Freescale MQX™ RTOS 3.6.2 Release Notes
Freescale MQX™ RTOS 3.6.2 Release Notes
Freescale MQX™ RTOS 3.6.2 Release Notes
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
o Compiling MCF5xxx FEC code generates error message if un-cached memory<br />
support is disabled in MQX configuration.<br />
- MFS Filesystem:<br />
o The CLUSTER_SIZE_BYTES member of MFS_DRIVE_STRUCT is now extended to<br />
32 bit to avoid size overflow in case of 65k cluster size (solves some USB memory<br />
stick problems).<br />
o Hidden attribute checking was fixed in MFS_Attribute_match() function.<br />
o MFS write/append performance problem was solved by avoiding unnecessary sector<br />
reading.<br />
- SHELL Library:<br />
o Memory violation error fixed in the shell “help” command implementation.<br />
- USB Host Stack:<br />
o USB Host HUB class enhanced to support asynchronous status inquires.<br />
o USB CDC Host driver now waits for control transactions to ACM interface to<br />
complete. This fixes a problem of invalid memory access with some CDC devices.<br />
o KHCI USB bus control is deactivated after device is detached. This avoids problems<br />
where noise on detached bus was evaluated as a valid communication.<br />
o KHCI USB data bus weak pull-down resistors enabled to improve detection of<br />
reset/detach event.<br />
o EHCI fixed to toggle data tokens correctly when a transfer has odd number of<br />
transactions.<br />
- Example applications:<br />
o Digital sign demo running on TWR-MPC5125 now runs the display task with higher<br />
priority than the network task. This fixes a problem where images were displayed<br />
after 3 minutes ARP timeout when board was not connected to network.<br />
o Bar-graph CGI code in HTTP Server demo now reads ADC channels properly.<br />
o msCAN example application fixed on TWR-MPC5125.<br />
- Task Aware Debugger plug-in for CodeWarrior<br />
- Other:<br />
o The value of SR register is now displayed correctly in context of any tasks being<br />
examined.<br />
o New Version Checker tool was fixed so it always runs in a single instance. Each of<br />
the TAD DLLs (current version and all backward-compatibility versions) starts an<br />
instance of the web checker tool upon CodeWarrior start. Running the tool in multiple<br />
instances was causing problems with loading the webchk.wcp configuration file or<br />
resulted in multiple “New Version Available” notifications being displayed.<br />
Version 3.6.1 (Aug 31 st 2010)<br />
- MCF51MM-based TWR-MCF51MM Board Support Package was added<br />
o Standard set of peripheral drivers is enabled: FLASHX, GPIO, I2C, INT_CTRL,<br />
UART, SPI, RTC, CF card, ADC, DAC, SD card<br />
o New driver was added: DAC (API driver).<br />
<strong>Freescale</strong> MQX <strong>Release</strong> <strong>Notes</strong><br />
38 <strong>Freescale</strong> Semiconductor