Soyabase Plus - Uzin Utz AG

High Solid Natural Oil-Wax Combination
Soyabase Plus
Natural oil-wax combination with natural soya oil for impregnation of wood flooring
Description:
Combination of natural liquid oil and wax for impregnation and surface
improvement.
Especially suitable for:
❚ Sanded wood flooring
❚ Sanded on-edge parquet
❚ Sanded parquet flooring, including wood-plank
❚ Woodblocks
❚ Structural interior decorative wood
❚ Wooden furniture, solid wood.
❚ Suitable for use on warm water underfloor heating systems
Important Note: contact of this product with pads or textile materials
leads to the risk of spontaneous combustion!
Product Properties / Benefits:
Oil-wax combination with natural soya oil that leaves an open-pored
breathable diffusive surface. The wax content in Soyabase Plus gives a
water and dirt repellent effect that protects the surface.
❚ Ready to use
❚ Only 3 % solvent content
❚ Easy to apply
❚ Roller or trowel application
❚ Enhances the colour and structure of the wood
❚ Resistant to household chemicals
Technical Data:
Packaging: metal container
Packsize: 3 litre
Shelf life: approx. 12 months
Colour: beige
Consumption per coat (1): 25 – 35 ml /m 2
Working temperature: 18 – 25 °C
Further coats: after approx. 1 hour*
Set to foot traffic: after approx. 24 hours*
Further maintenance: after approx. 3 – 4 days*
* Under normal climatic conditions.
(1) The consumption can vary according to the absorbency and surface condition of the wood or
parquet to be impregnated.
gets to the point.

Soyabase Plus
Surface Preparation:
After the adhesive is fully hardened, the surface treatment can commence.
Pre-sand with a drum sanding machine using a Pallmann
abrasive, grade 36 to 80 grit. The surface to be oiled must be clean, dry,
free from sanding dust, and maintenance product residues, etc.
Application:
1. Before use, allow the containers to come to room temperature and
shake well.
2. Using the Pallmann Surface Trowel, apply several, even coats of
Soyabase Plus onto the surface, one after the other and a minimum
of 2 coats, until the flooring material is saturated. Alternatively,
for highly absorbent timbers, the first coat can be applied
using a short-pile Pallmann roller.
3. After approx 30 – 45 minutes remove any residual excess with a
white pad. For heavily saturated surfaces, remove the excess with
a green pad.
4. For an even better finish, the surface can be re-polished the following
day using a white pad lightly dampened with Soyabase Plus.
5. After use, clean tools with Uni Clean.
6. For a long wear life of the flooring, we recommend regular maintenance
in accordance with the manufacture’s recommendations,
using Care-Oil, Wood Floor Soap and Wash-Wax.
Consumption:
A minimum of 2 trowel-applied coats is recommended.
Recommended quantity per coat: 25 – 35 ml/ m 2
Coverage per litre: 30 – 40 m 2
* The consumption can vary according to the absorbency and surface condition of the wood or
parquet to be impregnated.
Pallmann | A Brand of UFLOOR Systems
D | JP Coatings GmbH
Im Kreuz 6 | D-97076 Würzburg
Telefon +49 (0)931 27964 -0
Telefax +49 (0)931 27964 -50
E-Mail info@pallmann.net
Internet www.pallmann.net
Important Notes:
❚ Shelf life minimum 12 months in original packaging when stored in relatively
cool conditions. Tightly reseal opened containers and use the
contents as quickly as possible.
❚ Optimum conditions are 18 to 25 °C and relative humidity > 35 % and
< 65 %. Low temperatures and high humidity lengthen, high temperatures
and low humidity shorten the drying time.
❚ As joint filler, we recommend Hydro Kitt.
❚ If Soyabase Plus is to be roller-applied, always use a short-pile roller (e. g.
the Pallmann Roller). Then over-trowel any surface residues whilst still wet.
The consumption for roller-application must not exceed 60 ml/m2 ❚ If impregnating pre-finished parquet, always follow the manufacturer’s
recommendations and always make a test.
❚ Moderate use of the surface is possible 24 hours at the earliest after
polishing.
❚ Leave freshly oiled surfaces at least 3 – 4 days before any maintenance
treatment with Soya Wax Care.
❚ Regular maintenance with Pallmann Soya Oil Care, Soya Soap Care and
Soya Wax Care improves the appearance, and increases the wear life of the
waxed surfaces.
❚ The following standards and notices are applicable and especially recommended:
DIN 18 356 “Working with parquet” and DIN 18 367 “Working
with woodblocks”.
Protection of the Workplace and the Environment:
Non-flammable. During application, the use of a barrier cream and good ventilation of the work area
are recommended.
Important Note:
contact of this product with pads or textile materials leads to the risk of spontaneous
combustion! Therefore, soak any contaminated cloths, pads, etc.with water and store or
dispose in tightly sealed containers.
Disposal:
Where possible, collect product residues and re-use. Do not allow into drains, watercourses or landfill.
Empty, drip-free plastic or metal containers are recyclable. Containers with liquid residues and liquid
waste product are Special Waste. Containers with hardened residues are Construction Waste.
GB | Uzin Ltd.
4/5 Cholswell Court · Shippon | Abingdon · Oxon OX136HX
Telephone +44 (0)1235 5341-06
Telefax +44 (0)1235 5341-07
E-mail info@uzin.co.uk
Internet www.uzin.co.uk
11.06