Data Sheet (current) - Jameco Electronics
Data Sheet (current) - Jameco Electronics
Data Sheet (current) - Jameco Electronics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
•Versatile attachment for W60P series iron<br />
•Permits operator to desolder and resolder with<br />
same tool<br />
•Wide range of desoldering tiplets available, see<br />
page Weller 73<br />
DS60 Desoldering adapter<br />
Cat. UPC Shelf Pack Wt. Shelf<br />
No. No. Description lb kg Pack<br />
DS60 037103473974 Desoldering adapter 1.25 0.56 6<br />
•Precise temperature control reduces amount of time<br />
boards and surrounding components are subjected<br />
to thermal stress<br />
•Operates without expensive air pumps, allowing an<br />
inexpensive and simple way to rework and repair<br />
boards (requires compressed air or nitrogen)<br />
•Adapters allow the use of other manufacturers’<br />
nozzles<br />
•Precisely replaces chips as small as 5 mil pitch<br />
•Built-in vacuum pick-up. No guessing when chip is<br />
ready for removal<br />
•Complete range of nozzles available - see page<br />
Weller 67<br />
•Hand tool 700/750W Anti-static, double insulated<br />
cable<br />
•Power supply: 120V, 50/60Hz<br />
•Air flow: a supply of air flow (or inert gas) from an<br />
external source is required 50 - 90psi. Continuously<br />
adjustable from 10 - 50 liters/min<br />
•Air temp: 122°F - 1022°F ±86°F<br />
• Vacuum: created by venturi tube from external<br />
air supply<br />
• Standard equipment: power unit, hand piece, tool<br />
holder, and foot switch<br />
•Accessories: 31 interchangeable nozzles<br />
Surface mount products<br />
Hot air rework systems<br />
WHA700<br />
Cat. UPC Shelf Pack Wt. Shelf<br />
No. No. Description lb kg Pack<br />
WHA700 037103129666 SMT Hot Air Rework Station 11.8 5.4 1
Change language