LTP 61 Shut-off Nutrunner - Atlas Copco

8
How many tools do
you really need in your
workshop?
A shut-off nutrunner is a sophisticated tool. But for
many workshops it has not been economically viable
to own an advanced wrench that performs just one
dedicated task. However, with three simple accessories,
you can use one LTP 61 for dozens of different jobs.
And that means a sophisticated tool has now become
a very economical one too.
Multi-Torque Selector
Transform one nutrunner into four: the Multi-Torque
Selector allows you to preset four different torque
levels per tool. Order ready-mounted or as an accessory
to existing LTP 51 and 61 nutrunners.
Multi-Point Reaction Bar
In many workshops, an application that requires a
different torque also requires a different reaction
point. The Multi-Point Reaction Bar features a sliding
bracket that gives you a number of different reaction
points.
S-Bar – straight out of the box
A blank reaction bar has to be bent, cut or welded
– an extra “to do”. The geometry of the S-Bar has
been optimized to provide a maximum number of
reaction points. This means you’ll be able to use
the S-Bar in about 70-80 percent of all applications
straight out of the box.