Development Tools Focus Test & Measurement - Farnell

44
Test Equipment
Prices valid until 30th June 2009.
Find the latest products online at www.farnell.com
Oscilloscope,
7000 Series
DPO / MSO
MSO7104A
The 7000 Series has advanced technology that will allow you to see more subtle signal detail
and more infrequent events than any other scope on the market.
The 7000 Series offers bandwidths up to 1 GHz. Each model, equipped with a large 12.1” XGA
LCD display.
Features & Benefits
• Big display
• 23 automatic measurements with statistics
• Fastest architecture • AutoProbe interface
• Insightful applications • Bus mode display (on MSO models)
• High resolution mode • Analog HDTV/EDTV trigger
Model Bandwidth Sample rate Memory Scope channels Digital channels Update rate
DSO7012A
2
DSO7014A
100 MHz
MSO7012A
2 GSa/s 8 Mpts
4
2
MSO7014A
DSO7032A
4
2
16 Up to 100,000
deep-memory
waveforms
DSO7034A
350 MHz
MSO7032A
MSO7034A
2 GSa/s 8 Mpts
4
2
4
16
per second,
even with
deep memory,
digital
DSO7052A
DSO7054A
500 MHz
MSO7052A
4 GSa/s 8 Mpts
2
4
2
channels and
serial
decode turned
on.
MSO7054A
DSO7104A
4
16
MSO7104A
1 GHz 4 GSa/s 8 Mpts 4
16
Mftrs. Price Each
List No. Order Code 1+
DSO7012A 169-9811 2,921.00
DSO7014A 169-9812 3,536.00
DSO7032A 169-9813 4,267.00
DSO7034A 169-9814 5,439.00
DSO7052A 169-9815 5,585.00
DSO7054A 169-9816 6,933.00
DSO7104A 169-9818 8,508.00
MSO7012A 169-9819 4,136.00
MSO7014A 169-9820 4,737.00
MSO7032A 169-9821 5,378.00
MSO7034A 169-9822 6,751.00
MSO7052A 169-9823 7,956.00
MSO7054A 169-9824 8,717.00
MSO7104A 169-9825 10,729.00
PAT Tester, Handheld
The HPAT600 is a battery powered
portable Appliance Tester with the following
features:-
Dual Insulation Test Voltage - The
insulation measurement test voltage can be set to either
500V or 250V.
User Selectable Pass Levels - Appliance test pass levels
maybe user defined.
Easy or Fast Operating Modes - The HPAT600 can be
operated in either of two modes. In manual mode, aimed at
the newcomer to PAT testing, a connection diagram for the
selected test type is shown on the display. Each step of a test
requires user confirmation by a press of the OK button.
In the Auto mode, for the experienced operator, the HPAT600
will automatically run through a selected test sequence
without any further user interaction unless a failure is encountered.
IEC Lead Test - The HPAT600 can also be used to check IEC
leads for earth continuity, insulation, and polarity.
Test Data Memory Storage - The HPAT600 is able to store
test data for up to 200 appliances into memory.
Earth Continuity Earth Continuity
Test voltage: 4V DC (into open circuit) Accuracy: ± (5% reading + 2 digits)
Test current: 200mA DC (into short circuit) Default pass levels: Class I: 0.1 ±. Lead: 0.1 Ω
Range: 0 - 19.99Ω User selectable pass levels: 0.1Ω to 0.9Ω in 0.1Ω steps
Resolution:
General
0.01Ω
Overload protection: 300V AC/DC
Protection class: IP20
Safety: Complies to BS EN 61010-1:2001
Temperature Range: -10 to 40°C, non-condensing
Power supply: 6 x 1.2V AA NiMH rechargeable batteries
1800mAh, or greater
Dimensions: 90 x 210 x 54mm
Weight: Approx 700g (including batteries and leads)
Mftrs. Price Each
List No. Order Code 1+ 3+
HPAT600 167-0752 469.45 445.88
Fluke 113 True-RMS
Multimeter and 322
Clamp Meter
L=167.1, W=85.1, D=46, Weight=404g
The Fluke Electrician’s Combo kit is the perfect solution to meet the demands of Electrical
Professionals. This combo kit pairs the new Fluke 113 DMM with a Fluke 322 clamp meter for
productive and effective troubleshooting in one total solution. The 113 Multimeter has the
features needed to repair most electrical and electronic problems. This meter is simple-to-use
and has significant improvements over the original Fluke 7-600 and other basic multimeters.
Using the Fluke VCHEK LoZ low impedance measurement function, users can simultaneously
test for voltage and continuity. Added measurement functions include backlight,
Min/Max and capacitance.
Features and benefits:
Fluke 113 Multimeter
• VCHEK LoZ low impedance measurement function to simultaneously test for voltage
and continuity
• A large backlit display allows for easy visibility in low-lit areas
• True-rms for accurate AC measurements on non-linear loads
Fluke 322 Clamp Meter
• Rugged and compact: ideal for current measurements up to 400 A in tight cable compartments
• 0,01A resolution in the 40 A range
Mftrs. Price Each
List No. Order Code 1+
FLUKE 113/322 170-0076 140.00
Fluke 179 True-RMS
Multimeter and I400S
Clamp Meter
I400S:
All models offer true RMS AC voltage and current readings, 6000-count resolution, min-maxaverage
recording, as well as frequency and capacitance ranges. Despite all of these and
many other useful features, the 179 remains easy to use. The ergonomic case with integrated
holster protects the units in rough and tough environments. To change the batteries, the case
44 www.farnell.co.uk 08447 11 11 11 Fax: 08447 11 11 12