FB_CAT_210x297_0905_p.37-72 GB OK - "Brothers" Music Shop

VERVE 18S
1200W / 4 ohm - 129dB SPL
Sub-Woofer System
> Bass reflex cabinet with 460mm (18”) woofer
> Enclosure in 18mm (0,70") birch plywood,
scratch & scuff paint resistant finish
> B&C 460mm (18”) die cast frame
woofer with 100mm (4”) diameter
coil at high linear excursion
> Crossover filter is not integrated (external
electronic crossover is required)
> Input control panel with 2 NL-4 Neutrik TM
Speakon inputs and Link out connectors
for easy connection of several
speakers in parallel
> 3 M10 anchoring points,
2 metal carrying handles
> Precise wide extension of Low frequencies
down to 35 Hz
VERVE
speaker systems
VERVE 18S VERVE 15S
700W / 4ohm - 126dB SPL
Sub-Woofer System
> Sub-woofer system. Bass reflex cabinet with 380 mm
(15”) woofer
> Enclosure in 18mm (0,70") birch plywood,
scratch-resistant finish
> B&C 380mm (15”) diec cast frame
woofer with 75mm (3”) diameter voice
coil at high linear excursion
> Crossover filter is not integrated (external electronic
crossover is required)
> Input control panel with 2 NL-4 Neutrik TM Speakon
inputs and Link out connectors for easy connection
of several speakers in parallel
> 3 M10 anchoring points,
2 metal carrying handles
> Precise wide extension of Low frequencies
down to 40 Hz
37
VERVE 15S

verve
speaker systems
VERVE 15M VERVE 12M
500W / 8ohm - 125dB SPL
Coaxial Monitor Speaker System
> 2-way bass-reflex, B&C 380 mm (15”) die cast frame
woofer and HF compression driver with 44 mm (1.7")
diameter voice coil
> Enclosure in 15mm (0,59") birch plywood,
scratch & scuff resistant paint finish with 45°
monitor taper
> B&C HF titanium compression driver
with 44 mm voice coil (1.7”) and 2 mm
(1”) exit coaxially mounted to 380mm
(15”) B&C woofer with 64mm (1.7”)
diameter voice coil
> 90° conical aluminium horn coaxially mounted
to 380mm (15”) woofer
> Passive filter featuring ‘soft-trip’ circuitry for LF and
HF drivers
> Input control panel with 2 NL-4 Neutrik TM Speakon
inputs and Link out connectors for easy connection of
several speakers in parallel
> 2 Metal carrying handles
> Specifically designed frequency response for
nearfield use as a floor stage monitor
> Exceptional coherent sound diffusion over the entire
dispersion angle without the lobbing phenomena
often associated with conventional 2-way
enclosures.
VERVE 15M
38
300W / 8ohm - 123dB SPL
Coaxial Monitor Speaker System
> 2-way bass-reflex, B&C 320 mm (12”) die cast frame
woofer and HF compression driver with 36 mm (1.4")
diameter voice coil
> Enclosure in 15mm (0,59") birch plywood,
scratch & scuff resistant paint
finish with 45° monitor taper
> B&C HF titanium
compression driver with
36 mm voice coil (1.4”)
and 25 mm exit (1”)
coaxially mounted to 320
mm (12”) B&C woofer
with 51 mm (1.7”)
diameter voice coil
> 90° conical aluminium horn
coaxially mounted to 320 mm (12”) woofer
> Passive filter featuring ‘soft-trip’ circuitry
for LF and HF drivers
> Input control panel with 2 NL-4 Neutrik TM Speakon
inputs and Link out connectors for easy connection of
several speakers in parallel
> 35mm (1,4”) top-hat for speaker stand and wall
bracket mounting, 1 metal carrying handle
> Specifically designed frequency response for
nearfield use as a stage monitor
> Exceptional coherent sound diffusion over the entire
dispersion angle without the lobing phenomena
often associated with conventional 2-way enclosures
> Multi-functional enclosure design:
full-range “Front of House” speaker
use or floor stage monitor
VERVE 12M

BOX 122 Directional truss clamp
BOX 119 Directional wall mount
BOX 121
Adjustable adapter
for stand
BOX 30BK
Adjustable floor stand
(3,5 cm ø- 1.38")
BOX 118
Stand adapter
BOX 30BK
Adjustable floor
stand (3,5 cm ø- 1.38")
VERVE 8M
VERVE
speaker systems
VERVE 8M
250W / 8 ohm - 119dB SPL
Coaxial Monitor Speaker System
> 2-way bass-reflex, B&C 200mm (8”) woofer and HF
compression driver with 36mm (1.4) diameter coil
> Enclosure in 15mm (0.59") birch plywood, scratch &
scuff resistant paint finish with 45° monitor taper
> B&C HF titanium compression driver
with 36mm (1.4”) voice coil and 25 mm
(1”) exit coaxially mounted to 200mm
(8”) B&C woofer with 51mm (1.7”)
diameter voice coil
> 100° conical aluminium horn coaxially mounted to
200 mm (10”) B&C die cast frame woofer with 51
mm (1.7”) diameter voice coil
> Passive filter featuring ‘soft-trip’ circuitry for LF
and HF drivers
> Input control panel with 2 NL-4 Neutrik TM Speakon
inputs and Link out connectors for easy connection
of several speakers in parallel
> 4 M 6 omni-mount anchoring points
> Specifically designed frequency response for
nearfield use as a stage monitor
> Exceptional coherent sound diffusion over the
entire dispersion angle without the lobing
phenomena often associated with conventional
2-way enclosures
39
VERVE 8M

