Diagnostic Ultrasound System - KKMed

Diagnostic
Ultrasound
System
GENERAL DESCRIPTION
SDU-450XL, B/W Linear Convex scanner, employs software
controlled Digital System Manager (DSM) architecture.
DSM is realized by technology migration from SHIMADZU
state-of-the-art diagnostic imaging modalities, such as MRI.
DSM, powered by high performance RISC processor,
FEATURES
1. DSM controlled Multi-Dimensional Signal
Enhancement
DSM tunes multiple imaging parameters for
beamformation, echo signal processing, image
formation and temporal/spatial image processing in
real time to accomplish the best enhancement of total
system performance.
This revolutionary central operating environment
allows software to up-grade SDU-450XL to meet the
future application requirements.
2. Wide Aperture Imaging
Utilizing wide aperture beamforming provides
outstanding image uniformity and deeper penetration
beyond other ultrasound scanners in its class.
3. Full Spectrum Imaging Technology
Full Spectrum Imaging is the result of incorporation of
broad band beamformer technology and broad band
probe technology.
Over 10MHz imaging with extremely fine detail resolution
is now achievable for compact ultrasound scanner.
4. True Line image formation
Real time echo pixel relocation technology enables to
position each echo data at native place in the image
memory and makes edge of the organ more crisp -
True Line.
PD579-004
eliminates the need of many hardware, conventionally required
and makes SDU-450XL compact, lighter and more mobile.
And best of all, software controlled DSM architecture
provides extreme flexibility and sets SDU-450XL as the
system, open to the future.
5. Unparalleled Compact Design
DSM architecture allows to cut the number of
conventional hardware modules by half and leads to
compact design. Not like other small ultrasound
scanner, specific arrangement of mechanical
components provides superior capability for SDU-450XL
to carry peripheral equipment.
6. Digital Communication Path
SDU-450XL communicates with PC and download
images in original digital quality for long term storage
via PC-compatible PC-card and/or cable interface.
1

2
CONFIGURATION
STANDARD SETUP
• Main unit 1
• Probe hanger 1
• Probe holder 1
• Partition plate 2
• Power cable 1
• U/S jelly 1
• Fuse 1
• Instruction manual 1
OPTIONAL PROBES
SPECIFICATIONS
OPTIONS
• Probe selector
• Video printer
• Printer paper
• Foot switch
• ATA flash memory card
• Cine memory
Function;Search, replay, trimming for replay, adjustment
of replay speed, *storing images, and
measurement of replayed and stored images.
*More than 48 x 2 frames as loop memory (in
case of 256 scan lines image) can be stored.
The storage capacity is upgradable from 48 x 2
frames to more than 192 x 2 frames (in case of
256 scan lines image).
*Frame number depends on the scanning
conditions and probe.
Type Spec. Model Application
Convex 2.5-5.0MHz/13R VA13R-035U Cardiac, Abdominal
Convex 3.5-6.0MHz/13R VA13R-050U Cardiac, Abdominal
Convex 2.5-5.0MHz/57R VA57R-0375U Abdominal, Obstetrics
Convex 2.0-5.5MHz/57R VA57R-0375WU Abdominal, Obstetrics
Linear 6.0-12.0MHz/34mm L040-100U Mammography, Superficial
Linear 5.0-7.5MHz/60mm L070-075U Mammography, Superficial
Trans-vaginal 4.0-8.0MHz/11R TV11R-055U Ob/Gyn
Trans-rectal, bi-plane 5.0-8.0MHz/10R UB10R-065U Urology
Scan method Electronic Linear/Electronic Convex
Measurement Distance 4 channels
Monitor 12 inch High resolution, interlace
Area-Circumference 2 channels
Probe Connectors 2
Basic Distance, Area-Circumference, Angle,
Probe Frequency 2.5 – 12MHz
Volume, Time, Slope, Heart rate,
Display mode B mode, M mode, B/M mode, B/B mode
Histogram
Sweep speed 1.25 / 2.5 / 5 / 10 sec.
Obstetrics Fetal age, Fetal weight estimation,
Image depth 30 – 255 mm (16 steps)
Bio Physical Profile Report, Graph
Pan/Zoom Write zoom/Max. 15 steps
display, Twins function
STC 8 steps
Cardiology A.L. Method, L.V. function,
Gray scale 256 levels
Valve measurement, Report,
Focus Transmitting; Selectable up to 4 focal zones among 16
Gynecology Uterus, Ovary, Follicle ratio, Report
predefined location.
Urology Prostate, Bladder, Report
Focal zone moves to predefined location.
Others Vascular measurement function,
Receiving ; 16 focal zones
Hip scan, VCR Measurement
Image processing Dynamic range (B, M mode) ; 32dB - 80dB
Edge enhancement (B, M mode) ; 4 steps
Persistence ; 6 steps
Post Process
Posi./Nega. inversion
; 8 steps
Up/Down, Left/Right inversion, Rotation 90 degree
Frequency changing

