BUILT-IN GAS HOBS
BUILT-IN GAS HOBS
BUILT-IN GAS HOBS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CORRECT REPLACEMENT OF THE BURNERS<br />
It is very important to check that the burner flame distributor F and the cap C has<br />
been correctly positioned (see figs. 22 and 26) failure to do so can cause serious<br />
problems.<br />
Check that the electrode “S” (fig. 22) is always clean to ensure trouble-free sparking.<br />
In the models with safety device, check that the probe “T” (fig. 22) next to each<br />
burner is always clean to ensure correct operation of the safety valves.<br />
Both the probe and ignition plug must be very carefully cleaned.<br />
C<br />
F<br />
Figure 22<br />
S<br />
T<br />
Figure 23<br />
Figure 24<br />
A B<br />
19