Shower Tray Fitting - Aqualux Shower Enclosures
Shower Tray Fitting - Aqualux Shower Enclosures
Shower Tray Fitting - Aqualux Shower Enclosures
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
33<br />
33<br />
!<br />
!<br />
Ensure that Locking Key is set in<br />
a fixed position, as shown in Fig.D<br />
(on previous page).<br />
Locking key should be flush with<br />
top of the board.<br />
Check fit of tray<br />
& skirt match.<br />
! Remove skirt.<br />
!<br />
Mix a stiff 5/1 composition of sand and<br />
cement or use ready-mixed prepared to<br />
manufacturers instructions.<br />
!<br />
Do not mix cement on board itself to<br />
prevent excess moisture ingress. Take<br />
! precautions when handling cement /<br />
mortar.<br />
Thoroughly mix and spread with high<br />
spots to contact tray underside - ensure<br />
all of the tray well is fully supported.