Product manual XBTGC | 2 MB - BERGER - POSITEC

More documents

Recommendations

Info

Overview 1.3 Part Names and Functions Introduction The following section describes part functions of XBT GC Series units. What Is in This Section? This section contains the following topics: Topic Page XBT GC1000 Series: Parts Description 25 XBT GC2000 Series: Parts Description 27 24 35016393 11/2012
XBT GC1000 Series: Parts Description Description Overview Label Part name Description A Status LED Indicates the status of: the XBT GC (e.g. power input, firmware RUN status or backlight condition) the logic program execution B See table below. AUX Unit Interface / Expansion Unit (EXT2) Interface where additional units such as communication devices can be connected. C Expansion Module Interface (EXT1) Interface to mount the Expansion Module. D Power Plug Connector Used to connect external 24 VDC power supply to terminal. E USB Host Interface (USB) Conforms to USB1.1. (TYPE-A connector) Power Supply Voltage: 5 VDC 5% Output Current: 500 mA (at maximum) Connects a data transfer cable or USB-compatible printer. The maximum communication distance is 5 m (16.4 ft). F DIO Interface (DIO) Interface to mount external I/O equipment using the DIO connector. 35016393 11/2012 25
Page 1 and 2: 35016393.05 Magelis XBTGC HMI Contr
Page 3 and 4: Table of Contents Safety Informatio
Page 5 and 6: Important Information NOTICE Safety
Page 7 and 8: At a Glance Document Scope Validity
Page 9 and 10: EXPLOSIVE POTENTIAL DANGER Only us
Page 11 and 12: Introduction Magelis XBTGC HMI Cont
Page 13 and 14: Overview of the Product Range XBT G
Page 15 and 16: EDIT Mode Peripherals XBT GC Unit 1
Page 17 and 18: EDIT Mode Peripherals XBTGCUnit 2 N
Page 19 and 20: Accessories USB Host Interface Seri
Page 21 and 22: I/O Expansion Modules I/O Expansion
Page 23: XBT GC1000 Allowed Combination Comb
Page 27 and 28: XBT GC2000 Series: Parts Descriptio
Page 29 and 30: Introduction Magelis XBTGC HMI Cont
Page 31 and 32: General Specifications Electrical S
Page 33 and 34: Performance Specifications Performa
Page 35 and 36: Interface Specifications Specificat
Page 37 and 38: Input Derating WARNING Specificatio
Page 39 and 40: Output Specifications Specification
Page 41 and 42: internal circuit internal circuit X
Page 43 and 44: Specifications Pulse/PWM Output Spe
Page 45 and 46: Procedure Specifications (1) Wire s
Page 47 and 48: XBT GC1000 Series Dimensions Instal
Page 49 and 50: Panel Cut Dimensions Specifications
Page 51 and 52: 2.2 XBT GC2000 Series Specification
Page 53 and 54: Characteristics Specifications Elec
Page 55 and 56: Display Specifications NOTE: Specif
Page 57 and 58: Interface Specifications Presentati
Page 59 and 60: In the case of RS422 / RS485 : Spec
Page 61 and 62: Input Specifications Characteristic
Page 63 and 64: Input Circuit Output Specifications
Page 65 and 66: Internal circuit Internal circuit I
Page 67 and 68: WARNING Specifications OUTPUT SHORT
Page 69 and 70: Wiring to the DIO Connector Introdu
Page 71 and 72: Use the following procedure to conn
Page 73 and 74: Cable Attached Dimensions Specifica
Page 75 and 76:
Installation Fasteners Specificatio
Page 77 and 78:
Magelis XBTGC HMI Controller Sample
Page 79 and 80:
Output Source Type NOTE: Sample of
Page 81 and 82:
Introduction Magelis XBTGC HMI Cont
Page 83 and 84:
Stage Description Installation and
Page 85 and 86:
Installation and Wiring Be sure tha
Page 87 and 88:
Installation procedure: Step Action
Page 89 and 90:
4.2 Wiring Considerations Introduct
Page 91 and 92:
Connecting the Power Cord NOTE: Pow
Page 93 and 94:
Installation and Wiring Connect a l
Page 95 and 96:
Installation and Wiring The followi
Page 97 and 98:
Installation and Wiring Protective
Page 99 and 100:
Installation and Wiring Check that
Page 101 and 102:
Wiring Considerations Presentation
Page 103 and 104:
Installation and Wiring Emergency S
Page 105 and 106:
Interlock Circuit 2 Installation an
Page 107 and 108:
XBT ZGABE1 Cable Installati
Page 109 and 110:
XBT ZGABE2 Cable XBT
Page 111 and 112:
XBT GC2 0T ABE 7E16EPN20 (16I Sourc
Page 113 and 114:
XBT GC1000 Series: USB Cable Clamp
Page 115 and 116:
XBT GC2000 Series: USB Cable Clamp
Page 117 and 118:
Removal Procedure: Installation and
Page 119 and 120:
Introduction Magelis XBTGC HMI Cont
Page 121 and 122:
Periodic Check Points Introduction
Page 123 and 124:
WARNING LOSS OF PANEL OR CABINET IN
Page 125 and 126:
Magelis XBTGC HMI Controller Index
show all

Product manual XBTGC | 2 MB - BERGER - POSITEC

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?