23632 ccl_Novellini Install guide:CCL Installation Guide
23632 ccl_Novellini Install guide:CCL Installation Guide
23632 ccl_Novellini Install guide:CCL Installation Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>23632</strong> <strong>ccl</strong>_<strong>Novellini</strong> <strong>Install</strong> <strong>guide</strong>:<strong>CCL</strong> <strong>Install</strong>ation <strong>Guide</strong> 21/5/08 11:43 Page 4<br />
Fig. 10<br />
Place trough into the Linear Wet-Deck and mark through pre-drilled holes. Remove trough and<br />
drill 12 x 3.5mm holes, as marked.<br />
Fig. 12<br />
Fig. 11<br />
Replace trough and use 12 x Pozi screws to fix.<br />
Seal with the polysulphide Tilesafe Jointing Compound (part of the Tilesafe kit) and screw the<br />
waste top through the 50mm hole in the trough and tighten using the key provided.<br />
Fig. 13<br />
The Linear Wet-Deck installation is now complete and requires waterproofing. Full instructions for<br />
RIW Tilesafe are included in the Tilesafe Membrane kit or can be found at www.tile-safe.co.uk.<br />
Fig. 14<br />
Use the spacers provided to adjust the height of the stainless steel removable grid frame to finish<br />
approximately 1mm below the tile.<br />
<strong>Novellini</strong> (UK) Ltd, <strong>Novellini</strong> House, Orchard Trading Estate, Toddington, Nr Cheltenham, Gloucestershire, GL54 5EB<br />
T: 01256 766757 F: 01242 622150 W: www.novellini.com
Change language