KIP 3000 - NovaCopy

More documents

Recommendations

Info

9. Rewind the roll paper to place the leading edge as the following photo. 10. Close the Roll Deck (1). NOTE Be sure to close the Roll Deck fully until it is locked at the correct position. A paper jam may occur if it is not locked firmly. 11. On the Operator Panel, a screen will automatically appear after the deck is closed to define the media width and type. Please select the width, and type for each roll deck and then select the “OK” button to confirm the selection. 1-20 1 Place the leading edge here. Section 1 Basic Printer Functions
2. 4 Toner Installation When toner installation is required, the Operator Panel will display a “Toner Required” screen (in the “Copy” and “Job Info” Screens) To replace the toner cartridge, please follow these steps: Please note that the replacement procedure can also be displayed on the Operator Panel for easier access, by pressing “User Guide : Changing Toner” on the screen) 1. Open the Toner Hatch (1). 1 2. Slide the green Lever (2) to the right to unlock the Toner Cartridge. (Lever (2) is held automatically.) 1-21 2 Section 1 Basic Printer Functions
Page 1 and 2: KIP 3000 User Guide Version C.1
Page 3 and 4: Safety Warnings The following warni
Page 5 and 6: CAUTION Do not install the printer
Page 7 and 8: Section 1 Basic Printer Functions 1
Page 9 and 10: 1. 2 Prohibited Originals To duplic
Page 11 and 12: 1. 4 Specifications General Subject
Page 13 and 14: Scanner Subject Specification Scann
Page 15 and 16: 1. 5. 2 Rear view 2 3 4 5 No. Name
Page 17 and 18: 2 3 Scan Mode 5 4 1 6 No. Name Func
Page 19 and 20: 3 2 Information / Help Screen No. N
Page 21 and 22: 2.1 Turning on the KIP 3000 1. Ensu
Page 23 and 24: NOTE Please confirm that the machin
Page 25: NOTE For Roll 2, rotate the Paper F
Page 29 and 30: 6. There is a pin (6) on the left s
Page 31 and 32: 2. 5 Cut Sheet Media Placement 1. S
Page 33 and 34: 6. There are size markings on the t
Page 35 and 36: 3. 1 Operational Errors 3. 1. 1 Pap
Page 37 and 38: 4. Slide the Cutter Knob (5) fully
Page 39 and 40: 3. 1. 1. 3 Reg. Jam / Internal Jam
Page 41 and 42: 4. Open the Exit Cover (2). 5. Remo
Page 43 and 44: 3. 1. 2 Others 3. 1. 2. 1 Deck open
Page 45 and 46: 3. 1. 2. 7 The door opened during t
Page 47 and 48: 4. 1 User Maintenance 4. 1. 1 Scann
Page 49 and 50: 4. 1. 2 Print Engine Clean each Gui
Page 51 and 52: 4. 1. 3 Touch Screen Clean the Touc
Page 53 and 54: 2.8.4 Auto Zoom....................
Page 55 and 56: 1.2 Simple Copying To copy, please
Page 57 and 58: 1.2.5 Media Selects automatic (for
Page 59 and 60: 2. 0 Operation Details 2.1 Main Scr
Page 61 and 62: 2.3.2 Threshold To override the “
Page 63 and 64: c) Copying will not commence until
Page 65 and 66: 2.5.3 Fold Select “Fold” to dis
Page 67 and 68: 2.5.5 Leading Edge Adjustment The l
Page 69 and 70: 2.6.1 Auto This default setting all
Page 71 and 72: Select desired settings from the ma
Page 73 and 74: 2.7 Length Two methods determine th
Page 75 and 76: e) Custom Length - set the custom l
Page 77 and 78:
2.8.3 Page Size Zoom To enter a zoo
Page 79 and 80:
2.12 Stop / Reset This button has t
Page 81 and 82:
1. 0 Copy Mode - Color 1 1.1 Main S
Page 83 and 84:
1.2.3 Select Original Image Type -
Page 85 and 86:
1.2.7 Size Select a) AutoZoom to au
Page 87 and 88:
2.2.2 Original Type - Input Select
Page 89 and 90:
2.4.3 Set Copy Has no function in C
