2 - SMG - Slotted Microwave Guide - VAHLE, Inc
2 - SMG - Slotted Microwave Guide - VAHLE, Inc
2 - SMG - Slotted Microwave Guide - VAHLE, Inc
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.3 RF Termination<br />
RF Termination <strong>SMG</strong>T-EAB<br />
3.4 Joint Splice Clamp<br />
160<br />
Joint Splice Clamp <strong>SMG</strong>T-PV<br />
3.5 Waveguide Anchor Bracket<br />
Waveguide Anchor Bracket <strong>SMG</strong>T-FL<br />
3 MECHANICAL COMPONENTS<br />
The RF termination <strong>SMG</strong>T-EAB has to be installed<br />
generally (with one sided RF-signal feeding) at the<br />
end of the system, in the last <strong>SMG</strong>T-profile. This<br />
has to be done with help of the installation material<br />
which is in the scope of supply.<br />
It provides the required RF termination.<br />
The profile joint splice clamp <strong>SMG</strong>T-PV creates a<br />
save mechanical and high frequency technical<br />
connection of single <strong>SMG</strong>T-profile sections.<br />
The joint splice clamp is made of stainless steel.<br />
As the <strong>SMG</strong>T-profile is installed in a sliding way, it<br />
needs to be fixed through the anchor bracket<br />
<strong>SMG</strong>T-FL. With this is a temperature depending<br />
movement to both system ends possible.<br />
The anchor bracket is further used as an earthing<br />
connection. It is availale in three surface versions<br />
bright, anodized and epoxy coated.<br />
In the scope of supply is aswell the required installation<br />
material.<br />
17
Change language