Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Direct (DWH) and indirect (Mono) <strong>Water</strong><br />
<strong>Heaters</strong> for potable water installations.<br />
<strong>Supastor</strong> DWH<br />
<strong>Supastor</strong> MONO<br />
Economical, high performance,<br />
enamelled load storage vessels for<br />
hot (potable) water storage.<br />
<strong>Supastor</strong> <strong>Water</strong> <strong>Heaters</strong><br />
All units are extremely compact and the connections are all conveniently placed<br />
‘in-line’ to make installation easier, neater and as a result, faster. The highly<br />
efficient heating coil in the indirect units are designed to heat the maximum area<br />
of water within the vessel and provide extremely quick reheat times from only<br />
16 minutes. The direct model can be fitted with two immersion heaters to allow<br />
for both ‘white meter’ heating as well as boosting. <strong>Supastor</strong> unvented cylinders<br />
provide exceptional value for money combined with outstanding performance.<br />
<strong>Supastor</strong>-Range <strong>Water</strong> <strong>Heaters</strong>:<br />
• High-quality enamelling to DIN 4753/Part 3 for hygienic<br />
water supply and corrosion protection in connection with<br />
Mg or impressed anode.<br />
• Insulation: CFC free hard foam (with easy clean, white<br />
outer plastic shell).<br />
SUPASTOR DWH and MONO<br />
LS Storage Vessels<br />
• Maximum operating overpressure - cylinder/coil: 10/16 bars.<br />
• Maximum operating temperature - cylinder/coil: 95/110 °C.<br />
• Certification: WRC listed and approved.<br />
Type Nominal Coil ø with Height with Weight Thermal output Code<br />
capacity/l surface/m 2 insulation/mm insulation/mm kg in kW u. l/h* number<br />
MONO-120 120 0,5 560 940 47 13 / 223 17311<br />
MONO-150 150 0,6 560 1040 51 15 / 265 17312<br />
MONO-180 180 0,6 560 1190 55 15 / 265 17313<br />
MONO-210 210 0,9 560 1340 65 24 / 414 17314<br />
MONO-250 250 1 560 1590 71 27 / 464 17315<br />
MONO-300 300 1,4 560 1840 77 38 / 657 17316<br />
DWH-120 120 - 560 940 38 - 17301<br />
DWH-150 150 - 560 1040 40 - 17302<br />
DWH-180 180 - 560 1190 44 - 17303<br />
DWH-210 210 - 560 1340 48 - 17304<br />
DWH-250 250 - 560 1590 54 - 17305<br />
DWH-300 300 - 560 1840 60 - 17306<br />
* first flow temperature 80 ºC and water heating from 10 to 60 ºC.<br />
For use on all closed water supply systems. High quality double layer enamelling to<br />
DIN 4753 Part 3 to provide hygienic hot water supply, optimum corrosion protection<br />
and minimal calcium build-up. Demand peaks satisfied by storage volume and<br />
refilling during pump inactivity, hence particularly economical water heater.<br />
LS-Range Storage Tanks:<br />
• Economical, high performance, double enamelled for hot • High-quality enamelling to DIN 4753/Part 3 for hygienic hot<br />
and cold (potable) water storage.<br />
water supply and corrosion protection in connection with<br />
• Load storage tanks for use in connection with external heat Mg or impressed anode.<br />
exchangers.<br />
• Assembly-friendly and largely maintenance free.<br />
• Insulation: 80 mm CFC free assembly-friendly soft foam • Adjustable feet for accurate levelling.<br />
(with easy clean, outer plastic shell).<br />
• Low tendency to calcinations due to smooth surfaces.<br />
• Demand peaks satisfied by storage volume and refilling • Maximum operating overpressure: 10 bars.<br />
during pump inactivity.<br />
• Maximum operating temperature: 95 °C.<br />
LS with 80mm soft foam insulation<br />
Type Nominal ø with Height with Weight Code<br />
capacity/l insulation/mm insulation/mm kg number<br />
LS-200 200 710 1160 53 18720<br />
LS-300 300 710 1660 82 18730<br />
LS-500 500 910 1500 125 18750<br />
LS-750 750 910 2000 155 18785<br />
LS-1000 1000 960 2260 200 18800<br />
LS-1500 1500 1160 2400 350 18815<br />
LS-2000 2000 1260 2440 420 18820
Economical, high performance,<br />
stainless steel load storage vessels<br />
for hot (potable) water storage.<br />
Mild steel buffer vessels suitable<br />
for closed heating and chilled<br />
water systems.<br />
LS/E Storage Vessels<br />
For use on all closed water supply systems. Optimum corrosion protection and<br />
minimal calcinations. Demand peaks satisfied by storage volume and refilling<br />