Page 91 and 92:
2.5.4 Trailing Edge Adjustment The
Page 93 and 94:
2.6.3 Custom This mode allows the o
Page 95 and 96:
2.7.2. Percentage Key Pad To enter
Page 97 and 98:
2.8. Start The copier is always set
Page 99 and 100:
3 2 1. 0 Scan Mode - Monochrome 1.1
Page 101 and 102:
1.2.3 Select Original Image Type Se
Page 103 and 104:
1.2.5 Select Mailbox Select the loc
Page 105 and 106:
2.2.2 Original Type Select one of t
Page 107 and 108:
d) Select a standard size length or
Page 109 and 110:
2.4.3 Density To override the “Au
Page 111 and 112:
2.7 Advanced Settings The Advanced
Page 113 and 114:
2.7.4 Leading Edge Adjustment The l
Page 115 and 116:
2.8 Mailbox This region of the Scan
Page 117 and 118:
c) Select Mailbox Name. A screen ke
Page 119 and 120:
d) Touch Domain button to enter the
Page 121 and 122:
It is possible to scan all file for
Page 123 and 124:
2.9 Start No function at this time
Page 125 and 126:
2 1 1. 0 Scan Mode - Color 1.1 Main
Page 127 and 128:
This will allow automatic image qua
Page 129 and 130:
2. 0 Operation Details 2.1 Main Scr
Page 131 and 132:
) Or use Custom to select a width.
Page 133 and 134:
2.6 Advanced Settings The Advanced
Page 135 and 136:
2.7 Mailbox This region of the Scan
Page 137 and 138:
c) Select Mailbox Name. A screen ke
Page 139 and 140:
c. Some facilities will have user c
Page 141 and 142:
It is possible to scan all file for
Page 143 and 144:
2.8 Start No function at this time
Page 145 and 146:
2 1. 0 Job Info Screen 1.1 Main Scr
Page 147 and 148:
2.2 User Name Displays the “Name
Page 149 and 150:
2.7 Delete To remove a job from the
Page 151 and 152:
2.9 To Top If a job in the list is
Page 153 and 154:
2.13 Change Media Information At th
Page 155 and 156:
4. Users have the option to change
Page 157 and 158:
1.0 Help - Configuration Screen 1.1
Page 159 and 160:
2.0 Main Screen - Details 2.1 Infor
Page 161 and 162:
2.1.9 Machine Serial Number Display
Page 163 and 164:
4.0 Configuration There are six pag
Page 165 and 166:
4.3 Monochrome Quality Settings Cli
Page 167 and 168:
Page 3 of 6 4.9 Language Set the UI
Page 169 and 170:
4.12 Fold Sets the system to accept
Page 171 and 172:
Page 6 of 6 4.18 Copy Density Sets
Page 173 and 174:
5.3 Media Type Only some models of
Page 175 and 176:
How to calibrate the KIP 600 for Co
Page 177 and 178:
1. 0 Introduction 1.1 Introduction
Page 179 and 180:
2. 0 Function Details 2.1 Output Fo
Page 181 and 182:
This feature is very important in w
Page 183 and 184:
2.14 Stamps The KIP Windows driver
Page 185 and 186:
3.2 Installation Process - Automati
Page 187 and 188:
Right-Click on “KIP Printer” an
Page 189 and 190:
e) Browse to the appropriate operat
Page 191 and 192:
c) From the Control Panel - Printer
Page 193 and 194:
f) Depending on your operating syst
Page 195 and 196:
k) Completing the Add Printer Wizar
Page 197 and 198:
4.0 Appendix 4.1 File Structure Ove
Page 199 and 200:
4.2 Printing Hints • Issue: Adobe
Page 201 and 202:
1.0 Overview and Features The KIP A
Page 203 and 204:
2.0 Connection 2.1 Options There ar
Page 205 and 206:
4) Identify your plotter / printer
Page 207 and 208:
4.0 Configuration Click on File, an
Page 209 and 210:
4) By clicking the “Link” to th
Page 211 and 212:
10 8 5.0 Custom Settings 9 6 7 1 2
Page 213 and 214:
5.2 Plot Identification The followi
Page 215 and 216:
5.4 Raster Image Control 5.4.1 Gamm
Page 217 and 218:
6.0 Appendix 6.1 Accounting Feature