CONTROL PANEL
18
9
10
13
12
11
5
31 30 29 28 27 19
14
15 7 2 16 8 4
1 STC SWITCH Adjust the gain at a specific depth
2 TRACKBALL Move the mark of measurement or
probe mark/Select an item
3 B GAIN VOLUME Adjust the gain signal
4 SETTING DIAL Change of each parameter
5 RECORD Record a displayed image by
video printer
6 FREEZE Freeze the image
7 SET Decide the input data
8 END End of operation
9 MENU Select each kind of operation
10 MEASURE Select each kind of measurement
11 CINE Select each kind of cine function
12 BODY MARK Input body mark
13 ANNOTATION Input characters on the screen
14 CALIPER Select caliper operation
15 FOCUS Select position or combinations of
focus
16 M-CURSOR Display of M-mode's Cursor
17
3
17 PAN Move the display position of
image
18 USER FUNCTION Select each kind of function
19 ZOOM Magnification of B mode image
20 HIQ High resolution mode
21 SIZE Set a desired image size
22 L-R FREEZE Change real mode or freeze mode
of each plane in Dual B mode
23 MODE Select a desired display mode
24 IMAGE REVERSE Reverse the image display
left/right
25 IMAGE Select image adjusting function
26 FREQUENCY Change of frequency
27 PROBE Select Probe connector
28 BIOPSY Select display of biopsy lines
29 HELP Select Help function
30 PRESET Select, register, or erase the preset
items
31 NEW PATIENT Input new patient name and
information
1
26
25
20
24
21
23
22
6
3

DIMENSIONS AND WEIGHT Unit : mm
Printed in Japan 6295-11005-30A-ADT
Main body
420
Remarks
* Every value in this Product Data Sheet is a standard value, and it may vary a little from the actual at each site.
* The appearances and specifications are subject to change for reasons of improvement without notice.
* Certain configurations may not be available pending regulatory clearance. Contact your Shimadzu representative for information on
specific configurations.
SHIMADZU CORPORATION. International Marketing Division
3. Kanda-Nishikicho 1-chome, Chiyoda-ku, Tokyo 101-8448, Japan Phone: 81(3)3219-5641 Fax. 81(3)3219-5710
URL http://www.shimadzu.com
Weight : 72kg
Power supply : AC 100-120V/200-240V, ±10%
450VA, 50/60Hz
Operational ambient : Temp. 5-40°C
temperature and
humidity range
Humidity 30-85%
I/O interface : Video signal (OUT 3 / IN 1)
Video printer remote control
RS-232C
Foot switch
Parallel IO
IC card interface (2 slots)
590
1220 ‘1370
Shimadzu Corporation’s Medical Systems Group was certified
for applying a quality system for design/development,
manufacturing, sales, installation and servicing of products in
accordance with ISO 9001 and EN 46001.