Drip-Sembler - Tecnoideal Srl

Drip-Sembler
Semiautomatic assembly station for medical drip chambers
Partners in medical
device manufacturing

Design and specification subject to change without notice.
Code 00139 - Rev. 3 - 11/2001
Drip-Sembler is a semiautomatic
assembly station for medical drip
and expansion chambers
including filter insertion and
bonding of the relevant cover.
It is indicated for the
manufacturers of medical
devices like infusion sets,
transfusion sets and dialysis
blood lines.
- reduced components handling;
- thanks to the MEDICA DSV
dispenser, the assembled
chamber can be processed
immediately without waiting
for dry time compared to
other assembly methods.
Drip-Sembler is supplied with:
- two containers that can be
preloaded with the
components to be assembled.
The two containers are placed
in their own frame in front of
the operator; the containers for
the chambers and for the
assembled product are not
General Specifications
• MEDICA DSV solvent
dispenser with custom made
and interchangeable
dispensing bush.
• Custom made
andinterchangeable holders
for chamber housing and
filter.
• Safety system in compliance
Drip-Sembler operating desk
provided;
with norms 89/392/EEC: the
- a pneumatic tool for filter filter insertion in the chamber
insertion in the chamber; is made by the tool only if
- a solvent dispenser for easy, both hands of the operator
quick and reliable bonding are on start buttons.
between the chamber and the
relevant cover.
• Advanced technical
construction and oil free
Drip-Sembler main advantages
are the following:
- reduced manpower cost thanks
to an easier and faster
assembly method;
pneumatic system and
components of the highest
quality and reliability.
• Construction specifications
ensure suitability for use in
cleanrooms.
1. Pneumatic assembly of filter in the chamber
Power supply
230 VAC, 50 Hz,10 VA
or 110 VAC, 60 Hz, 10 VA
(Only for the MEDICA DSV
solvent dispenser)
Pneumatic system
- Oil-free, dry and clean air at
5 Bar
- 6 x 8 mm pneumatic tubing
supply fitting
- 20 nl/min max air
consumption
- Extra interchangeable
holders for other size of
chambers and filters are
available on request.
Produced by:
Drip-Sembler
Technical Specifications
Solvent dispenser
- MEDICA DSV type with
custom made dispensing
bush (to be specified at
purchase order)
- Extra interchangeable DSV
dispensing bush for other
size of chambers are
available on request
Working table
Frame construction of modular
anodized aluminium profiles
with white solvent resistant
operating desk
Dimensions (L x W x H)
120 x 75 x 110 cm
Weight : 40 Kg
Tecnoideal srl
Via L. Cazzuoli, 43 - 41037 MIRANDOLA (MO) - ITALY
Phone +39 0535 23653 - Fax +39 0535 27443
home page: www.tecnoidealsrl.com
e-mail: sales@tecnoidealsrl.com
2. Dispensing of solvent on the chamber for the assembly of
the relevant cover
Marketed in U.S.A., Canada & Mexico by : TECHNOMED, Inc.
Unit C, Building 3
112 Medical Village Drive
Wallace, NC 28466 - U.S.A.
www.technomedinc.com
Phone 910 285 5003
e-mail: technomed@ix.netcom.com Fax 910 285 5021
Marketed in South America by :
ALVIMed Ltda.
Jaguaré, São Paulo - Brasil
Phone/Fax +55 (0)11 3763 5260
e-mail: info@alvimed.com.br
www.alvimed.com.br
Marketed in UK and Éire by : PANMED Teo. - Tíréamonn,
Cill Aodha, Cathair Chinn Lis,
Co. Luimní - Éire
Panmed Phone +353 (0)61 384232
e-mail: panmed@iol.ie Fax +353 (0)61 384005
Marketed in Germany by : Montage-Automation, Dipl.-Ing. Peter Tölke
Am Mühlenacker 44, D-50259 Pulheim - Germany
Tel/Fax +49 (0)2234 8665 e-mai: montage-automation@onlinehome.de
www.montage-automation-toelke.de