Microprocessed electrosurgical unit for high-power ... - medicomercio

Microprocessed electrosurgical unit
for high-power surgery
Certified by
INMETRO

SS !601MC
microprocessed
electrosurgical
unit
Once again ahead of its own time, WEM
has developed another medical instrument. It
has designed an extension to the surgeon’s
work by producing the kind of equipment in
which technology flows and that goes
beyond limits in order to serve health.
The SS!601MC model microprocessed
electrosurgical unit has been conceived to
offer agility as well as safety.
It is adequate to all kinds of surgery and
meets the cutting and coagulation
requirements in transurethral resection and
prostate electrovaporization, cardiovascular,
gynecological, gastroenterological and
orthopedic
surgeries,
neurosurgery
as well as
microsurgery
of the hand,
among others.
SS!601MC coupled to
the Beamer Plus Argon
beam coagulator
The combination of technology
and evolution at your fingertips
Power
"Fully microprocessed
"Automatic power adjustment for all kind of tissue
" Controls the operation, checks for deviations and makes the necessary corrections automatically
" Remote power control through the hand-switching pencil gives the surgeon total control
" Allows coupling with Argon Beam Coagulator (see figure)
" Digital power display provides precise output power indication in all operation modes
Precision
" Automatic bipolar mode
" Bipolar cutting and coagulation
" Three coagulation options
" Power peak automatic system
facilitates the start of incisions
" Ten non-volatile program memories (keep the
data after the equipment has been turned off)
Argon Beam Coagulation
Safety
" Automatic voltage selection, avoids damage risks due to improper connections to the
electrical power source
" Watertight front panel prevents liquids from entering and facilitates disinfection
" Port for computer connection and equipment diagnosis (optional)
" Isolated power outputs minimize the risk of burns
" Two independent outputs for hand-switching pencils that permit the simultaneous work of two
surgeons
" The Patient-Plate Monitoring (PPM) system in conjunction with the Bargraph display
(resistance indicator) increases safety against plate burns
" Complies with IEC 6011 and IEC 60122 safety standards
Maximum Output Power
Outlet Mode Power (Watts) Load (Ohms)
Pure 300
Cut Blend 1 250
Blend 2 200
Monopolar Blend 3 150 50-2000
Spray 120
Coagulation Forced 120
Soft 120
Bipolar
Microcoagulation
Coagulation cut
35
70
10
10-1000
Technical Specifications
Mains Voltage: 100-240 VAC – 50/60 Hz
Operational frequency: 500 KHz
Dimensions: 16.5 x 31.0 x 49.0 cm (height x width x depth)
Weight: 7.5 kg (without the transport unit)
Registration in the Health Ministry under n° 10247670026
We reserve the right to make technical changes to the products without previous notice.
Rua Mal. Mascarenhas de Moraes, 550 - Parque Industrial Lagoinha - CEP 14095-120
Phone: + 55 (16) 629-4600 - Fax: +55 (16) 629-7337 - Ribeirão Preto - SP - Brazil
E-mail: wem@wem.com.br - Home Page: www.wem.com.br