verve
speaker systems
TECHNICAL SPECIFICATIONS
Model Verve 215 Verve 152 Verve 15 Verve 12 Verve 10 Verve 18S Verve 15S Verve15M Verve 12M Verve 8M
Configuration way
2 2 2 2 2 1 1 2 coaxial 2 coaxial 2coaxial
Recommended amplifier Wrms
1400 700 400 300 250 1200 700 500 300 250
Nominal impedance AES W 700 350 200 150 125 600 350 250 150 125
Frequency response IEC 268-5 W 2800 1400 800 600 500 2400 1400 1000 600 500
Nominal impedance ohm 4 8 8 8 8 4 4 8 8 8
Frequency response @-6dB 47hz - 18kHz 47hz - 18kHz 50hz - 18kHz 50hz - 18kHz 50hz - 18kHz 35hz - 150kHz 40hz - 200kHz 60hz - 18kHz 65hz - 18kHz 75hz - 18kHz
Low frequency woofer mm 1 x 380 1 x 380 1 x 380 1 x 320 1 x 250 1 x 460 1 x 380 1 x 380 1 x 320 1 x 200
coil ø 75 coil ø 75 coil ø 65 coil ø 51 coil ø 51 coil ø 100 coil ø 75 coil ø 65 coil ø 51 coil ø 51
inch 1 x 15 1 x 15 1 x 15 1 x 12 1 x 10 1 x 18 1 x 15 1 x 15 1 x 12 1 x 8
coil ø 3 coil ø 3 coil ø 2,5 coil ø 2 coil ø 2 coil ø 4 coil ø 3 coil ø 2,5 coil ø 2 coil ø 2
High frequency driver mm 1 x 51 + horn 1 x 51 + horn 1 x 25 + horn 1 x 25 + horn 1 x 25 + horn - - 1 x 25 + horn 1 x 25 + horn 1 x 25 + horn
inch 1 x 2 + horn 1 x 2 + horn 1 x 1 + horn 1 x 1 + horn 1 x 1 + horn - - 1 x 1 + horn 1 x 1 + horn 1 x 1 + horn
Sensitivity (@1W/1m) dB 101 98 98 98 97 98,5 97,5 98 98 95
Maximum SPL dB 132,5 126,5 125 123 121 129 126 125 123 119
Dispersion H x V 60° x 40° rotatable 60° x 40° rotatable 80° x 50° rotatable 80° x 50° rotatable 80° x 50° rotatable omnidirectional omnidirectional 90° x 90° 90° x 90° 100° x 100°
Crossover frequency kHz 1,6 1,6 1,8 2 2,2 100 external 100 external 1,8 1,8 2,2
Input connectors 2 x Neutrik 2 x Neutrik 2 x Neutrik 2 x Neutrik 2 x Neutrik 2 x Neutrik 2 x Neutrik 2 x Neutrik 2 x Neutrik 2 x Neutrik
Speakon NL-4 Speakon NL-4 Speakon NL-4 Speakon NL-4 Speakon NL-4 Speakon NL-4 Speakon NL-4 Speakon NL-4 Speakon NL-4 Speakon NL-4
Net dimensions (WxHxD) mm 513x1222x425 432x779x405 432x729x405 381x630x360 328x550x316 506x604x636 432x540x550 432x570x380 381x530x312 270x370x266
inch 20,19x48,11x16,73 17,00x30,67x15,94 17,00x28,70x15,94 15,00x24,80x14,17 12,91x21,65x12,44 19,92x23,78x25,04 17,00x21,26x21,65 17,00x22,44x14,96 15,00x20,87x12,28 10,63x14,57x10,47
Net weight kg 46 27 21 16 14 40 28 22 15 9
lb 101,41 59,52 46,29 35,27 30,86 88,10 61,73 48,50 33,06 19,84
Transport dimensions (WxHxD) mm 600x1300x520 520x860x490 470x820x520 440x715x455 405x635x390 600x680x715 535x625x625 510x650x455 460x600x380 345x445x345
inch 23,62x51,18x20,47 20,47x33,86x19,29 18,50x32,28x20,47 17,32x28,15x17,91 15,94x25,00x15,35 23,62x26,77x28,15 21,06x24,61x24,61 20,08x25,59x17,91 18,11x23,62x14,96 13,58x17,52x13,58
Transport weight kg 50,5 31 24,2 18,9 15,6 43,7 31 22,8 17,2 11
lb 111,33 68,34 53,35 41,67 34,39 96,34 68,34 50,26 37,92 24,25
Note: SPEAKON is a NEUTRIK ® registered trademark
40

