Data Sheet (current) - Jameco Electronics
Data Sheet (current) - Jameco Electronics
Data Sheet (current) - Jameco Electronics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WRS2000 hot gas rework station<br />
ESD SAFE<br />
• Electronically controlled, ESD-safe hot gas<br />
rework station<br />
•Multiple SMD functions in one unit:<br />
- Pick and place using vacuum pick-up<br />
- Dispensing of solder paste, flux, or adhesives<br />
- Soldering and desoldering of components<br />
•Operates from inert gas or compressed air source<br />
•All functions are activated with either hand or<br />
foot switch<br />
•Compatible with Weller and Ungar soldering and<br />
desoldering irons<br />
•Complete listing of nozzles for hot air pencil on<br />
page Weller 68<br />
•Hot air pencil temperature control: 300°F - 1000°F<br />
•Power supply: 145W<br />
•Dimensions: 9.5” x 10.6” x 4.25”<br />
•Current: 120V AC, 50-60 Hz<br />
• Compressed air pressure required: 43.5 - 116.0 psi<br />
• Hot air pencil: 100W<br />
• Will accommodate optional Weller and Ungar soldering<br />
irons from 25 - 80W and desoldering irons<br />
from 50 - 80W<br />
Cat. UPC Shelf Pack Wt. Shelf<br />
No. No. Description lb kg Pack<br />
WRS2000 037103125460 Rework station with HAP1 hot air pencil, vacuum pick-up, dispensing, 16 7.3 1<br />
manual remote control, foot pedal, and stands