during pump inactivity, hence particularly economical water heating.<br />
LS/E-Range Storage Tanks:<br />
• Economical, high performance, stainless steel vessels for<br />
hot (potable) water storage.<br />
• Load storage tanks for use in connection with external heat<br />
exchangers.<br />
• Insulation: 80 mm CFC free assembly-friendly soft foam<br />
(with easy clean, outer plastic shell).<br />
• Demand peaks satisfied by storage volume and refilling<br />
during pump inactivity.<br />
LS/E with 80 mm soft foam insulation<br />
PS Storage Vessels<br />
• Assembly friendly and largely maintenance free.<br />
• Adjustable feet for accurate levelling.<br />
• Low tendency to calcinations due to smooth surfaces.<br />
• Maximum operating overpressure: 10 bars.<br />
• Maximum operating temperature: 95 °C.<br />
Type Nominal ø with Height with Weight Code<br />
capacity/l insulation/mm insulation/mm kg number<br />
LS/E-300 200 710 1660 80 18530<br />
LS/E-500 500 910 1500 120 18550<br />
LS/E-750 750 910 2000 150 18580<br />
LS/E-1000 1000 960 2260 190 18590<br />
Reduced boiler usage and improved system efficiency by the storage of large<br />
quantities of water.<br />
PS-Range Storage Tanks:<br />
• Steel vessels for water storage.<br />
• Buffer vessels suitable for closed heating and chilled water<br />
systems.<br />
• Insulation: 80 mm CFC free assembly-friendly soft foam<br />
(with easy clean, outer plastic shell).<br />
(Only for heating installations suitable)<br />
• Reduced boiler usage and improved system efficiency<br />
through the storage of large quantities of water.<br />
PS with 80 mm soft foam insulation<br />
(PS insulation only for heating systems suitable)<br />
• Externally painted, inside rough.<br />
• Adjustable feet for accurate levelling.<br />
• Maximum Cylinder Mains Pressure: 3 bars.<br />
• Maximum Cylinder temperature: 95 °C.<br />
• Special modifications on customers desire possible.<br />
Type Nominal ø with Height with Weight Code<br />
capacity/l insulation/mm insulation/mm kg number<br />
PS-200 200 710 1090 55 18728<br />
PS-500 500 810 1650 90 18758<br />
PS-750 750 910 1980 120 18788<br />
PS-1000 1000 960 2240 170 18852<br />
PS-1500 1500 1160 2340 230 18818<br />
PS-2000 2000 1260 2365 270 18828<br />
<strong>Flamco</strong> b.v.<br />
P.O. Box 115<br />
2800 AC Gouda - Holland<br />
Phone: +31 182 591800<br />
Fax: +31 182 522557<br />
info@flamco.nl<br />
www.flamco-export.com 185.01.457
<strong>Flamco</strong> <strong>Flamco</strong> Hot <strong>Water</strong> Tanks<br />
for potable water, chilled<br />
and heating installations
• Certified glass line process<br />
• Certified materials<br />
• Very high thermal outputs<br />
• Wide range of products<br />
• Wide range of accessories<br />
• Insulations in many colours,<br />
according to strict<br />
environmental rules<br />
• According to the European<br />
Potable <strong>Water</strong> Approvals<br />
• No copper used in the tanks<br />
<strong>Flamco</strong> Hot <strong>Water</strong> Tanks for potable<br />
water, chilled and heating installations<br />
<strong>Flamco</strong> hot water heaters (calorifiers) and storage tanks are made from top quality<br />
materials, giving you very high thermal outputs and preventing energy loss. The DUO,<br />
SP/E, and <strong>Supastor</strong> ranges provide a modern solution for your potable water installation.<br />
The TS-range is designed to carry your boiler and, due to dimensions similar to your<br />
boiler, gives a uniform look. The U/HP range is because of the high amount of windings,<br />
the top of the range and can be fitted in-line with your wall boiler. Our storage tanks can be<br />
used in both potable (LS, LS/E) and cooling and heating installations (PS).<br />
<strong>Water</strong> <strong>Heaters</strong>/Calorifiers<br />
(Potable <strong>Water</strong> Installations)<br />
<strong>Flamco</strong> Hot <strong>Water</strong> Tanks<br />
Storage Vessels<br />
(Potable <strong>Water</strong> Installations)<br />
Storage Vessels<br />
(Cooling and Heating Installations)<br />
Duo-Range LS-Range PS-Range<br />
Duo Solar-Range LS/E-Range<br />
SP/E-Range<br />
U/HP-Range<br />
TS-Range<br />
<strong>Supastor</strong>-Range<br />
Mono<br />
DWH<br />
Check also our accessories<br />
programme for water heaters!
