The FT 200 A automatic cut-off machine - Anton Wimmer ...

The FT 200 A automatic cut-off machine – designed for
the professionals
Highlights
Accessories
The modern CNC of the machine
can be programmed with
up to 5 different rod lengths for
each rod, with different quantities
for each length, to use
the blank to the maximum. A
choice of 5 grinding profiles for
the various types of rods allow
you to optimise the grinding
cycles and reduce the risk of
breakage to the grinding disc.
The CNC is very user-friendly
and has a graphical assistance
as well as a help menu.
The commands are transmitted
via servo-drives, and also
thanks to precision guides and
high-precision ball screws an
accurate positioning is achieved.
The 3 kW drive can be equipped
with a stepless frequency
variator.
The precision grinding spindle
gives a very regular feed of
the grinding disc. The grinding
disc is laser measured and its
Ludwig Hunger Straße 1 • D - 86916 Kaufering
Tel: +49 (0) 8191 / 665-70 • Fax: +49 (0) 8191 / 665-20
www.anton-wimmer.de • Email: vertrieb@anton-wimmer.de
wear is automatically compensated.
The machine halts at
the minimum diamond layer of
the grinding disc.
The double clamping system
(on both sides of the grinding
disc) prevents chipping of the
rod. This system is sensor-monitored
to prevent breakage of
the rod or the grinding disc.
Optionally, we can equip the
machine with different loaders
for various applications and for
long bars (up to 6000 mm).
The machine can run either
with cutting oil or water-based
coolant. The coolant is monitored
by valves and its debit
is controlled. The disc feed
is stopped immediately if the
coolant supply is interrupted.
A strong coolant jet results in
a very nice surface condition
and a high precision of the cutoff
rod and increases the life of
the grinding disc.
Evacuation belt, dust-collector, filtration with decantation chambers or paper filter, frequency variator,
belt loader, bar loader, etc.
Applications
Tungsten carbide manufacturing – tool and die companies – medical industry – machine builders
– glass industry…. and many other applications
Technical n Data
Ø Range 1 - 32 mm
X axis path 420 mm
Grinding disc Ø 200 mm
Power supply 3 kW
Electricity supply 400 V - 50 Hz
Colours RAL 2002 RAL 5007
Machine weight ca. 700 kg
Dimensions LxBxH 1450x950x1700 mm
373.78.515.00 - 03/08

Automatically cut-off hard materials
For tungsten carbide, HSS, glass, ceramics, carbon fibres, etc.
•
•
•
•
•
•
•
•
FT 200A
Automatic CNC cut-off machine
CNC for feeds of workpiece and grinding disc allowing a high precision
Laser measuring of the grinding disc with automatic wear compensation
Loader (different solutions possible) allowing a long unsupervised operation
Automatic central greasing for all moving parts
Monitored clamping system to prevent breakage of the grinding disc or the rod
Coolant with flow control
Very short set-up times
Fully enclosed working area corresponding to the CE rules