– 8 –<br />
Handle with support for spare fuses<br />
Modelling lamp up & down buttons and<br />
scroll /program buttons for advanced features setup<br />
Digital multi display and charge / discharge indicator<br />
Modelling lamp on/o -free-prop – programmable<br />
Power up & down buttons and<br />
scroll /program buttons for advanced features setup<br />
Mains inlet socket includes the mains fuse (slow blow)<br />
Tilt head with extra umbrella fi tting<br />
– Built-in EL-Skyport receiver for<br />
triggering.<br />
– EL-Skyport with 8 Frequency<br />
Channels with 4 Groups.<br />
– EL-Skyport Speed Sync mode<br />
for synchronization up to a<br />
1/320 s on enabled SLR<br />
cameras.<br />
– Pre-fl ash detector system to<br />
enable the use of BRX with<br />
speedlights.<br />
– Visual Flash Confi rmation<br />
option. The modelling lamp<br />
comes on to confi rm the fl ash<br />
has been triggered.<br />
– Proportional, maximum,<br />
minimum and independent<br />
adjustment of the modelling<br />
lamp.<br />
– Variable f-stop steps : 1/1, ½,<br />
4/10, 1/3, 2/10 or 1/10 steps<br />
are available.<br />
– Programmable ready beep<br />
function.<br />
– Power Auto-dump.<br />
– Automatic temperature<br />
controlled ventilation.<br />
– Action fl ashtube for sharper<br />
images.<br />
Modelling lamp fuse<br />
Eye-Cell on/o -programmable<br />
Charge Ready Beep on/o – programmable<br />
Eye-Cell receptor<br />
Open fl ash / Test button<br />
Synch socket / 3.5 mm jack / low 5V sync voltage<br />
Mains on/o switch<br />
Centred umbrella tube for EL Umbrellas 7 mm diameter<br />
Standard stand socket 5/8 inch<br />
Knurled clamp screw<br />
Compacts<br />
EL-Skyport<br />
Compatible<br />
See p. 26<br />
BRX 250 — 250 Ws — N° 20440.1 BRX 500 — 500 Ws — N° 20441.1<br />
–Multi-voltage auto-detection :<br />
90-270 V (excluding modelling<br />
lamp).<br />
– 5V sync socket for maximum<br />
protection of digital cameras.<br />
– High impact resistant body<br />
shell.<br />
– Accessory bayonet allowing<br />
the complete range of light<br />
modifi ers.<br />
– Rubberised handgrip with<br />
built-in fuse storage.