Enclosed Conductor System MKH

MKHD/ MKHD/MKHF/MKHS
MKHS
Anti-condensation sections
The anti-condensation section consists of 1 m conductor with air
circulation holes, covered by a protection hood.
The anti-condensation section doesn't separate the conductor.
Use of the anti-condensation section
At transition areas where the system transitions from indoor to outdoor.
Thereby a icing of the outside conductor will be avoided, as the
warm air leaks out of the anticondensation
section and will not condensate in the housing (see sketch).
Feeding
No extra feeds required as the Powerail is not interrupted
Collectors
No extra collectors required
installation
The anti-condensation section is to be placed outdoors, close to
the transition point.
Type Weight kg Order - No.
MBHD 6 - 10 HS 1,938 262 570
MBHD 6 - 10 SS 1,938 262 571
Type Weight kg Order - No.
MBHS 6 / 40 - 100 HS 4,622 262 135
MBHS 7 / 40 - 100 HS 4,840 262 136
MBHS 8 / 40 - 100 HS 5,018 262 137
MBHS 6 / 140 - 160 HS 4,662 262 138
MBHS 7 / 140 - 160 HS 4,840 262 139
MBHS 8 / 140 - 160 HS 5,018 262 140
MBHS 6 / 200 HS 4,899 262 144
MBHS 7 / 200 HS 5,077 262 145
MBHS 8 / 200 HS 5,255 262 146
MBHS 6 / 40 SS 4,662 262 141
MBHS 7 / 40 SS 4,840 262 142
MBHS 8 / 40 SS 5,018 262 143
24
End cap
Runway
Outdoor
Anti-condensation
section
0,5 - 1 m
max. 125 m
1000 100
Line feed
Fixpoint hanger
Powerail
0,5 - 1 m
max. 125 m
Indoor Outdoor