A range of economical, high<br />
performance enamelled indirect<br />
storage cylinders providing hot<br />
(potable) water for large domestic<br />
dwellings, flats with centralised<br />
services, commercial and<br />
industrial premises.<br />
DUO<br />
A range of economical, high<br />
performance stainless steel indirect<br />
storage cylinders providing hot<br />
(potable) water for large domestic<br />
dwellings, flats with centralised<br />
services, commercial and<br />
industrial premises.<br />
Duo Indirect <strong>Water</strong> <strong>Heaters</strong><br />
Type Nominal Coil ø with Height with Weight Thermal output Code<br />
capacity/l surface/m 2 insulation/mm insulation/mm kg in kW u. l/h* number<br />
DUO 150 150 0,6 560 1150 55 13 / 223 18317<br />
DUO 200 200 0,9 560 1450 70 24 / 414 18409<br />
DUO 300 300 1,4 560 1950 90 38 / 657 18415<br />
DUO 400 400 1,6 750 1630 139 42 / 729 18421<br />
DUO 500 500 2 750 1830 159 54 / 937 18427<br />
DUO 800 800 3,5 910 2250 250 84 / 1466 18380<br />
DUO 1000 1000 4,5 1010 2300 336 115 / 1996 18400<br />
DUO 1500 1500 6,4 1160 2400 475 144 / 2500 18450<br />
DUO 2000 2000 7,3 1260 2440 600 180 / 3135 18460<br />
DUO SOLAR<br />
Type Nominal Coil ø with Height with Weight Thermal output Code<br />
capacity/l surface/m 2 ** insulation/mm insulation/mm kg in kW u. l/h* number<br />
DUO-Solar 300 300 0,8/1,4 560 1950 110 21 / 364 _ 38 / 657 18225<br />
DUO-Solar 400 400 1,0/1,6 750 1630 160 26 / 451 _ 42 / 729 18231<br />
DUO-Solar 500 500 1,0/2,0 750 1830 180 26 / 451 _ 54 / 937 18237<br />
SP/E<br />
Duo-Range and Duo Solar-Range <strong>Water</strong> heaters<br />
• Indirect type, high-quality enamelling, with insulation and<br />
thermometer.<br />
• Permanently welded in heat exchangers.<br />
• Compatible with all modern heating systems.<br />
• Insulation: up to 500 l: CFC free hard foam (with easy clean,<br />
outer plastic shell).<br />
• Insulation: from 800 l to 2000 l: 80 mm CFC free assemblyfriendly<br />
soft foam (with easy clean, outer plastic shell).<br />
• Connection facilities for additional heat sources.<br />
* First flow temperature 80 ºC and water heating from 10 to 60 ºC.<br />
** Top/down coil.<br />
SP/E indirect <strong>Water</strong> <strong>Heaters</strong><br />
SP/E-Range <strong>Water</strong> <strong>Heaters</strong><br />
• Indirect storage type, double shell stainless steel with<br />
insulation and control top.<br />
• Robust double skinned heat exchanger.<br />
• Internal storage vessel is made from stainless steel,<br />
(Outer shell – mild steel).<br />
• Insulation: up to 300 l: CFC free hard foam (with easy clean,<br />
outer plastic shell).<br />
• Insulation: 500 l: 80 mm CFC free assembly-friendly soft<br />
foam (with easy clean, outer plastic shell).<br />
• Fitted with dip pipe for temperature sensor and built in<br />
thermostat.<br />
• Quality enamelling to DIN 4753/Part 3 for hygienic water<br />
supply and top corrosion protection in connection with Mg<br />
or impressed anode.<br />
• Assembly-friendly and largely maintenance free construction.<br />
• Adjustable feet for accurate levelling (Standard from 800 l).<br />
• Low tendency to calcinations due to smooth surfaces.<br />
• Maximum operating overpressure - cylinder/coil: 10/16 bars.<br />
• Maximum operating temperature - cylinder/coil: 95/110 °C.<br />
• Special execution for solar installations (Duo-Solar).<br />
