PRODUCT INFORMATION FITTING INFORMATION ... - Oticon

More documents

Recommendations

Info

<strong>FITTING</strong> <strong>INFORMATION</strong> Program Manager The Program Manager offers full fl exibility to program the 3-position switch with any desired combination of M and T as well as an optional OFF position. The default programming is: M-MT-T Managing programs You can use the Program Manager to reconfi gure the switch to suit individual client needs. Options include different programs for different listening environments or for comparison of Identities or rationales. For 2 different M programs using the same Identity, click P2 then choose “Copy P1”. You can modify P2 after opening it from the tool bar. Change T programs by choosing the appropriate program button (P2/P3) containing a telecoil function, then adjusting the MT or T response shaping by using the channel trimmers. Click “unlock” to make NL adjustment in MT or T. The telecoil has 6 dB more gain available than the M. To boost the T in an MT program, select input level trimmers and increase gain. Then decrease the M relative to the increase of the T trimmer. FM/DAI When the FM/DAI shoe is connected, the T program becomes “FM only” and the MT becomes “M+FM” by default through an automatic detection. You can choose to disable this automatic detection to allow use of the telecoil while an FM/DAI shoe is still connected. 6 Identity selector The Sumo DM Identities provide an effective way to prescribe varying degrees of gain, compression and noise management to address client differences in age, previous experience and auditory resolution abilities. The Sumo DM Identity Selector is the intuitive tool for selecting Identities and is accessible from the Genie Fitting step in any general program. This tool allows you to compare and change Identities. Consider changing to a neighbor Identity if the client reports a general dissatisfaction or overall diffi culties. Changing Identity will change the gain and compression characteristics. Sumo DM features 4 unique Identities: Dynamic, Active, Gradual and Classic. Click on “i” to access Identities description. Note: It can take up to 20 second before automatics like the TriState Noise Management will fully adapt to the environment. Therefore, care should be taken when comparing two Identities using the Identity Selector. End Session step To end the fi tting session, go to “End Session”. Audible and visual status indicators are set from the end-session step (see table on page 7). Loudness and frequency of beeps can be changed if needed. To exit Genie, click the Save, Program and Exit button.
Sumo Live Sumo Live is accessed from the Sumo DM Fitting Panel. It enables you to explore and explain the performance and benefi ts of Sumo DM in real time: TriState Noise Management – shows how the instrument adapts to the sound environment by applying the three noise management strategies (Speech, speech in noise and noise only). Amplifi cation strategy – shows how the instrument manages gain and compression across all eight channels. Environment Identifi cation – shows the intensity level of sound in each of Sumo DM’s channels and if feedback i detected. Genie Sound Studio Genie Sound Studio is an advanced sound scene builder. In other words you can optimise a specifi c (sound) situation to either: a. Illustrate and explore unique product features – such as the Tristate Noise Management b. Re-construct a specifi c situation in which your client experiences listening challenges, enabling individualised and problem solving counselling. The Genie Sound Studio is accessed by clicking the “Sound and Pictures” button in the tools menu. Instrument ready Program switch VC preferred level setting Instrument On indicator Battery low indicator Audible beeps Visual status indicator (LED) The instrument will beep according to the program that is active, when the instrument is ready The instrument will beep according to the program selected.This feature can be disabled. The instrument will beep when the preferred VC level is reached. This feature can be disabled. The instrument provides a series of two beeps when the battery is low. The visual status indicator will fl ash according to the program that is active, when the instrument is ready The visual status indicator will fl ash according to the program selected Follows audible beep setting The visual status indicator will fl ash when the preferred VC level is reached This feature can be disabled. The visual status indicator can be turned steady On, while the instrument is working. This is default below age 8. The feature can be enabled or disabled. If steady light is enabled, it will turn permanently Off when Battery Low beeps are activated to indicate the battery should be changed. 7
Page 1 and 2: PRODUCT INFORMATION FITTING INFORMA
Page 3 and 4: dB HL -10 0 10 20 30 40 50 60 70 80
Page 5: The Fitting step displays the contr
Page 9 and 10: TECHNICAL INFORMATION BTE SUPER POW

PRODUCT INFORMATION FITTING INFORMATION ... - Oticon

Create successful ePaper yourself

Delete template?

Save as template?