Page 219 and 220:
2.5.4.6 Stamp Placement And Margin
Page 221 and 222:
1.2 Main Screen 1 2 11 10 9 3 4 No.
Page 223 and 224:
6) Complete any Key Job Settings th
Page 225 and 226:
c) If an invalid file is selected,
Page 227 and 228:
c) Select a predetermined Fold. (se
Page 229 and 230:
2.4.8 Pen Table This field displays
Page 231 and 232:
2.5.1.4 Border This allows a border
Page 233 and 234:
2.5.2.3 Clip to Image Size This cro
Page 235 and 236:
2.5.3 Enlarge / Reduce This button
Page 237 and 238:
2.5.3.10 Refresh Image After any se
Page 239 and 240:
2.5.4.8 Text / Graphic Gap - Text F
Page 241 and 242:
(Method A) 2.5.5.1 Use Folder Setti
Page 243 and 244:
2.5.9 Quick View Click on this butt
Page 245 and 246:
2.8.2.4 View selected image This al
Page 247 and 248:
4. At this point the selected job c
Page 249 and 250:
2.8.6 Transfer See Section 3.0 for
Page 251 and 252:
2) Click on KIP Mailbox and listed
Page 253 and 254:
4. 0 KIP 3000 Copier Configurations
Page 255 and 256:
5.2 Connection to KIP Printers Once
Page 257 and 258:
6. 0 Appendix 6.1 Folding - Technic
Page 259 and 260:
6.2 INI Configuration Custom Settin
Page 261 and 262:
AutoRecognize=c:\programs\DS\MAD.ex
Page 263 and 264:
[KipPortPrinters] PrinterName1=~KIP
Page 265 and 266:
PrintNet Accounting fields entered
Page 267 and 268:
10-50 Section 10 KIP Request
Page 269 and 270:
3. Meter Reading This report will i
Page 271 and 272:
After clicking on “Submit Print J
Page 273 and 274:
1.0 Preview / Main Screen KIP Print
Page 275 and 276:
2.0 Operation Details 2.1 Login Scr
Page 277 and 278:
information, please see Installatio
Page 279 and 280:
2.12 Email Confirmation Users may e
Page 281 and 282:
Edit Job To edit a job, right click
Page 283 and 284:
3.4 Host PC Installation 1. Ensure
Page 285 and 286:
c) Media type Available media types
Page 287 and 288:
5.1 Administrative Screen 1 Home Sc
Page 289 and 290:
Printer Error Message E-Mail is sen
Page 291 and 292:
5.3 Printer Configuration NOTE: Und
Page 293 and 294:
5.4 Job History The Job History scr
Page 295 and 296:
6.0 Appendix Other Web Browsers Thi
Page 297 and 298:
KIP PrintNET installs the following
Page 299 and 300:
Section 12 Productivity Reports 1.0
Page 301 and 302:
KIP 3000 User Log on Screen On the
Page 303 and 304:
2.1 Printing This report will inclu
Page 305 and 306:
2.3 Meter Reading This report will
Page 307 and 308:
c) The Total Run is a meter that co
Page 309 and 310:
3.8 Sample Report: This is an examp
Page 311 and 312:
4.2 Email Address Support. The Prin
Page 313 and 314:
1.0 IP Addressing 1.1 Configuration
Page 315 and 316:
1.2.1 DHCP / Manual IP Assigment a)
Page 317 and 318:
1.2.3 DHCP / Manual WINS Assignment
Page 319 and 320:
Connectivity - Appendix A Printing
Page 321 and 322:
; MICROSTATION starts counting pens
Page 323 and 324:
Connectivity - Appendix B Configuri
Page 325 and 326:
4. Under “Internet Printer“ cli
Page 327 and 328:
Connectivity - Appendix C Configuri
Page 329 and 330:
4. Find the “Printer Setup Utilit
Page 331 and 332:
8. Select “Add” 9. The printer
Page 333 and 334:
Connectivity - Appendix D Introduct
Page 335 and 336:
KIP Printer Network Components KIP
Page 337:
• Native mode: Native mode refers
Page 340 and 341:
NOVELL NETWORK CONNECTIVITY Windows
Page 343 and 344:
KIP 3000 Network Connectivity Unix
show all

KIP 3000 - NovaCopy

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?