FULL LINE CATALOG - Chief

FAQ
1. Does the PAC500 include the
swing arm?
A No. Order your choice of PNR
Dual Swing or MWR Single
Swing and then order the
PAC500.
2. Can the PAC500 be installed in
an existing home or office?
A Yes. The PAC500 is designed for
in-wall installation spanning a
minimum of 3 wood studs, 16"
on center. Simply cut out the
middle stud and add headers for
support. The PAC500 includes
trim to finish off the installation.
3. Is there a solution for screens
smaller than 40”?
A Yes. Order the MAC500 In-Wall
Accessory with the JWD Swing
Arm Mount.
HOW TO ORDER
1. Determine the swing arm that
best fits your installation needs.
Order the PNR-xxxx or PNRU
for a dual swing arm solution or
a MWR-xxxx or MWRU for a single
swing arm solution
2. Choose the color that will work
with your installation. For example,
if you plan to install a black
PWRU, order the PAC500B.
3. Fax or e-mail your order to
Customer Service at
877.894.6918 (domestic) or
952.894.6918 (international), or
orders@chiefmfg.com.
EXTRA-LARGE FLAT PANEL
IN-WALL ACCESSORY
PAC500 IN-WALL ACCESSORY
Designed to hide the MWR and PNR Swing Arm in the wall. Takes installations
from low profile to no profile!
■ Designed to hide the MWR or
PNR in the home position
SPECIFICATIONS RECOMMENDED ACCESSORIES PAGE
Box Dimensions 30” x 20” x 3.9”
WxHxD (762 x 508 x 99 mm)
Color White
Max Screen
Size 65”
Weight
Capacity 200 lbs (90.7 kg)
PAC500 in closed position
■ Aesthetic Design
Hides the swing arm mount
in the wall, or extends up to
25” (630 mm).
PAC500 shown with the PNR
(sold separately)
■ Pre-Wiring Capability
52 USA / INTERNATIONAL P 800.582.6480 F 877.894.6918 P 952.894.6280 F 952.894.6918 www.chiefmfg.com
Includes junction box and signal
knockouts on both top and bottom
of the box for ultimate flexibility.
■ Complete Installation
Kit includes all mounting components,
including trim to finish the installation.
■ No Profile
Takes a standard 4”
(101.6 mm) swing arm
installation to less than
1” (25 mm).
■ Solid Steel Construction
Steel in-wall box provides a
solid installation.
PAC500 In-Wall Accessory
Conceals the PNR swing arm in the
wall for a no-profile solution!
(PNR sold separately)
PAC300* Side Speaker Adapter 64
PAC301* Center Channel Speaker Adapter 64
*Confirm that the combined weight of the screen and accessory will not exceed the mount’s rated capacity.
Note: Swing-arm mounts cannot be used with PAC125, PAC126 or ENS Lateral Shift accessories.