Pulse Oximeter Using USB PHDC - Freescale Semiconductor
Pulse Oximeter Using USB PHDC - Freescale Semiconductor
Pulse Oximeter Using USB PHDC - Freescale Semiconductor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Running the Demo<br />
Figure 9. Assembling secondary Elevator<br />
4. Take the MED-SPO2 board. Connect the pins on the MED-SPO2 board to the medical connector on the TWR-<br />
K53N512 board. Pin enumeration on the MED-SPO2 board must be mirrored with the pin enumeration on the TWR-<br />
K53N512 board (see the image below).<br />
<strong>Pulse</strong> <strong>Oximeter</strong> <strong>Using</strong> <strong>USB</strong> <strong>PHDC</strong>, Rev. 0, 03/2012<br />
14 <strong>Freescale</strong> <strong>Semiconductor</strong>, Inc.
Change language