FBTMAXX TM

An international bestseller. Thanks to its highly
popular positioning in terms of technological level
and price, this speaker system has been the subject
of frequent imitation although it has never been
equalled. The new entries, represented by the 400W
(PWM) +100W rms bi-amped FBTMaxx 5A and the
FBTMaxx 10 SA subwoofer with a 900W rms power
amplifier, serve to enhance this highly successful range.
The main features shared by all models in the range
include: rugged and ultra-light enclosure
in gas injection moulded polypropylene.
Flowing lines and rounded corners for the maximum
versatility of application as a stage monitor and for
wall or ceiling installation or, with the addition of
special adapters, for stacked configurations.
Exceptional accessibility of controls for all application
conditions, FBTMaxX is the perfect
combination of weight, cutting-edge
technology, high performance, and
unparalleled cost-effectiveness.
FBTMAXX 6A
FBTMAXX 6

FBTMAXX 4A
FBTMAXX 4
FBTMAXX 9SA
FBTMAXX 9S
FBTMAXX 5A
FBTMAXX 5
FBTMAXX 2A
FBTMAXX 2
FBTMAXX 10SA
FBTMAXX 2A
FBTMAXX 2
FBTMAXX TM
speaker systems
All the speakers are fitted for wall or ceiling
installation, horizontally or vertically, using
the specific mounts.
The photo shows FBTMaxX 4 in its horizontal version.
Speakers 10”, 12” and 15”
custom neodymium ultra-light
and ultra powerful.
43
FBTMAXX 4A
FBTMAXX 4
PWM power stages, three
times more efficient than
conventional technology.
ADAP ®
A processor for total
component protection.

FBTMAXX TM
speaker systems
FBTMAXX 6A
700+200W
Processed Active Monitor
> Extremely light and sturdy enclosure made of
polypropylene with gas injection moulding.
> Custom horn, handled and stand adapter built into
the structure
> It can be used in all audio-professional
amplification systems
> Profile for use as a stage monitor
> Four anchoring points (M10) for wall and ceiling
installation
> Full access to controls in all conditions of use
> 2-way bi-amplification system:
- woofer with power stage of
700W rms with PWM “Pulse Width
Modulation” technology
- driver/horn with power stage of 200W rms
in class G
> 380mm (15") custom B&C
speaker with 75mm (3") coil with
neodymium magnet, ultra-light and
ultra powerful. Die-cast
aluminium basket
> Compression driver with 65mm coil
and 36mm (1.4") shaft
> ADAP ® (Advanced Dynamic
Active Protection) processor for total
transducer protection and optimized acoustic
response. It guarantees total reliability even under
the harshest conditions (prolonged Larsen effect)
> Active electronic filter 24 dB/oct
> Control panel highly professional with XLR/Jack
Neutrik input
XLR Neutrik Link
Gain plus 3-band equalizer (High-Mid-Low)
Volume
FBTMAXX 6
700W
Sound Reinforcement Monitor
available in the passive version with 4 or 8ohm
44
V33
Nylon case
FBTMAXX 6A
FBTMAXX 6

FBTMAXX 5A
FBTMAXX 5
FBTMAXX 5A
FBTMAXX 5
FBTMAXX TM
speaker systems
FBTMAXX 5A
400+100W
Processed Active Monitor
> Extremely light and sturdy enclosure made of gas
injection moulded polypropylene
> Custom horn, ergonomic carry handles and stand
adapter built into the cabinet
> Ideal for use in all professional audio amplification
systems
> Asymmetrical Profile for use
as a stage monitor
> Four (M10) anchoring points for wall and ceiling
installation
> Unimpeded access to controls in all application
conditions
> 2-way bi-amped system
- Woofer with 400W rms (PWM)
power amp featuring “Pulse Width
Modulation” technology
- HF driver/horn with 100W rms class AB power amp
> 380mm (15") B&C Diecast aluminium
chassis custom LF driver with 64mm (2.5")
coil and powerful ultra-light neodymium magnet.
> 25mm (1") HF compression driver with 36mm (1.4") coil
> ADAP ® (Advanced Dynamic Active
Protection) processor for total protection of the
drivers and optimisation of acoustic response.
Assures total reliability even under extreme
conditions (prolonged acoustic feedback)
> Active electronic filter (24 dB/oct.)
> Control panel highly professional with XLR/Jack
Neutrik input
XLR Neutrik Link
Gain plus 3-band equalizer (High-Mid-Low)
Volume
45
FBTMAXX 5
400W
Sound Reinforcement Monitor
available in a 4 or 8ohm passive
version