TKF 8451 A 30 TKF 8451 AG 30 Dryer Kuivaaja - Blomberg
TKF 8451 A 30 TKF 8451 AG 30 Dryer Kuivaaja - Blomberg
TKF 8451 A 30 TKF 8451 AG 30 Dryer Kuivaaja - Blomberg
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5 Maintenance and cleaning<br />
Service life of the product extends and<br />
frequently faced problems decrease if<br />
cleaned at regular intervals.<br />
B<br />
This product must be unplugged<br />
during maintenance and cleaning<br />
works (control panel, body, etc.).<br />
Lint Filter / Loading Door Inner<br />
Surface<br />
Lint and fibres released from the laundry<br />
to the air during the drying cycle are<br />
collected in the Lint Filter.<br />
C<br />
*Such fibre and lint are generally<br />
formed during wearing and washing.<br />
A Always clean the lint filter and the<br />
inner surfaces of the loading door<br />
after each drying process.<br />
C You can clean the lint filter housing<br />
with a vacuum cleaner.<br />
To clean the lint filter:<br />
1. Open the loading door.<br />
2. Remove the lint filter by pulling it up<br />
and open the lint filter.<br />
3. Clean lint, fibre, and cotton raveling<br />
by hand or with a soft piece of cloth.<br />
4. Close the lint filter and place it back<br />
into its housing.<br />
C A layer can build up on the lint filter<br />
pores that can cause clogging of the<br />
lint filter after using the machine for a<br />
while. Wash the lint filter with warm<br />
water to remove the layer that builds<br />
C<br />
24 EN<br />
up on the lint filter surface. Dry the lint<br />
filter completely before reinstalling it.<br />
Clean the entire inner surface of<br />
the loading door and loading door<br />
gasket.<br />
Cleaning the sensors