English - Meijer Special Equipment
English - Meijer Special Equipment
English - Meijer Special Equipment
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A trademark of <strong>Meijer</strong> <strong>Special</strong> <strong>Equipment</strong><br />
We take as an example the filled in type plate from Figure 4.2 with the type RE4-35-1350-1000. The<br />
maximum capacity of both telescopic forks is 35 x 100 = 3500 kg at a load centre of 600 mm. That<br />
means that the maximum capacity of one telescopic fork is 3500 / 2 = 1750 kg at a load centre of 600<br />
mm. If the telescopic forks are extended you must look at Figure 4.3 to calculate the new maximum<br />
capacity at the corresponding load centre. If the load centre lies e.g. at 1200 mm then Figure 4.3<br />
shows here a correction factor of 0,5. So the maximum capacity of this telescopic fork at a load centre<br />
of 1200 mm is 1750 x 0.5 = 875 kg.<br />
!<br />
Warning:<br />
Figure 4.3 applies only to the telescopic forks. The residual capacity<br />
of the fork-lift truck with the telescopic forks must be provided for by<br />
an authorised fork-lift truck dealer.<br />
8 © MEIJER SPECIAL EQUIPMENT 2005
Change language