Product manual XBTGC | 2 MB - BERGER - POSITEC

Overview
I/O Type Description Connector Reference Thickness in Thickness
mm (in)
Type
Analog 2 Analog Input 0...10 V /4...20 mA Removable / TM2 AMI2HT 23.5 (0.925) B
1 Analog Output 0...10 V /4...20 mA
Screw type
TM2 AMO1HT
2 Analog Input 0...10 V / 4...20 mA,
1Analog Output 0...10 V / 4...20 mA
TM2 AMM3HT
2 Analog Input Thermo / PT100,
1Analog Output 0...10 V / 4...20 mA
TM2 ALM3LT
2 Analog Input Thermo TM2 AMI2LT
2 Analog Input 0...10 V /4...20 mA /
PT/NI100 / PT/NI1000
TM2 AMI4LT
8 Analog Input 0...10 V /4...20 mA TM2 AMI8HT
8 Analog Input PTC/NTC TM2 ARI8HT
2 Analog Output +/- 0...10 V TM2 AVO2HT
2 Analog Input 0...10 V / 4...20 mA,
2Analog Output 0...10 V / 4...20 mA
TM2 AMM6HT
8 Analog Input PT100/1000 TM2 ARI8LT
8 Analog Input PT100/1000 RJ11 TM2 ARI8LRJ
Allowed Combination Principle
To maintain vibration and shock resistance, the total width of the expansion modules
must be less than 60 mm (2.36 in), unless using the hook XBT ZGCHOK for
23.5 mm (0.925 in) and 17.6 mm (0.69 in) modules.
EQUIPMENT DISCONNECTION
NOTICE
Ensure that the total width of the expansion modules does not exceed 60 mm
(2.36 in) without using the XBT ZGCHOK security hook.
Ensure that the XBT ZGCHOK security hook is properly mounted if the width of
the modules exceeds 60 mm (2.36 in).
With the XBT ZGCHOK security hook properly mounted, ensure that the total
width of the expansion modules does not exceed 70.5 mm (2.77 in).
Failure to follow these instructions can result in equipment damage.
The following tables describe the possible allowed combinations of modules, using
the thickness type designation found in the table above.
22 35016393 11/2012