• Assembly-friendly and largely maintenance free construction.<br />
• Low tendency to calcinations due to rippled surfaces.<br />
• Adjustable feet for accurate levelling.<br />
• Thermometer supplied.<br />
• Maximum operating overpressure - internal (water) /external<br />
(heating) vessel: 10/3 bars.<br />
• Maximum operating temperature - internal (water) /external<br />
(heating) vessel: 95/110 °C.<br />
Type Nominal Coil ø with Height with Weight Thermal output Code<br />
capacity/l surface/m 2 insulation/mm insulation/mm kg in kW u. l/h* number<br />
SPE/E-130 130 1,54 560 1240 93 22 / 382 18475<br />
SPE/E-170 170 1,94 560 1510 107 28 / 485 18485<br />
SPE/E-300 300 1,65 660 1570 160 40 / 688 18482<br />
SPE/E-500 500 3,58 860 1950 240 63 / 1094 18490<br />
* First flow temperature 80 ºC and water heating from 10 to 60 ºC.
A range of water heaters providing the<br />
best thermal output and reducing the<br />
loss of energy to a minimum.<br />
U/HP<br />
A range of compact and small water<br />
heaters providing hot (potable) water<br />
which can carry a boiler and thus<br />
form one unit with your boiler to<br />
reduce the loss of space.<br />
U/HP indirect <strong>Water</strong> <strong>Heaters</strong><br />
U/HP-Range <strong>Water</strong> <strong>Heaters</strong>:<br />
• High thermal output, because of high amount of windings.<br />
• Can also be used in district heating installations.<br />
• Insulation: CFC free hard foam (with easy clean, outer<br />
plastic shell).<br />
• Thermometer and dip pipe supplied.<br />
• High-quality enamelling to DIN 4753/Part 3 for hygienic water<br />
supply and corrosion protection in connection with Mg or<br />
impressed anode.<br />
TS indirect <strong>Water</strong> <strong>Heaters</strong><br />
TS-Range <strong>Water</strong> <strong>Heaters</strong>:<br />
• Stabile construction to carry your boiler<br />
(maximum weight = 300 kg).<br />
• No loss of place due to smart design.<br />
• Insulation: CFC free hard foam (with outer metal shell).<br />
• Thermometer supplied.<br />
• High-quality enamelling to DIN 4753/Part 3 for hygienic water<br />
supply and corrosion protection in connection with Mg or<br />
impressed anode.<br />
• Low tendency to calcinations due to smooth surfaces.<br />
• Compatible with all modern heating systems.<br />
• Maximum operating overpressure - cylinder/coil: 10/16 bars.<br />
• Maximum operating temperature - cylinder/coil: 95/110 °C.<br />
Type Nominal Coil ø with Height with Weight Thermal output Code<br />
capacity/l surface/m 2 insulation/mm insulation/mm kg in kW u. l/h* number<br />
U/HP-110 110 1,1 550 870 55 29 / 509 19070<br />
U/HP-160 160 1,3 550 1120 70 37 / 644 19075<br />
TS<br />
* First flow temperature 80 °C and water heating from 10 to 60 °C.<br />
• Adjustable feet for accurate levelling.<br />
• Compatible with all modern heating systems.<br />
• Maximum operating overpressure - cylinder/coil: 10/16 bars.<br />
• Maximum operating temperature - cylinder/coil: 95/110 °C.<br />
Type Nominal Coil ø with Height with Weight Thermal output Code<br />
capacity/l surface/m 2 insulation/mm insulation/mm kg in kW u. l/h* number<br />
TS-150 150 0,7 970 x 700 x 640 75 19141<br />
TS-200 200 0,9 1150 x 700 x 640 85 19151<br />
* First flow temperature 80 °C and water heating from 10 to 60 °C.<br />
<strong>Flamco</strong>, your partner<br />
in every installation project