Pulse Oximeter Using USB PHDC - Freescale Semiconductor

More documents

Recommendations

Info

$Set of General Math and Motor Control Functions for ARM Cortex ...$

Running the Demo 4.2 Demo Execution 1. Download and install HealthLink®. It can be found on the Lamprey Networks web page www.lnihealth.com . Figure 12. LNI Health web page 2. Connect an A to mini B USB cable from the computer to the TWR-SER USB port. Figure 13. Connecting USB to TWR-SER 3. If a window asking for the USB PHDC drivers pops up, select the option “Install the drivers automatically”. Drivers are copied to the system folder during the HealthLink® program installation. Pulse Oximeter Using USB PHDC, Rev. 0, 03/2012 16 Freescale Semiconductor, Inc.
Figure 14. Installing the PHDC drivers 4. Execute the HealthLink® program. If it is the first time you use the program it will request you to create an account. Create a user account selecting your health data provider (i.e. Google Health, Microsoft HealthVault, etc...). If you don’t have a health data provider you can use the option “Save to disk”. Figure 15. Creating an account 5. Place the pulse oximeter sensor on the index finger as shown in the image below. Pulse Oximeter Using USB PHDC, Rev. 0, 03/2012 Running the Demo Freescale Semiconductor, Inc. 17
Page 1 and 2: Freescale Semiconductor Application
Page 3 and 4: For a better understanding of this
Page 5 and 6: Figure 3. Agent's state machine Pul
Page 7 and 8: 0x00, 0x02, /* AttrValMap.count = 2
Page 9 and 10: Figure 4. MED-SPO2 Agent representa
Page 11 and 12: 4.1 Hardware Set In order to assemb
Page 13 and 14: Running the Demo Figure 7. Assembli
Page 15: Figure 10. Analog front end placeme
Page 19 and 20: • The communication protocol is b

Pulse Oximeter Using USB PHDC - Freescale Semiconductor

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?