full specifications - Addlestone Model Centre

Century UK Razor 500 SE
The new Razor 500 SE is the sharpest model in the Century UK hanger
and is fully 3D capable at the flick of a switch.
Wielding a set of high strength carbon fibre blades with a 970mm disc
and carbon fibre paddles, things need to be strong and controllable, this
is handled in the form of a full CNC head and swash plate assembly,
with 120' CCPM and 3x 26g servos. A single 40g servo keeps the tail in
check as the belt driven carbon fibre tail blades do their thing via the
CNC tail box.
At the other end of the tail boom you will find the main gear and tail
pulley, nestled in between the carbon fibre framework, along with the
brushless hi-power motor and 60a brushless ESC, all connected to the
latest CUK 8 channel 2.4GHz receiver.
Out of the box, the Razor 500 SE wears a distinctively angular yellow
and white fibreglass canopy, with other optional colours available, for
high visibility during the hard manoeuvres it has been built to perform.
The battery needed to drive all of this is a 14.8v 3900mah - 22.2v
2500mah li-poly (not included) and when fitted gives a flying weight of
1900g so the model is heavy enough to withstand the wind, but light
enough to really dance when the sticks of the new Centra CUK-2801 8
channel computerised radio are pushed.
Product type: 500 size electric 3D
Helicopter
Main rotor dia: 970mm (with 430mm

Main blades)
Tail Rotor dia: 205mm (with 75mm
tail blades)
Overall length: 883mm
Flying weight: 1900g
Motor spec: Cased Outrunner
- 1600kVA (RPM/V)
Rotorhead: 120 degree CCPM
Required battery: 4s - 6s 2500mAh pack
This Helicopter comes with no outer retail box it has all the inner
packaging and a brown cardboard box for outside. The Helicopter is
brand new and as always tested by us.